//************************
private void Initialize_LocalObjects()
//=====================================
{
//....PB 22JAN13. The following "Unit" assignment should be cascaded down automatically from mProject.
//....Project.
mProject = new clsProject(clsUnit.eSystem.English);
//....Operating Conditions.
mOpCond = new clsOpCond();
}
//------------------------
public void Restore_SessionData(ref clsProject Project_In, ref clsOpCond OpCond_In, string FilePath_In)
//======================================================================================================
{
try
{
Split_SessionFile();
Project_In = (clsProject)modMain.gProject.Deserialize(FilePath_In);
OpCond_In = (clsOpCond)modMain.gOpCond.Deserialize(FilePath_In);
Delete_ObjFiles(FilePath_In);
}
catch (Exception pEXP)
{
}
}
private void Initialize_LocalObject()
//===================================
{
//....Operating Condition.
mOpCond = new clsOpCond();
//BG 21DEC12
////....End Config.
//clsEndConfig.eType[] pEndConfig = new clsEndConfig.eType[2];
//for (int i = 0; i < pEndConfig.Length; i++)
// pEndConfig[i] = clsEndConfig.eType.Seal;
//....Project.
//mProject = new clsProject(clsUnit.eSystem.Metric, clsBearing.eType.Radial,
// clsBearing_Radial.eDesign.Flexure_Pivot, pEndConfig, modMain.gDB);
mProject = new clsProject(modMain.gProject.Unit.System);
mProject.Product = new clsProduct(mProject.Unit.System, modMain.gDB);
}
//---------------------------------------------------------------------------
// UTILITY ROUTINES - END '
//---------------------------------------------------------------------------
#endregion
#region "SESSION SAVE/RESTORE RELATED ROUTINES:"
//-----------------------------------------
#region "SAVE SESSION:"
//--------------------
public void Save_SessionData(clsProject Project_In, clsOpCond OpCond_In)
//=================================================================================================
{
try
{
string pFilePath = mFileName_BearingCAD.Remove(mFileName_BearingCAD.Length - 11); // mFileName_BearingCAD;
Boolean pProject =
Project_In.Serialize(pFilePath);
Boolean pOpCond =
OpCond_In.Serialize(pFilePath);
//....Merge two Binary files created for two different objects.
Merge_ObjFiles(pFilePath);
//....Delete two Binary files.
Delete_ObjFiles(pFilePath);
}
catch (Exception pEXP)
{
}
}
private Double Calc_AngStart_Web(clsOpCond OpCond_In)
//===================================================
{
//PB 25JAN12. This routine has a few conflicting/confusing relationship. To be discussed with HK.
//....Ref. Radial_Rev11_27OCT11: Col. IY.
Double pPadCount = mCurrent_Bearing_Radial_FP.Pad.Count;
Double pPivotOffset = mCurrent_Bearing_Radial_FP.Pad.Pivot.Offset;
Double pPadAngle = mCurrent_Bearing_Radial_FP.Pad.Angle();
Double pVal = 0.0F;
if (OpCond_In.Rot_Directionality == clsOpCond.eRotDirectionality.Uni)
{
pVal = 0.5 * (360 / pPadCount) + ((pPivotOffset - 50) / 100) * pPadAngle;
}
else if (OpCond_In.Rot_Directionality == clsOpCond.eRotDirectionality.Bi)
{
pVal = 0.5 * (360 / pPadCount);
}
return(pVal);
}
public Double Ang_Offset(clsOpCond OpCond_In)
//===========================================
{
//PB 25JAN12. This routine has a few conflicting/confusing relationship.
//....Ref. Radial_Rev11_27OCT11: Col. IW
Double pVal = 0.0F;
Double pPadAngle = mCurrent_Bearing_Radial_FP.Pad.Angle();
Double pPivotOffset = 0.0F;
if (OpCond_In.Rot_Directionality == clsOpCond.eRotDirectionality.Uni)
{
pPivotOffset = mCurrent_Bearing_Radial_FP.Pad.Pivot.Offset;
pVal = ((100 - pPivotOffset) / 100) * pPadAngle;
}
else if (OpCond_In.Rot_Directionality == clsOpCond.eRotDirectionality.Bi)
{
pVal = 0.5 * mCurrent_Bearing_Radial_FP.Pad.Angle();
}
return(pVal); //BG 07MAY12
//return modMain.MRound(pVal, 1);
}
//--------------------------------------
public void Read_CustEnqySheet(clsOpCond OpCond_In)
//====================================================
{
PdfReader pPdfDocu = new PdfReader(mFilePath_CustEnqSheet);
AcroFields pPDFField = pPdfDocu.AcroFields;
clsUnit pUnit = new clsUnit();
// Project Related Data
// ---------------------
mCustomer.Name = pPDFField.GetField("Name");
mCustomer.MachineDesc = pPDFField.GetField("Machine Description");
// Operating Condition Related Data
// --------------------------------
//....Load Angle.
