public bool CloseandOpenAPC(byte mode)
{
bool isOK = false;
if (GlobalParameters.APCType == Convert.ToByte(apctype.none))
{
Log.SaveLogToTxt("no apc");
return(true);
}
try
{
switch (mode)
{
case (byte)APCMODE.IBAISandIMODON:
{
Log.SaveLogToTxt("Open apc");
isOK = dut.APCON(0x11);
// isOK = dut.APCON(0x00);
Log.SaveLogToTxt("Open apc" + isOK.ToString());
break;
}
case (byte)APCMODE.IBAISandIMODOFF:
{
Log.SaveLogToTxt(" Close apc");
isOK = dut.APCOFF(0x11);
Log.SaveLogToTxt("Close apc" + isOK.ToString());
}
break;
case (byte)APCMODE.IBIASONandIMODOFF:
{
Log.SaveLogToTxt(" Close IModAPCand Open IBiasAPC");
isOK = dut.APCON(0x01);
Log.SaveLogToTxt("Close IModAPCand Open IBiasAPC" + isOK.ToString());
break;
}
case (byte)APCMODE.IBIASOFFandIMODON:
{
Log.SaveLogToTxt(" Close IBiasAPCand Open IModAPC");
isOK = dut.APCON(0x10);
Log.SaveLogToTxt("Close IBiasAPCand Open IModAPC" + isOK.ToString());
break;
}
default:
{
break;
}
}
return(isOK);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
}
}
protected override bool AnalysisInputParameters(TestModeEquipmentParameters[] InformationList)
{
Log.SaveLogToTxt("Step1...Check InputParameters");
try
{
if (InformationList.Length < inPutParametersNameArray.Count)
{
Log.SaveLogToTxt("InputParameters are not enough!");
return(false);
}
else
{
int index = -1;
bool isParametersComplete = true;
if (isParametersComplete)
{
//for (byte i = 0; i < InformationList.Length; i++)
{
if (Algorithm.FindFileName(InformationList, "RxInputPower", out index))
{
adjustAPDStruct.RxInputPower = Convert.ToDouble(InformationList[index].DefaultValue);
}
if (Algorithm.FindFileName(InformationList, "SETPOINTS", out index))
{
char[] tempCharArray = new char[] { ',' };
ArrayList tempAL = Algorithm.StringtoArraylistDeletePunctuations(InformationList[index].DefaultValue, tempCharArray);
if (tempAL == null)
{
Log.SaveLogToTxt(InformationList[index].FiledName + "is null");
return(false);
}
else
{
adjustAPDStruct.SetPoints = new Int32[tempAL.Count];
for (int i = 0; i < tempAL.Count; i++)
{
adjustAPDStruct.SetPoints[i] = Int32.Parse(tempAL[i].ToString());
}
}
}
if (Algorithm.FindFileName(InformationList, "ScanCount", out index))
{
adjustAPDStruct.ScanCount = Convert.ToByte(InformationList[index].DefaultValue);
}
if (Algorithm.FindFileName(InformationList, "Formula_X_Type", out index))
{
adjustAPDStruct.Formula_X_Type = Convert.ToByte(InformationList[index].DefaultValue);
}
}
}
Log.SaveLogToTxt("OK!");
return(true);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02001, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02001, error.StackTrace);
}
}
public override bool Test()
{
try
{
ppg.ConfigurePatternType(2);
ppg.DataPattern_DataLength(myStruct.Length.ToString());
ppg.DataPattern_SetPatternData("#H0", "#H" + (myStruct.Length - 1), "B" + myStruct.Data.ToString());
scope.SetMode(1);
count++;
DialogResult dialogResult;
if (count == 1)
{
dialogResult = MessageBox.Show("Please unplug and plug DUT", "Infomation", MessageBoxButtons.OK);
if (dialogResult != DialogResult.OK)
{
return(false);
}
}
//scope.MyIO.WriteString(":TIMebase:PTImebase:STATe OFF");
//scope.MyIO.WriteString(":TRIGger:SOURce FPANel");
//scope.MyIO.WriteString(":TRIGger:PLOCK ON");
//scope.MyIO.WriteString("*OPC?");
scope.PtimebaseStatue(false);
scope.TriggerSourceFpanel();
scope.TriggerPlock(true);
Thread.Sleep(50);
scope.AutoScale();
// scope.setcommand(":TIMebase:PTImebase:STATe OFF");
dialogResult = MessageBox.Show("Begin to test polarity?", "Infomation", MessageBoxButtons.YesNo);
if (dialogResult == DialogResult.Yes)
{
scope.pglobalParameters = GlobalParameters;
txPolarity = TestTxPolarity();
rxPolarity = TestRxPolarity();
}
else
{
return(false);
}
if ((txPolarity <= mySpec.TxPolaritySpecMax && txPolarity >= mySpec.TxPolaritySpecMin) &&
(rxPolarity <= mySpec.RxPolaritySpecMax && rxPolarity >= mySpec.RxPolaritySpecMin))
{
return(true);
}
else
{
return(false);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
}
}
protected byte SearchMaskPoint(Int32[] ScanArray, out double[] Item)
{
Item = new double[ScanArray.Length];
try
{
ArrayList StrLog = new ArrayList();
for (int i = 0; i < ScanArray.Length; i++)
{
dut.WriteMaskDac(ScanArray[i]);
Thread.Sleep(200);
Item[i] = GetMask();
StrLog.Add("ScanArray[" + i + "] =" + ScanArray[i].ToString() + " " + "Mask[" + i + "] =" + Item[i].ToString());
}
for (int i = 0; i < StrLog.Count; i++)
{
Log.SaveLogToTxt(StrLog[i].ToString());
}
byte bIndex;
ArrayList TempArray = new ArrayList();
TempArray.Clear();
for (int i = 0; i < ScanArray.Length; i++)
{
TempArray.Add(Item[i]);
}
Algorithm.SelectMinValue(TempArray, out bIndex);
Log.SaveLogToTxt("ScanMaskDAC =" + ScanArray[bIndex].ToString());
Log.SaveLogToTxt("ScanMask =" + Item[bIndex].ToString());
//Log.SaveLogToTxt("ErrorRate[" + bIndex + "] =" + TempValue);
return(bIndex);
}
catch (InnoExCeption ex) //from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(0);
}
catch (Exception error) //from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(0);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
}
public override bool SelectEquipment(EquipmentList aEquipList)
{
selectedEquipList.Clear();
try
{
if (aEquipList.Count == 0)
{
return(false);
}
else
{
bool isOK = false;
selectedEquipList.Clear();
