public static void OnInspectorGUI_S(RoomStyle roomStyle)
{
BuildingEditor.BuildRHeader("Room Style");
EditorGUILayout.BeginHorizontal();
EditorGUILayout.LabelField("Name", GUILayout.Width(120));
string newName = EditorGUILayout.DelayedTextField(roomStyle.name);
if (newName != roomStyle.name)
{
nameError = BuildingEditorUtils.RenameAsset(roomStyle, newName);
}
EditorGUILayout.EndHorizontal();
if (nameError.Length > 0)
{
EditorGUILayout.HelpBox(nameError, MessageType.Error);
}
EditorGUILayout.BeginVertical("Box");
EditorGUILayout.LabelField("Surfaces");
roomStyle.floorSurface = (Surface)EditorGUILayout.ObjectField("Floor", roomStyle.floorSurface, typeof(Surface), false);
roomStyle.wallSurface = (Surface)EditorGUILayout.ObjectField("Wall", roomStyle.wallSurface, typeof(Surface), false);
roomStyle.ceilingSurface = (Surface)EditorGUILayout.ObjectField("Ceiling", roomStyle.ceilingSurface, typeof(Surface), false);
EditorGUILayout.EndVertical();
}
private void OnEnable()
{
_roomStyle = (RoomStyle)target;
bMesh = new BuildRMesh("preview mesh");
float width = 3;
float height = 1.5f;
Vector3 v0 = new Vector3(-width, -height, -width);
Vector3 v1 = new Vector3(width, -height, -width);
Vector3 v2 = new Vector3(-width, -height, width);
Vector3 v3 = new Vector3(width, -height, width);
Vector3 v4 = new Vector3(-width, height, -width);
Vector3 v5 = new Vector3(width, height, -width);
Vector3 v6 = new Vector3(-width, height, width);
Vector3 v7 = new Vector3(width, height, width);
bMesh.AddPlane(v0, v1, v2, v3, 0);
bMesh.AddPlane(v1, v0, v5, v4, 1);
bMesh.AddPlane(v3, v1, v7, v5, 1);
bMesh.AddPlane(v0, v2, v4, v6, 1);
bMesh.AddPlane(v2, v3, v6, v7, 1);
bMesh.AddPlane(v6, v7, v4, v5, 2);
mesh = new Mesh();
bMesh.submeshLibrary.enabled = false;
bMesh.Build(mesh);
}
private static RoomStyle MenuCreateNewRoomStyleB()
{
RoomStyle output = CreateRoomStyle();
UnityEditor.Selection.activeObject = output;
return(output);
}
public static RoomStyle CreateRoomStyle()
{
RoomStyle roomStyle = CreateInstance <RoomStyle>();
#if UNITY_EDITOR
UnityEditor.AssetDatabase.CreateAsset(roomStyle, AssetCreator.GeneratePath("newRoomStyle.asset", "RoomStyles"));
UnityEditor.AssetDatabase.SaveAssets();
UnityEditor.AssetDatabase.Refresh();
#endif
return(roomStyle);
}
public static void Generate(IBuilding building, IVolume volume, IFloorplan floorplan, int volumeFloor, VerticalOpening[] openings, BuildRMesh mesh, BuildRCollider collider)
{
SubmeshLibrary submeshLibrary = mesh.submeshLibrary;
bool generateColliders = building.colliderType != BuildingColliderTypes.None;
bool generateMeshColliders = building.colliderType != BuildingColliderTypes.Primitive && generateColliders;
BuildRCollider sendCollider = (generateColliders) ? collider : null;
collider.thickness = volume.wallThickness;
if (!generateMeshColliders)
{
collider = null;
}
float wallThickness = volume.wallThickness;
float wallUp = volume.floorHeight - wallThickness;
Vector3 wallUpV = Vector3.up * wallUp;
Vector3 floorBaseV = Vector3.up * volume.baseHeight;
int roomCount = floorplan.RoomCount;
int actualFloor = building.VolumeBaseFloor(volume) + volumeFloor;
int openingCount = openings.Length;
