/// <summary>
/// The implementation of the command.
/// </summary>
/// <param name="commandData"></param>
/// <param name="message"></param>
/// <param name="elements"></param>
/// <returns></returns>
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
UIDocument uiDoc = commandData.Application.ActiveUIDocument;
Document doc = uiDoc.Document;
View activeView = commandData.View;
GroupHelper groupHelper = new GroupHelper();
Group selectedModelGroup;
if (!groupHelper.getSelectedModelGroup(uiDoc, out selectedModelGroup, out message))
{
return(Result.Cancelled);
}
groupHelper.HideAllAttachedDetailGroups(selectedModelGroup, doc, activeView);
return(Result.Succeeded);
}
public override Result Execute(ExternalCommandData data, ref string message, DB.ElementSet elements)
{
// Check to see if any document path is provided in journal data
// if yes, open the document.
if (data.JournalData.TryGetValue("Open", out var filename))
{
if (!GH.Guest.OpenDocument(filename))
{
return(Result.Failed);
}
}
GH.Guest.ShowEditorAsync();
return(Result.Succeeded);
}
/// <summary>
/// The implementation of the command.
/// </summary>
/// <param name="commandData"></param>
/// <param name="message"></param>
/// <param name="elements"></param>
/// <returns></returns>
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
View activeView = commandData.View;
if (activeView is ViewSchedule)
{
ScheduleHTMLExporter exporter = new ScheduleHTMLExporter(activeView as ViewSchedule);
Autodesk.Revit.ApplicationServices.Application revitApplication = commandData.Application.Application;
bool bInteractive = revitApplication.IsJournalPlaying() ? false : true;
return(exporter.ExportToHTML(bInteractive, ref message) ? Result.Succeeded : Result.Cancelled);
}
message = "Unable to proceed: Active view must be a schedule.";
return(Result.Cancelled);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
try
{
CreationMgr mgr = new CreationMgr(commandData.Application.ActiveUIDocument);
mgr.Execute();
}
catch (Exception e)
{
message += e.StackTrace;
return(Autodesk.Revit.UI.Result.Cancelled);
}
return(Autodesk.Revit.UI.Result.Succeeded);
}
/// <summary>
/// Overload this method to implement the external command within Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
ElementSet selections = new ElementSet();
foreach (ElementId elementId in commandData.Application.ActiveUIDocument.Selection.GetElementIds())
{
selections.Insert(commandData.Application.ActiveUIDocument.Document.GetElement(elementId));
}
ElementSet dimsToDelete = new Autodesk.Revit.DB.ElementSet();
//warning if nothing selected
if (0 == selections.Size)
{
message = "Please select dimensions";
return(Autodesk.Revit.UI.Result.Failed);
}
//find all unpinned dimensions in the current selection
foreach (Element e in selections)
{
Dimension dimesionTemp = e as Dimension;
if (null != dimesionTemp && !dimesionTemp.Pinned)
{
dimsToDelete.Insert(dimesionTemp);
}
}
//warning if could not find any unpinned dimension
if (0 == dimsToDelete.Size)
{
message = "There are no unpinned dimensions currently selected";
return(Autodesk.Revit.UI.Result.Failed);
}
Transaction transaction = new Transaction(commandData.Application.ActiveUIDocument.Document, "External Tool");
transaction.Start();
//delete all the unpinned dimensions
foreach (Element e in dimsToDelete)
{
commandData.Application.ActiveUIDocument.Document.Delete(e.Id);
}
transaction.Commit();
return(Autodesk.Revit.UI.Result.Succeeded);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData
, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Autodesk.Revit.DB.Document doc = commandData.Application.ActiveUIDocument.Document;
// get one sheet view to place panel schedule.
ViewSheet sheet = doc.ActiveView as ViewSheet;
if (null == sheet)
{
message = "please go to a sheet view.";
return(Result.Failed);
}
// get all PanelScheduleView instances in the Revit document.