IList <string> tempKeys = aEquipList.Keys;
IList <EquipmentBase> tempValues = aEquipList.Values;
for (byte i = 0; i < aEquipList.Count; i++)
{
if (tempKeys[i].ToUpper().Contains("POWERSUPPLY"))
{
selectedEquipList.Add("POWERSUPPLY", tempValues[i]);
isOK = true;
}
}
tempps = (Powersupply)selectedEquipList["POWERSUPPLY"];
if (tempps != null)
{
isOK = true;
}
else
{
if (tempps == null)
{
Log.SaveLogToTxt("POWERSUPPLY =NULL");
}
isOK = false;
OutPutandFlushLog();
isOK = false;
}
if (isOK)
{
selectedEquipList.Add("DUT", dut);
return(isOK);
}
return(isOK);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02F00, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02F00, error.StackTrace);
}
}
protected bool OpticalTest()
{
lock (tempScope)
{
try
{
bool flagMask = false;
apDBM = InnoExCeption.NaN;
er = InnoExCeption.NaN;
crossing = InnoExCeption.NaN;
marginVaulue = InnoExCeption.NaN;
jitterRMS = InnoExCeption.NaN;
jitterPP = InnoExCeption.NaN;
OEOMA = InnoExCeption.NaN;
OEOMADBM = InnoExCeption.NaN;
riseTime = InnoExCeption.NaN;
fallTime = InnoExCeption.NaN;
EyeHeight = InnoExCeption.NaN;
bitRate = InnoExCeption.NaN;
XmarginVaulue2 = InnoExCeption.NaN;
//throw new InnoExCeption(ExceptionDictionary.Code._0x02000, "abc");
//int ni = 0;
//int nj = 5 / ni;
//Scope tempScope = (Scope)selectedEquipList["SCOPE"];
if (tempScope != null)
{
tempScope.pglobalParameters = GlobalParameters;
double[] tempDoubleArray;
//for (int K = 0; K < 4;K++ )
//{
if (!tempScope.OpticalEyeTest(out tempDoubleArray, 1))
{
for (byte i = 0; i < tempDoubleArray.Length; i++)
{
tempDoubleArray[i] = InnoExCeption.NaN;
}
}
if (tempDoubleArray[8] > MaskSpecMax || tempDoubleArray[8] < MaskSpecMin)
{
flagMask = false;
}
else
{
flagMask = true;
}
if (!flagMask)//后三次测试有一次失败就不在测试
{
for (int k = 0; k < 3; k++)
{
if (!tempScope.OpticalEyeTest(out tempDoubleArray))
{
for (byte i = 0; i < tempDoubleArray.Length; i++)
{
tempDoubleArray[i] = InnoExCeption.NaN;
}
}
if (tempDoubleArray[8] > MaskSpecMax || tempDoubleArray[8] < MaskSpecMin)
{
break;
}
}
}
OEOMA = tempDoubleArray[2];
OEOMADBM = Algorithm.ChangeUwtoDbm(OEOMA * 1000);
jitterRMS = tempDoubleArray[5];
jitterPP = tempDoubleArray[4];
riseTime = tempDoubleArray[6];
fallTime = tempDoubleArray[7];
crossing = tempDoubleArray[3];
er = tempDoubleArray[1];
apDBM = tempDoubleArray[0];
marginVaulue = tempDoubleArray[8];
EyeHeight = tempDoubleArray[9];
bitRate = tempDoubleArray[10];
XmarginVaulue2 = tempDoubleArray[11];
// EyeWidth = tempDoubleArray[10];
Log.SaveLogToTxt("apDBM:" + apDBM.ToString());
Log.SaveLogToTxt("er:" + er.ToString());
Log.SaveLogToTxt("crossing:" + crossing.ToString());
Log.SaveLogToTxt("maskVaulue:" + marginVaulue.ToString());
Log.SaveLogToTxt("jitterRMS:" + jitterRMS.ToString());
Log.SaveLogToTxt("jitterPP:" + jitterPP.ToString());
Log.SaveLogToTxt("OEOMA:" + OEOMA.ToString());
Log.SaveLogToTxt("OEOMADBM:" + OEOMADBM.ToString());
Log.SaveLogToTxt("riseTime:" + riseTime.ToString());
Log.SaveLogToTxt("fallTime:" + fallTime.ToString());
Log.SaveLogToTxt("bitRate:" + bitRate.ToString());
Log.SaveLogToTxt("maskVaulue2:" + XmarginVaulue2.ToString());
return(true);
}
else
{
Log.SaveLogToTxt("Equipments are not enough!");
return(false);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
}
}
}
protected bool SetTxBiasAdcOffset()
{
try
{
if (biasADCs == null)
{
biasADCs = new ushort[GlobalParameters.TotalChCount];
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
dut.ChangeChannel((i + 1).ToString());
dut.SetSoftTxDis();
Thread.Sleep(20);
}
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
dut.ChangeChannel((i + 1).ToString());
dut.ReadBiasADC(out biasADCs[i]);
Log.SaveLogToTxt("biasADC of this channel is " + biasADCs[i]);
if (biasADCs[dut.MoudleChannel - 1] == 65535)
{
Log.SaveLogToTxt("biasADC of this channel is 65535.");
return(false);
}
}
dut.TxAllChannelEnable();
//return to current channel
dut.ChangeChannel(GlobalParameters.CurrentChannel.ToString());
int sum = 0;
for (int i = 0; i < biasADCs.Length; i++)
{
sum += biasADCs[i];
}
ushort avg = (ushort)(sum / biasADCs.Length);
dut.SetBiasAdcOffset(avg);
Log.SaveLogToTxt("completed to set biasAdcOffset to " + avg);
ushort returndata = 0;
dut.ReadBiasAdcOffset(out returndata);
result = (avg == returndata) ? true : false;
return(result);
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
}
}
protected bool CurveAPDandWriteCoefs()
{
try
{
#region CurveCoef
string SelectCondition = "Channel=" + GlobalParameters.CurrentChannel;
DataRow[] drArray = dtProcess.Select(SelectCondition);
if (drArray.Length >= 2)
{
double[] Y = new double[drArray.Length];
double[] X = new double[drArray.Length];
for (byte i = 0; i < drArray.Length; i++)
{
Y[i] = double.Parse(drArray[i]["APDDAC"].ToString());
X[i] = double.Parse(drArray[i]["Formula_X"].ToString()); //Formula_X
}
for (int i = 0; i < X.Length; i++)
{
Log.SaveLogToTxt("X[" + i.ToString() + "]=" + X[i].ToString() + " " + "Y[" + i.ToString() + "]=" + Y[i].ToString());
}
double[] coefArray = Algorithm.MultiLine(X, Y, tempratureADCArray.Count, 2);
// double[] coefArray = Algorithm.MultiLine(tempTempAdcArray, tempAPDDacArray, tempratureADCArray.Count, 2);
apdPowerCoefC = (float)coefArray[0];
apdPowerCoefB = (float)coefArray[1];
apdPowerCoefA = (float)coefArray[2];