bool[] openingBelow = new bool[openingCount];
bool[] openingAbove = new bool[openingCount];
FlatBounds[] openingBounds = new FlatBounds[openingCount];
Vector2[][] openingShapes = new Vector2[openingCount][];
bool[] openingUsedInThisFloor = new bool[openingCount];
for (int o = 0; o < openingCount; o++)
{
VerticalOpening opening = openings[o];
if (!openings[o].FloorIsIncluded(actualFloor))
{
continue;
}
openingBelow[o] = opening.FloorIsIncluded(actualFloor - 1);
openingAbove[o] = opening.FloorIsIncluded(actualFloor + 1);
openingShapes[o] = opening.PointsRotated();
openingBounds[o] = new FlatBounds(openingShapes[o]);
submeshLibrary.Add(opening.surfaceA);
submeshLibrary.Add(opening.surfaceB);
submeshLibrary.Add(opening.surfaceC);
submeshLibrary.Add(opening.surfaceD);
}
Dictionary <int, List <Vector2Int> > externalWallAnchors = volume.facadeWallAnchors;
Room[] rooms = floorplan.AllRooms();
for (int r = 0; r < roomCount; r++)
{
Room room = rooms[r];
int pointCount = room.numberOfPoints;
Surface floorSurface = null;
Surface wallSurface = null;
Surface ceilingSurface = null;
if (room.style != null)
{
RoomStyle style = room.style;
floorSurface = style.floorSurface;
wallSurface = style.wallSurface;
ceilingSurface = style.ceilingSurface;
}
int floorSubmesh = submeshLibrary.SubmeshAdd(floorSurface);
int wallSubmesh = submeshLibrary.SubmeshAdd(wallSurface);
int ceilingSubmesh = submeshLibrary.SubmeshAdd(ceilingSurface);
FloorplanUtil.RoomWall[] walls = FloorplanUtil.CalculatePoints(room, volume);
Vector2[] roomArchorPoints = FloorplanUtil.RoomArchorPoints(walls);
Vector4 tangent = BuildRMesh.CalculateTangent(Vector3.right);
Vector2[] offsetRoomAnchorPoints = QuickPolyOffset.Execute(roomArchorPoints, wallThickness);
FlatBounds roomBounds = new FlatBounds(offsetRoomAnchorPoints);
List <Vector2[]> floorCuts = new List <Vector2[]>();
List <Vector2[]> ceilingCuts = new List <Vector2[]>();
List <VerticalOpening> roomOpenings = new List <VerticalOpening>();
for (int o = 0; o < openingCount; o++)
{
if (openings[o].FloorIsIncluded(actualFloor))
{
if (roomBounds.Overlaps(openingBounds[o]))
{
if (CheckShapeWithinRoom(offsetRoomAnchorPoints, openingShapes[o]))
{
if (openingBelow[o])
{
floorCuts.Add(openingShapes[o]);
}
if (openingAbove[o])
{
ceilingCuts.Add(openingShapes[o]);
}
if (openingAbove[o] || openingBelow[o])
{
roomOpenings.Add(openings[o]);
openingUsedInThisFloor[o] = true;
}
}
}
}
}
int offsetPointBase = 0;
for (int p = 0; p < pointCount; p++)//generate room walls
{
FloorplanUtil.RoomWall wall = walls[p];
int wallPointCount = wall.offsetPoints.Length;
List <RoomPortal> wallPortals = floorplan.GetWallPortals(room, p);
int wallPortalCount = wallPortals.Count;
if (!wall.isExternal)
{
int indexA = offsetPointBase;
int indexB = (offsetPointBase + 1) % roomArchorPoints.Length;
Vector2 origBaseA = roomArchorPoints[indexA];
Vector2 origBaseB = roomArchorPoints[indexB];
Vector2 baseA = offsetRoomAnchorPoints[indexA];
Vector2 baseB = offsetRoomAnchorPoints[indexB];
Vector3 v0 = new Vector3(origBaseA.x, 0, origBaseA.y) + floorBaseV;
Vector3 v1 = new Vector3(origBaseB.x, 0, origBaseB.y) + floorBaseV;
