/// <summary>
/// 新增（稀释比例）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnAddDilutionRatio_Click(object sender, EventArgs e)
{
dilutionRatio = null;
dilutionRatio = textEdit2.Text.Trim();
int result;
if (isNumberic(dilutionRatio, out result))
{
}
else
{
MessageBoxDraw.ShowMsg("稀释比例输入格式有误！", MsgType.Exception);
return;
}
if (dilutionRatio != "")
{
dataConfigDic.Clear();
//添加稀释比例
dataConfigDic.Add("DilutionRatioAdd", new object[] { dilutionRatio });
DataConfigLoad(dataConfigDic);
}
else
{
MessageBoxDraw.ShowMsg("请输入稀释比例！", MsgType.Exception);
return;
}
textEdit2.Text = "";
}
/// <summary>
/// 删除校准品点击事件
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnDelete_Click(object sender, EventArgs e)
{
lstCalibProjectInfo = new List <CalibratorProjectinfo>();
if (gridView1.SelectedRowsCount > 0)
{
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
DialogResult result = MessageBoxDraw.ShowMsg("请确认是否删除！", MsgType.YesNo);
if (result == DialogResult.Yes)
{
string calibName = this.gridView1.GetRowCellValue(selectedHandle, "校准品名称").ToString();
for (int i = 0; i < gridView2.RowCount; i++)
{
CalibratorProjectinfo calibProjectInfo = new CalibratorProjectinfo();
calibProjectInfo.ProjectName = this.gridView2.GetRowCellValue(i, "项目名称").ToString();
calibProjectInfo.SampleType = this.gridView2.GetRowCellValue(i, "样本类型").ToString();
calibProjectInfo.CalibName = calibName;
lstCalibProjectInfo.Add(calibProjectInfo);
}
calibMainDictionary.Clear();
calibMainDictionary.Add("DeleteCalibrationMaintain", new object[] { XmlUtility.Serializer(typeof(List <CalibratorProjectinfo>), lstCalibProjectInfo) });
CalibrationMaintainSend(calibMainDictionary);
}
else
{
return;
}
}
}
/// <summary>
/// 修改（结果单位）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnUpdateResultUnit_Clik(object sender, EventArgs e)
{
resultUnit = null;
resultUnit = textEdit1.Text;
if (resultUnitParam != null)
{
if (resultUnit != "")
{
dataConfigDic.Clear();
//修改数据结果单位
dataConfigDic.Add("UpdataDataConfig", new object[] { resultUnit, resultUnitParam });
DataConfigLoad(dataConfigDic);
}
else
{
MessageBoxDraw.ShowMsg("您的输入有误，请重新输入！", MsgType.Exception);
return;
}
}
else
{
MessageBoxDraw.ShowMsg("请选择您要修改的结果单位中的某一列！", MsgType.Exception);
return;
}
textEdit1.Text = "";
}
/// <summary>
/// 删除（结果单位）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnDelete_Click(object sender, EventArgs e)
{
resultUnit = null;
if (this.gridView1.GetSelectedRows().Count() > 0)
{
DialogResult yesorno = MessageBoxDraw.ShowMsg("是否确认删除", MsgType.YesNo);
if (yesorno == DialogResult.No)
{
return;
}
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
resultUnit = this.gridView1.GetRowCellValue(selectedHandle, "结果单位").ToString();
if (resultUnit != null)
{
textEdit1.Text = resultUnit;
dataConfigDic.Clear();
//删除结果单位
dataConfigDic.Add("DeleteDataConfig", new object[] { resultUnit });
DataConfigLoad(dataConfigDic);
textEdit1.Text = "";
}
}
}
/// <summary>
/// 卸载试剂2
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton1_Click(object sender, EventArgs e)
{
if (gridView2.SelectedRowsCount > 0)
{