FilteredElementCollector fec = new FilteredElementCollector(doc);
ElementClassFilter PanelScheduleViewsAreWanted = new ElementClassFilter(typeof(PanelScheduleView));
fec.WherePasses(PanelScheduleViewsAreWanted);
List <Element> psViews = fec.ToElements() as List <Element>;
Transaction placePanelScheduleOnSheet = new Transaction(doc, "placePanelScheduleOnSheet");
placePanelScheduleOnSheet.Start();
XYZ nextOrigin = new XYZ(0.0, 0.0, 0.0);
foreach (Element element in psViews)
{
PanelScheduleView psView = element as PanelScheduleView;
if (psView.IsPanelScheduleTemplate())
{
// ignore the PanelScheduleView instance which is a template.
continue;
}
PanelScheduleSheetInstance onSheet = PanelScheduleSheetInstance.Create(doc, psView.Id, sheet);
onSheet.Origin = nextOrigin;
BoundingBoxXYZ bbox = onSheet.get_BoundingBox(doc.ActiveView);
double width = bbox.Max.X - bbox.Min.X;
nextOrigin = new XYZ(onSheet.Origin.X + width, onSheet.Origin.Y, onSheet.Origin.Z);
}
placePanelScheduleOnSheet.Commit();
return(Result.Succeeded);
}
public override Result Execute(ExternalCommandData data, ref string message, DB.ElementSet elements)
{
var doc = data.Application.ActiveUIDocument.Document;
if (!doc.IsFamilyDocument && !DB.DirectShape.IsSupportedDocument(doc))
{
message = "Active document dont't support DirectShape functionality.";
return(Result.Failed);
}
using
(
var openFileDialog = new OpenFileDialog()
{
Filter = "Rhino 3D models (*.3dm)|*.3dm",
FilterIndex = 1,
RestoreDirectory = true
}
)
{
switch (openFileDialog.ShowDialog(Revit.MainWindowHandle))
{
case DialogResult.OK:
if (doc.IsFamilyDocument)
{
return(Import3DMFileToFamily
(
doc,
openFileDialog.FileName
));
}
else
{
return(Import3DMFileToProject
(
doc,
openFileDialog.FileName,
CommandGrasshopperBake.ActiveBuiltInCategory
));
}
case DialogResult.Cancel: return(Result.Cancelled);
}
}
return(Result.Failed);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public virtual Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData
, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Transaction trans = new Transaction(commandData.Application.ActiveUIDocument.Document, "Revit.SDK.Samples.VisibilityControl");
trans.Start();
try
{
if (null == commandData)
{
trans.RollBack();
throw new ArgumentNullException("commandData");
}
// create an instance of VisibilityCtrl
VisibilityCtrl visiController = new VisibilityCtrl(commandData.Application.ActiveUIDocument);
// create a user interface form
using (VisibilityCtrlForm dlg = new VisibilityCtrlForm(visiController))
{
// show dialog
System.Windows.Forms.DialogResult result = dlg.ShowDialog();
if (result == System.Windows.Forms.DialogResult.OK)
{
trans.Commit();
return(Autodesk.Revit.UI.Result.Succeeded);
}
else if (result == System.Windows.Forms.DialogResult.Yes)
{
// isolate the selected element(s)
visiController.Isolate();
trans.Commit();
return(Autodesk.Revit.UI.Result.Succeeded);
}
}
trans.RollBack();
return(Autodesk.Revit.UI.Result.Cancelled);
}
catch (Exception ex)
{
message = ex.Message;
trans.RollBack();
return(Autodesk.Revit.UI.Result.Failed);
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
// NOTES: Anything can be done in this method, such as the solid-solid cut operation.
// Get the application and document from external command data.
