// Create the correct type of linkset for this child
public static BSLinkset Factory(BSScene physScene, BSPrimLinkable parent)
{
BSLinkset ret = null;
switch ((int)BSParam.LinksetImplementation)
{
case (int)LinksetImplementation.Constraint:
ret = new BSLinksetConstraints(physScene, parent);
break;
case (int)LinksetImplementation.Compound:
ret = new BSLinksetCompound(physScene, parent);
break;
case (int)LinksetImplementation.Manual:
break;
case (int)LinksetImplementation.CompoundGroup:
ret = new BSLinksetGroupCompound(physScene, parent);
break;
default:
ret = new BSLinksetCompound(physScene, parent);
break;
}
if (ret == null)
{
physScene.Logger.ErrorFormat("[BULLETSIM LINKSET] Factory could not create linkset. Parent name={1}, ID={2}", parent.Name, parent.LocalID);
}
return(ret);
}
public BSActor(BSScene physicsScene, BSPhysObject pObj, string actorName)
{
m_physicsScene = physicsScene;
m_controllingPrim = pObj;
ActorName = actorName;
Enabled = true;
}
public BSTerrainManager(BSScene physicsScene)
{
PhysicsScene = physicsScene;
// Assume one region of default size
m_worldMax = new Vector3(physicsScene.Scene.RegionInfo.RegionSizeX,
physicsScene.Scene.RegionInfo.RegionSizeY, physicsScene.Scene.RegionInfo.RegionSizeZ);
}
public PhysicsScene GetScene()
{
if (_mScene == null)
{
_mScene = new BSScene();
}
return(_mScene);
}
// Apply the specificed collision mask into the physical world
public virtual bool ApplyCollisionMask(BSScene physicsScene)
{
// Should assert the body has been added to the physical world.
// (The collision masks are stored in the collision proxy cache which only exists for
// a collision body that is in the world.)
return(physicsScene.PE.SetCollisionGroupMask(this,
BulletSimData.CollisionTypeMasks[collisionType].group,
BulletSimData.CollisionTypeMasks[collisionType].mask));
}
public BSCharacter(uint localID, String avName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size, bool isFlying)
: base(parent_scene, localID, avName, "BSCharacter")
{
_position = pos;
_flying = isFlying;
_orientation = OMV.Quaternion.Identity;
RawVelocity = OMV.Vector3.Zero;
_buoyancy = ComputeBuoyancyFromFlying(isFlying);
Friction = BSParam.AvatarStandingFriction;
Density = BSParam.AvatarDensity / BSParam.DensityScaleFactor;
// Old versions of ScenePresence passed only the height. If width and/or depth are zero,
// replace with the default values.
_size = size;
if (_size.X == 0f)
{
_size.X = BSParam.AvatarCapsuleDepth;
}
if (_size.Y == 0f)
{
_size.Y = BSParam.AvatarCapsuleWidth;
}
// The dimensions of the physical capsule are kept in the scale.
// Physics creates a unit capsule which is scaled by the physics engine.
Scale = ComputeAvatarScale(_size);
// set _avatarVolume and _mass based on capsule size, _density and Scale
ComputeAvatarVolumeAndMass();
// The avatar's movement is controlled by this motor that speeds up and slows down
// the avatar seeking to reach the motor's target speed.
// This motor runs as a prestep action for the avatar so it will keep the avatar
// standing as well as moving. Destruction of the avatar will destroy the pre-step action.
m_moveActor = new BSActorAvatarMove(PhysicsScene, this, AvatarMoveActorName);
PhysicalActors.Add(AvatarMoveActorName, m_moveActor);
DetailLog("{0},BSCharacter.create,call,size={1},scale={2},density={3},volume={4},mass={5}",
LocalID, _size, Scale, Density, _avatarVolume, RawMass);
// do actual creation in taint time
PhysicsScene.TaintedObject("BSCharacter.create", delegate()
{
DetailLog("{0},BSCharacter.create,taint", LocalID);
// New body and shape into PhysBody and PhysShape
PhysicsScene.Shapes.GetBodyAndShape(true, PhysicsScene.World, this);
SetPhysicalProperties();
SubscribeEvents(1000);
});
return;
}
// This minCoords and maxCoords passed in give the size of the terrain (min and max Z
// are the high and low points of the heightmap).
