//循环次数少，不需要
#region windows消息(按了关闭键)(重写void接收到信息后触发，要是关闭信息就变成最小化，其他信息就运行base原void)
//protected override void WndProc(ref Message m)
//{
// //关闭消息
// const int WM_SYSCOMMAND = 0x0112;
// const int SC_CLOSE = 0xF060;
// if (m.Msg == WM_SYSCOMMAND && (int)m.WParam == SC_CLOSE)
// {
// // 屏蔽传入的消息事件
// //MessageBox.Show("触发");
// //this.WindowState = FormWindowState.Minimized;
// //简单关闭之后foreach或for要是还在运行会占用串口，要么完全关闭程序要么等待结束再打开
// Environment.Exit(0);
// //base.WndProc(ref m);
// return;
// }
// base.WndProc(ref m);
//}
#endregion
#region 键ESC
//protected override bool ProcessCmdKey(ref System.Windows.Forms.Message msg, System.Windows.Forms.Keys keyData)
//{
// int WM_KEYDOWN = 256;
// int WM_SYSKEYDOWN = 260;
// if (msg.Msg == WM_KEYDOWN | msg.Msg == WM_SYSKEYDOWN)
// {
// switch (keyData)
// {
// case Keys.Escape:
// this.Close();
// break;
// }
// }
// return false;
//}
#endregion
#region 测试功能
private void BtnTest_Send_Click(object sender, EventArgs e)
{
if (Convert.ToInt16(mode) < 10)//单串口个数，双串口十位数
{
if (ChkTest_Writeline.Checked)
{
//SptReceiveOrSend.WriteLine(TxtTest_SendStr.Text);
SptReceiveOrSend.Write(TxtTest_SendStr.Text + "\r\n");
MessageShow(ChkTest_ShowMessage.Checked, "串口1发出" + TxtTest_SendStr.Text.Length + 1 + "字节Byte:\r\n" + TxtTest_SendStr.Text + "\r\n(回车)");
}
else
{
SptReceiveOrSend.Write(TxtTest_SendStr.Text);
MessageShow(ChkTest_ShowMessage.Checked, "串口1发出" + TxtTest_SendStr.Text.Length + "字节Byte:\r\n" + TxtTest_SendStr.Text);
}
}
else
{
if (ChkTest_Writeline.Checked)
{
//SptSend.WriteLine(TxtTest_SendStr.Text);
SptSend.Write(TxtTest_SendStr.Text + "\r\n");
MessageShow(ChkTest_ShowMessage.Checked, "串口2发出" + TxtTest_SendStr.Text.Length + 1 + "字节Byte:\r\n" + TxtTest_SendStr.Text + "\r\n(回车)");
}
else
{
SptSend.Write(TxtTest_SendStr.Text);
MessageShow(ChkTest_ShowMessage.Checked, "串口2发出" + TxtTest_SendStr.Text.Length + "字节Byte:\r\n" + TxtTest_SendStr.Text);
}
}
}
private void SptReceiveOrSend_DataReceived(object sender, System.IO.Ports.SerialDataReceivedEventArgs e)
{
byte[] readBuffer = new byte[SptReceiveOrSend.BytesToRead];
SptReceiveOrSend.Read(readBuffer, 0, readBuffer.Length);
string indata = Encoding.Default.GetString(readBuffer);
MessageShow(ChkTest_ShowMessage.Checked, "串口1接收到" + readBuffer.Length + "字节Byte:\r\n" + indata);
//要是不能接收到完整的记录就存起来(最后一位是终止符",")
if (indata.Substring(indata.Length - 1, 1) != Port.identifier)
{
saveLast += indata;
return;
}
indata = saveLast + indata;
saveLast = "";
string[] SN = indata.Split(new string[] { Port.identifier }, StringSplitOptions.RemoveEmptyEntries);
foreach (string str in SN)
{
string sn = str.Replace("\r", string.Empty).Replace("\n", string.Empty);
if (sn != "ERROR" && !SN.Contains("+") && sn.Length != 17)
{
Log.WriteError(sn);
}
this.Invoke(new Action(() =>
{
Action(sn);
}));
}
}
private void SptReceiveOrSend_DataReceived(object sender, System.IO.Ports.SerialDataReceivedEventArgs e)