Application app = commandData.Application.Application;
Document activeDoc = commandData.Application.ActiveUIDocument.Document;
#region Demo how to use the SolidSolidCut API to make one solid cut another.
int solidToBeCutElementId = 30481; //The cube
int cuttingSolidElementId = 30809; //The sphere
//Get element by ElementId
Element solidToBeCut = activeDoc.GetElement(new ElementId(solidToBeCutElementId));
Element cuttingSolid = activeDoc.GetElement(new ElementId(cuttingSolidElementId));
//If the two elements do not exist, notify user to open the family file then try this command.
if (solidToBeCut == null || cuttingSolid == null)
{
TaskDialog.Show("Notice", "Please open the family file SolidSolidCut.rfa, then try to run this command.");
return(Autodesk.Revit.UI.Result.Succeeded);
}
//Check whether the cuttingSolid can cut the solidToBeCut
CutFailureReason cutFailureReason = new CutFailureReason();
if (SolidSolidCutUtils.CanElementCutElement(cuttingSolid, solidToBeCut, out cutFailureReason))
{
//cuttingSolid can cut solidToBeCut
//Do the solid-solid cut operation
//Start a transaction
Transaction transaction = new Transaction(activeDoc);
transaction.Start("AddCutBetweenSolids(activeDoc, solidToBeCut, cuttingSolid)");
//Let the cuttingSolid cut the solidToBeCut
SolidSolidCutUtils.AddCutBetweenSolids(activeDoc, solidToBeCut, cuttingSolid);
transaction.Commit();
}
#endregion
return(Autodesk.Revit.UI.Result.Succeeded);
}
/// <summary>
/// The implementation of the command.
/// </summary>
/// <param name="commandData"></param>
/// <param name="message"></param>
/// <param name="elements"></param>
/// <returns></returns>
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Document doc = commandData.Application.ActiveUIDocument.Document;
View activeView = commandData.View;
if (activeView is ViewSchedule)
{
ScheduleHTMLExporter exporter = new ScheduleHTMLExporter(activeView as ViewSchedule);
exporter.ExportToHTML();
}
else
{
TaskDialog.Show("Unable to proceed", "Active view must be a schedule.");
return(Result.Cancelled);
}
return(Result.Succeeded);
}
ElementSet(string label, ICollection <Autodesk.Revit.DB.ElementId> val, Document doc)
: base(label)
{
MVal = new Autodesk.Revit.DB.ElementSet();
foreach (var elemId in val)
{
if (Autodesk.Revit.DB.ElementId.InvalidElementId == elemId)
{
continue;
}
var elem = doc.GetElement(elemId);
if (null != elem)
{
MVal.Insert(elem);
}
}
}
// TBD: as of 04/10/07 - only works on App startup, not dynamically from another command (jma)
/*public void
* AddMenu()
* {
* MenuItem rootMenu = m_revitApp.CreateTopMenu("RevitLookup Test Menu Item");
*
* bool success = rootMenu.AddToExternalTools();
* if (success) {
* MenuItem subItem = rootMenu.Append(MenuItem.MenuType.BasicMenu, "Pick me to call back into RevitLookup", "RevitLookup.dll", "CmdSampleMenuItemCallback");
* System.Windows.Forms.MessageBox.Show("Successfully added new menu to the External Tools menu. Pick the item to demonstrate callback.");
* }
* else
* System.Windows.Forms.MessageBox.Show("Could not add new menu!");
* }
*
* public void
* AddToolbar()
* {
* Toolbar toolBar = m_revitApp.CreateToolbar();
* toolBar.Name = "Jimbo";
*
* if (toolBar != null) {
* ToolbarItem tbItem = toolBar.AddItem("RevitLookup.dll", "CmdSampleMenuItemCallback");
* System.Windows.Forms.MessageBox.Show("Successfully added new toolbar. Pick the item to demonstrate callback.");
* }
* else
* System.Windows.Forms.MessageBox.Show("Could not add new toolbar!");
* }*/
public void SelectElement()
{
Autodesk.Revit.UI.Selection.Selection selSet = m_revitApp.ActiveUIDocument.Selection;
try
{
Autodesk.Revit.DB.Element elem = m_revitApp.ActiveUIDocument.Document.GetElement(selSet.PickObject(Autodesk.Revit.UI.Selection.ObjectType.Element).ElementId);
Autodesk.Revit.DB.ElementSet elemSet = m_revitApp.Application.Create.NewElementSet();
elemSet.Insert(elem);
Snoop.Forms.Objects form = new Snoop.Forms.Objects(elemSet);
form.ShowDialog();
}
catch (System.Exception)