public BSTerrainHeightmap(BSScene physicsScene, Vector3 regionBase, uint id, float[] initialMap,
Vector3 minCoords, Vector3 maxCoords)
: base(physicsScene, regionBase, id)
{
m_mapInfo = new BulletHMapInfo(id, initialMap);
m_mapInfo.minCoords = minCoords;
m_mapInfo.maxCoords = maxCoords;
m_mapInfo.minZ = minCoords.Z;
m_mapInfo.maxZ = maxCoords.Z;
m_mapInfo.terrainRegionBase = TerrainBase;
// Don't have to free any previous since we just got here.
BuildHeightmapTerrain();
}
public BSPrimLinkable(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical, int material, float friction,
float restitution, float gravityMultiplier, float density)
: base(localID, primName, parent_scene, pos, size, rotation, pbs, pisPhysical)
{
Linkset = BSLinkset.Factory(PhysicsScene, this);
PhysicsScene.TaintedObject("BSPrimLinksetCompound.Refresh", delegate()
{
base.SetMaterial(material);
base.Friction = friction;
base.Restitution = restitution;
base.GravityMultiplier = gravityMultiplier;
base.Density = density;
Linkset.Refresh(this);
});
}
protected BSLinkset(BSScene scene, BSPrimLinkable parent)
{
// A simple linkset of one (no children)
LinksetID = m_nextLinksetID++;
// We create LOTS of linksets.
if (m_nextLinksetID <= 0)
{
m_nextLinksetID = 1;
}
PhysicsScene = scene;
LinksetRoot = parent;
m_children = new HashSet <BSPrimLinkable>();
LinksetMass = parent.RawMass;
Rebuilding = false;
parent.ClearDisplacement();
}
// Constructor to build a default, flat heightmap terrain.
public BSTerrainHeightmap(BSScene physicsScene, Vector3 regionBase, uint id, Vector3 regionSize)
: base(physicsScene, regionBase, id)
{
Vector3 minTerrainCoords = new Vector3(0f, 0f, BSTerrainManager.HEIGHT_INITIALIZATION - BSTerrainManager.HEIGHT_EQUAL_FUDGE);
Vector3 maxTerrainCoords = new Vector3(regionSize.X, regionSize.Y, BSTerrainManager.HEIGHT_INITIALIZATION);
int totalHeights = (int)maxTerrainCoords.X * (int)maxTerrainCoords.Y;
float[] initialMap = new float[totalHeights];
for (int ii = 0; ii < totalHeights; ii++)
{
initialMap[ii] = BSTerrainManager.HEIGHT_INITIALIZATION;
}
m_mapInfo = new BulletHMapInfo(id, initialMap);
m_mapInfo.minCoords = minTerrainCoords;
m_mapInfo.maxCoords = maxTerrainCoords;
m_mapInfo.terrainRegionBase = TerrainBase;
// Don't have to free any previous since we just got here.
BuildHeightmapTerrain();
}
// Get a reference to a physical shape. Create if it doesn't exist
public static BSShape GetShapeReference(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
{
BSShape ret = null;
if (prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_CAPSULE)
{
// an avatar capsule is close to a native shape (it is not shared)
ret = BSShapeNative.GetReference(physicsScene, prim, BSPhysicsShapeType.SHAPE_CAPSULE,
FixedShapeKey.KEY_CAPSULE);
physicsScene.DetailLog("{0},BSShape.GetShapeReference,avatarCapsule,shape={1}", prim.LocalID, ret);
}
// Compound shapes are handled special as they are rebuilt from scratch.