DialogResult result = MessageBoxDraw.ShowMsg("是否确认卸载试剂！", MsgType.YesNo);
if (result == DialogResult.Yes)
{
}
else
{
return;
}
reagentSettingsInfo = new ReagentSettingsInfo();
int selectedHandle;
selectedHandle = this.gridView2.GetSelectedRows()[0];
reagentSettingsInfo.ProjectName = this.gridView2.GetRowCellValue(selectedHandle, "检测项目").ToString();
reagentSettingsInfo.ReagentName = this.gridView2.GetRowCellValue(selectedHandle, "试剂名称").ToString();
reagentSettingsInfo.ReagentType = this.gridView2.GetRowCellValue(selectedHandle, "试剂类型").ToString();
reagentSettingsInfo.Pos = this.gridView2.GetRowCellValue(selectedHandle, "位置").ToString();
reagentDictionary.Clear();
reagentDictionary.Add("DeleteReagentSettingsR2", new object[] { XmlUtility.Serializer(typeof(ReagentSettingsInfo), reagentSettingsInfo) });
ClientSendToServicer(reagentDictionary);
dt2.Rows.Remove(dt2.Rows[selectedHandle]);
}
}
public void DataTransfer_Event(string strMethod, object sender)
{
switch (strMethod)
{
case "QueryUserInfo":
lstuserInfo = (List <UserInfo>)XmlUtility.Deserialize(typeof(List <UserInfo>), sender as string);
UserInfoAdd(lstuserInfo);
break;
case "AddUserInfo":
QueryUserInfo();
break;
case "EditUserInfo":
QueryUserInfo();
break;
case "DeleteUserInfo":
int count = Convert.ToInt32(sender);
if (count != 0)
{
MessageBoxDraw.ShowMsg("删除失败！请先删除检验医师中的用户名！", MsgType.Exception);
}
QueryUserInfo();
break;
case "QueryUserCeation":
userCeation.AddUserCeation((UserInfo)XmlUtility.Deserialize(typeof(UserInfo), sender as string));
break;
}
}
/// <summary>
/// 删除
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnDelete_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0)
{
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
QualityControlInfo qcInfo = new QualityControlInfo();
qcInfo.QCName = this.gridView1.GetRowCellValue(selectedHandle, "质控品名称").ToString();
qcInfo.Pos = this.gridView1.GetRowCellValue(selectedHandle, "位置").ToString();
qcInfo.LotNum = this.gridView1.GetRowCellValue(selectedHandle, "批号").ToString();
qcInfo.HorizonLevel = this.gridView1.GetRowCellValue(selectedHandle, "水平浓度").ToString();
qcInfo.InvalidDate = System.Convert.ToDateTime(this.gridView1.GetRowCellValue(selectedHandle, "失效日期").ToString());
qcInfo.Manufacturer = this.gridView1.GetRowCellValue(selectedHandle, "生产厂家").ToString();
qcInfo.IsLocked = this.gridView1.GetRowCellValue(selectedHandle, "冻结").ToString() == "是" ? true : false;
qcInfo.QCID = Convert.ToInt32(this.gridView1.GetRowCellValue(selectedHandle, "质控品ID").ToString());
if (qcInfo.IsLocked == false)
{
MessageBoxDraw.ShowMsg("此质控品在激活情况下无法删除，请冻结后尝试删除！", MsgType.Warning);
return;
}
qcMaintainDic.Clear();
qcMaintainDic.Add("DeleteQualityControl", new object[] { XmlUtility.Serializer(typeof(QualityControlInfo), qcInfo) });
SendToServices(qcMaintainDic);
}
}
private void btnDelete_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0)
{
if (MessageBoxDraw.ShowMsg("是否确认删除该防污策略？", MsgType.Question) == DialogResult.OK)
{
CommunicationEntity ReagentNeedle = new CommunicationEntity();
ReagentNeedleAntifoulingStrategyInfo reagentNeedleAntifoulingStrategyInfo = new ReagentNeedleAntifoulingStrategyInfo();