Vector3 vOffset0 = new Vector3(baseA.x, 0, baseA.y) + floorBaseV;
Vector3 vOffset1 = new Vector3(baseB.x, 0, baseB.y) + floorBaseV;
if (wallPortalCount == 0) //just draw the wall - no portals to cut
{
Vector3 v2 = vOffset1 + wallUpV;
Vector3 v3 = vOffset0 + wallUpV;
Vector2 minUV = Vector2.zero;
Vector2 maxUV = new Vector2(Vector2.Distance(baseA, baseB), wallUp);
if (wallSurface != null)
{
maxUV = wallSurface.CalculateUV(maxUV);
}
Vector3 wallDir = (vOffset0 - vOffset1).normalized;
Vector3 wallNormal = Vector3.Cross(Vector3.up, wallDir);
Vector4 wallTangent = BuildRMesh.CalculateTangent(wallDir);
mesh.AddPlane(vOffset1, vOffset0, v2, v3, minUV, maxUV, wallNormal, wallTangent, wallSubmesh, wallSurface);
if (generateColliders)
{
collider.AddPlane(vOffset1, vOffset0, v2, v3);
}
}
else
{
List <float> useLaterals = new List <float>();
List <bool> hasPortals = new List <bool>();
for (int wp = 0; wp < wallPortalCount; wp++)
{
RoomPortal portal = wallPortals[wp];
bool hasPortal = room.HasPortal(portal);
hasPortals.Add(hasPortal);
if (hasPortal)
{
useLaterals.Add(portal.lateralPosition);
}
else
{
useLaterals.Add(1 - portal.lateralPosition);//portal from other wall - wall orientation is flipped
}
}
Vector3 wallVector = vOffset1 - vOffset0;
Vector3 wallDirection = wallVector.normalized;
Vector3 wallStart = vOffset0;
Vector4 wallTangent = BuildRMesh.CalculateTangent(wallDirection);
Vector3 wallNormal = Vector3.Cross(Vector3.up, wallDirection);
Vector4 wallNormalTangent = BuildRMesh.CalculateTangent(wallNormal);
Vector4 wallNormalTangentReverse = BuildRMesh.CalculateTangent(-wallNormal);
while (wallPortalCount > 0)
{
int portalIndex = 0;
RoomPortal usePortal = wallPortals[0];
float lowestLat = useLaterals[0];
for (int wp = 1; wp < wallPortalCount; wp++)
{
if (useLaterals[wp] < lowestLat)
{
portalIndex = wp;
usePortal = wallPortals[wp];
lowestLat = useLaterals[wp];
}
}
wallPortals.RemoveAt(portalIndex);
useLaterals.RemoveAt(portalIndex);
wallPortalCount--;
Vector3 vl0 = v0 + (-wallNormal + wallDirection) * wallThickness;
Vector3 vl1 = v1 + (-wallNormal - wallDirection) * wallThickness;
Vector3 portalCenter = Vector3.Lerp(vl0, vl1, lowestLat);
Vector3 portalHalfvector = wallDirection * (usePortal.width * 0.5f);
Vector3 portalBase = Vector3.up * (volume.floorHeight - usePortal.height) * usePortal.verticalPosition;
Vector3 portalUp = portalBase + Vector3.up * usePortal.height;
Vector3 portalStart = portalCenter - portalHalfvector;
Vector3 portalEnd = portalCenter + portalHalfvector;
Vector2 initalWallUVMin = new Vector2(Vector3.Dot(portalStart, wallDirection), 0);
Vector2 initalWallUVMax = new Vector2(Vector3.Dot(wallStart, wallDirection), wallUp);
mesh.AddPlane(portalStart, wallStart, portalStart + wallUpV, wallStart + wallUpV, initalWallUVMin, initalWallUVMax, wallNormal, wallTangent, wallSubmesh, wallSurface);//initial wall
if (generateColliders)
{
collider.AddPlane(portalStart, wallStart, portalStart + wallUpV, wallStart + wallUpV);
}
if (usePortal.verticalPosition > 0)
{
Vector2 portalBaseUVMin = new Vector2(Vector3.Dot(portalEnd, wallDirection), 0);
Vector2 portalBaseUVMax = new Vector2(Vector3.Dot(portalStart, wallDirection), portalBase.y);