apdCoefArray = ArrayList.Adapter(coefArray);
apdCoefArray.Reverse();
for (byte i = 0; i < apdCoefArray.Count; i++)
{
Log.SaveLogToTxt("apdCoefArray[" + i.ToString() + "]=" + apdCoefArray[i].ToString() + " " + Algorithm.ByteArraytoString(2, ",", Algorithm.FloatToIEE754(apdCoefArray[i])));
}
Log.SaveLogToTxt("Step9...WriteCoef");
#region W&R Apddaccoefc
isWriteCoefCOk = dut.SetAPDdaccoefc(apdPowerCoefC.ToString());
if (isWriteCoefCOk)
{
Log.SaveLogToTxt("isWriteCoefCOk:" + isWriteCoefCOk.ToString());
}
else
{
Log.SaveLogToTxt("isWriteCoefCOk:" + isWriteCoefCOk.ToString());
}
#endregion
#region W&R Apddaccoefb
isWriteCoefBOk = dut.SetAPDdaccoefb(apdPowerCoefB.ToString());
if (isWriteCoefBOk)
{
Log.SaveLogToTxt("isWriteCoefBOk:" + isWriteCoefBOk.ToString());
}
else
{
Log.SaveLogToTxt("isWriteCoefBOk:" + isWriteCoefBOk.ToString());
}
#endregion
#region W&R Apddaccoefa
isWriteCoefAOk = dut.SetAPDdaccoefa(apdPowerCoefA.ToString());
if (isWriteCoefAOk)
{
Log.SaveLogToTxt("isWriteCoefAOk:" + isWriteCoefAOk.ToString());
}
else
{
Log.SaveLogToTxt("isWriteCoefAOk:" + isWriteCoefAOk.ToString());
}
#endregion
if (isWriteCoefAOk & isWriteCoefBOk & isWriteCoefCOk)
{
Log.SaveLogToTxt("isCalApdPowerOk:" + true.ToString());
}
else
{
Log.SaveLogToTxt("isCalApdPowerOk:" + false.ToString());
return(false);
}
}
#endregion
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
}
}
private bool CalculateAndWriteCoeff()
{
try
{
bool result = true;
//减offset
double[,] matrixX = new double[matrixEachEnADC.GetLength(0), matrixEachEnADC.GetLength(1)];
for (int i = 0; i < matrixEachEnADC.GetLength(0); i++)
{
string info = "";
for (int j = 0; j < matrixEachEnADC.GetLength(1); j++)
{
info += matrixEachEnADC[i, j].ToString("f1") + " ";
matrixX[i, j] = matrixEachEnADC[i, j] - matrixOffsetADC[i];
}
//log matrixSingleEnable and offset
Log.SaveLogToTxt("matrixSingleEnable: " + info + "matrixOffset: " + matrixOffsetADC[i]);
}
//计算系数
double[,] coeff = Algorithm.CalculateCoeff(matrixX, 0);
//log and write coeff to DUT
result = dut.WriterTxAdcCalibrateMatrix(coeff);
for (int i = 0; i < coeff.GetLength(0); i++)
{
string info = "";
for (int j = 0; j < coeff.GetLength(1); j++)
{
info += coeff[i, j].ToString("f4") + " ";
}
Log.SaveLogToTxt("coeff: " + info);
}
Log.SaveLogToTxt("Write coeff to dut sucessfully");
//write offset to DUT;
for (int i = 0; i < matrixOffsetADC.GetLength(0); i++)
{
dut.ChangeChannel((i + 1).ToString());
result = result && dut.WriterTxAdcBacklightOffset(matrixOffsetADC[i]);
}
Log.SaveLogToTxt("Write offset to dut sucessfully");
return(result);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
}
finally
{
dut.ChangeChannel(GlobalParameters.CurrentChannel.ToString());
}
}
protected bool CurveTempDmiandWriteCoefs()
{
try
{
int tempCount = 0;
if (GlobalParameters.TotalTempCount <= 0)
{
tempCount = Math.Min(tempratureADCArray.Count / 1, realTempratureArray.Count / 1);
}
else
{
tempCount = Math.Min(tempratureADCArray.Count / GlobalParameters.TotalTempCount, realTempratureArray.Count / GlobalParameters.TotalTempCount);
}
double[,] tempTempAdcArray;
double[,] tempTempValueArray;
if (GlobalParameters.TotalTempCount <= 0)
{
tempTempAdcArray = new double[1, tempCount];
tempTempValueArray = new double[1, tempCount];
}
else
{
tempTempAdcArray = new double[GlobalParameters.TotalTempCount, tempCount];
tempTempValueArray = new double[GlobalParameters.TotalTempCount, tempCount];
}
byte totalTempCount;
if (GlobalParameters.TotalTempCount <= 0)
{
totalTempCount = 1;
}
else
{
totalTempCount = GlobalParameters.TotalTempCount;
}
Log.SaveLogToTxt("Step4...Start Fitting Curve");
{
for (byte i = 0; i < totalTempCount; i++)
{
int tempcount1 = 0;
for (byte j = 0; j < Math.Min(realTempratureArray.Count, tempratureADCArray.Count); j++)
{
int tempstr2 = tempratureADCArray.Keys[j].ToUpper().Length;
string tempstring = tempratureADCArray.Keys[j].ToUpper().Substring(tempratureADCArray.Keys[j].ToUpper().Length - 1, 1);
string iStr = i.ToString().ToUpper().Trim();
if (tempstring == iStr)
{
tempTempAdcArray[i, tempcount1] = double.Parse(tempratureADCArray.Values[j]);
tempTempValueArray[i, tempcount1] = double.Parse(realTempratureArray.Values[j]);
tempcount1++;
}
}
}
for (byte i = 0; i < totalTempCount; i++)
{
for (byte j = 0; j < tempCount; j++)
{
tempTempValueArray[i, j] = tempTempValueArray[i, j] * 256;
}
}
double[] adcArray = new double[tempCount];
double[] realArray = new double[tempCount];
{
for (byte i = 0; i < totalTempCount; i++)
{
for (byte j = 0; j < tempCount; j++)
{
adcArray[j] = tempTempAdcArray[i, j];
realArray[j] = tempTempValueArray[i, j];
}
for (byte k = 0; k < adcArray.Length; k++)
{
Log.SaveLogToTxt("adcArray[" + k.ToString() + "]=" + adcArray[k].ToString() + " " + "realArray[" + k.ToString() + "]=" + realArray[k].ToString());
}
double[] coefArray = Algorithm.MultiLine(adcArray, realArray, tempCount, 1);
tempDmiCoefC = Convert.ToSingle(coefArray[0]);
tempDmiCoefB = Convert.ToSingle(coefArray[1]);
tempDmiCoefArray = ArrayList.Adapter(coefArray);
tempDmiCoefArray.Reverse();
for (byte k = 0; k < tempDmiCoefArray.Count; k++)
{
// Log.SaveLogToTxt("tempDmiCoefArray[" + k.ToString() + "]=" + tempDmiCoefArray[k].ToString() + " " + Algorithm.ByteArraytoString(2, ",", Algorithm.INT16To2Bytes(tempDmiCoefArray[k])));