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
reagentNeedleAntifoulingStrategyInfo.ReagentNeedle = this.gridView1.GetRowCellValue(selectedHandle, "试剂针").ToString();
reagentNeedleAntifoulingStrategyInfo.PolluteProName = this.gridView1.GetRowCellValue(selectedHandle, "污染项目名称").ToString();
reagentNeedleAntifoulingStrategyInfo.PolluteProType = this.gridView1.GetRowCellValue(selectedHandle, "污染项目类型").ToString();
reagentNeedleAntifoulingStrategyInfo.BePollutedProName = this.gridView1.GetRowCellValue(selectedHandle, "被污染项目名称").ToString();
reagentNeedleAntifoulingStrategyInfo.BePollutedProType = this.gridView1.GetRowCellValue(selectedHandle, "被污染项目类型").ToString();
reagentNeedleAntifoulingStrategyInfo.CleaningLiquidName = this.gridView1.GetRowCellValue(selectedHandle, "清洗剂类型").ToString();
reagentNeedleAntifoulingStrategyInfo.CleaningLiquidUseVol = (float)Convert.ToDouble(this.gridView1.GetRowCellValue(selectedHandle, "清洗剂体积").ToString());
reagentNeedleAntifoulingStrategyInfo.CleanTimes = Convert.ToInt32(this.gridView1.GetRowCellValue(selectedHandle, "清洗次数").ToString());
reagentNeedleDic.Clear();
reagentNeedleDic.Add("DeleteReagentNeedle", new object[] { XmlUtility.Serializer(typeof(ReagentNeedleAntifoulingStrategyInfo), reagentNeedleAntifoulingStrategyInfo) });
SendReagentNeedle(reagentNeedleDic);
}
}
}
private void simpleButton1_Click(object sender, EventArgs e)
{
if (MessageBoxDraw.ShowMsg("确认要关闭系统吗？", MsgType.Question) == System.Windows.Forms.DialogResult.OK)
{
this.Close();
this.Dispose();
System.Environment.Exit(System.Environment.ExitCode);
}
}
/// <summary>
/// 确定保存按钮
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnConfirm_Click(object sender, EventArgs e)
{
if (txtProShortName.Text.Trim() == "")
{
MessageBoxDraw.ShowMsg("项目名称为必填项，请填写项目名称！", MsgType.Warning);
return;
}
else if (cboSampleType.SelectedIndex < 0)
{
MessageBoxDraw.ShowMsg("请选择项目样本类型！", MsgType.Warning);
return;
}
else
{
AssayProjectInfo assayProInfo = new AssayProjectInfo();
assayProInfo.ProjectName = txtProShortName.Text.Trim();
assayProInfo.SampleType = cboSampleType.SelectedItem.ToString();
if (txtProLongName.Text.Trim() != null)
{
assayProInfo.ProFullName = txtProLongName.Text.Trim();
}
if (txtChannelNumber.Text.Trim() != null)
{
assayProInfo.ChannelNum = txtChannelNumber.Text.Trim();
}
if (this.Text == "新建项目")
{
if (!_LstAssayProjectInfo.Exists(x => x.ProjectName == assayProInfo.ProjectName && x.SampleType == assayProInfo.SampleType))
{
if (DataHandleEvent != null)
{
cheProAddOrEditDic.Clear();
cheProAddOrEditDic.Add("AssayProjectAdd", new object[] { XmlUtility.Serializer(typeof(AssayProjectInfo), assayProInfo) });
DataHandleEvent(cheProAddOrEditDic);
}
}
else
{
MessageBox.Show("该项目已存在，请重新输入！");
txtProShortName.Focus();
}
}
if (this.Text == "编辑项目")
{
if (DataHandleEvent != null)
{
cheProAddOrEditDic.Clear();
cheProAddOrEditDic.Add("AssayProjectEdit", new object[] { XmlUtility.Serializer(typeof(AssayProjectInfo), assayProInfoOld), XmlUtility.Serializer(typeof(AssayProjectInfo), assayProInfo) });
