private void SaveDoc(string name)
{
//Сохранение
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("10-4");
SolidWorksDocument.Visible = true;
SolidWorksDocument.SaveAs2(base.NewPartPath + @"\" + name + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, false, true);
}
private void OpenTemplate(PanelType_e panelType)
{
if (isDoublePanal)
{
AssemblyName = "02-104-50";
}
else
{
AssemblyName = "02-01";
}
NewPartPath = System.IO.Path.Combine(RootFolder, SourceFolder, AssemblyName + ".SLDASM");
SolidWorksAdapter.OpenDocument(NewPartPath, swDocumentTypes_e.swDocASSEMBLY);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(AssemblyName + ".SLDASM");
}
//Profile for FrontPanel
public void FrameProfil(double lenght, ProfilType_e type, bool flange30, string partName)
{
var width = framelessPanel.ThermoStrip == ThermoStrip_e.ThermoScotch ? 38.5 : 40.0;
string config = "00";
switch (type)
{
case ProfilType_e.HorisontalProfil:
config = "00";
break;
case ProfilType_e.VerticalProfil:
config = "01";
break;
}
NewPartPath = System.IO.Path.Combine(base.RootFolder, SubjectDestinationFolder, partName + ".SLDPRT");
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("02-11-11-40-.SLDPRT");
SolidWorksDocument.ShowConfiguration2(config);
string[] configs = SolidWorksDocument.GetConfigurationNames();
foreach (var s in configs)
{
if (!s.Equals(config))
{
SolidWorksDocument.DeleteConfiguration2(s);
}
}
// rename current configuration.
SolidWorksDocument.ConfigurationManager.ActiveConfiguration.Name = "00";
lenght = type == ProfilType_e.HorisontalProfil ? lenght - 60 : lenght;
double rivetStep = Math.Truncate(lenght / 100) * 1000;
parameters.Add("D2@Эскиз1", lenght);
parameters.Add("D1@Кривая1", rivetStep == 1000 ? 2000 : rivetStep);
parameters.Add("D2@Эскиз23", (!flange30) ? 10.0 : 15.0);
parameters.Add("D3@Эскиз23", (!flange30) ? 10.0 : 15.0);
EditPartParameters("02-11-11-40-", NewPartPath, 0);
}
protected virtual void EditPartParameters(string partName, string newPath, int materialID)
{
foreach (var eachParameter in parameters)
{
try
{
Dimension myDimension = (SolidWorksDocument.Parameter(eachParameter.Key + "@" + partName + ".SLDPRT")) as Dimension;
myDimension.SystemValue = eachParameter.Value / 1000;
}
catch (Exception ex)
{
//System.Windows.Forms.MessageBox.Show(eachParameter.Key + "@" + partName);
MessageObserver.Instance.SetMessage(ex.ToString(), MessageType.Error);
}
}
this.parameters.Clear();
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(partName);
if (SolidWorksDocument != null)
{
SolidWorksDocument.ForceRebuild3(true);
toSQL.AddCustomProperty("", materialID, SolidWorksAdapter.SldWoksAppExemplare);
SolidWorksDocument.Extension.SaveAs(newPath + ".SLDPRT", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent
+ (int)swSaveAsOptions_e.swSaveAsOptions_SaveReferenced + (int)swSaveAsOptions_e.swSaveAsOptions_UpdateInactiveViews, null, ref errors, warnings);
InitiatorSaveExeption(errors, warnings, newPath);
SolidWorksAdapter.CloseDocument(SolidWorksDocument);
}
else
{
System.Windows.Forms.MessageBox.Show("Не удалось преобразовать деталь " + partName);
}
SolidWorksAdapter.SldWoksAppExemplare.DocumentVisible(false, 2);
SolidWorksAdapter.SldWoksAppExemplare.DocumentVisible(false, 1);
}
protected virtual void EditPartParameters(string partName, string newPath)
{
//Console.WriteLine(newPath);
foreach (var eachParameter in parameters)
{
try
{
Console.WriteLine(eachParameter.Key + "@" + partName + " val: " + eachParameter.Value);
Dimension myDimension = (SolidWorksDocument.Parameter(eachParameter.Key + "@" + partName + ".SLDPRT")) as Dimension;
myDimension.SystemValue = eachParameter.Value / 1000;
}
catch (Exception ex)
{
Console.WriteLine(eachParameter.Key + " " + ex);
}
}
SolidWorksDocument.ForceRebuild3(true);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(partName);
