private int initGatePositionPara()
{
int error_code;
double delay = 0;
double width = 0;
double threshold = 0;
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref delay);
if (error_code != 0)
{
return(error_code);
}
numUpDownDelay.Text = delay.ToString();
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref width);
if (error_code != 0)
{
return(error_code);
}
numUpDownWidth.Text = width.ToString();
error_code = GetGateDAQ.Threshold(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref threshold);
if (error_code != 0)
{
return(error_code);
}
numUpDownThreshold.Text = threshold.ToString();
return(error_code);
}
private void tolMonitorAccordToGate(GateType gateType, int tolMonitorIndex)
{
int error_code;
double delay = 0;
double width = 0;
double tolMonitorMax;
double tolMonitorMin;
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref delay);
if (error_code != 0)
{
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref width);
if (error_code != 0)
{
return;
}
tolMonitorMin = delay;
tolMonitorMax = delay + width;
((NumericUpDown)(Controls.Find("numUpDownMax" + tolMonitorIndex, true)[0])).Text = tolMonitorMax.ToString();
((NumericUpDown)(Controls.Find("numUpDownMin" + tolMonitorIndex, true)[0])).Text = tolMonitorMin.ToString();
}
public static bool setTofMode(uint sessionIndex, uint port, GateType gateNum, TofMode tofMode)
{
int error_code;
bool isSetPre = false;
AscanWaveDectionMode waveMode = AscanWaveDectionMode.Rf;
IFActive iFGate = IFActive.OFF;
error_code = GetGateDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, ref iFGate);
if (error_code != 0)
{
return(isSetPre = true);
}
error_code = GetAsacnVideoDAQ.DetectionWaveMode(SelectAscan.sessionIndex, SelectAscan.port, ref waveMode);
if (error_code != 0)
{
return(isSetPre = true);
}
if (tofMode == TofMode.ZeroAfter || tofMode == TofMode.ZeroBefore)
{
if (waveMode != AscanWaveDectionMode.Rf)
{
MessageShow.show("Warn:TOF Mode = Zero Befor,Need to set Wave Mode->RF Mode!",
"警告：TOF模式为Zero Befor，必须设置检波模式为RF模式");
return(isSetPre = true);
}
else if ((gateNum == GateType.I) && (iFGate == IFActive.ON))
{
MessageShow.show("Warn:The function of IF Gate or IF Start has opened, can't Set!",
"警告：IF Gate 或 IF Start功能开启，不能设置!");
return(isSetPre = true);
}
}
else if (tofMode == TofMode.Peak)
{
if ((gateNum == GateType.I) && (iFGate == IFActive.ON))
{
MessageShow.show("Warn:The function of IF Gate or IF Start has opened, can't Set!",
"警告:IF Gate 或 IF Start功能开启，不能设置!");
return(isSetPre = true);
}
}
error_code = SetGateDAQ.tofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, tofMode);
if (error_code != 0)
{
return(isSetPre = true);
}
return(isSetPre);
}
private int initRadioButttonOfGateLogic()
{
int error_code;
GateAlarmLogic gateLogic = GateAlarmLogic.Negative;
GateAlarmActive alarmActive = GateAlarmActive.OFF;
error_code = GetGateDAQ.AlarmActive(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref alarmActive);
if (error_code != 0)
{
return(error_code);
}
if (alarmActive == GateAlarmActive.OFF)
{
radioButtonOff.Checked = true;
return(error_code);
}
else if (alarmActive == GateAlarmActive.ON)
{
error_code = GetGateDAQ.AlarmLogic(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref gateLogic);
if (error_code != 0)
{
return(error_code);
}
switch (gateLogic)
{
case GateAlarmLogic.Negative:
radioButtonNegative.Checked = true;
break;
case GateAlarmLogic.Positive:
radioButtonPositive.Checked = true;
break;
default:
error_code = -1;
MessageShow.show("Warn:Bind the controls of gate logic failed!", "警告：绑定Gate logic 的控件失败!");
break;
}
return(error_code);
}
else
{
