public static void testEditShape()
{
{
// std::shared_ptr<Esri_runtimecore::Geometry::Polygon> poly_base_6
// = std::make_shared<Esri_runtimecore::Geometry::Polygon>();
// Single part polygon
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(14, 15);
poly.lineTo(10, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(14, 15);
poly.lineTo(10, 11);
poly.startPath(100, 10);
poly.lineTo(100, 12);
poly.lineTo(14, 150);
poly.lineTo(10, 101);
poly.lineTo(100, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Single part polyline
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(14, 15);
poly.lineTo(10, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape
.getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(14, 15);
poly.lineTo(10, 11);
poly.startPath(100, 10);
poly.lineTo(100, 12);
poly.lineTo(14, 150);
poly.lineTo(10, 101);
poly.lineTo(100, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape
.getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Five part poly. Close one of parts to test if it works.
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(14, 15);
poly.lineTo(10, 11);
poly.startPath(100, 10);
poly.lineTo(100, 12);
poly.lineTo(14, 150);
poly.lineTo(10, 101);
poly.lineTo(100, 11);
poly.startPath(1100, 101);
poly.lineTo(1300, 132);
poly.lineTo(144, 150);
poly.lineTo(106, 1051);
poly.lineTo(1600, 161);
poly.startPath(100, 190);
poly.lineTo(1800, 192);
poly.lineTo(184, 8150);
poly.lineTo(1080, 181);
poly.startPath(1030, 10);
poly.lineTo(1300, 132);
poly.lineTo(314, 3150);
poly.lineTo(310, 1301);
poly.lineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
editShape.setClosedPath(editShape.getNextPath(editShape.getFirstPath(geom)), true
);
((com.esri.core.geometry.MultiPathImpl)poly._getImpl()).closePathWithLine(1);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape
.getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(314, 3150);
poly.lineTo(310, 1301);
poly.lineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
int vertex = editShape.getFirstVertex(editShape.getFirstPath(geom));
vertex = editShape.removeVertex(vertex, true);
vertex = editShape.getNextVertex(vertex);
editShape.removeVertex(vertex, true);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape
.getGeometry(geom);
poly.setEmpty();
poly.startPath(10, 12);
poly.lineTo(310, 1301);
poly.lineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 12);
poly.lineTo(314, 3150);
poly.lineTo(310, 1301);
poly.lineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
int vertex = editShape.getFirstVertex(editShape.getFirstPath(geom));
vertex = editShape.removeVertex(vertex, true);
vertex = editShape.getNextVertex(vertex);
editShape.removeVertex(vertex, true);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
poly.setEmpty();
poly.startPath(10, 12);
poly.lineTo(310, 1301);
poly.lineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 10.001);
poly.lineTo(10.001, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
editShape.filterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.isEmpty());
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 10.0025);
poly.lineTo(11.0, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
editShape.filterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
NUnit.Framework.Assert.IsTrue(!poly2.isEmpty());
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.startPath(10, 10);
poly.lineTo(10, 10.001);
poly.lineTo(11.0, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape
();
int geom = editShape.addGeometry(poly);
editShape.filterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.
getGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.isEmpty());
}
{
// Test attribute splitting 1
com.esri.core.geometry.Polyline polyline = new com.esri.core.geometry.Polyline();
polyline.startPath(0, 0);
polyline.lineTo(1, 1);
polyline.lineTo(2, 2);
polyline.lineTo(3, 3);
polyline.lineTo(4, 4);
polyline.startPath(5, 5);
polyline.lineTo(6, 6);
polyline.lineTo(7, 7);
polyline.lineTo(8, 8);
polyline.lineTo(9, 9);
polyline.addAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 0, 0,
4);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 1, 0,
8);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 2, 0,
12);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 3, 0,
16);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 4, 0,
20);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 5, 0,
22);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 6, 0,
26);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 7, 0,
30);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 8, 0,
34);
polyline.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 9, 0,
38);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int geometry = shape.addGeometry(polyline);
com.esri.core.geometry.AttributeStreamOfInt32 vertex_handles = new com.esri.core.geometry.AttributeStreamOfInt32
(0);
for (int path = shape.getFirstPath(geometry); path != -1; path = shape.getNextPath
(path))
{
for (int vertex = shape.getFirstVertex(path); vertex != -1; vertex = shape.getNextVertex
(vertex))
{
if (vertex != shape.getLastVertex(path))
{
vertex_handles.add(vertex);
}
}
}
double[] t = new double[1];
for (int i = 0; i < vertex_handles.size(); i++)
{
int vertex = vertex_handles.read(i);
t[0] = 0.5;
shape.splitSegment(vertex, t, 1);
}
com.esri.core.geometry.Polyline chopped_polyline = (com.esri.core.geometry.Polyline
)shape.getGeometry(geometry);
NUnit.Framework.Assert.IsTrue(chopped_polyline.getPointCount() == 18);
double att_ = 4;
for (int i_1 = 0; i_1 < 18; i_1++)
{
double att = chopped_polyline.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.Z, i_1, 0);
NUnit.Framework.Assert.IsTrue(att == att_);
att_ += 2;
}
}
{
// Test attribute splitting 2
com.esri.core.geometry.Polyline line1 = new com.esri.core.geometry.Polyline();
com.esri.core.geometry.Polyline line2 = new com.esri.core.geometry.Polyline();
line1.addAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
line2.addAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
line1.startPath(0, 0);
line1.lineTo(10, 10);
line2.startPath(10, 0);
line2.lineTo(0, 10);
line1.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0, 7);
line1.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0, 17
);
line2.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0, 5);
line2.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0, 15
);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int g1 = shape.addGeometry(line1);
int g2 = shape.addGeometry(line2);
com.esri.core.geometry.CrackAndCluster.execute(shape, 0.001, null, true);
com.esri.core.geometry.Polyline chopped_line1 = (com.esri.core.geometry.Polyline)
shape.getGeometry(g1);
com.esri.core.geometry.Polyline chopped_line2 = (com.esri.core.geometry.Polyline)
shape.getGeometry(g2);
double att1 = chopped_line1.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 1, 0);
double att2 = chopped_line2.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 1, 0);
NUnit.Framework.Assert.IsTrue(att1 == 12);
NUnit.Framework.Assert.IsTrue(att2 == 10);
}
{
// Test attribute splitting 3
com.esri.core.geometry.Polygon polygon = new com.esri.core.geometry.Polygon();
polygon.addAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
polygon.startPath(0, 0);
polygon.lineTo(0, 10);
polygon.lineTo(10, 10);
polygon.lineTo(10, 0);
polygon.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0,
7);
polygon.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0,
17);
polygon.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 2, 0,
23);
polygon.setAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 3, 0,
43);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int geometry = shape.addGeometry(polygon);
com.esri.core.geometry.AttributeStreamOfInt32 vertex_handles = new com.esri.core.geometry.AttributeStreamOfInt32
(0);
int start_v = shape.getFirstVertex(shape.getFirstPath(geometry));
int v = start_v;
do
{
vertex_handles.add(v);
v = shape.getNextVertex(v);
}while (v != start_v);
double[] t = new double[1];
for (int i = 0; i < vertex_handles.size(); i++)
{
int v1 = vertex_handles.read(i);
t[0] = 0.5;
shape.splitSegment(v1, t, 1);
}
com.esri.core.geometry.Polygon cut_polygon = (com.esri.core.geometry.Polygon)shape
.getGeometry(geometry);
NUnit.Framework.Assert.IsTrue(cut_polygon.getPointCount() == 8);
com.esri.core.geometry.Point2D pt0 = cut_polygon.getXY(0);
double a0 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 0, 0);
NUnit.Framework.Assert.IsTrue(a0 == 25);
com.esri.core.geometry.Point2D pt1 = cut_polygon.getXY(1);
double a1 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 1, 0);
NUnit.Framework.Assert.IsTrue(a1 == 7);
com.esri.core.geometry.Point2D pt2 = cut_polygon.getXY(2);
double a2 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 2, 0);
NUnit.Framework.Assert.IsTrue(a2 == 12);
com.esri.core.geometry.Point2D pt3 = cut_polygon.getXY(3);
double a3 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 3, 0);
NUnit.Framework.Assert.IsTrue(a3 == 17);
com.esri.core.geometry.Point2D pt4 = cut_polygon.getXY(4);
double a4 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 4, 0);
NUnit.Framework.Assert.IsTrue(a4 == 20);
com.esri.core.geometry.Point2D pt5 = cut_polygon.getXY(5);
double a5 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 5, 0);
NUnit.Framework.Assert.IsTrue(a5 == 23);
com.esri.core.geometry.Point2D pt6 = cut_polygon.getXY(6);
double a6 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 6, 0);
NUnit.Framework.Assert.IsTrue(a6 == 33);
com.esri.core.geometry.Point2D pt7 = cut_polygon.getXY(7);
double a7 = cut_polygon.getAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics
.M, 7, 0);
NUnit.Framework.Assert.IsTrue(a7 == 43);
}
}
public static void TestEditShape_()
{
{
// std::shared_ptr<Esri_runtimecore::Geometry::Polygon> poly_base_6
// = std::make_shared<Esri_runtimecore::Geometry::Polygon>();
// Single part polygon
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Single part polyline
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Five part poly. Close one of parts to test if it works.