{
System.Windows.Forms.MessageBox.Show("Didn't pick one!");
}
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(Autodesk.Revit.UI.ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Transaction newTran = null;
try
{
if (null == commandData)
{
throw new ArgumentNullException("commandData");
}
Document doc = commandData.Application.ActiveUIDocument.Document;
ViewsMgr view = new ViewsMgr(doc);
newTran = new Transaction(doc);
newTran.Start("AllViews_Sample");
AllViewsForm dlg = new AllViewsForm(view);
if (dlg.ShowDialog() == DialogResult.OK)
{
view.GenerateSheets(doc);
}
newTran.Commit();
return(Autodesk.Revit.UI.Result.Succeeded);
}
catch (Exception e)
{
// message = e.Message;
if (e.Message == "viewId cannot be added to the ViewSheet." + Environment.NewLine + "Parameter name: viewId")
{
TaskDialog.Show("Error", "Cannot reuse the same view");
}
else
{
message = e.Message;
}
if ((newTran != null) && newTran.HasStarted() && !newTran.HasEnded())
{
newTran.RollBack();
}
return(Autodesk.Revit.UI.Result.Failed);
}
}
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
try
{
m_doc = commandData.Application.ActiveUIDocument.Document;
if (IsValidView())
{
AppCommand.thisApp.ShowWalker(commandData.Application);
}
return Result.Succeeded;
}
catch (Exception ex)
{
message = ex.Message;
return Result.Failed;
}
}
public override Result Execute(ExternalCommandData data, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
if
(
(Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl)) &&
(Keyboard.IsKeyDown(Key.LeftShift) || Keyboard.IsKeyDown(Key.RightShift))
)
{
return(ShowLoadError(data));
}
if (Addin.CurrentStatus == Addin.Status.Ready)
{
if (Keyboard.IsKeyDown(Key.LeftCtrl) || Keyboard.IsKeyDown(Key.RightCtrl))
{
return(Rhinoceros.RunCommandAbout());
}
if
(
Rhinoceros.MainWindow.Visible ||
Rhinoceros.MainWindow.ActivePopup?.IsInvalid == false
)
{
Rhinoceros.MainWindow.BringToFront();
return(Result.Succeeded);
}
return(Result.Succeeded);
}
if (AddinOptions.Current.CompactTab)
{
data.Application.CreateRibbonTab(Addin.AddinName);
data.Application.ActivateRibbonTab(Addin.AddinName);
}
var result = Start(new RibbonHandler(data.Application));
if (result == Result.Failed)
{
ShowLoadError(data);
}
return(result);
}
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
m_app = commandData.Application;
m_doc = m_app.ActiveUIDocument.Document;
if (AddSharedParameters() == false)
{
MessageBox.Show("LEED Parameters cannot be found.\n" + LEEDParameters.LEED_AreaWithViews.ToString() + "\n" + LEEDParameters.LEED_NonRegularyOccupied.ToString(), "LEED View Analysis - Shared Parameters", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
if (IsViewForAnalysis(m_doc.ActiveView))
{
//two modes: fast run for simple geometry, slow run for complex geometry
UIDocument uidoc = m_app.ActiveUIDocument;
IList <Reference> selectedElements = uidoc.Selection.PickObjects(ObjectType.Element, new RoomElementFilter(), "Select rooms to calculate the area with views. Click Finish on the options bar when you're done selecting rooms.");
if (selectedElements.Count > 0)
{
List <Room> selectedRooms = new List <Room>();
//ray tracing is only available in 3d views
foreach (Reference reference in selectedElements)
{
Room room = m_doc.GetElement(reference.ElementId) as Room;
if (null != room)
{
selectedRooms.Add(room);
}
}
if (selectedRooms.Count > 0)
{
MainWindow mainWindow = new MainWindow(m_app, selectedRooms);
if (mainWindow.ShowDialog() == true)
{
MessageBox.Show("View analysis has been successfully run.", "LEED EQc 8.2", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
}
}
}
else
{
MessageBox.Show("A floor plan should be an active view for the view anlaysis.\n", "View Analysis - Active View", MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
return(Result.Succeeded);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
try
{
m_project = commandData.Application.ActiveUIDocument;
// Get the selected element and store it to data member.