DataHandleEvent(cheProAddOrEditDic);
}
}
}
}
/// <summary>
/// 清除样本
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void ButClearSample_Click(object sender, EventArgs e)
{
if (getOPID != null && !getOPID())
{
MessageBoxDraw.ShowMsg("机器正在运行中，不能清除样本信息！", MsgType.OK);
}
else
{
try
{
int[] rows = this.gridView1.GetSelectedRows();
List <TaskInfo> lstTaskInfo = new List <TaskInfo>();
TaskInfo task;
for (int i = 0; i < rows.Length; i++)
{
string samplelNum = this.gridView1.GetRowCellValue(rows[i], "样本编号").ToString();
if (samplelNum != "" && samplelNum != null)
{
task = new TaskInfo();
task.SampleNum = Convert.ToInt32(samplelNum);
task.CreateDate = Convert.ToDateTime(this.gridView1.GetRowCellValue(rows[i], "样本申请时间"));
lstTaskInfo.Add(task);
}
}
if (lstTaskInfo.Count > 0)
{
string result = new WorkAreaApplyTask().DeleteTaskAndSampleInfo("DeleteTaskAndSampleInfo", lstTaskInfo);
if (result.Substring(0, 1) == "1")
{
result = "选取样本信息清除成功!";
ComSampleNum_SelectedIndexChanged(null, null);
}
else if (result.Substring(0, 1) == "2")
{
result = result.Remove(0, 1) + ":样本信息清除成功！";
ComSampleNum_SelectedIndexChanged(null, null);
}
else
{
result = result.Remove(0, 1);
}
MessageBoxDraw.ShowMsg(result, MsgType.OK);
}
}
catch (FormatException fx)
{
Console.WriteLine(fx.Message);
}
}
}
/// <summary>
/// 申请科室（添加）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSPAdd_Click(object sender, EventArgs e)
{
if (TxtDepartmentName.Text.Trim() != "")
{
dePartManageDic.Clear();
dePartManageDic.Add("AddDepartmentInfo", new object[] { TxtDepartmentName.Text });
DepartmentManageSend(dePartManageDic);
TxtDepartmentName.Text = string.Empty;
}
else
{
MessageBoxDraw.ShowMsg("请输入申请科室名称！", MsgType.OK);
}
}
/// <summary>
/// 申请科室（修改）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSPSave_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0)
{
dePartManageDic.Clear();
dePartManageDic.Add("UpDataDepartment", new object[] { TxtDepartmentName.Text, DataDepartment.ObjLastestParam });
DepartmentManageSend(dePartManageDic);
TxtDepartmentName.Text = string.Empty;
}
else
{
MessageBoxDraw.ShowMsg("没有可修改的科室，无法进行修改！", MsgType.OK);
}
}
/// <summary>
/// 关闭系统
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton1_Click(object sender, EventArgs e)
{
if (MessageBoxDraw.ShowMsg("确认要关闭系统吗？", MsgType.Question) == System.Windows.Forms.DialogResult.OK)
{
ILogin login = new ILogin();
login.SaveUserExitInfo("QueryUserAuthority", UserName);
System.Diagnostics.Process[] ps = Process.GetProcessesByName("BioA.PLCController");
foreach (System.Diagnostics.Process p in ps)
{
p.Kill();
}
this.Dispose();
System.Environment.Exit(System.Environment.ExitCode);
}
}
/// <summary>
/// 审核医生（添加按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton12_Click(object sender, EventArgs e)
{
if (comboBoxEdit2.SelectedIndex >= 0)
{
dePartManageDic.Clear();
dePartManageDic.Add("AddAuditPhysician", new object[] { comboBoxEdit2.Text });
DepartmentManageSend(dePartManageDic);
comboBoxEdit2.SelectedIndex = -1;
comboBoxEdit2.Text = "请选择";
}
else
{
MessageBoxDraw.ShowMsg("请选择待添加的审核医师！", MsgType.OK);
