protected void ConstructSRSection(INCCStyleSection sec, Multiplicity mu, Detector det)
{
// if this is based on a virtual SR then show it
if (det.Id.source.UsingVirtualSRCounting(det.Id.SRType))
{
sec.AddTwo(" Virtual shift register:", mu.ToString());
}
sec.AddTwo("Predelay:", mu.SR.predelayMS);
sec.AddTwo("Gate length:", mu.SR.gateLengthMS);
if (det.Id.SRType == InstrType.DGSR)
{
sec.AddTwo("Gate length2:", mu.SR.gateLengthMS);
}
sec.AddIntegerRow("High voltage:", (Int32)mu.SR.highVoltage);
sec.SetFPCurrentFormatPrecision(4);
sec.AddTwo("Die away time:", mu.SR.dieAwayTimeMS);
sec.AddTwo("Efficiency:", mu.SR.efficiency);
sec.AddTwo("Multiplicity deadtime:", mu.SR.deadTimeCoefficientMultiplicityinNanoSecs);
sec.AddTwo("Coefficient A deadtime:", mu.SR.deadTimeCoefficientAinMicroSecs);
sec.AddTwo("Coefficient B deadtime:", mu.SR.deadTimeCoefficientBinPicoSecs);
sec.AddTwo("Coefficient C deadtime:", mu.SR.deadTimeCoefficientCinNanoSecs);
sec.AddTwo("Doubles gate fraction:", mu.SR.doublesGateFraction);
sec.AddTwo("Triples gate fraction:", mu.SR.triplesGateFraction);
}
/// <summary>
/// Create parameter list for the results on a cycle
/// </summary>
/// <param name="mkey">The multiplicity parameters used to select the specific results. There can be more than one such results set per cycle.</param>
public void GenParamList(Multiplicity mkey)
{
GenParamList(); // ^ does the basic INCC5 and new LM cycle stuff
// now add the mkey stuff
Table = "cycles";
MultiplicityCountingRes pmcr = null;
QCTestStatus status = QCTestStatus.None;
if (CountingAnalysisResults.HasMultiplicity)
{
try
{
pmcr = (MultiplicityCountingRes)CountingAnalysisResults[mkey];
status = qcstatus[mkey].status;
}
catch (Exception) // mkey not found happens when a param is changed on a VSR that is not reflected back to the default [0] SR
{
logger?.TraceEvent(LogLevels.Warning, 7832, "Cycle status not set in DB, mkey mismatch: " + mkey.ToString());
}
}
if (pmcr == null)
{
pmcr = new MultiplicityCountingRes(); // null results
}
ps.Add(new DBParamEntry("scaler1", pmcr.Scaler1.v));
ps.Add(new DBParamEntry("scaler2", pmcr.Scaler2.v));
ps.Add(new DBParamEntry("reals_plus_acc", pmcr.RASum));
ps.Add(new DBParamEntry("acc", pmcr.ASum));
ps.Add(new DBParamEntry("mult_reals_plus_acc", pmcr.RAMult));
ps.Add(new DBParamEntry("mult_acc", pmcr.NormedAMult));
ps.Add(new DBParamEntry("scaler1_rate", pmcr.Scaler1Rate.v));
ps.Add(new DBParamEntry("scaler2_rate", pmcr.Scaler2Rate.v));
ps.Add(new DBParamEntry("doubles_rate", pmcr.RawDoublesRate.v));
ps.Add(new DBParamEntry("triples_rate", pmcr.RawTriplesRate.v));
ps.Add(new DBParamEntry("multiplicity_mult", pmcr.multiplication));
ps.Add(new DBParamEntry("multiplicity_alpha", pmcr.multiAlpha));
ps.Add(new DBParamEntry("multiplicity_efficiency", pmcr.efficiency));
ps.Add(new DBParamEntry("mass", pmcr.mass));
ps.Add(new DBParamEntry("status", (int)status));
{ // la super hack-a-whack
DB.DB db = new DB.DB(true);
if (db.TableHasColumn(Table, "mult_acc_un"))
{
ps.Add(new DBParamEntry("mult_acc_un", pmcr.UnAMult));
}
}
}
/// <summary>
/// create the results structures, including the methods map from (detector+multcounter) -> (detector+material) -> (results, method results)
/// </summary>
public void PrepareINCCResults()
{
IEnumerator iter = CountingAnalysisResults.GetATypedParameterEnumerator(typeof(AnalysisDefs.Multiplicity));
while (iter.MoveNext())
{
Multiplicity mcr = (Multiplicity)iter.Current;
try
{
logger.TraceEvent(NCCReporter.LogLevels.Verbose, 4028, "Preparing INCC {0} results for {1}", MeasOption.PrintName(), mcr.ToString());