if (!GetSelectedElement())
{
message = m_errorInformation;
return(Autodesk.Revit.UI.Result.Failed);
}
// Create a BoundingBoxXYZ instance which used in NewViewSection() method
if (!GenerateBoundingBoxXYZ())
{
message = m_errorInformation;
return(Autodesk.Revit.UI.Result.Failed);
}
// Create a section view.
Transaction transaction = new Transaction(m_project.Document, "CreateSectionView");
transaction.Start();
ViewSection section = m_project.Document.Create.NewViewSection(m_box);
if (null == section)
{
message = "Can't create the ViewSection.";
return(Autodesk.Revit.UI.Result.Failed);
}
// Modify some parameters to make it look better.
section.get_Parameter(BuiltInParameter.VIEW_DETAIL_LEVEL).Set(2);
transaction.Commit();
// If everything goes right, give successful information and return succeeded.
MessageBox.Show("Create view section succeeded.", "Revit");
return(Autodesk.Revit.UI.Result.Succeeded);
}
catch (Exception e)
{
message = e.Message;
return(Autodesk.Revit.UI.Result.Failed);
}
}
//private void btnCancel_Click(object sender, EventArgs e)
//{
// //this.Close();
//}
#region convertTextNotesToUpperByView
private void convertTextNotesToUpperByView()
{
// Iterate through the document and find all the TextNote elements
FilteredElementCollector collector = new FilteredElementCollector(document, document.ActiveView.Id);
collector.OfClass(typeof(TextNote));
if (collector.GetElementCount() == 0)
{
return;
}
// Record all TextNotes that are not yet formatted to be 'AllCaps'
ElementSet textNotesToUpdate = new Autodesk.Revit.DB.ElementSet();
foreach (Element element in collector)
{
TextNote textNote = (TextNote)element;
// Extract the FormattedText from the TextNote
FormattedText formattedText = textNote.GetFormattedText();
if (formattedText.GetAllCapsStatus() != FormatStatus.All)
{
textNotesToUpdate.Insert(textNote);
}
}
// Check whether we found any TextNotes that need to be formatted
if (textNotesToUpdate.IsEmpty)
{
//Do something if there are no notes to format
TaskDialog.Show("Nothing to do!", "There are no Text Notes to change to uppercase!");
}
// Apply the 'AllCaps' formatting to the TextNotes that still need it.
using (frmConvertTextNotes frm = new frmConvertTextNotes(document))
{
foreach (TextNote textNote in textNotesToUpdate)
{
Autodesk.Revit.DB.FormattedText formattedText = textNote.GetFormattedText();
formattedText.SetAllCapsStatus(true);
textNote.SetFormattedText(formattedText);
}
}
}
///<summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
Floor selectFloor = GetSelectFloor(commandData);
if (null == selectFloor)
{
message = "Make sure selected only one floor (Slab) in Revit.";
return(Autodesk.Revit.UI.Result.Failed);
}
SlabShapeEditingForm slabShapeEditingForm =
new SlabShapeEditingForm(selectFloor, commandData);
slabShapeEditingForm.ShowDialog();
return(Autodesk.Revit.UI.Result.Succeeded);
}
public override Result Execute(ExternalCommandData data, ref string message, DB.ElementSet elements)
{
// check to see if any document path is provided in journal data
// if yes, open the document
string filename = null;
if (data.JournalData.TryGetValue("Open", out filename) && File.Exists(filename))
{
GH.Guest.ShowAndOpenDocumentAsync(filename);
}
// otherwise, just open the GH window
else
{
GH.Guest.ShowAsync();
}
// whatever happens say success so Revit does not prompt errors
return(Result.Succeeded);
}
public override Result Execute(ExternalCommandData data, ref string message, DB.ElementSet elements)
{
GH_Document.EnableSolutions = !GH_Document.EnableSolutions;
if (GH_Document.EnableSolutions)
{
if (Instances.ActiveCanvas?.Document is GH_Document definition)
{
definition.NewSolution(false);
}
}
else
{
Revit.RefreshActiveView();
}
return(Result.Succeeded);
}
/// <summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
// Filter all printable views in current document and print them,
// the print will raise events registered in controlled application.