}
}
/// <summary>
/// 试剂1探测余量
/// </summary>
private void ResidueR1()
{
if (this.gridView1.SelectedRowsCount > 0)
{
if (SendNetworkCommandEvent != null)
{
Command cmd = MachineInfo.GetCommandByName("RGTPanel1VolScan");
string pos = "";
for (int i = 0; i < this.gridView1.SelectedRowsCount; i++)
{
int selectedHandle = this.gridView1.GetSelectedRows()[i];
string position = this.gridView1.GetRowCellValue(selectedHandle, "试剂1位置").ToString().Trim();
if (position == "" || position == null)
{
continue;
}
else
{
pos += position + "|";
}
}
if (pos == "")
{
return;
}
cmd.Para = "1:" + pos.TrimEnd('|');
cmd.State = 1;
var ResidueR1Thread = new Thread(() =>
{
//发送命令
SendNetworkCommandEvent(cmd);
});
ResidueR1Thread.IsBackground = true;
ResidueR1Thread.Start();
}
}
else
{
MessageBoxDraw.ShowMsg("请选择待检测余量的项目！", MsgType.Warning);
}
}
/// <summary>
/// 删除审核医生（删除按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton9_Click(object sender, EventArgs e)
{
if (this.gridView4.GetSelectedRows().Count() > 0)
{
DialogResult yesorno = MessageBoxDraw.ShowMsg("是否确认删除", MsgType.YesNo);
if (yesorno == DialogResult.No)
{
return;
}
int selectedHandle;
selectedHandle = this.gridView4.GetSelectedRows()[0];
string str = this.gridView4.GetRowCellValue(selectedHandle, "医生名称").ToString();
dePartManageDic.Clear();
dePartManageDic.Add("DeleteAuditPhysician", new object[] { str });
DepartmentManageSend(dePartManageDic);
}
}
/// <summary>
/// 修改申请医生（保存按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton2_Click(object sender, EventArgs e)
{
if (this.gridView2.GetSelectedRows().Count() > 0)
{
ApplyDoctorInfo applyDoctorInfo = new ApplyDoctorInfo();
applyDoctorInfo.Department = ComBoxDepartment.Text;
applyDoctorInfo.Doctor = TxtDoctorName.Text;
dePartManageDic.Clear();
dePartManageDic.Add("UpdataApplyDoctorInfo", new object[] { XmlUtility.Serializer(typeof(ApplyDoctorInfo), applyDoctorInfo), XmlUtility.Serializer(typeof(ApplyDoctorInfo), applyDoctorInfoOld) });
DepartmentManageSend(dePartManageDic);
TxtDoctorName.Text = "";
}
else
{
MessageBoxDraw.ShowMsg("没有可修改的申请医师，无法进行修改！", MsgType.OK);
}
}
/// <summary>
/// 删除组合项目
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnDelete_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0 && txtCombProjectName.Text.Trim() != null)
{
if (MessageBoxDraw.ShowMsg("是否确认删除组合项目？", MsgType.Question) == DialogResult.OK)
{
CombProjectInfo combProInfo = new CombProjectInfo();
combProInfo.CombProjectName = this.gridView1.GetRowCellValue(this.gridView1.GetSelectedRows()[0], "项目名称").ToString();
List <CombProjectInfo> lstCombProInfos = new List <CombProjectInfo>();
lstCombProInfos.Add(combProInfo);
combProDic.Clear();
combProDic.Add("DeleteCombProjectName", new object[] { XmlUtility.Serializer(typeof(List <CombProjectInfo>), lstCombProInfos) });
AssayProInfoForComb(combProDic);
}
}
}
/// <summary>
/// 试剂保存成功后，触发事件执行的方法
/// </summary>
/// <param name="keyValuePairs"></param>
private void GeTheReagentAfterPreservationEvent(int disk, ReagentSettingsInfo rs)
{
if (disk == 1)
{
lstReagentSettingsInfo.Add(rs);