MessageShow.show("Warn:Get the testing of gate logic!", "警告：获取Gate logic 的测试模式!");
return(error_code = -1);
}
}
private int initNumUpDownSupressCount()
{
int error_code;
uint supressCount = 0;
error_code = GetGateDAQ.ScCounter(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref supressCount);
if (error_code != 0)
{
checkBoxOn.Checked = false;
numUpDownSupressCount.Enabled = false;
}
else
{
numUpDownSupressCount.Value = supressCount;
}
return(error_code);
}
private void CalTchartY_D(GateType gate1, GateType gate2)
{
double delay1 = 0, delay2 = 0, width1 = 0, width2 = 0;
int error_code;
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gate1, ref delay1);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();
return;
}
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gate2, ref delay2);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gate1, ref width1);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gate2, ref width2);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();
return;
}
if ((width1 + delay1) > (width2 + delay2))
{
this.tChartA_y2 = (width1 + delay1) - delay2 + 5;
}
else
{
this.tChartA_y2 = (width2 + delay2) - delay1 + 5;
}
this.tChartA_y1 = 0;
}
private void CalTchartY_D(GateType gate1, GateType gate2)
{
double delay1 = 0, delay2 = 0, width1 = 0, width2 = 0;
int error_code;
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gate1, ref delay1);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
start = false; //制成false 后就画不了图了，怎么办
return;
}
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gate2, ref delay2);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
start = false;
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gate1, ref width1);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
start = false;
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gate2, ref width2);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
start = false;
return;
}
if ((width1 + delay1) > (width2 + delay2))
{
this.tChart_y2 = (width1 + delay1) - delay2;
}
else
{
this.tChart_y2 = (width2 + delay2) - delay1;
}
this.tChart_y1 = 0;
}
/**Set wave mode to Positive、Negative、Full Wave acocording to tofMode.*/
public static bool WaveMode(uint ascanNum, uint ascanPort, AscanWaveDectionMode waveMode)
{
int error_code;
int gateTotNum = 4;
GateType gateNum;
int gateI = (int)GateType.I;
int gateA = (int)GateType.A;
int gateB = (int)GateType.B;
int gateC = (int)GateType.C;
bool isSetPre = true;
TofMode[] tofMode = new TofMode[gateTotNum];
TofMode tofModeFlank = TofMode.Flank;
for (int i = 0; i < gateTotNum; i++)
{
gateNum = (GateType)i;
error_code = GetGateDAQ.TofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref tofMode[i]);
if (error_code != 0)
{
return(isSetPre);
}
}
if (waveMode == AscanWaveDectionMode.SemiPositve || waveMode == AscanWaveDectionMode.SemiNegtive ||
waveMode == AscanWaveDectionMode.Full)
{
if (tofMode[gateI] > tofModeFlank || tofMode[gateA] > tofModeFlank ||
tofMode[gateB] > tofModeFlank || tofMode[gateC] > tofModeFlank) //Tof Mode are Zero Before or Zero After
{
MessageShow.show("Tof Mode = Zero Before or Zero After, need to set Receiver->RF!",
"Tof Mode = Zero Before or Zero After,必须设置Receiver->RF!");
return(isSetPre);
}
}
error_code = SetAscanVideoDAQ.DetectionWaveMode(ascanNum, ascanPort, waveMode);
if (error_code != 0)
{
return(isSetPre);
}
return(isSetPre = false);
}
public static int getTOfMode(uint sessionIndex, GateType gateNum, List <TofMode> list)
{
int error_code = 0;
TofMode tofMode = TofMode.Flank;
for (int i = 0; i < batchSessionsInfo.Count; i++)
{
if (batchSessionsInfo[i].sessionIndex == sessionIndex)
{