// This isn't too great a hardship since most of the child shapes will have already been created.
if (ret == null && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_COMPOUND)
{
// Getting a reference to a compound shape gets you the compound shape with the root prim shape added
ret = BSShapeCompound.GetReference(prim);
physicsScene.DetailLog("{0},BSShapeCollection.CreateGeom,compoundShape,shape={1}", prim.LocalID, ret);
}
// Avatars have their own unique shape
if (ret == null && prim.PreferredPhysicalShape == BSPhysicsShapeType.SHAPE_AVATAR)
{
// Getting a reference to a compound shape gets you the compound shape with the root prim shape added
ret = BSShapeAvatar.GetReference(prim);
physicsScene.DetailLog("{0},BSShapeCollection.CreateGeom,avatarShape,shape={1}", prim.LocalID, ret);
}
if (ret == null)
{
ret = GetShapeReferenceNonSpecial(physicsScene, forceRebuild, prim);
}
return(ret);
}
protected BSPhysObject(BSScene parentScene, uint localID, string name, string typeName)
{
PhysicsScene = parentScene;
LocalID = localID;
PhysObjectName = name;
Name = name; // PhysicsActor also has the name of the object. Someday consolidate.
TypeName = typeName;
// The collection of things that push me around
PhysicalActors = new BSActorCollection(PhysicsScene);
// Initialize variables kept in base.
GravityMultiplier = 1.0f;
Gravity = new OMV.Vector3(0f, 0f, BSParam.Gravity);
// We don't have any physical representation yet.
PhysBody = new BulletBody(localID);
PhysShape = new BulletShape();
PrimAssetState = PrimAssetCondition.Unknown;
// Default material type. Also sets Friction, Restitution and Density.
SetMaterial((int)MaterialAttributes.Material.Wood);
CollisionCollection = new CollisionEventUpdate();
CollisionsLastTick = CollisionCollection;
SubscribedEventsMs = 0;
CollidingStep = 0;
TrueCollidingStep = 0;
CollisionAccumulation = 0;
ColliderIsMoving = false;
CollisionScore = 0;
// All axis free.
LockedAxis = LockedAxisFree;
}
public BSActorSetForce(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_forceMotor = null;
m_physicsScene.DetailLog("{0},BSActorSetForce,constructor", m_controllingPrim.LocalID);
}
public BSPrimDisplaced(uint localID, String primName, BSScene parent_scene, OMV.Vector3 pos, OMV.Vector3 size,
OMV.Quaternion rotation, PrimitiveBaseShape pbs, bool pisPhysical)
: base(localID, primName, parent_scene, pos, size, rotation, pbs, pisPhysical)
{
ClearDisplacement();
}
public BSConstraint(BulletWorld world)
{
m_world = world;
PhysicsScene = m_world.physicsScene;
}
public BSActorCollection(BSScene physicsScene)
{
m_physicsScene = physicsScene;
m_actors = new Dictionary <string, BSActor>();
}
public BSTerrainPhys(BSScene physicsScene, Vector3 regionBase, uint id)
{
PhysicsScene = physicsScene;
TerrainBase = regionBase;
ID = id;
}
// Convert the passed heightmap to mesh information suitable for CreateMeshShape2().
// Version that handles magnification.
// Return 'true' if successfully created.
public static bool ConvertHeightmapToMesh2(BSScene physicsScene,
float[] heightMap, int sizeX, int sizeY, // parameters of incoming heightmap
int magnification, // number of vertices per heighmap step
Vector3 extent, // dimensions of the output mesh
Vector3 extentBase, // base to be added to all vertices
out int indicesCountO, out int[] indicesO,
out int verticesCountO, out float[] verticesO)
{
bool ret = false;
int indicesCount = 0;
int verticesCount = 0;
int[] indices = new int[0];
float[] vertices = new float[0];
HeightMapGetter hmap = new HeightMapGetter(heightMap, sizeX, sizeY);
// The vertices dimension of the output mesh
int meshX = sizeX * magnification;
int meshY = sizeY * magnification;
// The output size of one mesh step
float meshXStep = extent.X / meshX;
float meshYStep = extent.Y / meshY;
// Create an array of vertices that is meshX+1 by meshY+1 (note the loop
// from zero to <= meshX). The triangle indices are then generated as two triangles
// per heightmap point. There are meshX by meshY of these squares. The extra row and
// column of vertices are used to complete the triangles of the last row and column
// of the heightmap.
try
{
// Vertices for the output heightmap plus one on the side and bottom to complete triangles
int totalVertices = (meshX + 1) * (meshY + 1);
vertices = new float[totalVertices * 3];
int totalIndices = meshX * meshY * 6;
indices = new int[totalIndices];
if (physicsScene != null)
{
physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh2,inSize={1},outSize={2},totVert={3},totInd={4},extentBase={5}",
BSScene.DetailLogZero, new Vector2(sizeX, sizeY), new Vector2(meshX, meshY),
totalVertices, totalIndices, extentBase);
}
float minHeight = float.MaxValue;
// Note that sizeX+1 vertices are created since there is land between this and the next region.