INCCAnalysisState.PrepareINCCResults(MeasOption, mcr, (MultiplicityCountingRes)CountingAnalysisResults[mcr]);
logger.TraceEvent(NCCReporter.LogLevels.Verbose, 4029, "Preparing INCC method {0} results for {1}", INCCAnalysisState.Methods.selector.ToString(), mcr.ToString());
INCCAnalysisState.PrepareINCCMethodResults(mcr, new INCCSelector(INCCAnalysisState.Methods.selector), this);
}
catch (Exception ex)
{
logger.TraceEvent(NCCReporter.LogLevels.Error, 4027, "PrepareINCCResults error: " + ex.Message);
}
}
}
/// <summary>
/// create the results structures, including the methods map from (detector+multcounter) -> (detector+material) -> (results, method results)
/// </summary>
public void PrepareINCCResults()
{
IEnumerator iter = CountingAnalysisResults.GetATypedParameterEnumerator(typeof(Multiplicity));
while (iter.MoveNext())
{
bool existed = false;
Multiplicity mcr = (Multiplicity)iter.Current;
try
{
existed = INCCAnalysisState.PrepareINCCResults(MeasOption, mcr, (MultiplicityCountingRes)CountingAnalysisResults[mcr]);
if (!existed) // it was created just now in PrepareINCCResults
{
if (logger != null)
{
logger.TraceEvent(LogLevels.Verbose, 4028, "Preparing INCC {0} results for {1}", MeasOption.PrintName(), mcr.ToString());
}
}
existed = INCCAnalysisState.PrepareINCCMethodResults(mcr, new INCCSelector(INCCAnalysisState.Methods.selector), this);
if (!existed) // it was created just now in PrepareINCCMethodResults
{
if (logger != null)
{
logger.TraceEvent(LogLevels.Verbose, 4029, "Preparing INCC method {0} results for {1}", INCCAnalysisState.Methods.selector.ToString(), mcr.ToString());
}
}
}
catch (Exception ex)
{
if (logger != null)
{
logger.TraceEvent(LogLevels.Error, 4027, "PrepareINCCResults error: " + ex.Message);
}
}
}
}
/// <summary>
/// Create parameter list for the results on a cycle
/// </summary>
/// <param name="mkey">The multiplicity parameters used to select the specific results. There can be more than one such results set per cycle.</param>
public void GenParamList(Multiplicity mkey)
{
GenParamList(); // does the basic INCC5 and new LM cycle stuff
//now add the mkey stuff
Table = "cycles";
MultiplicityCountingRes pmcr = null;
QCTestStatus status = QCTestStatus.None;
if (CountingAnalysisResults.HasMultiplicity)
{
try
{
pmcr = (MultiplicityCountingRes)CountingAnalysisResults[mkey];
status = qcstatus[mkey].status;
}
catch (Exception) // mkey not found happens when a param is changed on a VSR that is not reflected back to the default [0] SR
{
logger.TraceEvent(NCCReporter.LogLevels.Warning, 7832, "Status not set due to mkey issue: " + mkey.ToString());
}
}
if (pmcr == null)
{
pmcr = new MultiplicityCountingRes(); // null results
}
ps.Add(new DBParamEntry("scaler1", pmcr.Scaler1.v));
ps.Add(new DBParamEntry("scaler2", pmcr.Scaler2.v));
ps.Add(new DBParamEntry("reals_plus_acc", pmcr.RASum));
ps.Add(new DBParamEntry("acc", pmcr.ASum));
ps.Add(new DBParamEntry("mult_reals_plus_acc", pmcr.RAMult));
ps.Add(new DBParamEntry("mult_acc", pmcr.NormedAMult));
ps.Add(new DBParamEntry("scaler1_rate", pmcr.Scaler1Rate.v));
ps.Add(new DBParamEntry("scaler2_rate", pmcr.Scaler2Rate.v));
ps.Add(new DBParamEntry("doubles_rate", pmcr.RawDoublesRate.v));
ps.Add(new DBParamEntry("triples_rate", pmcr.RawTriplesRate.v));
ps.Add(new DBParamEntry("multiplicity_mult", pmcr.multiplication));
ps.Add(new DBParamEntry("multiplicity_alpha", pmcr.multiAlpha));
ps.Add(new DBParamEntry("multiplicity_efficiency", pmcr.efficiency));
ps.Add(new DBParamEntry("mass", pmcr.mass));
ps.Add(new DBParamEntry("status", (Int32)status));
}