Log.SaveLogToTxt("tempDmiCoefArray[" + k.ToString() + "]=" + tempDmiCoefArray[k].ToString() + " " + Algorithm.ByteArraytoString(4, ",", Algorithm.FloatToIEE754(tempDmiCoefArray[k])));
}
Log.SaveLogToTxt("Step5...WriteCoef");
#region W&R Tempcoefc
isWriteCoefCOk = dut.SetTempcoefc(tempDmiCoefC.ToString(), (byte)(i + 1));
if (isWriteCoefCOk)
{
Log.SaveLogToTxt("WritetempDmiCoefC:" + isWriteCoefCOk.ToString());
}
else
{
Log.SaveLogToTxt("WritetempDmiCoefC:" + isWriteCoefCOk.ToString());
}
#endregion
#region W&R Tempcoefb
isWriteCoefBOk = dut.SetTempcoefb(tempDmiCoefB.ToString(), (byte)(i + 1));
if (isWriteCoefBOk)
{
Log.SaveLogToTxt("WritetempDmiCoefB:" + isWriteCoefBOk.ToString());
}
else
{
Log.SaveLogToTxt("WritetempDmiCoefB:" + isWriteCoefBOk.ToString());
}
#endregion
if (isWriteCoefBOk & isWriteCoefCOk)
{
Log.SaveLogToTxt("isCalTempDmiOk:" + true.ToString());
}
else
{
Log.SaveLogToTxt("isCalTempDmiOk:" + false.ToString());
return(false);
}
}
}
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
}
}
private bool ReadTotalChADC(string info, int channel, out double[] dataADC)
{
dataADC = new double[GlobalParameters.TotalChCount];
string time = DateTime.Now.ToString();
try
{
Log.SaveLogToTxt("Try to Clean offset/coeff.");
if (!this.CleanCoeff())
{
Log.SaveLogToTxt("Failed to Clean offset/coeff.");
return(false);
}
Log.SaveLogToTxt("Clean offset/coeff sucessfully.");
if (channel == 0)
{
Log.SaveLogToTxt("Disable all channel");
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
dut.ChangeChannel((i + 1).ToString());
dut.SetSoftTxDis();
}
}
else
{
Log.SaveLogToTxt("Enable channel " + channel + "and Write bias/mod DAC");
dut.SetSingleChannelTxEnable((byte)channel);
dut.WriteBiasDac(myStruct.BiasDACs[channel - 1]);
dut.WriteModDac(myStruct.ModDACs[channel - 1]);
}
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
dut.ChangeChannel((i + 1).ToString());
ushort data;
if (dut.ReadTxpADC(out data))
{
dataADC[i] = data;
}
else
{
Log.SaveLogToTxt("failed to read TxADC of channel" + (i + 1));
return(false);
}
DataRow dr = dt.NewRow();
dr[1] = time;
dr[2] = GlobalParameters.CurrentTemp;
dr[3] = dut.MoudleChannel;
dr[4] = dataADC[i];
dr[5] = info;
dt.Rows.Add(dr);
string readInfo = time + " " + GlobalParameters.CurrentTemp + " " + dut.MoudleChannel + " " + dataADC[i].ToString("f1") + " " + info;
Log.SaveLogToTxt("read info: " + readInfo);
dr = null;
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0xFFFFF, error.StackTrace);
}
finally
{
dut.ChangeChannel(GlobalParameters.CurrentChannel.ToString());
}
}
protected override bool AnalysisInputParameters(TestModeEquipmentParameters[] infoList)
{
try
{
ArrayList inParaList = new ArrayList();
inParaList.Clear();
inParaList.Add("BiasDACArray");
inParaList.Add("ModDACArray");
inParaList.Add("AdjustMethod");
Log.SaveLogToTxt("Step1...Check InputParameters");
if (infoList.Length < inParaList.Count)
{
Log.SaveLogToTxt("InputParameters are not enough!");
return(false);
}
else
{
int index = -1;
bool isParaCompleted = true;
if (isParaCompleted)
{
if (Algorithm.FindFileName(infoList, "BIASDACARRAY", out index))
{
char[] tempCharArray = new char[] { ',' };
ArrayList tempAR = Algorithm.StringtoArraylistDeletePunctuations(infoList[index].DefaultValue, tempCharArray);
if (tempAR == null)
{
Log.SaveLogToTxt(infoList[index].FiledName + "is null!");
return(false);
}
else if (tempAR.Count > GlobalParameters.TotalChCount)
{
myStruct.BiasDACs = new ArrayList();
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
myStruct.BiasDACs.Add(tempAR[i]);
}
}
else
{
myStruct.BiasDACs = tempAR;
}
}
if (Algorithm.FindFileName(infoList, "MODDACARRAY", out index))
{
char[] tempCharArray = new char[] { ',' };
ArrayList tempAR = Algorithm.StringtoArraylistDeletePunctuations(infoList[index].DefaultValue, tempCharArray);
if (tempAR == null)
{
Log.SaveLogToTxt(infoList[index].FiledName + "is null!");
return(false);
}
else if (tempAR.Count > GlobalParameters.TotalChCount)
{
myStruct.ModDACs = new ArrayList();
for (int i = 0; i < GlobalParameters.TotalChCount; i++)
{
myStruct.ModDACs.Add(tempAR[i]);
}
}
else
{
myStruct.ModDACs = tempAR;
}
}
if (Algorithm.FindFileName(infoList, "ADJUSTMETHOD", out index))
{
double temp = Convert.ToDouble(infoList[index].DefaultValue);
if (double.IsInfinity(temp) || double.IsNaN(temp))
{
Log.SaveLogToTxt(infoList[index].FiledName + "is wrong!");
return(false);
}
else
{
myStruct.MethodID = Convert.ToByte(temp);
}
}
Log.SaveLogToTxt("OK!");
return(true);
}
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02001, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02001, error.StackTrace);
}
}
protected override bool AnalysisOutputParameters(TestModeEquipmentParameters[] InformationList)
{
try
{
int ArrayLength = 1;
if (flagReadTxpowerDmi)
{
ArrayLength += 1;
}
if (flagReadRxpowerDmi)
{
ArrayLength += 1;
}
outputParameters = new TestModeEquipmentParameters[ArrayLength];
outputParameters[0].FiledName = "Tr_ErrorRate(%)";
Ber = Algorithm.ISNaNorIfinity(Ber);
outputParameters[0].DefaultValue = Ber.ToString().Trim();
if (flagReadRxpowerDmi)
{
DmiRxPower = Algorithm.ISNaNorIfinity(DmiRxPower);
outputParameters[1].DefaultValue = DmiRxPower.ToString().Trim();
outputParameters[1].FiledName = "DmiRxPower";
}
if (flagReadTxpowerDmi)
{
if (flagReadRxpowerDmi)