error_code = GetGateDAQ.TofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref tofMode);
if (error_code != 0)
{
break;
}
list.Add(tofMode);
}
}
return(error_code);
}
private void getGateTolMonitor(GateType gateType, DGateType dGatetType, int tolMonitorIndex)
{
int error_code;
double min = 0;
double max = 0;
uint suppressCnt = 0;
//Close double gate tolerance active
error_code = SetDGateDAQ.TolMonitorActive(SelectAscan.sessionIndex, SelectAscan.port, dGatetType, TMActive.OFF);
if (error_code != 0)
{
return;
}
//Open gate tolerance active
error_code = SetGateDAQ.TolMonitorActive(SelectAscan.sessionIndex, SelectAscan.port, gateType, TMActive.ON);
if (error_code != 0)
{
return;
}
error_code = GetGateDAQ.TolMonitorMax(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref max);
if (error_code != 0)
{
return;
}
((NumericUpDown)(Controls.Find("numUpDownMax" + tolMonitorIndex, true)[0])).Text = max.ToString();
error_code = GetGateDAQ.TolMonitorMin(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref min);
if (error_code != 0)
{
return;
}
((NumericUpDown)(Controls.Find("numUpDownMin" + tolMonitorIndex, true)[0])).Text = min.ToString();
error_code = GetGateDAQ.TolMonitorSc(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref suppressCnt);
if (error_code != 0)
{
return;
}
((NumericUpDown)(Controls.Find("numUpDownSc" + tolMonitorIndex, true)[0])).Text = suppressCnt.ToString();
}
private int initGateIf()
{
int error_code = 0;
if (gateNum != GateType.I)
{
checkBoxIF.Checked = false;
return(error_code);
}
else
{
IFActive ifActive = IFActive.OFF;
error_code |= GetGateDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, ref ifActive);
if (ifActive == IFActive.ON)
{
checkBoxIF.Checked = true;
}
return(error_code);
}
}
private void initTolerance()
{
int error_code;
TMActive gateActive = TMActive.OFF;
TMActive dGateActive = TMActive.OFF;
for (int tolMonitorIndex = 0; tolMonitorIndex < 4; tolMonitorIndex++)
{
error_code = GetGateDAQ.TolMonitorActive(SelectAscan.sessionIndex, SelectAscan.port, (GateType)tolMonitorIndex, ref gateActive);
if (error_code != 0)
{
return;
}
error_code = GetDGateDAQ.TolMonitorActive(SelectAscan.sessionIndex, SelectAscan.port, (DGateType)tolMonitorIndex, ref dGateActive);
if (error_code != 0)
{
return;
}
if (gateActive == TMActive.ON && dGateActive == TMActive.ON)
{
MessageShow.show("Warn:Gate and double gate tolerance monitor are all active,need to select one to active!",
"警告：门容限误差和双门容限误差都打开，只能选择一种容限误差模式！");
}
else if (gateActive == TMActive.ON)
{
((CheckBox)(Controls.Find("check" + tolMonitorIndex + 1 + "ON", true)[0])).Checked = true;
((RadioButton)(Controls.Find("gate" + tolMonitorIndex + 1, true)[0])).Checked = true;
}
else if (dGateActive == TMActive.ON)
{
((CheckBox)(Controls.Find("check" + tolMonitorIndex + 1 + "ON", true)[0])).Checked = true;
((RadioButton)(Controls.Find("dGate" + tolMonitorIndex + 1, true)[0])).Enabled = true;
}
else
{
setControlsEnabled(tolMonitorIndex + 1, false);
}
}
}
private void checkBoxOn_Click(object sender, EventArgs e)
{
int error_code;
uint supressCount = 0;
if (checkBoxOn.Checked == true)
{
if (SetBatchDAQ.isOn)
{
error_code = SetBatchDAQ.ScActive(SelectAscan.sessionIndex, gateNum, SuppressCounterActive.ON);
}
else
{
error_code = SetGateDAQ.ScActive(SelectAscan.sessionIndex, SelectAscan.port, gateNum, SuppressCounterActive.ON);
}
error_code |= GetGateDAQ.ScCounter(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref supressCount);
if (SetBatchDAQ.isOn)
{
error_code = SetBatchDAQ.ScCounter(SelectAscan.sessionIndex, gateNum, supressCount);
}
if (error_code != 0)
{
checkBoxOn.Checked = false;
return;
}
