public void RemoveAttachedParts(HashSet <PartSim> partSims)
{
// Loop through the attached parts
for (int i = 0; i < this.attachNodes.Count; i++)
{
AttachNodeSim attachSim = this.attachNodes[i];
// If the part is in the set then "remove" it by clearing the PartSim reference
if (partSims.Contains(attachSim.attachedPartSim))
{
attachSim.attachedPartSim = null;
}
}
// Loop through the fuel targets (fuel line sources)
for (int i = 0; i < this.fuelTargets.Count; i++)
{
PartSim fuelTargetSim = this.fuelTargets[i];
// If the part is in the set then "remove" it by clearing the PartSim reference
if (fuelTargetSim != null && partSims.Contains(fuelTargetSim))
{
this.fuelTargets[i] = null;
}
}
// Loop through the surface attached fuel targets (surface attached parts for new flow modes)
for (int i = 0; i < this.surfaceMountFuelTargets.Count; i++)
{
PartSim fuelTargetSim = this.surfaceMountFuelTargets[i];
// If the part is in the set then "remove" it by clearing the PartSim reference
if (fuelTargetSim != null && partSims.Contains(fuelTargetSim))
{
this.surfaceMountFuelTargets[i] = null;
}
}
}
public static AttachNodeSim New(PartSim partSim, String newId, AttachNode.NodeType newNodeType)
{
AttachNodeSim nodeSim = pool.Borrow();
nodeSim.attachedPartSim = partSim;
nodeSim.nodeType = newNodeType;
nodeSim.id = newId;
return(nodeSim);
}
static private void Reset(AttachNodeSim attachNodeSim)
{
attachNodeSim.attachedPartSim = null;
}
public void SetupAttachNodes(Dictionary <Part, PartSim> partSimLookup, LogMsg log)
{
if (log != null)
{
log.AppendLine("SetupAttachNodes for ", name, ":", partId);
}
attachNodes.Clear();
for (int i = 0; i < part.attachNodes.Count; ++i)
{
AttachNode attachNode = part.attachNodes[i];
if (log != null)
{
log.AppendLine("AttachNode ", attachNode.id, " = ", (attachNode.attachedPart != null ? attachNode.attachedPart.partInfo.name : "null"));
}
if (attachNode.attachedPart != null && attachNode.id != "Strut")
{
PartSim attachedSim;
if (partSimLookup.TryGetValue(attachNode.attachedPart, out attachedSim))
{
if (log != null)
{
log.AppendLine("Adding attached node ", attachedSim.name, ":", attachedSim.partId);
}
attachNodes.Add(AttachNodeSim.New(attachedSim, attachNode.id, attachNode.nodeType));
}
else
{
if (log != null)
{
log.AppendLine("No PartSim for attached part (", attachNode.attachedPart.partInfo.name, ")");
}
}
}
}
for (int i = 0; i < part.fuelLookupTargets.Count; ++i)
{
Part p = part.fuelLookupTargets[i];
if (p != null)
{
PartSim targetSim;
if (partSimLookup.TryGetValue(p, out targetSim))
{
if (log != null)
{
log.AppendLine("Fuel target: ", targetSim.name, ":", targetSim.partId);
}
fuelTargets.Add(targetSim);
}
else
{
if (log != null)
{
log.AppendLine("No PartSim for fuel target (", p.name, ")");
}
}
}
}
}
public void GetSourceSet_Internal(int type, bool includeSurfaceMountedParts, List <PartSim> allParts, HashSet <PartSim> visited, HashSet <PartSim> allSources, bool checkMax, ref int priMax, LogMsg log, String indent)
{
if (log != null)
{
log.Append(indent, "GetSourceSet_Internal(", ResourceContainer.GetResourceName(type), ") for ")
.AppendLine(name, ":", partId);
indent += " ";
}
// Rule 1: Each part can be only visited once, If it is visited for second time in particular search it returns as is.
if (visited.Contains(this))
{
if (log != null)
{
log.Append(indent, "Nothing added, already visited (", name, ":")
.AppendLine(partId + ")");
}
return;
}
if (log != null)
{
log.AppendLine(indent, "Adding this to visited");
}
visited.Add(this);
// Rule 2: Part performs scan on start of every fuel pipe ending in it. This scan is done in order in which pipes were installed.