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
poly.StartPath(1100, 101);
poly.LineTo(1300, 132);
poly.LineTo(144, 150);
poly.LineTo(106, 1051);
poly.LineTo(1600, 161);
poly.StartPath(100, 190);
poly.LineTo(1800, 192);
poly.LineTo(184, 8150);
poly.LineTo(1080, 181);
poly.StartPath(1030, 10);
poly.LineTo(1300, 132);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.SetClosedPath(editShape.GetNextPath(editShape.GetFirstPath(geom)), true);
((com.esri.core.geometry.MultiPathImpl)poly._getImpl()).ClosePathWithLine(1);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.esri.core.geometry.Polyline poly = new com.esri.core.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
int vertex = editShape.GetFirstVertex(editShape.GetFirstPath(geom));
vertex = editShape.RemoveVertex(vertex, true);
vertex = editShape.GetNextVertex(vertex);
editShape.RemoveVertex(vertex, true);
com.esri.core.geometry.Polyline poly2 = (com.esri.core.geometry.Polyline)editShape.GetGeometry(geom);
poly.SetEmpty();
poly.StartPath(10, 12);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
int vertex = editShape.GetFirstVertex(editShape.GetFirstPath(geom));
vertex = editShape.RemoveVertex(vertex, true);
vertex = editShape.GetNextVertex(vertex);
editShape.RemoveVertex(vertex, true);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
poly.SetEmpty();
poly.StartPath(10, 12);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.001);
poly.LineTo(10.001, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.IsEmpty());
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.0025);
poly.LineTo(11.0, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(!poly2.IsEmpty());
}
{
// Test Filter Close Points
com.esri.core.geometry.Polygon poly = new com.esri.core.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.001);
poly.LineTo(11.0, 10);
com.esri.core.geometry.EditShape editShape = new com.esri.core.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.esri.core.geometry.Polygon poly2 = (com.esri.core.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.IsEmpty());
}
{
// Test attribute splitting 1
com.esri.core.geometry.Polyline polyline = new com.esri.core.geometry.Polyline();
polyline.StartPath(0, 0);
polyline.LineTo(1, 1);
polyline.LineTo(2, 2);
polyline.LineTo(3, 3);
polyline.LineTo(4, 4);
polyline.StartPath(5, 5);
polyline.LineTo(6, 6);
polyline.LineTo(7, 7);
polyline.LineTo(8, 8);
polyline.LineTo(9, 9);
polyline.AddAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 0, 0, 4);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 1, 0, 8);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 2, 0, 12);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 3, 0, 16);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 4, 0, 20);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 5, 0, 22);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 6, 0, 26);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 7, 0, 30);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 8, 0, 34);
polyline.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.Z, 9, 0, 38);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int geometry = shape.AddGeometry(polyline);
com.esri.core.geometry.AttributeStreamOfInt32 vertex_handles = new com.esri.core.geometry.AttributeStreamOfInt32(0);
for (int path = shape.GetFirstPath(geometry); path != -1; path = shape.GetNextPath(path))
{
for (int vertex = shape.GetFirstVertex(path); vertex != -1; vertex = shape.GetNextVertex(vertex))
{
if (vertex != shape.GetLastVertex(path))
{
vertex_handles.Add(vertex);
}
}
}
double[] t = new double[1];
for (int i = 0; i < vertex_handles.Size(); i++)
{
int vertex = vertex_handles.Read(i);
t[0] = 0.5;
shape.SplitSegment(vertex, t, 1);
}
com.esri.core.geometry.Polyline chopped_polyline = (com.esri.core.geometry.Polyline)shape.GetGeometry(geometry);
NUnit.Framework.Assert.IsTrue(chopped_polyline.GetPointCount() == 18);
double att_ = 4;
for (int i_1 = 0; i_1 < 18; i_1++)
{
double att = chopped_polyline.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.Z, i_1, 0);