SolidWorksDocument.Extension.SaveAs(newPath + ".SLDPRT", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent
+ (int )swSaveAsOptions_e.swSaveAsOptions_SaveReferenced + (int)swSaveAsOptions_e.swSaveAsOptions_UpdateInactiveViews, null, ref errors, warnings);
InitiatorSaveExeption(errors, warnings, newPath);
this.parameters.Clear();
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(partName);
}
public string Build(SpigotType_e type, int width, int height)
{
string modelName = GetModelName(type);
NewSpigotName = GetSpigotName(type, width, height);
Dimension dimension;
int addDimH = modelName == "12-30" ? 10 : 1;
string newSpigotPath = $@"{RootFolder}{SubjectDestinationFolder}\{NewSpigotName}";
string drawingName = modelName == "12-30" ? modelName : "12-00";
var modelSpigotDrw = $@"{RootFolder}{SourceFolder}\{drawingName}.SLDDRW";
ModelDoc2 swDrawingSpigot = SolidWorksAdapter.OpenDocument(modelSpigotDrw, swDocumentTypes_e.swDocDRAWING);
solidWorksDocument = SolidWorksAdapter.AcativeteDoc("12-00");
AssemblyDoc assemblyDocument = (AssemblyDoc)solidWorksDocument;
assemblyDocument.ResolveAllLightWeightComponents(false);
DeleteEquations(modelName);
solidWorksDocument.ForceRebuild3(true);
#region formuls
var w = (Convert.ToDouble(width) - 1) / 1000; // ????????????
var h = Convert.ToDouble((Convert.ToDouble(height) + addDimH) / 1000); // ????????????
const double step = 50;
var weldWidth = Convert.ToDouble((Math.Truncate(Convert.ToDouble(width) / step) + 1)); // ????????????
var weldHeight = Convert.ToDouble((Math.Truncate(Convert.ToDouble(height) / step) + 1)); // ????????????
#endregion
DeleteComponents((int)type);
if (modelName == "12-20")
{
PartName = $"12-20-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(NewPartPath, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
//12-20-002
PartName = $"12-20-{width}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
MessageObserver.Instance.SetMessage("\tCheckExistPartEvent");
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-20-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-20-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldWidth;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewPartPath);
}
}
if (modelName == "12-30")
{
//12-30-001
PartName = $"12-30-{height}.SLDPRT";
MessageObserver.Instance.SetMessage("Check exist part. " + NewPartPath);
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = h - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-001-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-30-002
PartName = $"12-30-{width}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-30-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D1@Вытянуть1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Вытянуть[email protected]")));
dimension.SystemValue = w - 0.031;
solidWorksDocument.Extension.SelectByID2("D1@Кривая1@12-30-002-1@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D1@Кривая[email protected]")));
dimension.SystemValue = weldHeight;
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
//12-003
PartName = $"12-03-{width}-{height}.SLDPRT";
if (CheckExistPart != null)
{
CheckExistPart(PartName, out IsPartExist, out NewPartPath);
}
else
{
MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
}
if (IsPartExist)
{
solidWorksDocument.Extension.SelectByID2("12-003-2@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
assemblyDocument.ReplaceComponents(PartName, "", true, true);
}
else
{
NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{NewPartPath}";
solidWorksDocument.Extension.SelectByID2("D3@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D3@Эскиз[email protected]")));
dimension.SystemValue = w;
solidWorksDocument.Extension.SelectByID2("D2@Эскиз1@12-003-2@12-00", "DIMENSION", 0, 0, 0, false, 0, null, 0);
dimension = ((Dimension)(solidWorksDocument.Parameter("D2@Эскиз[email protected]")));
dimension.SystemValue = h;
solidWorksDocument.EditRebuild3();
