public ViewsCEPRRequest(UIApplication uiApp, String text)
{
MainUI uiForm = BARevitTools.Application.thisApp.newMainUi;
UIDocument uidoc = uiApp.ActiveUIDocument;
//Collect the ViewTypes in the project
FilteredElementCollector viewTypesCollector = new FilteredElementCollector(uidoc.Document);
ICollection <Element> viewTypes = viewTypesCollector.OfClass(typeof(ViewFamilyType)).ToElements();
ElementId viewTypeId = null;
//Cycle through the ViewType elements to find the one with a type name equal to the one selected in the MainUI's combobox
foreach (ViewFamilyType viewType in viewTypes)
{
if (viewType.get_Parameter(BuiltInParameter.ALL_MODEL_TYPE_NAME).AsString() == uiForm.viewsCEPRElevationComboBox.Text)
{
viewTypeId = viewType.Id;
}
}
//If the ViewType was found, and the active view is a plan view, continue
if (viewTypeId != null && uidoc.ActiveView.GetType().ToString() == "Autodesk.Revit.DB.ViewPlan")
{
//Invoke a room selection
List <Room> selectedRoomElements = RVTOperations.SelectRoomElements(uiApp);
//If the user selected rooms, continue
if (selectedRoomElements != null)
{
try
{
//Cycle through each selected room
foreach (Room room in selectedRoomElements)
{
//First, get the room number for use in generating the elevation view names
string roomNumber = room.Number;
string roomName = room.get_Parameter(BuiltInParameter.ROOM_NAME).AsString().ToUpper();
//Get the geometry of the room
Options geomOptions = new Options();
geomOptions.IncludeNonVisibleObjects = true;
GeometryElement geomElements = room.get_Geometry(geomOptions);
//Get the location point of the room as a point for where to place the elevation marker
LocationPoint roomLocation = room.Location as LocationPoint;
XYZ point = roomLocation.Point;
//Start a transaction
Transaction t1 = new Transaction(uidoc.Document, "Create Elevations Per Room");
t1.Start();
try
{
//Make a new ElevationMarker that uses the ViewType earlier, the location point of the room, and has a view scale of 1/8"
ElevationMarker newMarker = ElevationMarker.CreateElevationMarker(uidoc.Document, viewTypeId, point, 96);
//Start making views going around the elevation marker where the indexes start on the west side and go clockwise
ViewSection view0 = newMarker.CreateElevation(uidoc.Document, uidoc.ActiveView.Id, 0);
//Set the view name equal to the room number + room name + plus orientation
view0.Name = roomNumber + " " + roomName + " WEST";
view0.CropBoxActive = true;
//Repeat for the other view directions at their appropriate index
ViewSection view1 = newMarker.CreateElevation(uidoc.Document, uidoc.ActiveView.Id, 1);
view1.Name = roomNumber + " " + roomName + " NORTH";
view1.CropBoxActive = true;
ViewSection view2 = newMarker.CreateElevation(uidoc.Document, uidoc.ActiveView.Id, 2);
view2.Name = roomNumber + " " + roomName + " EAST";
view2.CropBoxActive = true;
ViewSection view3 = newMarker.CreateElevation(uidoc.Document, uidoc.ActiveView.Id, 3);
view3.Name = roomNumber + " " + roomName + " SOUTH";
view3.CropBoxActive = true;
//Make a Solid object for assignment
Solid roomSolid = null;
//The following section is dedicated to cropping the elevation views to the cross-section of the room geometry
if (uiForm.viewsCEPRCropCheckBox.Checked == true)
{
//Cycle through the geometry elements associated with the room geometry until the solid is found
foreach (GeometryObject geom in geomElements)
{
if (geom.GetType().ToString() == "Autodesk.Revit.DB.Solid")
{
roomSolid = geom as Solid;
break;
}
}
//Generate 4 planes at the room point that will correspond to each elevation view's cross section of the room geometry
// Each plane's normal vector is in the direction their view is facing
Plane westPlane = Plane.CreateByNormalAndOrigin(new XYZ(-1, 0, 0), point); //-X vector for West
Plane northPlane = Plane.CreateByNormalAndOrigin(new XYZ(0, 1, 0), point); //+Y vector for North