{
//MessageBox.Show("串口1已触发DataReceived");
//byte[] byteRead = new byte[SptReceiveOrSend.BytesToRead];
//SptReceiveOrSend.Read(byteRead, 0, byteRead.Length);
//string dataRe = Encoding.Default.GetString(byteRead);
byte[] readBuffer = new byte[SptReceiveOrSend.BytesToRead];
SptReceiveOrSend.Read(readBuffer, 0, readBuffer.Length);
string indata = Encoding.Default.GetString(readBuffer);
MessageShow(ChkTest_ShowMessage.Checked, "串口1接收到" + readBuffer.Length + "字节Byte:\r\n" + indata);
//SerialPort sp = (SerialPort)sender;
#region 改成readBuffer
//int count = sp.BytesToRead;
//byte[] readBuffer = new byte[count];
//sp.Read(readBuffer, 0, count);
//string indata = Encoding.Default.GetString(readBuffer);
#endregion
//string indata = sp.ReadExisting();
//MessageBox.Show("串口1接收到:\r\n" + indata);
//MessageBox.Show("从串口接收到:\r\n"+indata);
//要是不能接收到完整的记录就存起来(最后一位是终止符",")
//if (indata.Substring(indata.Length - 1, 1) != ",")
if (indata.Substring(indata.Length - 1, 1) != Port.identifier)
{
saveLast += indata;
return;
}
//MessageBox.Show("action");
indata = saveLast + indata;
saveLast = "";
//string[] SN = indata.Split(',');
string[] SN = indata.Split(new string[] { Port.identifier }, StringSplitOptions.RemoveEmptyEntries);
foreach (string str in SN)
{
if (str == "")
{
continue;
}
if (str != "ERROR" && !SN.Contains("+") && str.Length != 17)
{
Log.WriteError(str);
}
//action(str);
this.Invoke(new Action(() =>
{
//就是textbox输入
Action(str);
}));
}
}
void Action(string SN)
{
Application.DoEvents();
//填满之后，清空
object sender = new object { };
if (sequence == NTRSjudge.Layout.sum)
{
BtnClear_Click(sender, new EventArgs());
}
//if (mode == Mode.旧机器 && !SN.Contains("ERROR"))
// SN = SN.Substring(0, 17);
if (!SN.Contains("ERROR"))
{
SN = SN.Substring(0, 17);
}
Judge.judge(SN);
//Judge.judge("ERROR");
TxtSN.Text = string.Empty;
#region 生产模式(不同方式串口发送信息)
//接收(光子云拍照)：一整盘由","隔开的SN
//ERROR,GH945678901LKRQ01,......GH945678901LKRQ64,
//发送：一整盘ok发"ok,"，存在非"PASS"发送"ng,"
//"ok," "ng,"
//MessageBox.Show("away API,mode="+mode.ToString());
if (mode == Mode.光子云)//光子云
{
if (AllInfo.SNlist.Count == NTRSjudge.Layout.sum)
{
string sendStr = "ok,";
foreach (var var in AllInfo.SNlist)
{
if (var.result != "PASS")
{
sendStr = "ng,";
break;
}
}
SptReceiveOrSend.Write(sendStr);
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口1发出" + sendStr.Length + "字节Byte:\r\n" + sendStr);
}
}
//接收（扫描器）：一个接一个的SN
//ERROR GH945678901LKRQ01
//发送：一整盘ok发"0"，存在非"PASS"发送坐标
//"0" "X0 = 2,Y0 = 3,X1 = 4,Y1 = 5,"
//(第2行第3列，第4行第5列材料NG，需要捡出)
else if (mode == Mode.大研)//大研
{
if (AllInfo.SNlist.Count == NTRSjudge.Layout.sum)
{
//string sendStr =type + snInfo.firstTime.ToString("yyyyMMddHHmmss");
string sendStr = Pqm.type + Pqm.line.Remove(0, 1) + Pqm.process.Substring(0, 1) + AllInfo.SNlist[AllInfo.SNlist.Count - 1].firstTime.ToString("yyMMddHHmmss").Remove(0, 1);
for (int i = 1; i <= AllInfo.SNlist.Count; i++)
