public override async Task <int> Run()
{
try {
YModule m;
await YAPI.RegisterHub(HubURL);
m = YModule.FindModule(Target); // use serial or logical name
if (await m.isOnline())
{
if (!YAPI.CheckLogicalName(LogicalName))
{
WriteLine("Invalid name (" + LogicalName + ")");
return(-1);
}
await m.set_logicalName(LogicalName);
await m.saveToFlash(); // do not forget this
Write("Module: serial= " + await m.get_serialNumber());
WriteLine(" / name= " + await m.get_logicalName());
}
else
{
Write("not connected (check identification and USB cable");
}
} catch (YAPI_Exception ex) {
WriteLine("RegisterHub error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YLightSensor sensor;
if (Target.ToLower() == "any")
{
sensor = YLightSensor.FirstLightSensor();
if (sensor == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
}
else
{
sensor = YLightSensor.FindLightSensor(Target + ".lightSensor");
}
while (await sensor.isOnline())
{
WriteLine("Ambient light: " + await sensor.get_currentValue() + " lx");
await YAPI.Sleep(1000);
}
WriteLine("Module not connected (check identification and USB cable)");
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
static void Main(string[] args)
{
string errmsg = "";
// configure the API to contact any networked device
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (YAPI.RegisterHub("net", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
// each time a new device is connected/discovered
// arrivalCallback will be called.
YAPI.RegisterDeviceArrivalCallback(arrivalCallback);
// each time a device is disconnected/removed
// removalCallback will be called.
YAPI.RegisterDeviceRemovalCallback(removalCallback);
Console.WriteLine("Waiting for hubs to signal themselves...");
while (true)
{
YAPI.UpdateDeviceList(ref errmsg);
YAPI.Sleep(1000, ref errmsg);
showNetwork();
}
}
static void Main(string[] args)
{
string errmsg = "";
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(1);
}
YSensor sensor;
if (args.Length == 0 || args[0] == "any")
{
sensor = YSensor.FirstSensor();
if (sensor == null)
{
Console.WriteLine("No module connected (check USB cable)");
Environment.Exit(1);
}
}
else
{
sensor = YSensor.FindSensor(args[0]);
if (!sensor.isOnline())
{
Console.WriteLine("Sensor " + sensor + " is not connected (check USB cable)");
Environment.Exit(1);
}
}
dumpSensor(sensor);
YAPI.FreeAPI();
Console.WriteLine("Done. Have a nice day :)");
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YSerialPort serialPort;
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (args.Length > 0 && args[0] != "any")
{
target = args[0];
serialPort = YSerialPort.FindSerialPort(target + ".serialPort");
if (!serialPort.isOnline())
{
Console.WriteLine("No module connected (check cable)");
Environment.Exit(0);
}
}
else
{
serialPort = YSerialPort.FirstSerialPort();
if (serialPort == null)
{
Console.WriteLine("No module connected (check USB cable)");
Environment.Exit(0);
}
}
Console.WriteLine("****************************");
Console.WriteLine("* make sure voltage levels *");
Console.WriteLine("* are properly configured *");
Console.WriteLine("****************************");
serialPort.set_serialMode("9600,8N1");
serialPort.set_protocol("Line");
serialPort.reset();
string line;
do
{
YAPI.Sleep(500, ref errmsg);
do
{
line = serialPort.readLine();
if (line != "")
{
Console.WriteLine("Received: " + line);
}
} while (line != "");
Console.WriteLine("Type line to send, or Ctrl-C to exit: ");
line = Console.ReadLine();
serialPort.writeLine(line);
} while (line != "");
YAPI.FreeAPI();
}
/// <summary>Calls RegisterHub. Doesn't call again once it has succeeded once (although Yocto doesn't seem to mind). Returns true on success (or previous success)