Double pLoadAng = 0.0F;
pLoadAng = modMain.ConvTextToDouble(pPDFField.GetField("Load_Angle"));
OpCond_In.Radial_LoadAng = pLoadAng;
//....Speed.
//...Min,Max Val in Eng.
//Double[] pSpeed = new Double[2];
//pSpeed[0] = modMain.ConvTextToDouble(pPDFField.GetField("Op_Speed_Min"));
//pSpeed[1] = modMain.ConvTextToDouble(pPDFField.GetField("Op_Speed_Max"));
//BG 22NOV11
int[] pSpeed = new int[2];
pSpeed[0] = modMain.ConvTextToInt(pPDFField.GetField("Op_Speed_Min"));
pSpeed[1] = modMain.ConvTextToInt(pPDFField.GetField("Op_Speed_Max"));
//...Nominal Val in Eng.
//Double pSpeed_Nom = 0.0F;
//pSpeed_Nom = modMain.ConvTextToDouble(pPDFField.GetField("Op_Speed_Nom"));
//BG 22NOV11
int pSpeed_Nom = 0;
pSpeed_Nom = modMain.ConvTextToInt(pPDFField.GetField("Op_Speed_Nom"));
//....Assign Values.
if (pSpeed[0] != 0.0F && pSpeed[1] != 0.0F)
{
////OpCond_In.Speed_Range[0] = pSpeed[0];
////OpCond_In.Speed_Range[1] = pSpeed[1];
}
else
{
////OpCond_In.Speed_Range[0] = pSpeed_Nom;
////OpCond_In.Speed_Range[1] = pSpeed_Nom;
}
//....Load
//...Min,Max Val in Eng.
Double[] pLoad = new Double[2];
pLoad[0] = modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Min"));
pLoad[1] = modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Max"));
//...Nominal Val in Eng.
Double pLoad_Nom = 0.0F;
pLoad_Nom = modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Nom"));
//...Min,Max Val in Met.
Double[] pLoad_Met = new Double[2];
pLoad_Met[0] = (Double)pUnit.CFac_Load_MetToEng(modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Met_Min")));
pLoad_Met[1] = (Double)pUnit.CFac_Load_MetToEng(modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Met_Max")));
//...Nominal Val in Met.
Double pLoad_Met_Nom = 0.0F;
pLoad_Met_Nom = (Double)pUnit.CFac_Load_MetToEng(modMain.ConvTextToDouble(pPDFField.GetField("Op_Load_Met_Nom")));
//....Assign Values.
if (pLoad[0] != 0.0F && pLoad[1] != 0.0F)
//---------------------------------------
{
////OpCond_In.Radial_Load_Range[0] = pLoad[0];
////OpCond_In.Radial_Load_Range[1] = pLoad[1];
}
else if (pLoad_Nom != 0.0F)
//-------------------------
{
////OpCond_In.Radial_Load_Range[0] = pLoad_Nom;
////OpCond_In.Radial_Load_Range[1] = pLoad_Nom;
}
else if (pLoad_Met[0] != 0.0F && pLoad_Met[1] != 0.0F)
//----------------------------------------------------
{
////OpCond_In.Radial_Load_Range[0] = pLoad_Met[0];
////OpCond_In.Radial_Load_Range[1] = pLoad_Met[1];
}
else if (pLoad_Met_Nom != 0.0F)
//-----------------------------
{
////OpCond_In.Radial_Load_Range[0] = pLoad_Met_Nom;
////OpCond_In.Radial_Load_Range[1] = pLoad_Met_Nom;
}
//....Pressure
//....Val in Eng.
Double pPress = 0.0F;
pPress = modMain.ConvTextToDouble(pPDFField.GetField("Pressure"));
//....Val in Met.