mesh.AddPlane(portalEnd, portalStart, portalEnd + portalBase, portalStart + portalBase, portalBaseUVMin, portalBaseUVMax, wallNormal, wallTangent, wallSubmesh, wallSurface);//bottom
if (generateColliders)
{
collider.AddPlane(portalEnd, portalStart, portalEnd + portalBase, portalStart + portalBase);
}
}
if (usePortal.verticalPosition < 1)
{
Vector2 portalBaseUVMin = new Vector2(Vector3.Dot(portalEnd, wallDirection), portalUp.y);
Vector2 portalBaseUVMax = new Vector2(Vector3.Dot(portalStart, wallDirection), wallUp);
mesh.AddPlane(portalEnd + portalUp, portalStart + portalUp, portalEnd + wallUpV, portalStart + wallUpV, portalBaseUVMin, portalBaseUVMax, wallNormal, wallTangent, wallSubmesh, wallSurface);//top
if (generateColliders)
{
collider.AddPlane(portalEnd + portalUp, portalStart + portalUp, portalEnd + wallUpV, portalStart + wallUpV);
}
}
if (hasPortals[portalIndex])//only do this once - from the room it's attached to
{
//portal interior frame
Vector3 portalDepth = wallNormal * wallThickness * 2;
//sides
mesh.AddPlane(portalStart + portalDepth + portalBase, portalStart + portalBase, portalStart + portalDepth + portalUp, portalStart + portalUp, wallDirection, wallNormalTangentReverse, wallSubmesh);
mesh.AddPlane(portalEnd + portalBase, portalEnd + portalDepth + portalBase, portalEnd + portalUp, portalEnd + portalDepth + portalUp, -wallDirection, wallNormalTangent, wallSubmesh);
if (generateMeshColliders)
{
collider.AddPlane(portalStart + portalDepth + portalBase, portalStart + portalBase, portalStart + portalDepth + portalUp, portalStart + portalUp);
collider.AddPlane(portalEnd + portalBase, portalEnd + portalDepth + portalBase, portalEnd + portalUp, portalEnd + portalDepth + portalUp);
}
//floor
Vector2 minFloorUv = new Vector2((portalEnd + portalBase).z, (portalEnd + portalBase).x);
Vector2 maxFloorUv = minFloorUv + new Vector2(wallThickness, usePortal.width);
mesh.AddPlane(portalStart + portalBase, portalStart + portalDepth + portalBase, portalEnd + portalBase, portalEnd + portalDepth + portalBase, minFloorUv, maxFloorUv, Vector3.up, wallTangent, floorSubmesh, floorSurface);
if (generateMeshColliders)
{
collider.AddPlane(portalStart + portalBase, portalStart + portalDepth + portalBase, portalEnd + portalBase, portalEnd + portalDepth + portalBase);
}
//ceiling
mesh.AddPlane(portalEnd + portalUp, portalEnd + portalDepth + portalUp, portalStart + portalUp, portalStart + portalDepth + portalUp, Vector3.down, wallTangent, wallSubmesh);
if (generateMeshColliders)
{
collider.AddPlane(portalEnd + portalUp, portalEnd + portalDepth + portalUp, portalStart + portalUp, portalStart + portalDepth + portalUp);
}
}
wallStart = portalEnd;//move the start for the next calculation
}
Vector2 finalWallUVMin = new Vector2(Vector3.Dot(vOffset1, wallDirection), 0);
Vector2 finalWallUVMax = new Vector2(Vector3.Dot(wallStart, wallDirection), wallUp);
mesh.AddPlane(vOffset1, wallStart, vOffset1 + wallUpV, wallStart + wallUpV, finalWallUVMin, finalWallUVMax, wallNormal, wallTangent, wallSubmesh, wallSurface);//final wall section
if (generateColliders)
{