Plane eastPlane = Plane.CreateByNormalAndOrigin(new XYZ(1, 0, 0), point); //+X vector for East
Plane southPlane = Plane.CreateByNormalAndOrigin(new XYZ(0, -1, 0), point); //-Y vector for South
//Use the room section's perimeter as the crop boundary if the first index of the MainUI combobox is selected
if (uiForm.viewsCEPRCropMethodComboBox.SelectedIndex == 0)
{
try
{
//Generate some CurveLoop lists for use later
IList <CurveLoop> westCurveLoopsFitted = null;
IList <CurveLoop> northCurveLoopsFitted = null;
IList <CurveLoop> southCurveLoopsFitted = null;
IList <CurveLoop> eastCurveLoopsFitted = null;
//Slice the room solid with the westPlane object made earlier. This will result in a solid boolean result to the west of the plane because the positive side of the plane faces west
Solid westBooleanSolid = BooleanOperationsUtils.CutWithHalfSpace(roomSolid, westPlane);
//Grab the faces of the solid that resulted from the boolean
FaceArray westBoolSolidFaces = westBooleanSolid.Faces;
//Cycle through each face and get the normal vector
foreach (PlanarFace westFace in westBoolSolidFaces)
{
//For the west elevation face to use as the crop boundary, we need the face that has a vector going east, or the +X vector
XYZ westFaceNormal = westFace.FaceNormal;
if (westFaceNormal.X == 1)
{
//Get the edges as a CurveLoops once the face is found, then jump out of the loop thorugh the faces
westCurveLoopsFitted = westFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the north elevation
Solid northBooleanSolid = BooleanOperationsUtils.CutWithHalfSpace(roomSolid, northPlane);
FaceArray northBoolSolidFaces = northBooleanSolid.Faces;
foreach (PlanarFace northFace in northBoolSolidFaces)
{
XYZ northFaceNormal = northFace.FaceNormal;
if (northFaceNormal.Y == -1)
{
northCurveLoopsFitted = northFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the east elevation
Solid eastBooleanSolid = BooleanOperationsUtils.CutWithHalfSpace(roomSolid, eastPlane);
FaceArray eastBoolSolidFaces = eastBooleanSolid.Faces;
foreach (PlanarFace eastFace in eastBoolSolidFaces)
{
XYZ eastFaceNormal = eastFace.FaceNormal;
if (eastFaceNormal.X == -1)
{
eastCurveLoopsFitted = eastFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the south elevation
Solid southBooleanSolid = BooleanOperationsUtils.CutWithHalfSpace(roomSolid, southPlane);
FaceArray southBoolSolidFaces = southBooleanSolid.Faces;
foreach (PlanarFace southFace in southBoolSolidFaces)
{
XYZ southFaceNormal = southFace.FaceNormal;
if (southFaceNormal.Y == 1)
{
southCurveLoopsFitted = southFace.GetEdgesAsCurveLoops();
break;
}
}
//To get the CurveLoop fitted 0.5" offset to the boundary of the face retrieved, create a CurveLoop via an offset
//Now, the original curve loop was drawn on a plane with a +X axis vector normal, so the offset must be made in the positive X axis plane as well
CurveLoop offsetWestCurveLoopFitted = CurveLoop.CreateViaOffset(westCurveLoopsFitted[0], (0.5d / 12), XYZ.BasisX);
ViewCropRegionShapeManager westCropRegionShapeManager = view0.GetCropRegionShapeManager();
westCropRegionShapeManager.SetCropShape(offsetWestCurveLoopFitted);
//Repeat for the north CurveLoop
//Note that because the plane has a -Y vector, the offset needs to be negative too
CurveLoop offsetNorthCurveLoopFitted = CurveLoop.CreateViaOffset(northCurveLoopsFitted[0], -(0.5d / 12), XYZ.BasisY);;
ViewCropRegionShapeManager northCropRegionShapeManager = view1.GetCropRegionShapeManager();
northCropRegionShapeManager.SetCropShape(offsetNorthCurveLoopFitted);
//Repeat for the east CurveLoop
CurveLoop offsetEastCurveLoopFitted = CurveLoop.CreateViaOffset(eastCurveLoopsFitted[0], -(0.5d / 12), XYZ.BasisX);;
ViewCropRegionShapeManager eastCropRegionShapeManager = view2.GetCropRegionShapeManager();