NUnit.Framework.Assert.IsTrue(att == att_);
att_ += 2;
}
}
{
// Test attribute splitting 2
com.esri.core.geometry.Polyline line1 = new com.esri.core.geometry.Polyline();
com.esri.core.geometry.Polyline line2 = new com.esri.core.geometry.Polyline();
line1.AddAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
line2.AddAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
line1.StartPath(0, 0);
line1.LineTo(10, 10);
line2.StartPath(10, 0);
line2.LineTo(0, 10);
line1.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0, 7);
line1.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0, 17);
line2.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0, 5);
line2.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0, 15);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int g1 = shape.AddGeometry(line1);
int g2 = shape.AddGeometry(line2);
com.esri.core.geometry.CrackAndCluster.Execute(shape, 0.001, null, true);
com.esri.core.geometry.Polyline chopped_line1 = (com.esri.core.geometry.Polyline)shape.GetGeometry(g1);
com.esri.core.geometry.Polyline chopped_line2 = (com.esri.core.geometry.Polyline)shape.GetGeometry(g2);
double att1 = chopped_line1.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0);
double att2 = chopped_line2.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0);
NUnit.Framework.Assert.IsTrue(att1 == 12);
NUnit.Framework.Assert.IsTrue(att2 == 10);
}
{
// Test attribute splitting 3
com.esri.core.geometry.Polygon polygon = new com.esri.core.geometry.Polygon();
polygon.AddAttribute(com.esri.core.geometry.VertexDescription.Semantics.M);
polygon.StartPath(0, 0);
polygon.LineTo(0, 10);
polygon.LineTo(10, 10);
polygon.LineTo(10, 0);
polygon.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0, 7);
polygon.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0, 17);
polygon.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 2, 0, 23);
polygon.SetAttribute(com.esri.core.geometry.VertexDescription.Semantics.M, 3, 0, 43);
com.esri.core.geometry.EditShape shape = new com.esri.core.geometry.EditShape();
int geometry = shape.AddGeometry(polygon);
com.esri.core.geometry.AttributeStreamOfInt32 vertex_handles = new com.esri.core.geometry.AttributeStreamOfInt32(0);
int start_v = shape.GetFirstVertex(shape.GetFirstPath(geometry));
int v = start_v;
do
{
vertex_handles.Add(v);
v = shape.GetNextVertex(v);
}
while (v != start_v);
double[] t = new double[1];
for (int i = 0; i < vertex_handles.Size(); i++)
{
int v1 = vertex_handles.Read(i);
t[0] = 0.5;
shape.SplitSegment(v1, t, 1);
}
com.esri.core.geometry.Polygon cut_polygon = (com.esri.core.geometry.Polygon)shape.GetGeometry(geometry);
NUnit.Framework.Assert.IsTrue(cut_polygon.GetPointCount() == 8);
com.esri.core.geometry.Point2D pt0 = cut_polygon.GetXY(0);
double a0 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 0, 0);
NUnit.Framework.Assert.IsTrue(a0 == 25);
com.esri.core.geometry.Point2D pt1 = cut_polygon.GetXY(1);
double a1 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 1, 0);
NUnit.Framework.Assert.IsTrue(a1 == 7);
com.esri.core.geometry.Point2D pt2 = cut_polygon.GetXY(2);
double a2 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 2, 0);
NUnit.Framework.Assert.IsTrue(a2 == 12);
com.esri.core.geometry.Point2D pt3 = cut_polygon.GetXY(3);
double a3 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 3, 0);
NUnit.Framework.Assert.IsTrue(a3 == 17);
com.esri.core.geometry.Point2D pt4 = cut_polygon.GetXY(4);
double a4 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 4, 0);
NUnit.Framework.Assert.IsTrue(a4 == 20);
com.esri.core.geometry.Point2D pt5 = cut_polygon.GetXY(5);
double a5 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 5, 0);
NUnit.Framework.Assert.IsTrue(a5 == 23);
com.esri.core.geometry.Point2D pt6 = cut_polygon.GetXY(6);
double a6 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 6, 0);
NUnit.Framework.Assert.IsTrue(a6 == 33);
com.esri.core.geometry.Point2D pt7 = cut_polygon.GetXY(7);
double a7 = cut_polygon.GetAttributeAsDbl(com.esri.core.geometry.VertexDescription.Semantics.M, 7, 0);
NUnit.Framework.Assert.IsTrue(a7 == 43);
}
}