{
outputParameters[2].FiledName = "DmiTxPower";
DmiTxPower = Algorithm.ISNaNorIfinity(DmiTxPower);
outputParameters[2].DefaultValue = DmiTxPower.ToString().Trim();
}
else
{
outputParameters[1].FiledName = "DmiTxPower";
DmiTxPower = Algorithm.ISNaNorIfinity(DmiTxPower);
outputParameters[1].DefaultValue = DmiTxPower.ToString().Trim();
}
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
}
}
protected bool SearchTargetPoint(out byte Index)
{
Index = 0;
ArrayList serchAttPointsTemp = new ArrayList();
serchAttPointsTemp.Clear();
ArrayList serchAttPoints = serchAttPointsTemp;
ArrayList serchBerPoints = serchAttPointsTemp;
try
{
//double currentCense = 0;
//byte count = 0;
serchAttPoints = new ArrayList();
serchBerPoints = new ArrayList();
serchAttPoints.Clear();
serchBerPoints.Clear();
ArrayList StrLog = new ArrayList();
ushort[] rxADCs = new ushort[adjustAPDStruct.SetPoints.Length];
int count = 0;
for (int i = 0; i < adjustAPDStruct.SetPoints.Length; i++)
{
dut.WriteAPDDac(adjustAPDStruct.SetPoints[i]);
serchAttPoints.Add(adjustAPDStruct.SetPoints[i]);
Thread.Sleep(200);
double TempValue = pED.GetErrorRate();
if (Math.Abs(TempValue - 9.999E+17) < 1.0E-6)
{
count++;//记录误码不通的数量
}
serchBerPoints.Add(TempValue);
dut.ReadRxpADC(out rxADCs[i]);
StrLog.Add("adjustAPDStruct.SetPoints[" + i + "] = " + adjustAPDStruct.SetPoints[i].ToString() + " " + " serchBerPoints[" + i + "] = " + TempValue + " RxADC[" + i + "] = " + rxADCs[i]);
}
for (int i = 0; i < StrLog.Count; i++)
{
Log.SaveLogToTxt(StrLog[i].ToString());
}
if (count == adjustAPDStruct.SetPoints.Length)//如果全部不通
{
return(false);
}
// byte Index;
Algorithm.SelectMinValue(serchBerPoints, out Index);
if (referenceRxADC_First == null)
{
referenceRxADC_First = new ushort[GlobalParameters.TotalChCount];
referenceTemp = GlobalParameters.CurrentTemp;
}
if (referenceTemp == GlobalParameters.CurrentTemp)
{
referenceRxADC_First[GlobalParameters.CurrentChannel - 1] = rxADCs[Index];
return(true);
}
ushort deltaRxADC = 65535;
int index = Index;
for (int i = 0; i < serchBerPoints.Count; i++)
{
if (Math.Abs(Convert.ToDouble(serchBerPoints[i]) - Convert.ToDouble(serchBerPoints[Index])) < 10 * Convert.ToDouble(serchBerPoints[Index]))
{
int delta = Math.Abs(rxADCs[i] - referenceRxADC_First[GlobalParameters.CurrentChannel - 1]);
if (delta < deltaRxADC)
{
deltaRxADC = (ushort)delta;
index = i;
}
}
}
Log.SaveLogToTxt("BestAPD = " + adjustAPDStruct.SetPoints[index] + " serchBerPoints = " + serchBerPoints[index] + " RxADC = " + rxADCs[index]);
Index = (byte)index;
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
}
private bool AdjustMethodByBinarySearch()
{
bool result = false;
double value, rang, targetValue, targetMin, targetMax;
rang = 2.0;
targetValue = mySpec.TypcalValue;
targetMin = targetValue - rang;
targetMax = targetValue + rang;
try
{
Int32 startDAC = myStruct.DACStart;
dut.WriteCrossDac(startDAC);
scope.AutoScale();
Thread.Sleep(3000);
value = GetCrossing();
if (value <= targetMax && value >= targetMin)
{
Log.SaveLogToTxt("value is " + value);
dut.StoreCrossDac(startDAC);
outDAC = myStruct.DACStart;
outCrossing = value;
return(true);
}
else
{
int i = 0;
logList.Clear();
int max = myStruct.DACMax;
int min = myStruct.DACMin;
while (!result && min < max)
{
if (startDAC > myStruct.DACMax || startDAC < myStruct.DACMin || i > 20)
{
break;
}
startDAC = min + (max - min) / 2;
dut.WriteCrossDac(startDAC);
scope.ClearDisplay();
Thread.Sleep(2000);
value = GetCrossing();
logList.Add("DAC=" + startDAC + " Crossing=" + value);
if (value < targetMin)
{
min = startDAC;
}
else if (value > targetMax)
{
max = startDAC;
}
else
{
dut.StoreCrossDac(startDAC);
result = true;
break;
}
}
}
for (int i = 0; i < logList.Count; i++)
{
Log.SaveLogToTxt(logList[i].ToString());
}
if (value >= mySpec.SpecMin && value <= mySpec.SpecMax)
{
dut.StoreCrossDac(startDAC);
result = true;
outDAC = startDAC;
outCrossing = value;
Log.SaveLogToTxt("BestCrossingDAC=" + startDAC + " " + "BestCrossing=" + value.ToString());
return(true);
}
else
{
Log.SaveLogToTxt("I Can't find Best DAC ");
return(false);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
}
/// <summary>
/// 精细查找最好的那个点
/// </summary>
/// <param name="ScanArray">采样数组</param>
/// <returns></returns>
protected Int32 SearchBestPoint(Int32[] ScanArray)
{
double[] ErrorRate = new double[ScanArray.Length];
ushort[] rxADCs = new ushort[ScanArray.Length];
try
{
ArrayList StrLog = new ArrayList();
for (int i = 0; i < ScanArray.Length; i++)
{
dut.WriteAPDDac(ScanArray[i]);
Thread.Sleep(200);
ErrorRate[i] = pED.GetErrorRate();
dut.ReadRxpADC(out rxADCs[i]);
StrLog.Add("ScanArray[" + i + "] = " + ScanArray[i] + " " + " ErrorRate[" + i + "] = " + ErrorRate[i] + " RxADC[" + i + "] = " + rxADCs[i]);
}
for (int i = 0; i < StrLog.Count; i++)
{
Log.SaveLogToTxt(StrLog[i].ToString());
}
byte bIndex;
ArrayList TempArray = new ArrayList();
TempArray.Clear();
for (int i = 0; i < ScanArray.Length; i++)
{
TempArray.Add(ErrorRate[i]);
}
Algorithm.SelectMinValue(TempArray, out bIndex);
Log.SaveLogToTxt("BestAPD =" + ScanArray[bIndex].ToString());
Log.SaveLogToTxt("MinErrorRate =" + ErrorRate[bIndex].ToString());
//Log.SaveLogToTxt("ErrorRate[" + bIndex + "] =" + TempValue);
if (referenceRxADC == null)
{