/// throwException is used if it fails - if false MessageBox.Show, if true throws exception. There is no silent failure option</summary>
public static bool RegisterYocto(bool throwException)
{
if (g_RegisteredOK)
{
return(true);
}
string error = "";
int result = YAPI.RegisterHub("usb", ref error);
if (result == YAPI.SUCCESS)
{
error = null; // leave field as null for OK (maybe Yocto returns an OK or something in the error)
}
if (error != null)
{
if (throwException)
{
throw new UserException(error);
}
MessageBox.Show(error);
return(false);
}
g_RegisteredOK = true;
return(true);
}
public MedicalCabinet(RfidReader currenRfidReader, string strPortBadgeAndLCD, bool isSchroff = false)
: base(currenRfidReader, strPortBadgeAndLCD)
{
EventThread = new Thread(EventThreadProc)
{
Name = "SmartCabinet event", IsBackground = true
};
EventThread.Start();
if (currenRfidReader.HardwareVersion.StartsWith("13"))
{
this._isSchroff = true;
Rs232Display = new Rs232Module("COM2");
InitLCD();
HideCursor();
if (YAPI.RegisterHub("usb", ref errmsg) == YAPI.SUCCESS)
{
bTempReady = true;
}
else
{
ErrorMessage.ExceptionMessageBox.Show("error init YAPI", null);
}
}
Clock.Interval = 1000;
Clock.Elapsed += Timer_Tick;
Clock.Start();
}
private void button1_Click(object sender, EventArgs e)
{
YModule m;
string errmsg = "";
if (YAPI.RegisterHub("usb", ref errmsg) == YAPI.SUCCESS)
{
notifyIcon1.ShowBalloonTip(5, "PsymonWeather Beta", "Connection effectuée", ToolTipIcon.Info);
timer1.Enabled = true;
btnConnexion.Enabled = false;
btnDeco.Enabled = true;
toolStripStatusLabel1.Text = "Connecté : Oui";
m = YModule.FindModule("PsymonWeather");
lblSerial.Text = m.get_firmwareRelease().ToString();
progressTemp.Minimum = 0;
progressTemp.Maximum = 40;
YTemperature temp = YTemperature.FindTemperature("temperature");
progressTemp.Value = (int)temp.get_currentValue();
lblTemp.Text = string.Format("{0} °C", temp.get_currentValue());
YHumidity humid = YHumidity.FindHumidity("humidity");
lblHumid.Text = string.Format("{0} % d'humidité", humid.get_currentValue());
YPressure pressure = YPressure.FindPressure("pressure");
lblPressure.Text = string.Format("{0} Bar", pressure.get_currentValue());
notifyIcon1.Text = string.Format("PsymonWeather Beta\nTemp. : {0}\nHumid. : {1}\nPress. : {2}", temp.get_currentValue(), humid.get_currentValue(), pressure.get_currentValue());
}
else
{
toolStripStatusLabel1.Text = "Connecté : Erreur";
MessageBox.Show("Le module n'est pas branché.");
}
}
public TempFridgeThreadPT100()
{
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
ErrorMessage.ExceptionMessageBox.Show("Unable to register PT100 Module :" + errmsg, "Information");
}
}
private async void Button_Click(object sender, RoutedEventArgs e)
{
if (!started)
{
string url = this.url.Text;
try {
YAPI.RegisterLogFunction(yoctoLog);
await YAPI.RegisterHub(url);
YAPI.RegisterDeviceArrivalCallback(deviceArrival);
YAPI.RegisterDeviceRemovalCallback(deviceRemoval);
} catch (YAPI_Exception ex) {
Output.Text = "Error:" + ex.Message + "\n";
return;
}
timer = new DispatcherTimer();
timer.Interval = new TimeSpan(0, 0, 0, 0, 100); // 100 Milliseconds
timer.Tick += new EventHandler <object>(Each_Tick);
timer.Start();
initButton.Content = "Stop";
started = true;
}
else
{
timer.Stop();
YAPI.FreeAPI();
initButton.Content = "Start";
started = false;
}
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YVoltage sensor;
YVoltage sensorDC = null;
YVoltage sensorAC = null;
YModule m = null;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
// retreive any voltage sensor (can be AC or DC)
sensor = YVoltage.FirstVoltage();
if (sensor == null)
{
die("No module connected");
}
}
else
{
sensor = YVoltage.FindVoltage(target + ".voltage1");
}
// we need to retreive both DC and AC voltage from the device.