collider.AddPlane(vOffset1, wallStart, vOffset1 + wallUpV, wallStart + wallUpV);
}
}
offsetPointBase += 1;
}
else//external anchored wall
{
int facadeIndex = wall.facadeIndex;
Facade facadeDesign = volume.GetFacade(facadeIndex);
int currentFacadeWallSectionLength = externalWallAnchors[facadeIndex].Count - 1;
int currentWallSectionIndex = wall.offsetPointWallSection[0];
int wallOffsetPoints = wall.offsetPoints.Length;
for (int w = 0; w < wallOffsetPoints - 1; w++)
{
int roomPointIndex = offsetPointBase + w;
Vector2 baseA = offsetRoomAnchorPoints[roomPointIndex];
int offsetIndexB = (roomPointIndex + 1) % offsetRoomAnchorPoints.Length;
Vector2 baseB = offsetRoomAnchorPoints[offsetIndexB];
Vector3 v0 = new Vector3(baseA.x, 0, baseA.y) + floorBaseV;
Vector3 v1 = new Vector3(baseB.x, 0, baseB.y) + floorBaseV;
int wallSectionIndex = wall.offsetPointWallSection[w];
bool canGenerateWallSection = facadeDesign != null;
Vector3 wallVector = v0 - v1;
Vector3 wallDir = wallVector.normalized;
float wallLength = wallVector.magnitude;
if (!canGenerateWallSection)
{
if (wallSurface != null)
{
submeshLibrary.Add(wallSurface);
}
Vector3 v2 = v1 + wallUpV;
Vector3 v3 = v0 + wallUpV;
Vector2 minUV = Vector2.zero;
Vector2 maxUV = new Vector2(Vector2.Distance(baseA, baseB), wallUp);
Vector3 wallNormal = Vector3.Cross(Vector3.up, wallDir);
Vector4 wallTangent = BuildRMesh.CalculateTangent(wallDir);
mesh.AddPlane(v1, v0, v2, v3, minUV, maxUV, wallNormal, wallTangent, wallSubmesh, wallSurface);
if (generateMeshColliders)
{
collider.AddPlane(v1, v0, v2, v3);
}
}
else
{
WallSection section = facadeDesign.GetWallSection(wallSectionIndex, volumeFloor, currentFacadeWallSectionLength, volume.floors);
if (section.model != null)
{
continue;//cannot account for custom meshes assume custom mesh does include interior mesh or if does - will be generated with the exterior
}
GenerationOutput generatedSection = GenerationOutput.CreateRawOutput();
Vector2 wallSectionSize = new Vector2(wallLength, wallUp + wallThickness);
bool cullOpening = building.cullDoors && section.isDoor;
SubmeshLibrary sectionLib = new SubmeshLibrary();
if (wallSurface != null)
{
sectionLib.Add(wallSurface);//add interior wall surface
submeshLibrary.Add(wallSurface);
}
sectionLib.Add(section.openingSurface);//add windows - the only surface we'll use in the interior room
submeshLibrary.Add(section.openingSurface);
float offset = 0;
if (w == 0)
{
offset = wallThickness;
}
if (w == wallOffsetPoints - 2)
{
offset = -wallThickness;
}
WallSectionGenerator.Generate(section, generatedSection, wallSectionSize, true, wallThickness, cullOpening, null, sectionLib, offset);
int[] mapping = submeshLibrary.MapSubmeshes(generatedSection.raw.materials);
Vector3 curveNormal = Vector3.Cross(wallDir, Vector3.up);
Quaternion meshRot = Quaternion.LookRotation(curveNormal, Vector3.up);
Vector3 meshPos = new Vector3(v1.x, volume.baseHeight, v1.z) + wallDir * wallSectionSize.x + Vector3.up * wallSectionSize.y;
meshPos += meshRot * -new Vector3(wallSectionSize.x, wallSectionSize.y, 0) * 0.5f;
mesh.AddData(generatedSection.raw, mapping, meshPos, meshRot, Vector3.one);
}
currentWallSectionIndex++;