eastCropRegionShapeManager.SetCropShape(offsetEastCurveLoopFitted);
//Repeat for the south CurveLoop
CurveLoop offsetSouthCurveLoopFitted = CurveLoop.CreateViaOffset(southCurveLoopsFitted[0], (0.5d / 12), XYZ.BasisY);;
ViewCropRegionShapeManager southCropRegionShapeManager = view3.GetCropRegionShapeManager();
southCropRegionShapeManager.SetCropShape(offsetSouthCurveLoopFitted);
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
//Use the room section's rectangular extents as the crop boundary if the second index was selected for the MainUI combobox
if (uiForm.viewsCEPRCropMethodComboBox.SelectedIndex == 1)
{
try
{
//Create some CurveLoop lists to use later
IList <CurveLoop> westCurveLoopsRectangular = null;
IList <CurveLoop> northCurveLoopsRectangular = null;
IList <CurveLoop> southCurveLoopsRectangular = null;
IList <CurveLoop> eastCurveLoopsRectangular = null;
//To get a rectangular cross section of a non-rectangular room cross section, we need to generate a bounding box for the room, then make a solid from the bounding box
//Get the bounding box of the room
BoundingBoxXYZ roomBBox = roomSolid.GetBoundingBox();
//Use the minimum and maximum points of the bounding box to get the 4 points along the bottom of the bounding box
XYZ pt0 = new XYZ(roomBBox.Min.X, roomBBox.Min.Y, roomBBox.Min.Z);
XYZ pt1 = new XYZ(roomBBox.Max.X, roomBBox.Min.Y, roomBBox.Min.Z);
XYZ pt2 = new XYZ(roomBBox.Max.X, roomBBox.Max.Y, roomBBox.Min.Z);
XYZ pt3 = new XYZ(roomBBox.Min.X, roomBBox.Max.Y, roomBBox.Min.Z);
//Generate perimeter lines for the bottom of the bounding box points
Line edge0 = Line.CreateBound(pt0, pt1);
Line edge1 = Line.CreateBound(pt1, pt2);
Line edge2 = Line.CreateBound(pt2, pt3);
Line edge3 = Line.CreateBound(pt3, pt0);
//Make a list of curves out of the edges
List <Curve> edges = new List <Curve>();
edges.Add(edge0);
edges.Add(edge1);
edges.Add(edge2);
edges.Add(edge3);
//Use the curves to make a CurveLoop list
List <CurveLoop> loops = new List <CurveLoop>();
loops.Add(CurveLoop.Create(edges));
//Generate a solid from an extrusion that uses the CurveLoops extruded upward a height equal to the the height of the bounding box
Solid initialSolidBBox = GeometryCreationUtilities.CreateExtrusionGeometry(loops, XYZ.BasisZ, (roomBBox.Max.Z - roomBBox.Min.Z));
//Create a transformed solid box from the previously created box moved to where the room bounding box is located
Solid roomSolidBBox = SolidUtils.CreateTransformed(initialSolidBBox, roomBBox.Transform);
//Cut the solid box with the west plane created earlier and get the faces
Solid westBooleanSolidBBox = BooleanOperationsUtils.CutWithHalfSpace(roomSolidBBox, westPlane);
FaceArray westBoolSolidFacesBBox = westBooleanSolidBBox.Faces;
foreach (PlanarFace westFace in westBoolSolidFacesBBox)
{
//As with the earlier code for a fitted crop, get the face with a positive X normal
XYZ westFaceNormal = westFace.FaceNormal;
if (westFaceNormal.X == 1)
{
//Obtain the edges of the face
westCurveLoopsRectangular = westFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the north face
Solid northBooleanSolidBBox = BooleanOperationsUtils.CutWithHalfSpace(roomSolidBBox, northPlane);
FaceArray northBoolSolidFacesBBox = northBooleanSolidBBox.Faces;
foreach (PlanarFace northFace in northBoolSolidFacesBBox)
{
XYZ northFaceNormal = northFace.FaceNormal;
if (northFaceNormal.Y == -1)
{
northCurveLoopsRectangular = northFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the east face
Solid eastBooleanSolidBBox = BooleanOperationsUtils.CutWithHalfSpace(roomSolidBBox, eastPlane);
FaceArray eastBoolSolidFacesBBox = eastBooleanSolidBBox.Faces;
foreach (PlanarFace eastFace in eastBoolSolidFacesBBox)
{
XYZ eastFaceNormal = eastFace.FaceNormal;
if (eastFaceNormal.X == -1)
{
eastCurveLoopsRectangular = eastFace.GetEdgesAsCurveLoops();
break;
}