if (sensor.isOnline())
{
m = sensor.get_module();
sensorDC = YVoltage.FindVoltage(m.get_serialNumber() + ".voltage1");
sensorAC = YVoltage.FindVoltage(m.get_serialNumber() + ".voltage2");
}
else
{
die("Module not connected");
}
while (m.isOnline())
{
Console.Write("DC: " + sensorDC.get_currentValue().ToString() + " v ");
Console.Write("AC: " + sensorAC.get_currentValue().ToString() + " v ");
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YGenericSensor sensor;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
sensor = YGenericSensor.FirstGenericSensor();
if (sensor == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
Console.WriteLine("Using: " + sensor.get_module().get_serialNumber());
}
else
{
sensor = YGenericSensor.FindGenericSensor(target + ".genericSensor1");
}
// retreive module serial
string serial = sensor.get_module().get_serialNumber();
// retreive both channels
YGenericSensor ch1 = YGenericSensor.FindGenericSensor(serial + ".genericSensor1");
string unitSensor1 = "";
if (ch1.isOnline())
{
unitSensor1 = ch1.get_unit();
}
while (ch1.isOnline())
{
Console.Write("Value: " + ch1.get_currentValue().ToString() + unitSensor1);
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YCurrentLoopOutput loop;
double value;
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (args.Length < 2)
{
usage();
}
target = args[0].ToUpper();
value = Convert.ToDouble(args[1]);
if (target == "ANY")
{
loop = YCurrentLoopOutput.FirstCurrentLoopOutput();
if (loop == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
}
else
{
loop = YCurrentLoopOutput.FindCurrentLoopOutput(target + ".currentLoopOutput");
}
if (loop.isOnline())
{
loop.set_current(value);
int loopPower = loop.get_loopPower();
if (loopPower == YCurrentLoopOutput.LOOPPOWER_NOPWR)
{
Console.WriteLine("Current loop not powered");
Environment.Exit(0);
}
if (loopPower == YCurrentLoopOutput.LOOPPOWER_LOWPWR)
{
Console.WriteLine("Insufficient voltage on current loop");
Environment.Exit(0);
}
Console.WriteLine("current loop set to " + value.ToString() + " mA");
}
else
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
}
YAPI.FreeAPI();
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YWeighScale sensor;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
sensor = YWeighScale.FirstWeighScale();
if (sensor == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
Console.WriteLine("Using: " + sensor.get_module().get_serialNumber());
}
else
{
sensor = YWeighScale.FindWeighScale(target + ".weighScale1");
}
if (sensor.isOnline())
{
string unit = "";
// On startup, enable excitation and tare weigh scale
Console.WriteLine("Resetting tare weight...");
sensor.set_excitation(YWeighScale.EXCITATION_AC);
YAPI.Sleep(3000, ref errmsg);
sensor.tare();
unit = sensor.get_unit();
// Show measured weight continuously
while (sensor.isOnline())
{
Console.Write("Weight : " + sensor.get_currentValue().ToString() + unit);
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
}
YAPI.FreeAPI();
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YTemperature tsensor;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
tsensor = YTemperature.FirstTemperature();
if (tsensor == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
Console.WriteLine("Using: " + tsensor.get_module().get_serialNumber());
}
else
{
tsensor = YTemperature.FindTemperature(target + ".temperature1");
}
// retreive module serial
string serial = tsensor.get_module().get_serialNumber();
// retreive both channels
YTemperature ch1 = YTemperature.FindTemperature(serial + ".temperature1");
YTemperature ch2 = YTemperature.FindTemperature(serial + ".temperature2");
if (!ch2.isOnline())