// Loop through the output vertices and compute the mediun height in between the input vertices
for (int yy = 0; yy <= meshY; yy++)
{
for (int xx = 0; xx <= meshX; xx++) // Hint: the "<=" means we go around sizeX + 1 times
{
float offsetY = (float)yy * (float)sizeY / (float)meshY; // The Y that is closest to the mesh point
int stepY = (int)offsetY;
float fractionalY = offsetY - (float)stepY;
float offsetX = (float)xx * (float)sizeX / (float)meshX; // The X that is closest to the mesh point
int stepX = (int)offsetX;
float fractionalX = offsetX - (float)stepX;
// get the four corners of the heightmap square the mesh point is in
float heightUL = hmap.GetHeight(stepX, stepY);
float heightUR = hmap.GetHeight(stepX + 1, stepY);
float heightLL = hmap.GetHeight(stepX, stepY + 1);
float heightLR = hmap.GetHeight(stepX + 1, stepY + 1);
// bilinear interplolation
float height = heightUL * (1 - fractionalX) * (1 - fractionalY)
+ heightUR * fractionalX * (1 - fractionalY)
+ heightLL * (1 - fractionalX) * fractionalY
+ heightLR * fractionalX * fractionalY;
minHeight = Math.Min(minHeight, height);
vertices[verticesCount + 0] = (float)xx * meshXStep + extentBase.X;
vertices[verticesCount + 1] = (float)yy * meshYStep + extentBase.Y;
vertices[verticesCount + 2] = height + extentBase.Z;
verticesCount += 3;
}
}
// The number of vertices generated
verticesCount /= 3;
// Loop through all the heightmap squares and create indices for the two triangles for that square
for (int yy = 0; yy < meshY; yy++)
{
for (int xx = 0; xx < meshX; xx++)
{
int offset = yy * (meshX + 1) + xx;
// Each vertices is presumed to be the upper left corner of a box of two triangles
indices[indicesCount + 0] = offset;
indices[indicesCount + 1] = offset + 1;
indices[indicesCount + 2] = offset + meshX + 1; // accounting for the extra column
indices[indicesCount + 3] = offset + 1;
indices[indicesCount + 4] = offset + meshX + 2;
indices[indicesCount + 5] = offset + meshX + 1;
indicesCount += 6;
}
}
ret = true;
}
catch (Exception e)
{
if (physicsScene != null)
{
physicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh. For={1}/{2}, e={3}",
LogHeader, physicsScene.RegionName, extentBase, e);
}
}
indicesCountO = indicesCount;
indicesO = indices;
verticesCountO = verticesCount;
verticesO = vertices;
return(ret);
}
public BulletWorld(uint worldId, BSScene bss)
{
worldID = worldId;
physicsScene = bss;
}
public static BSShape GetShapeReferenceNonNative(BSScene physicsScene, bool forceRebuild, BSPhysObject prim)
{
return(null);
}
// Release the use of a physical shape. public abstract void Dereference(BSScene physicsScene);
public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id, Vector3 regionSize)
: base(physicsScene, regionBase, id)
{
}
public override void Dereference(BSScene physicsScene) /* The magic of garbage collection will make this go away */ }
public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id /* parameters for making mesh */)
: base(physicsScene, regionBase, id)
{
}
public BSLinksetConstraints(BSScene scene, BSPrimLinkable parent)
: base(scene, parent)
{
}
// Convert the passed heightmap to mesh information suitable for CreateMeshShape2().
// Return 'true' if successfully created.
public static bool ConvertHeightmapToMesh(BSScene physicsScene,
float[] heightMap, int sizeX, int sizeY, // parameters of incoming heightmap
Vector3 extentBase, // base to be added to all vertices
out int indicesCountO, out int[] indicesO,
out int verticesCountO, out float[] verticesO)
{
bool ret = false;
int indicesCount = 0;
int verticesCount = 0;
int[] indices = new int[0];
float[] vertices = new float[0];
// Simple mesh creation which assumes magnification == 1.