}
//Repeat for the south face
Solid southBooleanSolidBBox = BooleanOperationsUtils.CutWithHalfSpace(roomSolidBBox, southPlane);
FaceArray southBoolSolidFacesBBox = southBooleanSolidBBox.Faces;
foreach (PlanarFace southFace in southBoolSolidFacesBBox)
{
XYZ southFaceNormal = southFace.FaceNormal;
if (southFaceNormal.Y == 1)
{
southCurveLoopsRectangular = southFace.GetEdgesAsCurveLoops();
break;
}
}
//As before, get the offset curve from the original curve, but offset by 1'
CurveLoop offsetWestCurveLoopRectangular = CurveLoop.CreateViaOffset(westCurveLoopsRectangular[0], 1, XYZ.BasisX);
ViewCropRegionShapeManager westCropRegionShapeManager = view0.GetCropRegionShapeManager();
westCropRegionShapeManager.SetCropShape(offsetWestCurveLoopRectangular);
//As with the fitted offset curve, the offset for a curve in a plane with a negative vector must also be negative
CurveLoop offsetNorthCurveLoopRectangular = CurveLoop.CreateViaOffset(northCurveLoopsRectangular[0], -1, XYZ.BasisY);
ViewCropRegionShapeManager northCropRegionShapeManager = view1.GetCropRegionShapeManager();
northCropRegionShapeManager.SetCropShape(offsetNorthCurveLoopRectangular);
CurveLoop offsetEastCurveLoopRectangular = CurveLoop.CreateViaOffset(eastCurveLoopsRectangular[0], -1, XYZ.BasisX);
ViewCropRegionShapeManager eastCropRegionShapeManager = view2.GetCropRegionShapeManager();
eastCropRegionShapeManager.SetCropShape(offsetEastCurveLoopRectangular);
CurveLoop offsetSouthCurveLoopRectangular = CurveLoop.CreateViaOffset(southCurveLoopsRectangular[0], 1, XYZ.BasisY);
ViewCropRegionShapeManager southCropRegionShapeManager = view3.GetCropRegionShapeManager();
southCropRegionShapeManager.SetCropShape(offsetSouthCurveLoopRectangular);
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
//If the user opted to override the crop boundary of the elevations, continue as follows
if (uiForm.viewsCEPROverrideCheckBox.Checked == true)
{
//Make a new OverrideGraphicsSetting to use in the boundary override
OverrideGraphicSettings orgs = new OverrideGraphicSettings();
//Use the solid line pattern
orgs.SetProjectionLinePatternId(LinePatternElement.GetSolidPatternId());
//Set the line weight to the properties value
orgs.SetProjectionLineWeight(Properties.Settings.Default.RevitOverrideInteriorCropWeight);
//Grab all of the viewers, which are the viewport windows, and cycle through them
var viewers = new FilteredElementCollector(uidoc.Document).OfCategory(BuiltInCategory.OST_Viewers);
foreach (Element viewer in viewers)
{
//Get the parameters for the viewer
ParameterSet parameters = viewer.Parameters;
foreach (Parameter parameter in parameters)
{
//Get the View Name parameter
if (parameter.Definition.Name.ToString() == "View Name")
{
string viewName = parameter.AsString();
//If the view's view name is the same as the west elvation, continue
if (viewName == view0.Name)
{
//Set the view's override setting using the viewer and the OverrideGraphicsSettings
Autodesk.Revit.DB.View viewtouse = view0 as Autodesk.Revit.DB.View;
viewtouse.SetElementOverrides(viewer.Id, orgs);
}
//Continue to evaluate for the other view names
else if (viewName == view1.Name)
{
Autodesk.Revit.DB.View viewtouse = view1 as Autodesk.Revit.DB.View;
viewtouse.SetElementOverrides(viewer.Id, orgs);
}
else if (viewName == view2.Name)
{
Autodesk.Revit.DB.View viewtouse = view2 as Autodesk.Revit.DB.View;
viewtouse.SetElementOverrides(viewer.Id, orgs);
}
else if (viewName == view3.Name)
{
Autodesk.Revit.DB.View viewtouse = view3 as Autodesk.Revit.DB.View;
viewtouse.SetElementOverrides(viewer.Id, orgs);
}
else
{
//If the view's name is not one of the create elevation views, skip it
continue;
}
}
}
}
}
}
t1.Commit();
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
t1.RollBack();
}
t1.Dispose();
}
}
catch
{