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
Environment.Exit(0);
}
while (ch2.isOnline())
{
Console.Write("Ambiant: " + ch1.get_currentValue().ToString() + " °C ");
Console.Write("Infrared: " + ch2.get_currentValue().ToString() + " °C ");
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YSerialPort serialPort;
if (Target.ToLower() == "any")
{
serialPort = YSerialPort.FirstSerialPort();
if (serialPort == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
YModule ymod = await serialPort.get_module();
WriteLine("Using: " + await ymod.get_serialNumber());
}
else
{
serialPort = YSerialPort.FindSerialPort(Target + ".serialPort");
}
await serialPort.set_serialMode("9600,8N1");
await serialPort.set_protocol("Line");
await serialPort.reset();
string line;
do
{
if (ToSend != "")
{
await serialPort.writeLine(ToSend);
ToSend = "";
}
await YAPI.Sleep(500);
do
{
line = await serialPort.readLine();
if (line != "")
{
WriteLine("Received: " + line);
}
} while (line != "");
} while (line != "");
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YGps gps;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
gps = YGps.FirstGps();
if (gps == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
}
else
{
gps = YGps.FindGps(target + ".gps");
}
if (!gps.isOnline())
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
Environment.Exit(0);
}
while (gps.isOnline())
{
if (gps.get_isFixed() != YGps.ISFIXED_TRUE)
{
Console.WriteLine("fixing... ");
}
else
{
Console.WriteLine(gps.get_latitude() + " " + gps.get_longitude());
}
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
}
static void Main(string[] args)
{
Console.WriteLine("Console dotNET Application 0.1.0");
Console.WriteLine("--------------------------------");
Console.WriteLine("");
Console.WriteLine("Using Yoctopuce lib " + YAPI.GetAPIVersion());
string errsmg = "";
if (YAPI.RegisterHub("usb", ref errsmg) != YAPI.SUCCESS)
{
Console.WriteLine("Unable to register the USB port :" + errsmg);
return;
}
YSensor sensor = YSensor.FirstSensor();
if (sensor == null)
{
Console.WriteLine("No Yoctopuce sensor find on USB.");
return;
}
YDisplay display = YDisplay.FirstDisplay();
if (display == null)
{
Console.WriteLine("No Yoctopuce display find on USB.");
return;
}
// display clean up
display.resetAll();
YDisplayLayer l1 = display.get_displayLayer(1);
l1.hide(); // L1 is hidden, l2 stay visible
int w = display.get_displayWidth();
int h = display.get_displayHeight();
while (sensor.isOnline() && display.isOnline())
{
string value = sensor.get_currentValue() + " " + sensor.get_unit();
string name = sensor.get_friendlyName();
// display a text in the middle of the screen
l1.clear();
l1.selectFont("Large.yfm");
l1.drawText(w / 2, h / 2, YDisplayLayer.ALIGN.CENTER, value);
l1.selectFont("Small.yfm");
l1.drawText(w - 1, h - 1, YDisplayLayer.ALIGN.BOTTOM_RIGHT, name);
display.swapLayerContent(0, 1);
Console.WriteLine(name + " ->" + value);
YAPI.Sleep(500, ref errsmg);
}
YAPI.FreeAPI();
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YMotor motor;
YCurrent current;
YVoltage voltage;
YTemperature temperature;
if (Target.ToLower() == "any")
{
// find the serial# of the first available motor
motor = YMotor.FirstMotor();
if (motor == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
Target = await(await motor.get_module()).get_serialNumber();
}
int power = Convert.ToInt32(Power);
motor = YMotor.FindMotor(Target + ".motor");
current = YCurrent.FindCurrent(Target + ".current");
voltage = YVoltage.FindVoltage(Target + ".voltage");
temperature = YTemperature.FindTemperature(Target + ".temperature");
// lets start the motor
if (await motor.isOnline())
{
// if motor is in error state, reset it.