numUpDownSupressCount.Enabled = true;
numUpDownSupressCount.Value = Convert.ToDecimal(supressCount);
}
else
{
error_code = SetGateDAQ.ScActive(SelectAscan.sessionIndex, SelectAscan.port, gateNum, SuppressCounterActive.OFF);
if (error_code != 0)
{
checkBoxOn.Checked = true;
return;
}
numUpDownSupressCount.Enabled = false;
}
}
private int initRadioButttonOfTofMode()
{
int error_code;
TofMode tofMode = TofMode.Peak;
error_code = GetGateDAQ.TofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref tofMode);
if (error_code != 0)
{
return(error_code);
}
switch (tofMode)
{
case TofMode.Peak:
radioButtonPeak.Checked = true;
preRdo = radioButtonPeak;
break;
case TofMode.Flank:
radioButtonFlank.Checked = true;
preRdo = radioButtonFlank;
break;
case TofMode.ZeroBefore:
radioButtonZeroB.Checked = true;
preRdo = radioButtonZeroB;
break;
case TofMode.ZeroAfter:
radioButtonZeroA.Checked = true;
preRdo = radioButtonZeroA;
break;
default:
error_code = -1;
MessageShow.show("Warn:Bind controls of tof mode failed!", "警告:绑定Tof mode的控件失败!");
break;
}
return(error_code);
}
private void CalTchartY_S(GateType selectedGate)
{
double delay = 0, width = 0;
int error_code;
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, selectedGate, ref delay);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, selectedGate, ref width);
if (error_code != 0)
{
MessageBox.Show("WARNING:gate data error");
lineRecord.Clear();;
return;
}
this.tChartA_y1 = delay - 1;
this.tChartA_y2 = delay + width + 2;
}
private int initCheckBoxOfSuppressCount()
{
int error_code;
SuppressCounterActive scActive = SuppressCounterActive.OFF;
error_code = GetGateDAQ.ScActive(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref scActive);
if (error_code != 0)
{
return(error_code);
}
if (scActive == SuppressCounterActive.ON)
{
checkBoxOn.Checked = true;
numUpDownSupressCount.Enabled = true;
error_code = initNumUpDownSupressCount();
}
else
{
checkBoxOn.Checked = false;
numUpDownSupressCount.Enabled = false;
}
return(error_code);
}
/**Get Gate DAQ*/
private static int getGate(uint ascanNum, uint ascanPort, GateType gateType, ref PGate param)
{
int error_code;
error_code = GetGateDAQ.Delay(ascanNum, ascanPort, gateType, ref param.Delay);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.Width(ascanNum, ascanPort, gateType, ref param.Width);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.Threshold(ascanNum, ascanPort, gateType, ref param.Threshold);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.IFActive(ascanNum, ascanPort, gateType, ref param.IF);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.TofMode(ascanNum, ascanPort, gateType, ref param.TofMode);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DnsActive(ascanNum, ascanPort, gateType, ref param.DnsActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DnsBw(ascanNum, ascanPort, gateType, ref param.DnsBw);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DnsStart(ascanNum, ascanPort, gateType, ref param.DnsStart);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DnsStep(ascanNum, ascanPort, gateType, ref param.DnsStep);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.AlarmLogic(ascanNum, ascanPort, gateType, ref param.AlarmLogic);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.ScActive(ascanNum, ascanPort, gateType, ref param.ScActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.ScCounter(ascanNum, ascanPort, gateType, ref param.ScCounter);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DtsActive(ascanNum, ascanPort, gateType, ref param.DtsActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DtsBand(ascanNum, ascanPort, gateType, ref