///
/// * <param name="xm">
/// * @return </param>
///
protected internal virtual JDFMedia initPlateMedia()
{
if (theParentNode != null)
{
theNode.ensureLink(theParentNode.getResource(ElementName.MEDIA, EnumUsage.Input, 0), EnumUsage.Input, null);
}
JDFMedia m = (JDFMedia)theNode.getCreateResource(ElementName.MEDIA, EnumUsage.Input, 0);
if (EnumMediaType.Paper.Equals(m.getMediaType()))
{
m = (JDFMedia)theNode.getCreateResource(ElementName.MEDIA, EnumUsage.Input, 1);
}
m.setResStatus(EnumResStatus.Available, false);
m.makeRootResource(null, theNode.getJDFRoot(), true);
theNode.getJDFRoot().getCreateResourcePool().moveElement(m, null);
m.setDescriptiveName("the plates to use");
m.setMediaType(EnumMediaType.Plate);
m.setPartUsage(EnumPartUsage.Implicit);
if (bPartitionedPlateMedia && vParts != null)
{
VJDFAttributeMap vSheets = getReducedMap(new VString("Side Separation PartVersion", null));
for (int i = 0; i < vSheets.Count; i++)
{
JDFAttributeMap part = new JDFAttributeMap(vSheets[i]);
// JDFResource mm=
m.getCreatePartition(part, partIDKeys);
}
}
else
{
m.setDimensionCM(new JDFXYPair(70, 102));
}
return(m);
}
///
/// * <param name="icsLevel"> </param>
///
protected internal virtual JDFMedia initPaperMedia()
{
JDFResourceLink rlM = null;
if (thePreviousNode != null)
{
JDFMedia media = (JDFMedia)thePreviousNode.getResource(ElementName.MEDIA, EnumUsage.Input, 0);
if (media != null && !EnumMediaType.Paper.Equals(media.getMediaType()))
{
media = (JDFMedia)thePreviousNode.getResource(ElementName.MEDIA, EnumUsage.Input, 1);
}
if (media != null && !EnumMediaType.Paper.Equals(media.getMediaType()))
{
media = null;
}
if (media == null)
{
media = getMediaFromNode(thePreviousNode);
if (media == null)
{
VElement v = thePreviousNode.getPredecessors(true, false);
if (v != null)
{
int siz = v.Count;
for (int i = 0; i < siz; i++)
{
media = getMediaFromNode((JDFNode)v[i]);
if (media != null)
{
break;
}
}
}
}
}
rlM = theNode.linkResource(media, EnumUsage.Input, null);
}
if (rlM == null && theParentNode != null)
{
rlM = theNode.linkResource(theParentNode.getResource(ElementName.MEDIA, EnumUsage.Input, 0), EnumUsage.Input, null);
}
paperMedia = (JDFMedia)theNode.getCreateResource(ElementName.MEDIA, null, 0);
paperMedia.setDescriptiveName("the paper to print on");
paperMedia.setResStatus(EnumResStatus.Unavailable, false);
paperMedia.setMediaType(EnumMediaType.Paper);
paperMedia.setDimensionCM(new JDFXYPair(70, 102));
paperMedia.setWeight(90);
paperMedia.setThickness(90 / 0.8);
return(paperMedia);
}
public virtual void testMediaCatalog()
{
JDFDoc doc = new JDFDoc(ElementName.JMF);
JDFJMF jmf = doc.getJMFRoot();
jmf.setSenderID("DeviceSenderID");
JDFQuery q = jmf.appendQuery(EnumType.Resource);
q.setXMLComment("This is the query for a catalog");
JDFResourceQuParams rqp = q.appendResourceQuParams();
rqp.setExact(true);
rqp.setXMLComment("Scope=Allowed is a new attribute to describe that we want a complet list of all known resources");
rqp.setResourceName(ElementName.MEDIA);
// rqp.setAttribute("Scope", "Allowed");
JDFResponse r = q.createResponse().getResponse(0);
r = (JDFResponse)jmf.moveElement(r, null);
r.setXMLComment("This is the response to the query - generally it will be in it's own jmf...\nThe list of ResourceInfo + the ResourceQuParams could also be specified in a Signal.");
for (int i = 1; i < 5; i++)
{
JDFResourceInfo ri = r.appendResourceInfo();
ri.setResourceName("Media");
JDFMedia m = (JDFMedia)ri.appendResource("Media");
m.setDescriptiveName("Description of Media #" + i);
m.setDimensionCM(new JDFXYPair(i * 10, 13 + i % 2 * 20));