if (await motor.get_motorStatus() >= YMotor.MOTORSTATUS_LOVOLT)
{
await motor.resetStatus();
}
await motor.drivingForceMove(power, 2000); // ramp up to power in 2 seconds
while (await motor.isOnline())
{
// display motor status
WriteLine("Status=" + await motor.get_advertisedValue() + " "
+ "Voltage=" + await voltage.get_currentValue() + "V "
+ "Current=" + await current.get_currentValue() / 1000 + "A "
+ "Temp=" + await temperature.get_currentValue() + "deg C");
await YAPI.Sleep(1000); // wait for one second
}
}
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YPwmOutput pwmoutput1;
YPwmOutput pwmoutput2;
int frequency;
double dutyCycle;
frequency = Convert.ToInt32(RequestedFrequency);
dutyCycle = Convert.ToDouble(RequestedDutyCycle);
if (Target.ToLower() == "any")
{
pwmoutput1 = YPwmOutput.FirstPwmOutput();
if (pwmoutput1 == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
Target = await(await pwmoutput1.get_module()).get_serialNumber();
}
pwmoutput1 = YPwmOutput.FindPwmOutput(Target + ".pwmOutput1");
pwmoutput2 = YPwmOutput.FindPwmOutput(Target + ".pwmOutput2");
if (await pwmoutput1.isOnline())
{
// output 1 : immediate change
await pwmoutput1.set_frequency(frequency);
await pwmoutput1.set_enabled(YPwmOutput.ENABLED_TRUE);
await pwmoutput1.set_dutyCycle(dutyCycle);
// output 2 : smooth change
await pwmoutput2.set_frequency(frequency);
await pwmoutput2.set_enabled(YPwmOutput.ENABLED_TRUE);
await pwmoutput2.dutyCycleMove(dutyCycle, 3000);
WriteLine("done");
}
else
{
WriteLine("Module not connected (check identification and USB cable)");
}
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YWatchdog watchdog;
string state;
if (args.Length < 2)
{
usage();
}
target = args[0].ToUpper();
state = args[1].ToUpper();
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
watchdog = YWatchdog.FirstWatchdog();
if (watchdog == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
}
else
{
watchdog = YWatchdog.FindWatchdog(target + ".watchdog1");
}
if (watchdog.isOnline())
{
if (state == "ON")
{
watchdog.set_running(YWatchdog.RUNNING_ON);
}
if (state == "OFF")
{
watchdog.set_running(YWatchdog.RUNNING_OFF);
}
if (state == "RESET")
{
watchdog.resetWatchdog();
}
}
else
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
}
YAPI.FreeAPI();
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YGenericSensor tsensor;
if (Target.ToLower() == "any")
{
tsensor = YGenericSensor.FirstGenericSensor();
if (tsensor == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
YModule m = await tsensor.get_module();
Target = await m.get_serialNumber();
}
// retreive module serial
WriteLine("Using: " + Target);
// retreive both channels
YGenericSensor ch1, ch2;
ch1 = YGenericSensor.FindGenericSensor(Target + ".genericSensor1");
ch2 = YGenericSensor.FindGenericSensor(Target + ".genericSensor2");
string unitSensor1 = "", unitSensor2 = "";
if (await ch1.isOnline())
{
unitSensor1 = await ch1.get_unit();
}
if (await ch2.isOnline())
{
unitSensor2 = await ch2.get_unit();
}
while (await ch1.isOnline() && await ch2.isOnline())
{
Write("Channel 1 : " + await ch1.get_currentValue() + unitSensor1);
Write(" Channel 2 : " + await ch2.get_currentValue() + unitSensor2);
WriteLine(" (press Ctrl-C to exit)");
await YAPI.Sleep(1000);
}
WriteLine("Module not connected (check identification and USB cable)");
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
public static bool RegisterHub()
{
String errorMessage = null;
if (YAPI.RegisterHub("usb", ref errorMessage) != YAPI.SUCCESS)
{
throw new Exception("Could not register hub: " + errorMessage);