dt1.Rows.Add(new object[] { rs.ReagentName, rs.ReagentType, rs.Pos, rs.ProjectName
//, reagentSettingsInfo.ResidualQuantity, reagentSettingsInfo.Measuredquantity
, rs.ValidDate.ToString("yyyy-MM-dd"), rs.ReagentContainer, rs.BatchNum });
}
else if (disk == 2)
{
lstReagentSettingsR2Info.Add(rs);
dt2.Rows.Add(new object[] { rs.ReagentName, rs.ReagentType, rs.Pos, rs.ProjectName
//, reagentSettingsInfo.ResidualQuantity, reagentSettingsInfo.Measuredquantity
, rs.ValidDate.ToString("yyyy-MM-dd"), rs.ReagentContainer, rs.BatchNum });
}
MessageBoxDraw.ShowMsgBox("试剂R" + disk + "装载完成！", "试剂装载", MsgType.OK);
}
private void btnDetele_Click(object sender, EventArgs e)
{
//DeleteCalcProject
if (this.gridView1.SelectedRowsCount > 0)
{
if (MessageBoxDraw.ShowMsg("是否确认删除该计算项目？", MsgType.Question) == DialogResult.OK)
{
CalcProjectInfo calcProInfo = new CalcProjectInfo();
calcProInfo.CalcProjectName = this.gridView1.GetRowCellValue(this.gridView1.GetSelectedRows()[0], "项目名称").ToString();
calcProInfo.SampleType = this.gridView1.GetRowCellValue(this.gridView1.GetSelectedRows()[0], "样本类型").ToString();
List <CalcProjectInfo> lstCalcProInfos = new List <CalcProjectInfo>();
lstCalcProInfos.Add(calcProInfo);
calcProDic.Clear();
calcProDic.Add("DeleteCalcProject", new object[] { XmlUtility.Serializer(typeof(List <CalcProjectInfo>), lstCalcProInfos) });
DataSend(calcProDic);
}
}
}
/// <summary>
/// 激活点击事件
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnUnLock_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0)
{
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
QualityControlInfo qcInfo = new QualityControlInfo();
qcInfo.QCName = this.gridView1.GetRowCellValue(selectedHandle, "质控品名称").ToString();
qcInfo.Pos = this.gridView1.GetRowCellValue(selectedHandle, "位置").ToString();
qcInfo.LotNum = this.gridView1.GetRowCellValue(selectedHandle, "批号").ToString();
qcInfo.HorizonLevel = this.gridView1.GetRowCellValue(selectedHandle, "水平浓度").ToString();
qcInfo.InvalidDate = System.Convert.ToDateTime(this.gridView1.GetRowCellValue(selectedHandle, "失效日期").ToString());
qcInfo.Manufacturer = this.gridView1.GetRowCellValue(selectedHandle, "生产厂家").ToString();
qcInfo.IsLocked = this.gridView1.GetRowCellValue(selectedHandle, "冻结").ToString() == "是" ? true : false;
if (qcInfo.IsLocked == false)
{
return;
}
else
{
qcInfo.IsLocked = false;
}
//
foreach (QualityControlInfo qc in lstQualityControlInfo)
{
if (qc.Pos == qcInfo.Pos)
{
if (qc.IsLocked == false)
{
MessageBoxDraw.ShowMsg(string.Format("在{0}位置已存在被激活的质控品，无法激活！", qc.Pos), MsgType.Warning);
return;
}
}
}
qcMaintainDic.Clear();
qcMaintainDic.Add("UnLockQualityControl", new object[] { XmlUtility.Serializer(typeof(QualityControlInfo), qcInfo) });
SendToServices(qcMaintainDic);
}
}
/// <summary>
/// 新增（结果单位）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton1_Click(object sender, EventArgs e)
{
resultUnit = null;
resultUnit = textEdit1.Text.Trim();
if (dilutionRatio != "")
{
dataConfigDic.Clear();
//添加数据结果单位
dataConfigDic.Add("DataConfigAdd", new object[] { resultUnit });
DataConfigLoad(dataConfigDic);
}
else
{