// After run this external command please refer to log files under folder of this assembly.
Document document = commandData.Application.ActiveUIDocument.Document;
try
{
List <Autodesk.Revit.DB.Element> viewElems = new List <Autodesk.Revit.DB.Element>();
FilteredElementCollector collector = new FilteredElementCollector(document);
viewElems.AddRange(collector.OfClass(typeof(View)).ToElements());
//
// Filter all printable views
ViewSet printableViews = new ViewSet();
foreach (View view in viewElems)
{
// skip view templates because they're invalid for print
if (!view.IsTemplate && view.CanBePrinted)
{
printableViews.Insert(view);
}
}
//
// Print to file to folder of assembly
String assemblyPath = Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
PrintManager pm = document.PrintManager;
pm.PrintToFile = true;
pm.PrintToFileName = assemblyPath + "\\PrintOut.prn";
pm.Apply();
//
// Print views now to raise events:
document.Print(printableViews);
}
catch (Exception ex)
{
message = ex.Message;
return(Autodesk.Revit.UI.Result.Failed);
}
//
// return succeed by default
return(Autodesk.Revit.UI.Result.Succeeded);
}
/// <summary>
/// The implementation of the automatic stairs creation command.
/// </summary>
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
UIDocument activeDocument = commandData.Application.ActiveUIDocument;
Document document = activeDocument.Document;
// Create an automation utility with a hardcoded stairs configuration number
StairsAutomationUtility utility = StairsAutomationUtility.Create(document, stairsConfigs[stairsIndex]);
// Generate the stairs
utility.GenerateStairs();
stairsIndex++;
if (stairsIndex > 4)
{
stairsIndex = 0;
}
return(Result.Succeeded);
}
///<summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
// Create an object that is responsible for collecting users inputs and getting analysis data of current model.
EnergyAnalysisModel analysisModel = new EnergyAnalysisModel(commandData.Application.ActiveUIDocument.Document);
// Create the UI for users inputs options and view analysis models.
using (OptionsAndAnalysisForm form = new OptionsAndAnalysisForm(analysisModel))
{
// make analysis data ready
analysisModel.Initialize();
// show dialog to browser analysis model
if (DialogResult.OK != form.ShowDialog())
{
return(Result.Cancelled);
}
}
return(Result.Succeeded);
}
///<summary>
/// Implement this method as an external command for Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
try
{
// create a SlaveSymbolGeometry object
SlaveSymbolGeometry slaveSymGeo = new SlaveSymbolGeometry(commandData.Application.ActiveUIDocument.Document);
// execute method to get and show geometry of all instances
slaveSymGeo.GetInstanceGeometry();
return(Result.Succeeded);
}
catch (Exception e)
{
message = e.Message;
message += e.StackTrace;
return(Result.Failed);
}
}
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
try
{
m_app = commandData.Application;
m_doc = m_app.ActiveUIDocument.Document;
ManagerWindow managerWindow = new ManagerWindow(m_app, ModelManagerMode.ProjectReplication);
Nullable <bool> dlgResult = managerWindow.ShowDialog();
return(Result.Succeeded);
}
catch (Exception ex)
{
MessageBox.Show("Failed to initialize Project Replication.\n" + ex.Message, "Project Replication", MessageBoxButton.OK, MessageBoxImage.Warning);
return(Result.Cancelled);
}
}
// necessary method that Revit needs to call
Result IExternalCommand.Execute(
ExternalCommandData excmd,
ref string mainmessage,
Autodesk.Revit.DB.ElementSet elemset)
{
// if any of the private fields are incorrect - let Revit re-correct them
// tried doing this before initializing the fields
// if(
// (!_mainMessage.Equals(mainmessage)) ||
// (!_externalCMD.Equals(excmd)) ||
// (!_elementSet.Equals(elemset)))
// {
_mainMessage = mainmessage;
_externalCMD = excmd;
_elementSet = elemset;
// }
return(Execute());