}
return(true);
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YPwmOutput pwmoutput1;
YPwmOutput pwmoutput2;
int frequency;
double dutyCycle;
if (args.Length < 3)
{
usage();
}
target = args[0].ToUpper();
frequency = Convert.ToInt32(args[1]);
dutyCycle = Convert.ToDouble(args[2]);
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
pwmoutput1 = YPwmOutput.FirstPwmOutput();
if (pwmoutput1 == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
target = pwmoutput1.get_module().get_serialNumber();
}
pwmoutput1 = YPwmOutput.FindPwmOutput(target + ".pwmOutput1");
pwmoutput2 = YPwmOutput.FindPwmOutput(target + ".pwmOutput2");
if (pwmoutput1.isOnline())
{
// output 1 : immediate change
pwmoutput1.set_frequency(frequency);
pwmoutput1.set_enabled(YPwmOutput.ENABLED_TRUE);
pwmoutput1.set_dutyCycle(dutyCycle);
// output 2 : smooth change
pwmoutput2.set_frequency(frequency);
pwmoutput2.set_enabled(YPwmOutput.ENABLED_TRUE);
pwmoutput2.dutyCycleMove(dutyCycle, 3000);
}
else
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
}
YAPI.FreeAPI();
}
static void Main(string[] args)
{
int i;
List <string> hubs = new List <string>();
List <string> shield = new List <string>();
List <string> devices = new List <string>();
string errmsg = "";
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error : " + errmsg);
Environment.Exit(0);
}
for (i = 0; i < args.Length; i++)
{
Console.WriteLine("Update module connected to hub " + args[i]);
if (YAPI.RegisterHub(args[i], ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(1);
}
}
//fist step construct the list of all hub /shield and devices connected
YModule module = YModule.FirstModule();
while (module != null)
{
string product = module.get_productName();
string serial = module.get_serialNumber();
if (product == "YoctoHub-Shield")
{
shield.Add(serial);
}
else if (product.StartsWith("YoctoHub"))
{
hubs.Add(serial);
}
else if (product != "VirtualHub")
{
devices.Add(serial);
}
module = module.nextModule();
}
// fist upgrades all Hubs...
upgradeSerialList(hubs);
// ... then all shield..
upgradeSerialList(shield);
// ... and finaly all devices
upgradeSerialList(devices);
Console.WriteLine("All devices are now up to date");
YAPI.FreeAPI();
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YRangeFinder rf;
YLightSensor ir;
YTemperature tmp;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
rf = YRangeFinder.FirstRangeFinder();
if (rf == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
target = rf.get_module().get_serialNumber();
}
else
{
rf = YRangeFinder.FindRangeFinder(target + ".rangefinder1");
}
if (!rf.isOnline())
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
Environment.Exit(0);
}
ir = YLightSensor.FindLightSensor(target + ".lightSensor1");
tmp = YTemperature.FindTemperature(target + ".temperature1");
while (rf.isOnline())
{
Console.WriteLine("Distance : " + rf.get_currentValue().ToString());
Console.WriteLine("Ambiant IR : " + ir.get_currentValue().ToString());
Console.WriteLine("Temperature : " + tmp.get_currentValue().ToString());
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YAnButton input1;
YAnButton input5;
if (Target.ToLower() == "any")
{
input1 = YAnButton.FirstAnButton();
if (input1 == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
Target = await(await input1.get_module()).get_serialNumber();
}
input1 = YAnButton.FindAnButton(Target + ".anButton1");
input5 = YAnButton.FindAnButton(Target + ".anButton5");
while (await input1.isOnline())
{
if (await input1.get_isPressed() == YAnButton.ISPRESSED_TRUE)
{