referenceRxADC = new ushort[GlobalParameters.TotalChCount];
referenceTemp = GlobalParameters.CurrentTemp;
}
if (referenceTemp == GlobalParameters.CurrentTemp)
{
referenceRxADC[GlobalParameters.CurrentChannel - 1] = rxADCs[bIndex];
return(int.Parse(ScanArray[bIndex].ToString()));
}
ushort deltaRxADC = 65535;
int index = bIndex;
for (int i = 0; i < ErrorRate.Length; i++)
{
if (Math.Abs(ErrorRate[i] - ErrorRate[bIndex]) < 10 * ErrorRate[bIndex])
{
int delta = Math.Abs(rxADCs[i] - referenceRxADC[GlobalParameters.CurrentChannel - 1]);
if (delta < deltaRxADC)
{
deltaRxADC = (ushort)delta;
index = i;
}
}
}
Log.SaveLogToTxt("BestAPD = " + ScanArray[index] + " ErrorRate = " + ErrorRate[index] + " RxADC = " + rxADCs[index]);
return(int.Parse(ScanArray[index].ToString()));
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(InnoExCeption.NaN);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(InnoExCeption.NaN);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
}
private bool AdjustMethod_1()//
{
bool flag = false;
double CurrentCrossing;
try
{
//scope.EyeTuningDisplay(0);
Int32 StartDac = myStruct.DACStart;
dut.WriteCrossDac(myStruct.DACStart);
scope.AutoScale();
Thread.Sleep(3000);
CurrentCrossing = GetCrossing();
if (CurrentCrossing <= mySpec.AdjustSpecMax && CurrentCrossing >= mySpec.AdjustSpecMin)
{
Log.SaveLogToTxt("CurrentCrossing is " + CurrentCrossing);
dut.StoreCrossDac(StartDac);
outDAC = myStruct.DACStart;
outCrossing = CurrentCrossing;
flag = true;
return(flag);
}
else
{
flag = false;
int i = 0;
logList.Clear();
while (!flag)
{
//if (StartDac > myStruct.DACMax || StartDac < myStruct.DACMin)
//{
// break;
//}
//if (i > 20)
//{
// break;
//}
dut.WriteCrossDac(StartDac);
scope.ClearDisplay();
Thread.Sleep(1000);
CurrentCrossing = GetCrossing();
outDAC = StartDac;
logList.Add("DAC=" + StartDac + " Crossing=" + CurrentCrossing);
if (CurrentCrossing > mySpec.AdjustSpecMax)
{
StartDac -= myStruct.DacStep;
}
else if (CurrentCrossing < mySpec.AdjustSpecMin)
{
StartDac += myStruct.DacStep;
}
else
{
dut.StoreCrossDac(StartDac);
flag = true;
break;
}
if (StartDac > myStruct.DACMax || StartDac < myStruct.DACMin)
{
break;
}
if (i > 20)
{
break;
}
i++;
}
}
for (int i = 0; i < logList.Count; i++)
{
Log.SaveLogToTxt(logList[i].ToString());
}
// outDAC = myStruct.DACStart;
//outCrossing = GetCrossing();
if (!flag && CurrentCrossing >= mySpec.SpecMin && CurrentCrossing <= mySpec.SpecMax)
{
flag = true;
}
dut.StoreCrossDac(outDAC);
outCrossing = CurrentCrossing;
if (flag)
{
Log.SaveLogToTxt("BestCrossingDAC=" + outDAC + " " + "BestCrossing=" + outCrossing.ToString());
return(true);
}
else
{
Log.SaveLogToTxt("I Can't find Best DAC ");
return(false);
}
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
}
private bool AdjustAPDMethod1()
{
try
{
byte Index;
if (!SearchTargetPoint(out Index))// 搜寻Testplan 中填写的 参考点
{
return(false);
}
ScanArray = new Int32[adjustAPDStruct.ScanCount];
if (Index == 0)//如果最好值为最小的一个点
{
Int32 Step = (adjustAPDStruct.SetPoints[1] - adjustAPDStruct.SetPoints[0]) / adjustAPDStruct.ScanCount;
for (int i = 0; i < ScanArray.Length; i++)
{
ScanArray[i] = adjustAPDStruct.SetPoints[0] + i * Step;
}
}
else if (Index == adjustAPDStruct.SetPoints.Length - 1)// 如果最好值为最大点
{
Int32 Step = (adjustAPDStruct.SetPoints[Index] - adjustAPDStruct.SetPoints[Index - 1]) / adjustAPDStruct.ScanCount;
for (int i = 0; i < ScanArray.Length; i++)
{
ScanArray[i] = adjustAPDStruct.SetPoints[Index - 1] + i * Step;
}
}
else
{
Int32 MinValue = (adjustAPDStruct.SetPoints[Index] + adjustAPDStruct.SetPoints[Index - 1]) / 2;
Int32 MaxValue = (adjustAPDStruct.SetPoints[Index + 1] + adjustAPDStruct.SetPoints[Index]) / 2;
Int32 Step = (MaxValue - MinValue) / adjustAPDStruct.ScanCount;
for (int i = 0; i < ScanArray.Length; i++)
{
ScanArray[i] = MinValue + i * Step;
}
}
targetApd = SearchBestPoint(ScanArray.ToArray());
dut.StoreAPDDac(targetApd);
isApdAdjustOK = true;
Thread.Sleep(30000);
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02109, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02109, error.StackTrace);
}
}
private bool AdjustCrossing_Precision(double outCrossing, Int32 index, Int32[] DACArray, double[] itemArray)
{
Int32[] PrecisDAC_Array = new Int32[10];
double[] PrecisItem_Array = new double[10];
try
{
if (index == 0)//如果最好值为最小的一个点
{
precisStep = (Int32)((DACArray[1] - DACArray[0]) / 10);
for (int i = 0; i < 10; i++)
{
PrecisDAC_Array[i] = DACArray[0] + i * precisStep;
}
}
else if (index == itemArray.Length)// 如果最好值为最大点
{
precisStep = (Int32)((DACArray[DACArray.Length - 1] - DACArray[DACArray.Length - 2]) / 10);
for (int i = 0; i < 10; i++)
{
PrecisDAC_Array[i] = DACArray[0] + i * precisStep;
}
}
else
{
Int32 MinValue = (DACArray[index] + DACArray[index - 1]) / 2;
Int32 MaxValue = (DACArray[index + 1] + DACArray[index]) / 2;
precisStep = (MaxValue - MinValue) / 10;
for (int i = 0; i < 10; i++)
{
PrecisDAC_Array[i] = MinValue + i * precisStep;
}
}
for (int i = 0; i < 10; i++)
{
dut.WriteCrossDac(PrecisDAC_Array[i]);
Thread.Sleep(200);
scope.ClearDisplay();
Thread.Sleep(2000);
PrecisItem_Array[i] = GetCrossing();
Log.SaveLogToTxt("PrecisDAC_Array[" + i.ToString() + "]=" + PrecisDAC_Array[i].ToString() + " " + "PrecisItem_Array[" + i.ToString() + "]=" + PrecisItem_Array[i].ToString());
}