param.DtsBand);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DtsStart(ascanNum, ascanPort, gateType, ref param.DtsStart);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.DtsStep(ascanNum, ascanPort, gateType, ref param.DtsStep);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.TolMonitorActive(ascanNum, ascanPort, gateType, ref param.TolMonitorActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.TolMonitorMax(ascanNum, ascanPort, gateType, ref param.TolMonitorMax);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.TolMonitorMin(ascanNum, ascanPort, gateType, ref param.TolMonitorMin);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.TolMonitorSc(ascanNum, ascanPort, gateType, ref param.TolMonitorSc);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.AlarmActive(ascanNum, ascanPort, gateType, ref param.AlarmActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.AlarmMode(ascanNum, ascanPort, gateType, ref param.AlarmMode);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.AlarmSignalLength(ascanNum, ascanPort, gateType, ref param.AlarmSignalLength);
if (error_code != 0)
{
return(error_code);
}
//error_code = SetGateDAQ.AlarmTimeLength(ascanNum, gateType, param.);
//if (error_code != 0)
// return error_code;
error_code = GetGateDAQ.AlarmActiveLevel(ascanNum, ascanPort, gateType, ref param.AlarmActiveLevel);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.MeasActive(ascanNum, ascanPort, gateType, ref param.MeasActive);
if (error_code != 0)
{
return(error_code);
}
error_code = GetGateDAQ.MeasMode(ascanNum, ascanPort, gateType, ref param.MeasMode);
if (error_code != 0)
{
return(error_code);
}
return(error_code);
}
//使得筛选的通道和当前显示通道所有参数变得一样
public static int Param(uint sessionIndex, uint selPort)
{
int error_code = 0;
bool isSetPre = false;
double delay = 0;
double range = 0;
double gain = 0;
uint envlopDecay = 0;
AscanWaveDectionMode waveMode = AscanWaveDectionMode.SemiPositve;
RecieverType type = RecieverType.Pc;
AscanEnvelopActive envelopActive = AscanEnvelopActive.OFF;
int gateTol = 4;
TofMode tofMode = TofMode.Flank;
TofMode[] tofModeArr = new TofMode[gateTol];
GateAlarmLogic[] gateAlarmLogic = new GateAlarmLogic[gateTol];
GateAlarmActive[] gateAlarmActive = new GateAlarmActive[gateTol];
double[] gateDelay = new double[gateTol];
double[] gateWidth = new double[gateTol];
double[] threshold = new double[gateTol];
SuppressCounterActive[] scActive = new SuppressCounterActive[gateTol];
uint[] scCount = new uint[gateTol];
IFActive ifActive = IFActive.OFF;
AscanIFActive ascanIfActive = AscanIFActive.OFF;
//取得当前通道的所有参数
error_code = GetAsacnVideoDAQ.Delay(sessionIndex, selPort, ref delay);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetRecieverDAQ.AnalogGain(sessionIndex, selPort, ref gain);
error_code |= GetAsacnVideoDAQ.EnvlopDecayFactor(sessionIndex, selPort, ref envlopDecay);
error_code |= GetAsacnVideoDAQ.DetectionWaveMode(sessionIndex, selPort, ref waveMode);
error_code |= GetPulserTransmitDAQ.RecieverMode(sessionIndex, selPort, ref type);
error_code |= GetAsacnVideoDAQ.EnvlopActive(sessionIndex, selPort, ref envelopActive);
error_code |= GetGateDAQ.IFActive(sessionIndex, selPort, GateType.I, ref ifActive);
error_code |= GetAsacnVideoDAQ.IFActive(sessionIndex, selPort, ref ascanIfActive);
for (int i = 0; i < gateTol; i++)
{
GateType gateIndex = (GateType)i;
error_code |= GetGateDAQ.TofMode(sessionIndex, selPort, gateIndex, ref tofModeArr[i]);
error_code |= GetGateDAQ.AlarmLogic(sessionIndex, selPort, gateIndex, ref gateAlarmLogic[i]);