Write("Button 1: pressed ");
}
else
{
Write("Button 1: not pressed ");
}
WriteLine("- analog value: " + await input1.get_calibratedValue());
if (await input5.get_isPressed() == YAnButton.ISPRESSED_TRUE)
{
Write("Button 5: pressed ");
}
else
{
Write("Button 5: not pressed ");
}
WriteLine("- analog value: " + await input5.get_calibratedValue());
await YAPI.Sleep(1000);
}
WriteLine("Module not connected (check identification and USB cable)");
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
public override async Task <int> Run()
{
try {
await YAPI.RegisterHub(HubURL);
YColorLed led1;
int color;
ColorStr = ColorStr.ToUpper();
if (ColorStr == "RED")
{
color = 0xFF0000;
}
else if (ColorStr == "GREEN")
{
color = 0x00FF00;
}
else if (ColorStr == "BLUE")
{
color = 0x0000FF;
}
else
{
color = Convert.ToInt32("0x" + ColorStr, 16);
}
if (Target.ToLower() == "any")
{
led1 = YColorLed.FirstColorLed();
if (led1 == null)
{
WriteLine("No module connected (check USB cable) ");
return(-1);
}
}
else
{
led1 = YColorLed.FindColorLed(Target + ".colorLed1");
}
if (await led1.isOnline())
{
WriteLine("smooth transition to " + color.ToString("x"));
await led1.rgbMove(color, 1000);
}
else
{
WriteLine("Module not connected (check identification and USB cable)");
}
} catch (YAPI_Exception ex) {
WriteLine("error: " + ex.Message);
}
YAPI.FreeAPI();
return(0);
}
static void Main(string[] args)
{
YModule m;
string errmsg = "";
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (args.Length < 1)
{
usage();
}
m = YModule.FindModule(args[0]); // use serial or logical name
if (m.isOnline())
{
if (args.Length >= 2)
{
if (args[1].ToUpper() == "ON")
{
m.set_beacon(YModule.BEACON_ON);
}
if (args[1].ToUpper() == "OFF")
{
m.set_beacon(YModule.BEACON_OFF);
}
}
Console.WriteLine("serial: " + m.get_serialNumber());
Console.WriteLine("logical name: " + m.get_logicalName());
Console.WriteLine("luminosity: " + m.get_luminosity().ToString());
Console.Write("beacon: ");
if (m.get_beacon() == YModule.BEACON_ON)
{
Console.WriteLine("ON");
}
else
{
Console.WriteLine("OFF");
}
Console.WriteLine("upTime: " + (m.get_upTime() / 1000).ToString() + " sec");
Console.WriteLine("USB current: " + m.get_usbCurrent().ToString() + " mA");
Console.WriteLine("Logs:\r\n" + m.get_lastLogs());
}
else
{
Console.WriteLine(args[0] + " not connected (check identification and USB cable)");
}
YAPI.FreeAPI();
}
static void Main(string[] args)
{
string errmsg = "";
string target;
YLightSensor ir, al;
YProximity p;
if (args.Length < 1)
{
usage();
}
target = args[0].ToUpper();
// Setup the API to use local USB devices
if (YAPI.RegisterHub("usb", ref errmsg) != YAPI.SUCCESS)
{
Console.WriteLine("RegisterHub error: " + errmsg);
Environment.Exit(0);
}
if (target == "ANY")
{
p = YProximity.FirstProximity();
if (p == null)
{
Console.WriteLine("No module connected (check USB cable) ");
Environment.Exit(0);
}
target = p.get_module().get_serialNumber();
}
else
{
p = YProximity.FindProximity(target + ".proximity1");
}
if (!p.isOnline())
{
Console.WriteLine("Module not connected");
Console.WriteLine("check identification and USB cable");
Environment.Exit(0);
}
al = YLightSensor.FindLightSensor(target + ".lightSensor1");
ir = YLightSensor.FindLightSensor(target + ".lightSensor2");
while (p.isOnline())
{
Console.Write(" Proximity: " + p.get_currentValue().ToString());
Console.Write(" Ambiant: " + al.get_currentValue().ToString());
Console.Write(" IR: " + ir.get_currentValue().ToString());
Console.WriteLine(" (press Ctrl-C to exit)");
YAPI.Sleep(1000, ref errmsg);
}
YAPI.FreeAPI();
}