}
public Result Execute(ExternalCommandData commandData, ref string message, Autodesk.Revit.DB.ElementSet elements)
{
UIDocument doc = commandData.Application.ActiveUIDocument;
using (Transaction trans = new Transaction(doc.Document))
{
trans.Start("Select model curves in revit document");
IList <Reference> refList = doc.Selection.PickObjects(Autodesk.Revit.UI.Selection.ObjectType.Element,
"Please pick some model curves in revit document"
);
DividedPath dpath = DividedPath.Create(doc.Document, refList);
trans.Commit();
}
return(Result.Succeeded);
}
/// <summary>
/// Checks at API address
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
//loads from settings.txt
settings.LoadSettings();
PricingHttpRest.InitializeClient(settings.APILocation, "");
try
{
string result = PricingHttpRest.Get();
System.Windows.Forms.MessageBox.Show("Status code: " + PricingHttpRest.receivedCode + " Reason: " + result + " Received content: " + PricingHttpRest.receivedContent);
}
catch (Exception ex)
{
System.Windows.Forms.MessageBox.Show("Error accessing API");
}
return(Autodesk.Revit.UI.Result.Succeeded);
}
// Internal method that allows this class to use this private fields it contains
// without having to set them necessarily.
protected Result Execute(
ExternalCommandData excmd,
string mainmessage,
Autodesk.Revit.DB.ElementSet elemset)
{
try
{
// defined in derived classes
return(Work());
}
catch
{
logger.Debug("Command failed because of an exception");
TaskDialog.Show("Command Failed",
"There was an error behind the scenes that caused the command to fail horribly and die.");
}
return(Result.Failed);
}
/// <summary>
/// Overload this method to implement the external command within Revit.
/// </summary>
/// <param name="commandData">An object that is passed to the external application
/// which contains data related to the command,
/// such as the application object and active view.</param>
/// <param name="message">A message that can be set by the external application
/// which will be displayed if a failure or cancellation is returned by
/// the external command.</param>
/// <param name="elements">A set of elements to which the external application
/// can add elements that are to be highlighted in case of failure or cancellation.</param>
/// <returns>Return the status of the external command.
/// A result of Succeeded means that the API external method functioned as expected.
/// Cancelled can be used to signify that the user cancelled the external operation
/// at some point. Failure should be returned if the application is unable to proceed with
/// the operation.</returns>
public Autodesk.Revit.UI.Result Execute(ExternalCommandData commandData,
ref string message, Autodesk.Revit.DB.ElementSet elements)
{
ElementSet selections = commandData.Application.ActiveUIDocument.Selection.Elements;
ElementSet dimsToDelete = new Autodesk.Revit.DB.ElementSet();
//warning if nothing selected
if (0 == selections.Size)
{
message = "Please select dimensions";
return Autodesk.Revit.UI.Result.Failed;
}
//find all unpinned dimensions in the current selection
foreach (Element e in selections)
{
Dimension dimesionTemp = e as Dimension;
if (null != dimesionTemp && !dimesionTemp.Pinned)
{
dimsToDelete.Insert(dimesionTemp);
}
}
//warning if could not find any unpinned dimension
if (0 == dimsToDelete.Size)
{
message = "There are no unpinned dimensions currently selected";
return Autodesk.Revit.UI.Result.Failed;
}
Transaction transaction = new Transaction(commandData.Application.ActiveUIDocument.Document, "External Tool");
transaction.Start();
//delete all the unpinned dimensions
commandData.Application.ActiveUIDocument.Document.Delete(dimsToDelete);
transaction.Commit();
return Autodesk.Revit.UI.Result.Succeeded;
}
public StructSample(Autodesk.Revit.UI.UIApplication app, ElementSet ss)
{
m_app = app;
m_ss = ss;
}