// TODO: do a more general solution that scales, adds new vertices and smoothes the result.
// Create an array of vertices that is sizeX+1 by sizeY+1 (note the loop
// from zero to <= sizeX). The triangle indices are then generated as two triangles
// per heightmap point. There are sizeX by sizeY of these squares. The extra row and
// column of vertices are used to complete the triangles of the last row and column
// of the heightmap.
try
{
// One vertice per heightmap value plus the vertices off the side and bottom edge.
int totalVertices = (sizeX + 1) * (sizeY + 1);
vertices = new float[totalVertices * 3];
int totalIndices = sizeX * sizeY * 6;
indices = new int[totalIndices];
if (physicsScene != null)
{
physicsScene.DetailLog("{0},BSTerrainMesh.ConvertHeightMapToMesh,totVert={1},totInd={2},extentBase={3}",
BSScene.DetailLogZero, totalVertices, totalIndices, extentBase);
}
float minHeight = float.MaxValue;
// Note that sizeX+1 vertices are created since there is land between this and the next region.
for (int yy = 0; yy <= sizeY; yy++)
{
for (int xx = 0; xx <= sizeX; xx++) // Hint: the "<=" means we go around sizeX + 1 times
{
int offset = yy * sizeX + xx;
// Extend the height with the height from the last row or column
if (yy == sizeY)
{
offset -= sizeX;
}
if (xx == sizeX)
{
offset -= 1;
}
float height = heightMap[offset];
minHeight = Math.Min(minHeight, height);
vertices[verticesCount + 0] = (float)xx + extentBase.X;
vertices[verticesCount + 1] = (float)yy + extentBase.Y;
vertices[verticesCount + 2] = height + extentBase.Z;
verticesCount += 3;
}
}
verticesCount = verticesCount / 3;
for (int yy = 0; yy < sizeY; yy++)
{
for (int xx = 0; xx < sizeX; xx++)
{
int offset = yy * (sizeX + 1) + xx;
// Each vertices is presumed to be the upper left corner of a box of two triangles
indices[indicesCount + 0] = offset;
indices[indicesCount + 1] = offset + 1;
indices[indicesCount + 2] = offset + sizeX + 1; // accounting for the extra column
indices[indicesCount + 3] = offset + 1;
indices[indicesCount + 4] = offset + sizeX + 2;
indices[indicesCount + 5] = offset + sizeX + 1;
indicesCount += 6;
}
}
ret = true;
}
catch (Exception e)
{
if (physicsScene != null)
{
physicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh. For={1}/{2}, e={3}",
LogHeader, physicsScene.RegionName, extentBase, e);
}
}
indicesCountO = indicesCount;
indicesO = indices;
verticesCountO = verticesCount;
verticesO = vertices;
return(ret);
}
public BSLinksetGroupCompound(BSScene scene, BSPrimLinkable parent)
: base(scene, parent)
{
}
public BSActorLockAxis(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_physicsScene.DetailLog("{0},BSActorLockAxis,constructor", m_controllingPrim.LocalID);
LockAxisConstraint = null;
}
public BSActorAvatarMove(BSScene physicsScene, BSPhysObject pObj, string actorName)
: base(physicsScene, pObj, actorName)
{
m_velocityMotor = null;
m_physicsScene.DetailLog("{0},BSActorAvatarMove,constructor", m_controllingPrim.LocalID);
}
// Create terrain mesh from a heightmap.
public BSTerrainMesh(BSScene physicsScene, Vector3 regionBase, uint id, float[] initialMap,
Vector3 minCoords, Vector3 maxCoords)
: base(physicsScene, regionBase, id)
{
int indicesCount;
int[] indices;
int verticesCount;
float[] vertices;
m_savedHeightMap = initialMap;
m_sizeX = (int)(maxCoords.X - minCoords.X);
m_sizeY = (int)(maxCoords.Y - minCoords.Y);
bool meshCreationSuccess = false;
if (BSParam.TerrainMeshMagnification == 1)
{
// If a magnification of one, use the old routine that is tried and true.