byte Crossingindex = GetTargetPointIndex(mySpec.TypcalValue, Array.ConvertAll(PrecisItem_Array, s => Convert.ToDouble(s)));
dut.StoreCrossDac(PrecisDAC_Array[Crossingindex]);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);;
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02108, error.StackTrace);
}
return(true);
}
protected bool CurveVccDMIandWriteCoefs()
{
byte tempCOUNT;
if (GlobalParameters.TotalVccCount <= 0)
{
tempCOUNT = 1;
}
else
{
tempCOUNT = GlobalParameters.TotalVccCount;
}
try
{
{
for (byte i = 0; i < tempVccArray.Length; i++)
{
tempVccArray[i] = tempVccArray[i] * 10000;
}
for (byte i = 0; i < tempCOUNT; i++)
{
double[] tempAdc = new double[calVccDmiStruct.ArrayListVcc.Count];
for (byte j = 0; j < calVccDmiStruct.ArrayListVcc.Count; j++)
{
tempAdc[j] = vccAdcArray[i, j];
allVccAdcArray.Add(vccAdcArray[i, j]);
}
double[] coefArray = Algorithm.MultiLine(tempAdc, tempVccArray, calVccDmiStruct.ArrayListVcc.Count, 1);
vccDmiCoefC = (float)coefArray[0];
vccDmiCoefB = (float)coefArray[1];
//vccDmiCoefA = (float)coefArray[2];
vccDmiCoefArray = ArrayList.Adapter(coefArray);
vccDmiCoefArray.Reverse();
for (byte k = 0; k < vccDmiCoefArray.Count; k++)
{
Log.SaveLogToTxt("vccDmiCoefArray[" + k.ToString() + "]=" + vccDmiCoefArray[k].ToString() + " " + Algorithm.ByteArraytoString(2, ",", Algorithm.INT16To2Bytes(vccDmiCoefArray[k])));
}
Log.SaveLogToTxt("Step4...WriteCoef");
#region W&R Vcccoefc
isWriteCoefCOk = dut.SetVcccoefc(vccDmiCoefC.ToString(), (byte)(i + 1));
if (isWriteCoefCOk)
{
Log.SaveLogToTxt("WritevccDmiCoefC:" + isWriteCoefCOk.ToString());
}
else
{
Log.SaveLogToTxt("WritevccDmiCoefC:" + isWriteCoefCOk.ToString());
}
#endregion
#region W&R Vcccoefb
isWriteCoefBOk = dut.SetVcccoefb(vccDmiCoefB.ToString(), (byte)(i + 1));
if (isWriteCoefBOk)
{
Log.SaveLogToTxt("WritevccDmiCoefB:" + isWriteCoefBOk.ToString());
}
else
{
Log.SaveLogToTxt("WritevccDmiCoefB:" + isWriteCoefBOk.ToString());
}
#endregion
//#region W&R Vcccoefa
////isWriteCoefAOk = dut.SetVcccoefa(vccDmiCoefA.ToString(), i + 1);
//if (isWriteCoefAOk)
//{
// isWriteCoefAOk = true;
// Log.SaveLogToTxt("WritevccDmiCoefA:" + isWriteCoefAOk.ToString());
//}
//else
//{
// Log.SaveLogToTxt("WritevccDmiCoefA:" + isWriteCoefAOk.ToString());
//}
//#endregion
if (isWriteCoefBOk & isWriteCoefCOk)
{
Log.SaveLogToTxt("isCalVccDmiOk:" + true.ToString());
}
else
{
Log.SaveLogToTxt("isCalVccDmiOk:" + false.ToString());
return(false);
}
}
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02100, error.StackTrace);
}
}
private bool AdjustMask_Precision(double TargetMask, Int32 index, Int32[] DACArray, double[] itemArray)
{
int PrecisDAC_Array_length = 0;
Int32 MinValue, MaxValue;
Int32[] PrecisDAC_Array; //= new Int32[10];
double[] PrecisItem_Array; // = new double[10];
try
{
if (index == 0)//如果最好值为最小的一个点
{
MinValue = DACArray[0];
MaxValue = DACArray[1];
}
else if (index == itemArray.Length - 1)// 如果最好值为最大点
{
MinValue = DACArray[DACArray.Length - 2];
MaxValue = DACArray[DACArray.Length - 1];
}
else// 中间值
{
MinValue = (DACArray[index] + DACArray[index - 1]) / 2;
MaxValue = (DACArray[index + 1] + DACArray[index]) / 2;
}
PrecisStep = (Int32)((MaxValue - MinValue) / 5);
if (PrecisStep <= 1)
{
PrecisStep = 1;
PrecisDAC_Array_length = (Int32)((MaxValue - MinValue) / 1);
}
else
{
PrecisDAC_Array_length = 5;
}
PrecisDAC_Array = new Int32[PrecisDAC_Array_length];
PrecisItem_Array = new double[PrecisDAC_Array_length];
for (int i = 0; i < PrecisDAC_Array_length; i++)
{
PrecisDAC_Array[i] = MinValue + i * PrecisStep;
}
for (int i = 0; i < PrecisDAC_Array_length; i++)
{
// dut.WriteMaskDac(PrecisDAC_Array[i]);
WriteMaskDAC(PrecisDAC_Array[i]);
Thread.Sleep(200);
pScope.ClearDisplay();
Thread.Sleep(2000);
PrecisItem_Array[i] = GetMask();
Log.SaveLogToTxt("PrecisDAC_Array[" + i.ToString() + "]=" + PrecisDAC_Array[i].ToString() + " " + "PrecisItem_Array[" + i.ToString() + "]=" + PrecisItem_Array[i].ToString());
}
byte Maskindex = GetTargetPointIndex(MySpec.TypcalValue, Array.ConvertAll(PrecisItem_Array, s => Convert.ToDouble(s)));
//dut.StoreMaskDac(PrecisDAC_Array[Maskindex]);
StoreMaskDAC(PrecisDAC_Array[Maskindex]);
TargetDac = PrecisDAC_Array[Maskindex];
TargetMask = PrecisItem_Array[Maskindex];
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02111, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02111, error.StackTrace);
}
return(true);
}
protected override bool AnalysisOutputParameters(TestModeEquipmentParameters[] InformationList)
{
lock (tempScope)
{
try
{
outputParameters = new TestModeEquipmentParameters[12];
outputParameters[0].FiledName = "AP(DBM)";
apDBM = Algorithm.ISNaNorIfinity(apDBM);
outputParameters[0].DefaultValue = Math.Round(apDBM, 4).ToString().Trim();
outputParameters[1].FiledName = "ER(DB)";
er = Algorithm.ISNaNorIfinity(er);
outputParameters[1].DefaultValue = Math.Round(er, 4).ToString().Trim();
outputParameters[2].FiledName = "CROSSING(%)";
crossing = Algorithm.ISNaNorIfinity(crossing);
outputParameters[2].DefaultValue = Math.Round(crossing, 4).ToString().Trim();
outputParameters[3].FiledName = "MASKMARGIN(%)";
marginVaulue = Algorithm.ISNaNorIfinity(marginVaulue);
outputParameters[3].DefaultValue = Math.Round(marginVaulue, 4).ToString().Trim();
outputParameters[4].FiledName = "JITTERRMS(PS)";