MessageBoxDraw.ShowMsg("请填写结果单位！", MsgType.Warning);
return;
}
textEdit1.Text = "";
}
/// <summary>
/// 修改按钮
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSave_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0 && txtCombProjectName.Text != null)
{
CombProjectInfo combProInfo = new CombProjectInfo();
if (txtCombProjectName.Text.Trim() == "")
{
MessageBoxDraw.ShowMsg("请输入组合项目名称！", MsgType.Warning);
return;
}
combProInfo.CombProjectName = txtCombProjectName.Text.Trim();
List <string> lstProInfos = new List <string>(); // 被选中项目集合
if (combProjectPage1.GetSelectedProjects().Count > 0)
{
lstProInfos.AddRange(combProjectPage1.GetSelectedProjects());
}
if (combprojectPage2.GetSelectedProjects().Count > 0)
{
lstProInfos.AddRange(combprojectPage2.GetSelectedProjects());
}
if (combprojectPage3.GetSelectedProjects().Count > 0)
{
lstProInfos.AddRange(combprojectPage3.GetSelectedProjects());
}
if (combprojectPage4.GetSelectedProjects().Count > 0)
{
lstProInfos.AddRange(combprojectPage4.GetSelectedProjects());
}
combProInfo.ProjectNames = lstProInfos;
combProInfo.CombProjectCount = combProInfo.ProjectNames.Count;
combProInfo.Remarks = txtRemark.Text.Trim();
string combProjectNameOld = this.gridView1.GetRowCellValue(this.gridView1.GetSelectedRows()[0], "项目名称").ToString();
combProDic.Clear();
combProDic.Add("UpdateCombProjectName", new object[] { combProjectNameOld, XmlUtility.Serializer(typeof(CombProjectInfo), combProInfo) });
AssayProInfoForComb(combProDic);
}
}
/// <summary>
/// 删除项目对应的信息
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void SbutDeleteProject_Click(object sender, EventArgs e)
{
MessageBoxButtons messButton = MessageBoxButtons.OKCancel;
DialogResult dr = MessageBox.Show("确定要删除关联的项目吗?", "删除确认", messButton);
if (dr != DialogResult.OK)
{
return;
}
QCRelationProjectInfo qcProjectInfo = new QCRelationProjectInfo();
if (this.gridView1.GetSelectedRows().Count() > 0)
{
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
bool b = this.gridView1.GetRowCellValue(selectedHandle, "冻结").ToString() == "是" ? true : false;
qcProjectInfo.QCID = Convert.ToInt32(this.gridView1.GetRowCellValue(selectedHandle, "质控品ID").ToString());
if (b == false)
{
MessageBoxDraw.ShowMsg("此质控品在激活情况下无法删除，请冻结后尝试删除！", MsgType.Warning);
return;
}
if (this.gridView2.GetSelectedRows().Count() > 0)
{
int selectGridview2Handle;
selectGridview2Handle = this.gridView2.GetSelectedRows()[0];
qcProjectInfo.ProjectName = this.gridView2.GetRowCellValue(selectGridview2Handle, "项目名称").ToString();
}
int count = new QCMaintian().DeleteQCProjectInfo("DeleteQCProjectInfo", qcProjectInfo);
if (count > 0)
{
lstQCRelationProjectInfo.RemoveAll(x => x.QCID == qcProjectInfo.QCID && x.ProjectName == qcProjectInfo.ProjectName);
lstvQCInfo_Click(null, null);
MessageBoxDraw.ShowMsg("删除成功！", MsgType.OK);
}
else
{
MessageBoxDraw.ShowMsg("该项目已下任务,不能删除", MsgType.Warning);
}
}
}
/// <summary>
/// 申请医生（添加按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton4_Click(object sender, EventArgs e)
{
if (TxtDoctorName.Text.Trim() == "")
{
MessageBoxDraw.ShowMsg("请输入申请医师名称！", MsgType.OK);
return;
}