error_code |= GetGateDAQ.AlarmActive(sessionIndex, selPort, gateIndex, ref gateAlarmActive[i]);
error_code |= GetGateDAQ.Delay(sessionIndex, selPort, gateIndex, ref gateDelay[i]);
error_code |= GetGateDAQ.Width(sessionIndex, selPort, gateIndex, ref gateWidth[i]);
error_code |= GetGateDAQ.Threshold(sessionIndex, selPort, gateIndex, ref threshold[i]);
error_code |= GetGateDAQ.ScActive(sessionIndex, selPort, gateIndex, ref scActive[i]);
error_code |= GetGateDAQ.ScCounter(sessionIndex, selPort, gateIndex, ref scCount[i]);
}
if (error_code != 0)
{
return(error_code);
}
//赋值
for (int i = 0; i < batchSessionsInfo.Count; i++)
{
uint port = (uint)batchSessionsInfo[i].port;
uint seIndex = (uint)batchSessionsInfo[i].sessionIndex;
//第二种情况||batchSessionsInfo[i].sessionIndex ！= sessionIndex
//if (batchSessionsInfo[i].sessionIndex == sessionIndex && port != selPort )//以selPort号为依据配置同一块板卡的其他虚拟通道的参数
{
error_code = SetAscanVideoDAQ.Delay(seIndex, port, delay);
error_code |= SetAscanVideoDAQ.Range(seIndex, port, range);
error_code |= SetReceiverDAQ.AnalogGain(seIndex, port, gain);
error_code |= SetAscanVideoDAQ.EnvlopDecayFactor(seIndex, port, envlopDecay);
isSetPre = SetAscanVideoDAQ.WaveMode(seIndex, port, waveMode);
error_code |= SetPulserTransmitDAQ.RecieverMode(seIndex, port, type);
error_code |= SetAscanVideoDAQ.EnvlopActive(seIndex, port, envelopActive);
for (int j = 0; j < gateTol; j++)
{
GateType gateIndex = (GateType)j;
isSetPre |= SetGateDAQ.setTofMode(seIndex, port, gateIndex, tofModeArr[j]);
error_code |= SetGateDAQ.AlarmLogic(seIndex, port, gateIndex, gateAlarmLogic[j]);
error_code |= SetGateDAQ.AlarmActive(seIndex, port, gateIndex, gateAlarmActive[j]);
error_code |= SetGateDAQ.Delay(seIndex, port, gateIndex, gateDelay[j]);
error_code |= SetGateDAQ.Width(seIndex, port, gateIndex, gateWidth[j]);
error_code |= SetGateDAQ.Threshold(seIndex, port, gateIndex, threshold[j]);
error_code |= SetGateDAQ.ScActive(seIndex, port, gateIndex, scActive[j]);
error_code |= SetGateDAQ.ScCounter(seIndex, port, gateIndex, scCount[j]);
if (error_code != 0)
{
return(error_code);
}
}
error_code |= GetGateDAQ.TofMode(seIndex, port, GateType.I, ref tofMode);
if (ifActive == IFActive.ON && ascanIfActive == AscanIFActive.ON)
{
if (tofMode != TofMode.Flank)
{
MessageShow.show("Warning:" + seIndex + port + "The TOF Mode GateI must select Flank mode!",
"警告：" + sessionIndex + port + "门模式门I未选择Flank模式!");
return(error_code = -1);
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.ON);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.ON);
}
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.OFF);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.OFF);
}
if (error_code != 0)
{
return(error_code);
}
}
}
return(error_code);
}
/*
* private void FormGatePosition_Paint(object sender, PaintEventArgs e)
* {
* e.Graphics.DrawLine(new Pen(SystemColors.GradientActiveCaption, 3), 1, 0, 1, this.Height);
* }
*/
private void checkBoxIF_Click(object sender, EventArgs e)
{
if ((int)gateNum == 0)
{
int error_code = 0;
TofMode tofMode = TofMode.Flank;
List <TofMode> list = new List <TofMode>();
list.Clear();
if (checkBoxIF.Checked)
{
if (SetBatchDAQ.isOn)
{
error_code = SetBatchDAQ.getTOfMode(SelectAscan.sessionIndex, GateType.I, list);
for (int i = 0; i < list.Count; i++)
{
if (list[i] != TofMode.Flank)
{
MessageShow.show("Warning:The TOF Mode GateI must select Flank mode!", "警告：门模式门I未选择Flank模式!");
checkBoxIF.Checked = false;
return;
}
}
error_code |= SetBatchDAQ.GateIFActive(SelectAscan.sessionIndex, GateType.I, IFActive.ON);
error_code |= SetBatchDAQ.AscanVideoIFActive(SelectAscan.sessionIndex, GateType.I, AscanIFActive.ON);