m.setBrand("Brand #" + i);
m.setProductID("ProductID_" + i);
m.setMediaType(EnumMediaType.Paper);
m.setResStatus((i < 2 ? EnumResStatus.Available : EnumResStatus.Unavailable), false);
ri.setXMLComment("More attributes can be added as needed; Available = loaded");
}
doc.write2File(sm_dirTestDataTemp + "MediaCatalog.jmf", 2, false);
Assert.IsTrue(jmf.isValid(EnumValidationLevel.Complete));
}
public virtual void testStripMarks()
{
// TODO relativeSize AbsoluteSize NextPosition
JDFElement.setLongID(false);
n.getCreateResourcePool().appendXMLComment("StrippingParams with one sheet for simplicity", null);
JDFMedia media = stripParams.appendMedia();
media.setDimensionCM(new JDFXYPair(100, 70));
JDFStrippingParams spS1 = (JDFStrippingParams)stripParams.addPartition(EnumPartIDKey.SheetName, "Sheet_1");
{
JDFStripMark sm1 = spS1.appendStripMark();
sm1.setXMLComment("The following mark is on the press sheet (see new Attribute: MarkContext)\n@Anchor defines the cs origin of the mark, @NextAnchor defines the cs origin of the container, in this case the sheet\nThus the top center of the mark is rotated by 90° and placed exactly on (Position=0 0) the center right of the sheet\nNote that position is defined in absolute coordinates so that it alligns with Margin\nI propose deprecating StripMark/Position because the box paradigm does not fit well with resizeable marks.");
sm1.setAttribute("MarkContext", "Sheet");
sm1.setMarkName("ColorControlStrip");
sm1.setMarkSide(EnumMarkSide.TwoSidedIndependent);
sm1.setAttribute("Orientation", "Rotate90");
setNextAnchor(sm1, null, "CenterRight", "0 0", null, "Parent");
sm1.setAttribute("Anchor", "TopCenter");
sm1.appendElement(ElementName.COLORCONTROLSTRIP).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
}
JDFStrippingParams spBS1 = (JDFStrippingParams)spS1.addPartition(EnumPartIDKey.BinderySignatureName, "BS_1");
JDFBinderySignature bs1 = spBS1.appendBinderySignature();
bs1.setNumberUp(new JDFXYPair(2, 4));
JDFPosition posBS1_1 = spBS1.appendPosition();
posBS1_1.setRelativeBox(new JDFRectangle(0, 0, 0.5, 1));
{
JDFStripMark sm1_1 = spBS1.appendStripMark();
sm1_1.setXMLComment("The following describes a back to back mark on the folding signature (see new Attribute: MarkContext)\n@Anchor defines the cs origin of the mark, @NextAnchor defines the cs origin of the container, in this case the bindery signature.\nThus the center of the cutmark is positioned 5 pts left(-5) and 5 pts up(+5) from the bottom right of the bindery Signature");
sm1_1.setAttribute("MarkContext", "BinderySignature");
sm1_1.setMarkName("CutMark");
sm1_1.setMarkSide(EnumMarkSide.TwoSidedBackToBack);
sm1_1.setAttribute("Orientation", "Rotate0");
sm1_1.setAttribute("Anchor", "Center");
setNextAnchor(sm1_1, null, "BottomRight", "-5 5", null, "Parent");
sm1_1.appendElement(ElementName.CUTMARK).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
}
// TODO page cs vs. cell cs
{
JDFStripMark sm1_2 = spBS1.appendStripMark();
sm1_2.setXMLComment("The following describes a 4 back marks, one on each pair of Strip Cells (page) (see new Attribute: MarkContext)\n@Anchor defines the cs origin of the mark, @NextAnchor defines the cs origin of the container, in this case the spine of a pair of Page cells.\nThus the center of the bar code is positioned 0 pts right and 5 point up from the bottom spine of the cell page.\n Position is applied prior to rotating the mark.");
sm1_2.setAttribute("MarkContext", "CellPair");
sm1_2.setMarkName("IdentificationField");
sm1_2.setMarkSide(EnumMarkSide.Back);
sm1_2.setAttribute("Orientation", "Rotate90");