if (ComBoxDepartment.SelectedIndex < 0)
{
MessageBoxDraw.ShowMsg("请选择申请科室！", MsgType.OK);
return;
}
ApplyDoctorInfo applyDoctorInfo = new ApplyDoctorInfo();
applyDoctorInfo.Department = ComBoxDepartment.Text;
applyDoctorInfo.Doctor = TxtDoctorName.Text;
dePartManageDic.Clear();
dePartManageDic.Add("AddApplyDoctorInfo", new object[] { XmlUtility.Serializer(typeof(ApplyDoctorInfo), applyDoctorInfo) });
DepartmentManageSend(dePartManageDic);
}
/// <summary>
/// 审核医生（删除按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void simpleButton1_Click(object sender, EventArgs e)
{
if (gridView2.GetSelectedRows().Count() > 0)
{
DialogResult yesorno = MessageBoxDraw.ShowMsg("是否确认删除", MsgType.YesNo);
if (yesorno == DialogResult.No)
{
return;
}
ApplyDoctorInfo applyDoctorInfo = new ApplyDoctorInfo();
int selectedHandle;
selectedHandle = this.gridView2.GetSelectedRows()[0];
applyDoctorInfo.Doctor = this.gridView2.GetRowCellValue(selectedHandle, "医生名称").ToString();
applyDoctorInfo.Department = this.gridView2.GetRowCellValue(selectedHandle, "申请科室").ToString();
dePartManageDic.Clear();
dePartManageDic.Add("DeleteApplyDoctorInfo", new object[] { XmlUtility.Serializer(typeof(ApplyDoctorInfo), applyDoctorInfo) });
DepartmentManageSend(dePartManageDic);
}
}
/// <summary>
/// 保存打印设置
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSave_Click(object sender, EventArgs e)
{
string parperType = comboPaperType.SelectedItem.ToString();
int cheker = 0;
int aduitor = 0;
if (chkChecker.Checked == true)
{
cheker = 1;
}
if (chkAuditor.Checked == true)
{
aduitor = 1;
}
int row = new BioA.SqlMaps.MyBatis().SavePritSetting(parperType, cheker, aduitor);
if (row > 0)
{
MessageBoxDraw.Show("保存成功！");
}
}
/// <summary>
/// 保存按钮
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSave_Click(object sender, EventArgs e)
{
if (textEdit3.Text != textEdit4.Text)
{
MessageBoxDraw.ShowMsg("两次输入的密码不相同！", MsgType.Exception);
return;
}
if (textEdit1.Text.Trim() == "")
{
MessageBoxDraw.ShowMsg("用户账户输入不能为空，请重新输入！", MsgType.Exception);
return;
}
if (textEdit2.Text.Trim() == "")
{
MessageBoxDraw.ShowMsg("用户名称输入不能为空，请重新输入！", MsgType.Exception);
return;
}
if (textEdit3.Text == "")
{
MessageBoxDraw.ShowMsg("密码输入不能为空，请重新输入！", MsgType.Exception);
return;
}
if (this.Text == "用户创建")
{
if (DataHandleEvent != null)
{
DataHandleEvent("用户创建", Add());
}
}
else
{
if (DataHandleEvent != null)
{
DataHandleEvent("用户编辑", Add());
}
}
this.Close();
}
/// <summary>
/// 申请科室（删除按钮）
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnSPDelete_Click(object sender, EventArgs e)
{
if (this.gridView1.GetSelectedRows().Count() > 0)
{
DialogResult yesorno = MessageBoxDraw.ShowMsg("是否确认删除", MsgType.YesNo);
if (yesorno == DialogResult.No)
{
return;
}
int selectedHandle;
selectedHandle = this.gridView1.GetSelectedRows()[0];
string str1 = this.gridView1.GetRowCellValue(selectedHandle, "科室名称").ToString();
if (str1 != null)
{
TxtDepartmentName.Text = str1;
dePartManageDic.Clear();
dePartManageDic.Add("DeleteDepartment", new object[] { str1 });
DepartmentManageSend(dePartManageDic);
TxtDepartmentName.Text = "";
}
}
}