if (currentWallSectionIndex >= currentFacadeWallSectionLength)
{
//reached the end of the facade - move to the next one and continue
currentFacadeWallSectionLength = externalWallAnchors[facadeIndex].Count;
currentWallSectionIndex = 0;
}
}
offsetPointBase += wallPointCount - 1;
}
}
//FLOOR
Vector2[] mainShape = offsetRoomAnchorPoints;
Vector2[][] floorCutPoints = floorCuts.ToArray();
int floorVertCount = mainShape.Length;
for (int flc = 0; flc < floorCutPoints.Length; flc++)
{
floorVertCount += floorCutPoints[flc].Length;
}
Vector2[] allFloorPoints = new Vector2[floorVertCount];
int mainShapeLength = mainShape.Length;
for (int ms = 0; ms < mainShapeLength; ms++)
{
allFloorPoints[ms] = mainShape[ms];
}
int cutPointIterator = mainShapeLength;
for (int flc = 0; flc < floorCutPoints.Length; flc++)
{
for (int flcp = 0; flcp < floorCutPoints[flc].Length; flcp++)
{
allFloorPoints[cutPointIterator] = floorCutPoints[flc][flcp];
cutPointIterator++;
}
}
Vector3[] floorPoints = new Vector3[floorVertCount];
Vector2[] floorUvs = new Vector2[floorVertCount];
Vector3[] floorNorms = new Vector3[floorVertCount];
Vector4[] floorTangents = new Vector4[floorVertCount];
for (int rp = 0; rp < floorVertCount; rp++)
{
floorPoints[rp] = new Vector3(allFloorPoints[rp].x, 0, allFloorPoints[rp].y) + floorBaseV;
Vector2 uv = allFloorPoints[rp];
if (floorSurface != null)
{
uv = floorSurface.CalculateUV(uv);
}
floorUvs[rp] = uv;
floorNorms[rp] = Vector3.up;
floorTangents[rp] = tangent;
}
int[] tris = Poly2TriWrapper.Triangulate(mainShape, true, floorCutPoints);
mesh.AddData(floorPoints, floorUvs, tris, floorNorms, floorTangents, floorSubmesh);
if (generateColliders)
{
collider.mesh.AddData(floorPoints, floorUvs, tris, floorNorms, floorTangents, 0);
}
//CEILING!
Vector2[][] ceilingCutPoints = ceilingCuts.ToArray();
int ceilingVertCount = mainShape.Length;
for (int flc = 0; flc < ceilingCutPoints.Length; flc++)
{
ceilingVertCount += ceilingCutPoints[flc].Length;
}
Vector2[] allCeilingPoints = new Vector2[ceilingVertCount];
for (int ms = 0; ms < mainShapeLength; ms++)
{
allCeilingPoints[ms] = mainShape[ms];
}
cutPointIterator = mainShapeLength;
for (int flc = 0; flc < ceilingCutPoints.Length; flc++)
{
for (int flcp = 0; flcp < ceilingCutPoints[flc].Length; flcp++)
{
allCeilingPoints[cutPointIterator] = ceilingCutPoints[flc][flcp];
cutPointIterator++;
}
}
Vector3[] ceilingPoints = new Vector3[ceilingVertCount];
Vector2[] ceilingUvs = new Vector2[ceilingVertCount];
Vector3[] ceilingNorms = new Vector3[ceilingVertCount];
Vector4[] ceilingTangents = new Vector4[ceilingVertCount];
for (int rp = 0; rp < ceilingVertCount; rp++)
{
ceilingPoints[rp] = new Vector3(allCeilingPoints[rp].x, wallUp, allCeilingPoints[rp].y) + floorBaseV;
Vector2 uv = allCeilingPoints[rp];
if (floorSurface != null)
{
uv = ceilingSurface.CalculateUV(uv);
}
ceilingUvs[rp] = uv;
ceilingNorms[rp] = Vector3.down;
ceilingTangents[rp] = tangent;
}
tris = Poly2TriWrapper.Triangulate(mainShape, false, ceilingCutPoints);
mesh.AddData(ceilingPoints, ceilingUvs, tris, ceilingNorms, ceilingTangents, ceilingSubmesh);
if (generateColliders)
{
collider.mesh.AddData(ceilingPoints, ceilingUvs, tris, ceilingNorms, ceilingTangents, 0);