if (error_code != 0)
{
return;
}
}
else
{
error_code = GetGateDAQ.TofMode(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, ref tofMode);
if (tofMode != TofMode.Flank)
{
MessageShow.show("Warning:The TOF Mode GateI must select Flank mode!", "警告：门模式门I未选择Flank模式!");
checkBoxIF.Checked = false;
return;
}
error_code |= SetGateDAQ.iFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, IFActive.ON);
error_code |= SetAscanVideoDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, AscanIFActive.ON);
if (error_code != 0)
{
return;
}
}
}
else
{
if (SetBatchDAQ.isOn)
{
error_code = SetGateDAQ.iFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, IFActive.OFF);
error_code |= SetAscanVideoDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, AscanIFActive.OFF);
}
{
error_code = SetGateDAQ.iFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, IFActive.OFF);
error_code |= SetAscanVideoDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, AscanIFActive.OFF);
}
if (error_code != 0)
{
return;
}
FormList.MDIChild.drawGateIWhenIfStartDisabled();
}
}
if ((int)gateNum == 1)
{
MessageShow.show("Warning:The Gate must select GateI!", "警告：门模式未选择门I!");
checkBoxIF.Checked = false;
return;
}
if ((int)gateNum == 2)
{
MessageShow.show("Warning:The Gate must select GateI!", "警告：门模式未选择门I!");
checkBoxIF.Checked = false;
return;
}
if ((int)gateNum == 3)
{
MessageShow.show("Warning:The Gate must select GateI!", "警告：门模式未选择门I!");
checkBoxIF.Checked = false;
return;
}
}
/**Caculate tolMonitorMax and tolMonitorMin accordint to dGateType.
* @param gateType1 and gateType2 accord to dGateType.
* */
private void tolMonitorAccordToDGate(GateType gateType1, GateType gateType2, DGateType dGateType, int tolMonitorIndex)
{
int error_code;
GateType gateType;
double tolMonitorMax;
double tolMonitorMin;
int gate1 = 0;
int gate2 = 1;
double[] delay = new double[2] {
0, 0
}; //index=0,delay of gateType1;index=1,delay of gateType2
double[] width = new double[2] {
0, 0
};
double[] gateEnd = new double[2] {
0, 0
};
for (int i = 0; i < 2; i++)
{
if (i == 0)
{
gateType = gateType1;
}
else
{
gateType = gateType2;
}
error_code = GetGateDAQ.Delay(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref delay[i]);
if (error_code != 0)
{
return;
}
error_code = GetGateDAQ.Width(SelectAscan.sessionIndex, SelectAscan.port, gateType, ref width[i]);
if (error_code != 0)
{
return;
}
gateEnd[i] = delay[i] + width[i];
}
//caculate tolMonitorMax and tolMonitorMin
if (delay[gate1] > delay[gate2])
{
if (delay[gate1] > gateEnd[gate2])
{
tolMonitorMax = gateEnd[gate1] - delay[gate2];
tolMonitorMin = delay[gate1] - gateEnd[gate2];
}
else if (delay[gate1] <= gateEnd[gate2] && gateEnd[gate2] <= gateEnd[gate1])
{
tolMonitorMax = gateEnd[gate1] - delay[gate2];
tolMonitorMin = 0;
}
else
{
tolMonitorMax = gateEnd[gate2] - delay[gate2];
tolMonitorMin = 0;
}
}
else
{
if (delay[gate2] > gateEnd[gate1])
{
tolMonitorMax = gateEnd[gate2] - delay[gate1];
tolMonitorMin = delay[gate2] - gateEnd[gate1];
}
else if (delay[gate2] <= gateEnd[gate1] && gateEnd[gate1] <= gateEnd[gate2])
{
tolMonitorMax = gateEnd[gate2] - delay[gate1];
tolMonitorMin = 0;
}
else
{
tolMonitorMax = gateEnd[gate1] - delay[gate1];
tolMonitorMin = 0;
}
}
((NumericUpDown)(Controls.Find("numUpDownMax" + tolMonitorIndex, true)[0])).Text = tolMonitorMax.ToString();
((NumericUpDown)(Controls.Find("numUpDownMin" + tolMonitorIndex, true)[0])).Text = tolMonitorMin.ToString();
SetDGateDAQ.TolMonitorMax(SelectAscan.sessionIndex, SelectAscan.port, dGateType, tolMonitorMax);
SetDGateDAQ.TolMonitorMin(SelectAscan.sessionIndex, SelectAscan.port, dGateType, tolMonitorMin);
}