meshCreationSuccess = BSTerrainMesh.ConvertHeightmapToMesh(PhysicsScene,
initialMap, m_sizeX, m_sizeY, // input size
Vector3.Zero, // base for mesh
out indicesCount, out indices, out verticesCount, out vertices);
}
else
{
// Other magnifications use the newer routine
meshCreationSuccess = BSTerrainMesh.ConvertHeightmapToMesh2(PhysicsScene,
initialMap, m_sizeX, m_sizeY, // input size
BSParam.TerrainMeshMagnification,
physicsScene.TerrainManager.WorldMax,
Vector3.Zero, // base for mesh
out indicesCount, out indices, out verticesCount, out vertices);
}
if (!meshCreationSuccess)
{
// DISASTER!!
PhysicsScene.DetailLog("{0},BSTerrainMesh.create,failedConversionOfHeightmap,id={1}", BSScene.DetailLogZero, ID);
PhysicsScene.Logger.ErrorFormat("{0} Failed conversion of heightmap to mesh! base={1}", LogHeader, TerrainBase);
// Something is very messed up and a crash is in our future.
return;
}
PhysicsScene.DetailLog("{0},BSTerrainMesh.create,meshed,id={1},indices={2},indSz={3},vertices={4},vertSz={5}",
BSScene.DetailLogZero, ID, indicesCount, indices.Length, verticesCount, vertices.Length);
m_terrainShape = PhysicsScene.PE.CreateMeshShape(PhysicsScene.World, indicesCount, indices, verticesCount, vertices);
if (!m_terrainShape.HasPhysicalShape)
{
// DISASTER!!
PhysicsScene.DetailLog("{0},BSTerrainMesh.create,failedCreationOfShape,id={1}", BSScene.DetailLogZero, ID);
PhysicsScene.Logger.ErrorFormat("{0} Failed creation of terrain mesh! base={1}", LogHeader, TerrainBase);
// Something is very messed up and a crash is in our future.
return;
}
Vector3 pos = regionBase;
Quaternion rot = Quaternion.Identity;
m_terrainBody = PhysicsScene.PE.CreateBodyWithDefaultMotionState(m_terrainShape, ID, pos, rot);
if (!m_terrainBody.HasPhysicalBody)
{
// DISASTER!!
PhysicsScene.Logger.ErrorFormat("{0} Failed creation of terrain body! base={1}", LogHeader, TerrainBase);
// Something is very messed up and a crash is in our future.
return;
}
physicsScene.PE.SetShapeCollisionMargin(m_terrainShape, BSParam.TerrainCollisionMargin);
// Set current terrain attributes
PhysicsScene.PE.SetFriction(m_terrainBody, BSParam.TerrainFriction);
PhysicsScene.PE.SetHitFraction(m_terrainBody, BSParam.TerrainHitFraction);
PhysicsScene.PE.SetRestitution(m_terrainBody, BSParam.TerrainRestitution);
PhysicsScene.PE.SetContactProcessingThreshold(m_terrainBody, BSParam.TerrainContactProcessingThreshold);
PhysicsScene.PE.SetCollisionFlags(m_terrainBody, CollisionFlags.CF_STATIC_OBJECT);
// Static objects are not very massive.
PhysicsScene.PE.SetMassProps(m_terrainBody, 0f, Vector3.Zero);
// Put the new terrain to the world of physical objects
PhysicsScene.PE.AddObjectToWorld(PhysicsScene.World, m_terrainBody);
// Redo its bounding box now that it is in the world
PhysicsScene.PE.UpdateSingleAabb(PhysicsScene.World, m_terrainBody);
m_terrainBody.collisionType = CollisionType.Terrain;
m_terrainBody.ApplyCollisionMask(PhysicsScene);
if (BSParam.UseSingleSidedMeshes)
{
PhysicsScene.DetailLog("{0},BSTerrainMesh.settingCustomMaterial,id={1}", BSScene.DetailLogZero, id);
PhysicsScene.PE.AddToCollisionFlags(m_terrainBody, CollisionFlags.CF_CUSTOM_MATERIAL_CALLBACK);
}
// Make it so the terrain will not move or be considered for movement.
PhysicsScene.PE.ForceActivationState(m_terrainBody, ActivationState.DISABLE_SIMULATION);
}