{
if (AllInfo.SNlist[i - 1].result != "PASS")
{
//如果"01.02.05."去掉"."的话，要是串口数据丢失一个，后面全部都会识别错误
//不去掉"."的话，只会识别丢失的位置
if (i < 10)
{
sendStr += "0" + i.ToString();
}
else
{
sendStr += i.ToString();
}
}
}
SptReceiveOrSend.Write(sendStr + "\r\n");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口1发出" + (sendStr.Length + 1).ToString() + "字节Byte:\r\n" + sendStr + "\r\n(回车)");
}
}
//每次接收分析后发一个信号给串口
//接收（扫描器）：一个接一个的SN+","
//GH945678901LKRQ01,
//发送：根据结果"MISS"、"PASS"、"FAIL"、"SKIP"分别发送他们的头一个字母
//"M" "P" "F" "S"
else if (mode == Mode.单片机)//单片机
{
switch (AllInfo.SNlist[AllInfo.SNlist.Count - 1].result)
{
case "MISS":
SptSend.Write("M");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nM");
break;
case "PASS":
SptSend.Write("P");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nP");
break;
case "FAIL":
SptSend.Write("F");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nF");
break;
case "HOLD":
SptSend.Write("F");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nF");
break;
case "SKIP":
SptSend.Write("S");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nS");
break;
default:
SptSend.Write("F");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出1字节Byte:\r\nF");
break;
}
}
//发送错误坐标或ok
//接收(光子云拍照)：一整盘由","隔开的SN
//ERROR,GH945678901LKRQ01,......GH945678901LKRQ64,
//发送：一整盘ok发"ok"，存在非"PASS"发送坐标加"."，最后结尾都加回车
//"ok\r\n" "1,1.1,2\r\n"
else if (mode == Mode.ONS)//供应商
{
if (AllInfo.SNlist.Count == NTRSjudge.Layout.sum)
{
string sendStr = "";
for (int i = 0; i < AllInfo.SNlist.Count; i++)
{
if (AllInfo.SNlist[i].result != "PASS")
{
//固定布局（竖排或横排）
//int x = i / APP_Config.row;
//int y = i % APP_Config.row;
//sendStr += (x + 1).ToString() + "," + (y + 1).ToString() + ".";
sendStr += Regedit.Trajectory[i] + ".";
}
}
if (sendStr == "")
{
sendStr = "ok";
}
//SptSend.WriteLine(sendStr);//
SptSend.Write(sendStr + "\r\n");
MessageShow(ChkTest_ShowMessage.Checked, "mode=" + mode + "，串口2发出" + (sendStr.Length + 1).ToString() + "字节Byte:\r\n" + sendStr + "\r\n(回车)");
}
}
#endregion
//方块布局显示
int[] location = Array.ConvertAll(Regedit.Trajectory[sequence].Split(','), int.Parse);
try
{
TlpLayout.Controls.Add(NTRSjudge.Layout.paint(AllInfo.SNlist[AllInfo.SNlist.Count - 1]),
location[0] - 1, location[1] - 1);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
//数据显示
SNlab.Text = AllInfo.SNlist[AllInfo.SNlist.Count - 1].SN;
TxtDetail.Text = AllInfo.SNlist[AllInfo.SNlist.Count - 1].detail;
LblJudge.Text = AllInfo.SNlist[AllInfo.SNlist.Count - 1].result;
//写log
Log.WriteLog(SNlab.Text, TxtDetail.Text, LblJudge.Text);
//非"MISS"（"PASS"、"FAIL"、"SKIP"），写sum和csv
if (LblJudge.Text != "MISS")
{
switch (LblJudge.Text)
{
case "PASS":
Sum.passQty++;
break;
case "FAIL":
Sum.failQty++;
break;
case "SKIP":
Sum.skipQty++;
break;
}
Sum.WriteTotal();
TxtTotal.Text = Sum.ReadTotal();
Pqm.WriteCSV(AllInfo.SNlist[AllInfo.SNlist.Count - 1]);
}
sequence++;
}