// Then it makes an union of fuel tank sets each pipe scan returned. If the resulting list is not empty, it is returned as result.
//MonoBehaviour.print("for each fuel line");
int lastCount = allSources.Count;
for (int i = 0; i < this.fuelTargets.Count; i++)
{
PartSim partSim = this.fuelTargets[i];
if (partSim != null)
{
if (visited.Contains(partSim))
{
if (log != null)
{
log.Append(indent, "Fuel target already visited, skipping (", partSim.name, ":")
.AppendLine(partSim.partId, ")");
}
}
else
{
if (log != null)
{
log.Append(indent, "Adding fuel target as source (", partSim.name, ":")
.AppendLine(partSim.partId, ")");
}
partSim.GetSourceSet_Internal(type, includeSurfaceMountedParts, allParts, visited, allSources, checkMax, ref priMax, log, indent);
}
}
}
if (fuelCrossFeed)
{
if (includeSurfaceMountedParts)
{
// check surface mounted fuel targets
for (int i = 0; i < surfaceMountFuelTargets.Count; i++)
{
PartSim partSim = this.surfaceMountFuelTargets[i];
if (partSim != null)
{
if (visited.Contains(partSim))
{
if (log != null)
{
log.Append(indent, "Surface part already visited, skipping (", partSim.name, ":")
.AppendLine(partSim.partId, ")");
}
}
else
{
if (log != null)
{
log.Append(indent, "Adding surface part as source (", partSim.name, ":")
.AppendLine(partSim.partId, ")");
}
partSim.GetSourceSet_Internal(type, includeSurfaceMountedParts, allParts, visited, allSources, checkMax, ref priMax, log, indent);
}
}
}
}
lastCount = allSources.Count;
//MonoBehaviour.print("for each attach node");
for (int i = 0; i < this.attachNodes.Count; i++)
{
AttachNodeSim attachSim = this.attachNodes[i];
if (attachSim.attachedPartSim != null)
{
if (attachSim.nodeType == AttachNode.NodeType.Stack)
{
if ((string.IsNullOrEmpty(noCrossFeedNodeKey) == false && attachSim.id.Contains(noCrossFeedNodeKey)) == false)
{
if (visited.Contains(attachSim.attachedPartSim))
{
if (log != null)
{
log.Append(indent, "Attached part already visited, skipping (", attachSim.attachedPartSim.name, ":")
.AppendLine(attachSim.attachedPartSim.partId, ")");
}
}
else
{
bool flg = true;
if (attachSim.attachedPartSim.isEnginePlate) //y u make me do dis.
{
foreach (AttachNodeSim att in attachSim.attachedPartSim.attachNodes)
{
if (att.attachedPartSim == this && att.id == "bottom")
{
flg = false;
}
}
}
if (flg)
{
if (log != null)
{
log.Append(indent, "Adding attached part as source (", attachSim.attachedPartSim.name, ":")
.AppendLine(attachSim.attachedPartSim.partId, ")");
}
attachSim.attachedPartSim.GetSourceSet_Internal(type, includeSurfaceMountedParts, allParts, visited, allSources, checkMax, ref priMax, log, indent);
}
}
}
}
}
}
}
// If the part is fuel container for searched type of fuel (i.e. it has capability to contain that type of fuel and the fuel
// type was not disabled) and it contains fuel, it adds itself.
if (checkMax ? (maxResources.HasType(type)) : (resources.HasType(type) && resourceFlowStates[type] > 0.0))
{
if (checkMax ? (maxResources[type] > SimManager.RESOURCE_MIN) : (resources[type] > resRequestRemainingThreshold))
{
// Get the priority of this tank
int pri = GetResourcePriority();
if (pri > priMax)
{
// This tank is higher priority than the previously added ones so we clear the sources
// and set the priMax to this priority
allSources.Clear();
priMax = pri;
}
// If this is the correct priority then add this to the sources
if (pri == priMax)
{
if (log != null)
{
log.Append(indent, "Adding enabled tank as source (", name, ":")
.AppendLine(partId, ")");
}
allSources.Add(this);
}
}
}
else
{
if (log != null)
{
log.Append(indent, "Not fuel tank or disabled. HasType = ", resources.HasType(type))
.AppendLine(" FlowState = " + resourceFlowStates[type]);
}
}
}