}
for (int ob = 0; ob < openingCount; ob++)
{
VerticalOpening opening = openings[ob];
int openingIndex = Array.IndexOf(openings, opening);
Vector3 basePosition = openingBounds[openingIndex].center;
basePosition.z = basePosition.y;
basePosition.y = volume.baseHeight;
if (roomOpenings.Contains(opening))//opening used in this floorplan
{
int externalWallSubmesh = wallSubmesh != -1 ? wallSubmesh : -1;
switch (opening.usage)
{
case VerticalOpening.Usages.Space:
if (ceilingCutPoints.Length <= ob)
{
continue;
}
Vector3 ceilingCutUpV = Vector3.up * wallThickness;
Vector2[] ceilingCut = ceilingCutPoints[ob];
int custSize = ceilingCut.Length;
for (int cp = 0; cp < custSize; cp++)
{
int indexA = (cp + 1) % custSize;
int indexB = cp;
Vector3 cp0 = new Vector3(ceilingCut[indexA].x, wallUp, ceilingCut[indexA].y) + floorBaseV;
Vector3 cp1 = new Vector3(ceilingCut[indexB].x, wallUp, ceilingCut[indexB].y) + floorBaseV;
Vector3 cp2 = cp0 + ceilingCutUpV;
Vector3 cp3 = cp1 + ceilingCutUpV;
mesh.AddPlane(cp0, cp1, cp2, cp3, ceilingSubmesh);
if (generateColliders)
{
collider.AddPlane(cp0, cp1, cp2, cp3);
}
}
break;
case VerticalOpening.Usages.Stairwell:
StaircaseGenerator.Generate(mesh, opening, basePosition, volume.floorHeight, actualFloor, externalWallSubmesh, sendCollider);
if (volumeFloor == volume.floors - 1 && opening.baseFloor + opening.floors > building.VolumeBaseFloor(volume) + volume.floors - 1 && volume.abovePlanCount == 0)
{
StaircaseGenerator.GenerateRoofAccess(mesh, opening, basePosition, volume.floorHeight, actualFloor, externalWallSubmesh, sendCollider);
}
break;
case VerticalOpening.Usages.Elevator:
ElevatorShaftGenerator.Generate(ref mesh, opening, actualFloor, basePosition, volume.floorHeight, externalWallSubmesh, sendCollider);
break;
}
}
}
}
for (int ob = 0; ob < openingCount; ob++)
{
Vector2[] openingShape = openingShapes[ob];
if (openingShape == null)
{
continue; //opening not used by this floorplan
}
if (openingUsedInThisFloor[ob])
{
continue; //opening already generated
}
//seal this opening from the void
VerticalOpening opening = openings[ob];
int openingIndex = Array.IndexOf(openings, opening);
Vector3 basePosition = openingBounds[openingIndex].center;
basePosition.z = basePosition.y;
basePosition.y = 0;
int cutSize = openingShape.Length;
Vector3 sealingWallUpV = Vector3.up * volume.floorHeight;
int sealWallSubmesh = submeshLibrary.SubmeshAdd(opening.surfaceB);
Vector2[] offsetOpeningShape = QuickPolyOffset.Execute(openingShape, wallThickness);
for (int cp = 0; cp < cutSize; cp++)
{
int indexA = (cp + 1) % cutSize;
int indexB = cp;
Vector2 p0 = opening.usage == VerticalOpening.Usages.Space ? openingShape[indexA] : offsetOpeningShape[indexA];
Vector2 p1 = opening.usage == VerticalOpening.Usages.Space ? openingShape[indexB] : offsetOpeningShape[indexB];
Vector3 cp0 = new Vector3(p0.x, 0, p0.y) + floorBaseV;
Vector3 cp1 = new Vector3(p1.x, 0, p1.y) + floorBaseV;
Vector3 cp2 = cp0 + sealingWallUpV;
Vector3 cp3 = cp1 + sealingWallUpV;
mesh.AddPlane(cp0, cp1, cp2, cp3, sealWallSubmesh);
if (generateColliders)
{
collider.AddPlane(cp0, cp1, cp2, cp3);
}