//If the user did not select any room tags or room elements, then report that
MessageBox.Show("No rooms were selected");
}
}
}
else if (uidoc.ActiveView.GetType().ToString() != "Autodesk.Revit.DB.ViewPlan")
{
//If the user tried to run this outside a plan view, report it
MessageBox.Show("Please run from a plan view");
}
else
{
//If the user did not select an elevation type, report it
MessageBox.Show("No elevation type selected");
}
}
/// <summary>
/// 在房间X的中心创建四个方向的立面
/// Create four Elevations on the center of the "X" of the selRoom
/// </summary>
/// <param name="elevationOffset"></param>
/// <param name="FloorThickness"></param>
public void CreateElevations(double elevationOffset, double FloorThickness)
{
int i = 0;//循环用
//获取立面的familytype Get the familyType of Elevation
FilteredElementCollector collector = new FilteredElementCollector(DocSet.doc);
collector.OfClass(typeof(ViewFamilyType));
var viewFamilyTypes = from elem in collector
let type = elem as ViewFamilyType
where type.ViewFamily == ViewFamily.Elevation
select type;
ElementId viewTypeId;
if (viewFamilyTypes.Count() > 0)
{
viewTypeId = viewFamilyTypes.First().Id;
}
else
{
return;
}
using (Transaction tran = new Transaction(DocSet.doc))
{
//房间的"X"的交点
LocationPoint pt = DocSet.selRoom.Location as LocationPoint;
tran.Start("newElvation");
ElevationMarker marker = ElevationMarker.CreateElevationMarker(DocSet.doc, viewTypeId, pt.Point, 50);
for (; i < 4; i++)
{
ViewSection sv = marker.CreateElevation(DocSet.doc, DocSet.doc.ActiveView.Id, i);
//设定立面的 远剪裁偏移
sv.get_Parameter(BuiltInParameter.VIEWER_BOUND_OFFSET_FAR).SetValueString("10000");
//设定每个立面的名称
XYZ normal = null;//法向量
string elevationName = "ELE -";
switch (i)
{
case 0:
elevationName += " West " + _SoANumber;
normal = new XYZ(-1, 0, 0);
sv.get_Parameter(BuiltInParameter.VIEW_DESCRIPTION).Set("ELEVATION WEST");
break;
case 1:
elevationName += " North" + _SoANumber;
normal = new XYZ(0, 1, 0);
sv.get_Parameter(BuiltInParameter.VIEW_DESCRIPTION).Set("ELEVATION NORTH");
break;
case 2:
elevationName += " East" + _SoANumber;
normal = new XYZ(1, 0, 0);
sv.get_Parameter(BuiltInParameter.VIEW_DESCRIPTION).Set("ELEVATION EAST");
break;
case 3:
elevationName += " South" + _SoANumber;
normal = new XYZ(0, -1, 0);
sv.get_Parameter(BuiltInParameter.VIEW_DESCRIPTION).Set("ELEVATION SOUTH");
break;
}
sv.ViewName = elevationName;
//不能删 必须先保存修改才能获取上面的元素
tran.Commit();
tran.Start("change elevation crop shape");
//小指型房间专用修改
if (cbSpRoom.IsChecked == true)
{
if (i == 1 || i == 2)
{
normal = -normal;
}
spRoomElevationChange(sv, elevationOffset, normal, FloorThickness);
}
else
{
//修改立面底边的高度
XYZ pt1 = null;
XYZ pt2 = null;
XYZ pt3 = null;
XYZ pt4 = null;
sv.CropBoxActive = true;
ViewCropRegionShapeManager vcrShanpMgr = sv.GetCropRegionShapeManager();
CurveLoop loop = vcrShanpMgr.GetCropShape().First();
CurveLoopIterator iterator = loop.GetCurveLoopIterator();
//分辨点的位置
while (iterator.MoveNext())
{
Curve curve = iterator.Current;
XYZ pt0 = curve.GetEndPoint(0);
if (-1 < pt0.Z - pt.Point.Z && pt0.Z - pt.Point.Z < 1)
{
if (pt1 == null)
{
pt1 = pt0;
}
else
{
pt2 = pt0;
}
}
else
{
if (pt3 == null)
{
pt3 = pt0;
}
else
{
pt4 = pt0;
}
}
}
//重新生成一个边界框
//TaskDialog.Show("1", pt1.ToString() + "\n" + pt2.ToString() + "\n" + pt3.ToString() + "\n" + pt4.ToString());
pt1 = new XYZ(pt1.X, pt1.Y, pt1.Z + FloorThickness / 300);
pt2 = new XYZ(pt2.X, pt2.Y, pt1.Z);
Line lineBottom = Line.CreateBound(pt1, pt2);
Line lineRight = Line.CreateBound(pt2, pt4);
Line lineTop = Line.CreateBound(pt4, pt3);
Line lineLeft = Line.CreateBound(pt3, pt1);
CurveLoop profile = new CurveLoop();
profile.Append(lineBottom);
profile.Append(lineRight);
profile.Append(lineTop);
profile.Append(lineLeft);
profile = CurveLoop.CreateViaOffset(profile, elevationOffset / 300, -normal);
vcrShanpMgr.SetCropShape(profile);
}
}
tran.Commit();
}
}