jitterRMS = Algorithm.ISNaNorIfinity(jitterRMS);
outputParameters[4].DefaultValue = Math.Round(jitterRMS, 4).ToString().Trim();
outputParameters[5].FiledName = "JITTERPP(PS)";
jitterPP = Algorithm.ISNaNorIfinity(jitterPP);
outputParameters[5].DefaultValue = Math.Round(jitterPP, 4).ToString().Trim();
outputParameters[6].FiledName = "RISETIME(PS)";
riseTime = Algorithm.ISNaNorIfinity(riseTime);
outputParameters[6].DefaultValue = Math.Round(riseTime, 4).ToString().Trim();
outputParameters[7].FiledName = "FALLTIME(PS)";
fallTime = Algorithm.ISNaNorIfinity(fallTime);
outputParameters[7].DefaultValue = Math.Round(fallTime, 4).ToString().Trim();
outputParameters[8].FiledName = "TXOMA(DBM)";
OEOMA = Algorithm.ISNaNorIfinity(OEOMADBM);
outputParameters[8].DefaultValue = Math.Round(OEOMADBM, 4).ToString().Trim();
outputParameters[9].FiledName = "EYEHEIGHT(MW)"; //EyeHeight
EyeHeight = Algorithm.ISNaNorIfinity(EyeHeight);
outputParameters[9].DefaultValue = Math.Round(EyeHeight, 4).ToString().Trim();
outputParameters[10].FiledName = "BitRate(GB/S)"; //EyeHeight
bitRate = Algorithm.ISNaNorIfinity(bitRate);
outputParameters[10].DefaultValue = Math.Round(bitRate, 4).ToString().Trim();
outputParameters[11].FiledName = "XMASKMARGIN2(%)"; //EyeHeight
bitRate = Algorithm.ISNaNorIfinity(XmarginVaulue2);
outputParameters[11].DefaultValue = Math.Round(XmarginVaulue2, 4).ToString().Trim();
for (int i = 0; i < outputParameters.Length; i++)
{
Log.SaveLogToTxt(outputParameters[i].FiledName + " : " + outputParameters[i].DefaultValue);
}
return(true);
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return(false);
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
}
}
}
protected override bool AnalysisOutputParameters(TestModeEquipmentParameters[] InformationList)
{
try
{
outputParameters = new TestModeEquipmentParameters[20];
outputParameters[0].FiledName = "TEMPHA";
outputParameters[0].DefaultValue = Convert.ToString(Convert.ToDouble(!tempHA)).ToString().Trim();
outputParameters[1].FiledName = "TEMPHW";
outputParameters[1].DefaultValue = Convert.ToString(Convert.ToDouble(!tempHW)).ToString().Trim();
outputParameters[2].FiledName = "TEMPLA";
outputParameters[2].DefaultValue = Convert.ToString(Convert.ToDouble(!tempLA)).ToString().Trim();
outputParameters[3].FiledName = "TEMPLW";
outputParameters[3].DefaultValue = Convert.ToString(Convert.ToDouble(!tempLW)).ToString().Trim();
outputParameters[4].FiledName = "VCCHA";
outputParameters[4].DefaultValue = Convert.ToString(Convert.ToDouble(!vccHA)).ToString().Trim();
outputParameters[5].FiledName = "VCCHW";
outputParameters[5].DefaultValue = Convert.ToString(Convert.ToDouble(!vccHW)).ToString().Trim();
outputParameters[6].FiledName = "VCCLA";
outputParameters[6].DefaultValue = Convert.ToString(Convert.ToDouble(!vccLA)).ToString().Trim();
outputParameters[7].FiledName = "VCCLW";
outputParameters[7].DefaultValue = Convert.ToString(Convert.ToDouble(!vccLW)).ToString().Trim();
outputParameters[8].FiledName = "IBIASHA";
outputParameters[8].DefaultValue = Convert.ToString(Convert.ToDouble(!ibiasHA)).ToString().Trim();
outputParameters[9].FiledName = "IBIASHW";
outputParameters[9].DefaultValue = Convert.ToString(Convert.ToDouble(!ibiasHW)).ToString().Trim();
outputParameters[10].FiledName = "IBIASLA";
outputParameters[10].DefaultValue = Convert.ToString(Convert.ToDouble(!ibiasLA)).ToString().Trim();
outputParameters[11].FiledName = "IBIASLW";
outputParameters[11].DefaultValue = Convert.ToString(Convert.ToDouble(!ibiasLW)).ToString().Trim();
outputParameters[12].FiledName = "TXPOWERHA";
outputParameters[12].DefaultValue = Convert.ToString(Convert.ToDouble(!txPowerHA)).ToString().Trim();
outputParameters[13].FiledName = "TXPOWERHW";
outputParameters[13].DefaultValue = Convert.ToString(Convert.ToDouble(!txPowerHW)).ToString().Trim();
outputParameters[14].FiledName = "TXPOWERLA";
outputParameters[14].DefaultValue = Convert.ToString(Convert.ToDouble(!txPowerLA)).ToString().Trim();
outputParameters[15].FiledName = "TXPOWERLW";
outputParameters[15].DefaultValue = Convert.ToString(Convert.ToDouble(!txPowerLW)).ToString().Trim();
outputParameters[16].FiledName = "RXPOWERHA";
outputParameters[16].DefaultValue = Convert.ToString(Convert.ToDouble(!rxPowerHA)).ToString().Trim();
outputParameters[17].FiledName = "RXPOWERHW";
outputParameters[17].DefaultValue = Convert.ToString(Convert.ToDouble(!rxPowerHW)).ToString().Trim();
outputParameters[18].FiledName = "RXPOWERLA";
outputParameters[18].DefaultValue = Convert.ToString(Convert.ToDouble(!rxPowerLA)).ToString().Trim();
outputParameters[19].FiledName = "RXPOWERLW";
outputParameters[19].DefaultValue = Convert.ToString(Convert.ToDouble(!rxPowerLW)).ToString().Trim();
return true;
}
catch (InnoExCeption ex)//from driver
{
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return false;
}
catch (Exception error)//from itself
{
//one way: deal this exception itself
InnoExCeption ex = new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
//Log.SaveLogToTxt(ex.ID + ": " + ex.Message + "\r\n" + ex.StackTrace);
exceptionList.Add(ex);
return false;
//the other way is: should throw exception, rather than the above three code. see below:
//throw new InnoExCeption(ExceptionDictionary.Code._0x02F04, error.StackTrace);
}
}