}
switch (opening.usage)
{
case VerticalOpening.Usages.Space:
//nothing to implement
break;
case VerticalOpening.Usages.Stairwell:
//need stairs to connect used floors
StaircaseGenerator.GenerateStairs(mesh, opening, basePosition, volume.floorHeight, actualFloor, -1, sendCollider);
if (volumeFloor == volume.floors - 1)
{
StaircaseGenerator.GenerateRoofAccess(mesh, opening, basePosition, volume.floorHeight, actualFloor, -1, sendCollider);
}
break;
case VerticalOpening.Usages.Elevator:
//nothing to implement
break;
}
}
}
static void ItemOnGui(string guid, Rect rect)
{
if (settings == null)
{
settings = BuildRSettings.GetSettings();
}
if (!settings.iconPreviews)
{
return;
}
bool defaultFound = settings.defaultIcon != null;
Rect squareRect = new Rect(rect.x, rect.y, rect.height, rect.height);
float defaultHeight = Mathf.Min(56, rect.height);
float defaultWidth = Mathf.Min(44, rect.width, defaultHeight * 0.7857f);
float defaultX = rect.x;
float defaultY = rect.y;
if (rect.height > 56)
{
defaultX = rect.x + (rect.width - 44) * 0.5f;
defaultY = rect.y + (rect.height - 70) * 0.5f;
}
Rect defaultRect = new Rect(defaultX, defaultY, defaultWidth, defaultHeight);
// IconUtil.GUIDIconData iconData = settings.GetCustomIconData(guid);
// if(iconData == null)
// {
// iconData = IconUtil.GenerateGUIDIconData(guid);
// settings.AddCustomIconData(guid, iconData);
// }
string assetPath = AssetDatabase.GUIDToAssetPath(guid);
WallSection wallSection = AssetDatabase.LoadAssetAtPath(assetPath, typeof(WallSection)) as WallSection;
if (wallSection != null)
{
Texture2D wallSectionPreview = wallSection.previewTexture;
if (wallSectionPreview != null)
{
GUI.DrawTexture(squareRect, wallSectionPreview);
}
else if (defaultFound)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
}
Facade facade = AssetDatabase.LoadAssetAtPath(assetPath, typeof(Facade)) as Facade;
if (facade != null)
{
Texture2D facadePreview = facade.previewTexture;
if (facadePreview != null)
{
GUI.DrawTexture(squareRect, facadePreview);
}
else if (defaultFound)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
}
Surface surface = AssetDatabase.LoadAssetAtPath(assetPath, typeof(Surface)) as Surface;
if (surface != null && surface.previewTexture != null)
{
if (surface.previewTexture != null)
{
GUI.DrawTexture(squareRect, surface.previewTexture);
}
else if (defaultFound)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
}
Gable gable = AssetDatabase.LoadAssetAtPath(assetPath, typeof(Gable)) as Gable;
if (defaultFound && gable != null)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
RoomStyle roomStyle = AssetDatabase.LoadAssetAtPath(assetPath, typeof(RoomStyle)) as RoomStyle;
if (defaultFound && roomStyle != null)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
Portal portal = AssetDatabase.LoadAssetAtPath(assetPath, typeof(Portal)) as Portal;
if (defaultFound && portal != null)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
BuildRSettings settingsIcon = AssetDatabase.LoadAssetAtPath(assetPath, typeof(BuildRSettings)) as BuildRSettings;
if (defaultFound && settingsIcon != null)
{
GUI.DrawTexture(defaultRect, settings.defaultIcon);
}
}