Double pPress_Met = 0.0F;
pPress_Met = (Double)pUnit.CFac_Press_MetToEng(modMain.ConvTextToDouble(pPDFField.GetField("Pressure_Met")));
////if (pPress != 0.0F)
//// OpCond_In.OilSupply_Press = pPress;
////else if (pPress_Met != 0.0F)
//// OpCond_In.OilSupply_Press = pPress_Met;
//....Tempurature
//....Val in Eng.
Double pTemp = 0.0F;
pTemp = modMain.ConvTextToDouble(pPDFField.GetField("Temperature"));
//....Val in Met.
Double pTemp_Met = 0.0F;
pTemp_Met = (Double)pUnit.CFac_Temp_MetToEng(modMain.ConvTextToDouble(pPDFField.GetField("Temperature_Met")));
////if (pPress != 0.0F)
//// OpCond_In.OilSupply_Temp = pTemp;
////else if (pPress_Met != 0.0F)
//// OpCond_In.OilSupply_Temp = pTemp_Met;
//////.....Lube Type
////OpCond_In.OilSupply_Lube_Type = pPDFField.GetField("Type");
//////.....OilSupply Type
////string pOilType = pPDFField.GetField("OilSupply_Type");
////if (pOilType == "Pressurized")
//// OpCond_In.OilSupply_Type = "Pressurized";
////else if (pOilType != "" && pOilType != null)
////{
//// MessageBox.Show("Please change oilsupply type, this is not supported in this version");
//// OpCond_In.OilSupply_Type = "Pressurized";
////}
////else
//// OpCond_In.OilSupply_Type = "Pressurized";
//....Directionality
String pRot_Directionality = pPDFField.GetField("Directionality");
if (pRot_Directionality == "Uni")
{
OpCond_In.Rot_Directionality = (clsOpCond.eRotDirectionality)Enum.Parse(typeof(clsOpCond.eRotDirectionality), "Uni");
}
else if (pRot_Directionality == "Bi")
{
OpCond_In.Rot_Directionality = (clsOpCond.eRotDirectionality)Enum.Parse(typeof(clsOpCond.eRotDirectionality), "Bi");
}
else if (pRot_Directionality == "" && pRot_Directionality == null)
{
OpCond_In.Rot_Directionality = (clsOpCond.eRotDirectionality)Enum.Parse(typeof(clsOpCond.eRotDirectionality), "Bi");
}
// Bearing Related Data.
// ---------------------
//....Type
String pBearingType = pPDFField.GetField("BearingType").Trim();
//mRadialType = (eRadialType)Enum.Parse(typeof(eRadialType), pBearingType);
if (pBearingType != null)
{
if (pBearingType != clsBearing_Radial.eDesign.Flexure_Pivot.ToString().Replace("_", " ").Trim())
{
System.Windows.Forms.MessageBox.Show("This type not supported in this version");
}
else if (pBearingType == clsBearing_Radial.eDesign.Flexure_Pivot.ToString().Replace("_", " "))
{
pBearingType = pBearingType.Replace(" ", "_").Trim();
((clsBearing_Radial_FP)mProduct.Bearing).Design = (clsBearing_Radial_FP.eDesign)Enum.Parse(typeof(clsBearing_Radial_FP.eDesign), pBearingType);
}
}
//Bearing_In.TypeRadial = "Flexure Pivot";
//....Split Config
String pSplitConfig = pPDFField.GetField("SplitConfig");
//if (pSplitConfig == "Yes")
// Bearing_In.SplitConfig = true;
//else if (pSplitConfig == "No")
// Bearing_In.SplitConfig = false;
//else if (pSplitConfig == "" && pSplitConfig == null)
// Bearing_In.SplitConfig = true;
if (pSplitConfig == "Yes")
{
((clsBearing_Radial_FP)mProduct.Bearing).SplitConfig = true;
}
else if (pSplitConfig == "No")
{
((clsBearing_Radial_FP)mProduct.Bearing).SplitConfig = false;
}
else if (pSplitConfig == "" || pSplitConfig == null)
{
((clsBearing_Radial_FP)mProduct.Bearing).SplitConfig = true;
}
pPdfDocu.Close();
}
private void SetLocalObject()
//===========================
{
mOpCond = (clsOpCond)modMain.gOpCond.Clone();
}