sm1_2.setAttribute("Anchor", "CenterLeft");
setNextAnchor(sm1_2, null, "BottomCenter", "5 0", null, "Parent");
sm1_2.appendElement(ElementName.IDENTIFICATIONFIELD).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
}
{
JDFStripMark sm1_3 = spBS1.appendStripMark();
sm1_3.setXMLComment("The following describes a back mark on each of the 8 Strip Cells (page) (see new Attribute: MarkContext)\n@Anchor defines the cs origin of the mark, @NextAnchor defines the cs origin of the container, in this case the bottom center of a Page cell.\nThus the center of the bar code is positioned 0 pts right and 5 point up from the bottom cell page.");
sm1_3.setAttribute("MarkContext", "Cell");
sm1_3.setMarkName("IdentificationField");
sm1_3.setMarkSide(EnumMarkSide.Back);
sm1_3.setAttribute("Orientation", "Rotate0");
sm1_3.setAttribute("Anchor", "BottomCenter");
setNextAnchor(sm1_3, null, "BottomCenter", "0 5", null, "Parent");
sm1_3.setAttribute("AbsoluteWidth", "20");
sm1_3.setAttribute("AbsoluteHeight", "10");
sm1_3.appendElement(ElementName.IDENTIFICATIONFIELD).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
}
JDFStrippingParams spBS2 = (JDFStrippingParams)spS1.addPartition(EnumPartIDKey.BinderySignatureName, "BS_2");
spBS2.appendBinderySignature();
JDFPosition posBS2_1 = spBS2.appendPosition();
posBS2_1.setRelativeBox(new JDFRectangle(0.5, 0, 1, 0.5));
posBS2_1.setOrientation(EnumOrientation.Rotate270);
JDFPosition posBS2_2 = spBS2.appendPosition();
posBS2_2.setRelativeBox(new JDFRectangle(0.5, 0.5, 1, 1));
posBS2_2.setOrientation(EnumOrientation.Flip90);
{
JDFStripMark sm2_1 = spBS2.appendStripMark();
sm2_1.setXMLComment("The following describes single sided barcode on the two folding signatures (see new Attribute: MarkContext)\n@Anchor defines the cs origin of the mark, @NextAnchor defines the cs origin of the container, in this case the 2 bindery signatures.\nThus the top left of the barcode is positioned 3 pts right(+3) and 3 pts below(-3) from the top left of the front side of the bindery Signature.\nSince ther are two position elements, this results in two marks:\nPosition one is rotated by 90 degrees so that the barcode remains on the front of the sheet. Due to the Position/@Rotation, the mark is also rotated by 90° on the press sheet\n Position 2 is also flipped so that the barcode eventually ends up on the back of the press sheet.");
sm2_1.setAttribute("MarkContext", "BinderySignature");
sm2_1.setMarkName("IdentificationField");
sm2_1.setMarkSide(EnumMarkSide.Front);
sm2_1.setAttribute("Orientation", "Rotate0");
sm2_1.setAttribute("Anchor", "TopLeft");
setNextAnchor(sm2_1, null, "TopLeft", "2 -3", null, "Parent");
string idAnchor = sm2_1.appendAnchor(null);
sm2_1.appendElement(ElementName.IDENTIFICATIONFIELD).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
JDFStripMark sm2_2 = spBS2.appendStripMark();
sm2_2.setXMLComment("The following is a relatively positioned stripmark.");
sm2_2.setAttribute("MarkContext", "BinderySignature");
sm2_1.setAttribute("Anchor", "BottomLeft");
sm2_2.setMarkName("RegisterMark");
sm2_2.setMarkSide(EnumMarkSide.Front);
sm2_2.setAttribute("Orientation", "Rotate0");
sm2_2.appendElement(ElementName.REGISTERMARK).setXMLComment("The various explicit mark elements should be allowed here for their associated metatdata");
setNextAnchor(sm2_2, idAnchor, "BottomRight", "3 0", "This NextAnchor element refers to the previous barcode. the lower left of this is 3 points tothe right of the lower right of the referenced barcode.", "Sibling");
}
d.write2File(sm_dirTestDataTemp + "StripMarks.jdf", 2, false);
}