SolidWorksDocument.Extension.SaveAs(NewPartPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath);
ComponentsPathList.Add(NewPartPath);
}
}
solidWorksDocument.ForceRebuild3(true);
solidWorksDocument.Extension.SaveAs(newSpigotPath + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDASM");
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(NewSpigotName + ".SLDASM");
ComponentsPathList.Add(newSpigotPath + ".SLDASM");
swDrawingSpigot.Extension.SelectByID2("DRW1", "SHEET", 0, 0, 0, false, 0, null, 0);
var drw = (DrawingDoc)SolidWorksAdapter.AcativeteDoc(drawingName + ".SLDDRW");
drw.ActivateSheet("DRW1");
drw.SetupSheet5("DRW1", 12, 12, 1, GetDrawingScale(width, height), true, @"\\pdmsrv\SolidWorks Admin\Templates\Основные надписи\A3-A-1.slddrt", 0.42, 0.297, "По умолчанию", false);
swDrawingSpigot.Extension.SaveAs(newSpigotPath + ".SLDDRW", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, newSpigotPath + ".SLDDRW");
ComponentsPathList.Add(newSpigotPath + ".SLDDRW");
SolidWorksAdapter.CloseAllDocumentsAndExit();
return(newSpigotPath);
}
public void Build(Vector3 frameSize, int profileType, ServiceSide serviceSide)
{
string caseAssemblyPath = Path.Combine(RootFolder, SourceFolder, modelName);
Patterns.Observer.MessageObserver.Instance.SetMessage("\n" + caseAssemblyPath + "\n");
ModelDoc2 SolidWorksDocument = SolidWorksAdapter.OpenDocument(caseAssemblyPath, swDocumentTypes_e.swDocASSEMBLY);// SolidWorksDocumentumentTypes_e.SolidWorksDocumentASSEMBLY);
Patterns.Observer.MessageObserver.Instance.SetMessage("открылась сборка");
//AssemblyDocument = SolidWorksAdapter.ToAssemblyDocument( SolidWorksDocument);
double rivetL;
string newName = "01-P150-45-" + (frameSize.Z - 140);
string newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P150-45-1640-27@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P150-45-1640.SLDPRT");
}
else if (File.Exists(newPartPath) != true) // TO DO delegate
{
rivetL = (Math.Truncate((frameSize.Z - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", frameSize.Z - 140);
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
//frameSize.X
newName = "01-P150-45-" + (frameSize.X - 140);
newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-003-50-22@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-003-50.SLDPRT");
}
else
{
rivetL = (Math.Truncate((frameSize.X - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", frameSize.X - 140);
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
//01-P252-45-770
newName = "01-P252-45-" + (frameSize.X - 100);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P252-45-770-6@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P252-45-770.SLDPRT");
}
else
{
parameters.Add("D1@Вытянуть1", frameSize.X - 100);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
//frameSize.Y
newName = "01-P150-45-" + (frameSize.Y - 140);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P150-45-510-23@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P150-45-510.SLDPRT");
}
else
{
rivetL = (Math.Truncate((frameSize.Y - 170) / step) + 1) * 1000;
parameters.Add("D1@Вытянуть1", (frameSize.Y - 140));
parameters.Add("D1@Кривая1", rivetL);
EditPartParameters("01-P150-45-1640", newPartPath, 0);
}
// 01-P252-45-550
newName = "01-P252-45-" + (frameSize.Y - 100);
newPartPath = newPartPath = GetFrameCasePath(newName);
if (File.Exists(new FileInfo(newPartPath).FullName))
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.Extension.SelectByID2("01-P252-45-550-10@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("01-P252-45-550.SLDPRT");
}
else
{
parameters.Add("D1@Вытянуть1", frameSize.Y - 100);
EditPartParameters("01-P252-45-550", newPartPath, 0);
}
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(modelName);
SolidWorksDocument.EditRebuild3();
SolidWorksDocument.ForceRebuild3(true);
// AssemblyDocument = (AssemblyDoc)SolidWorksDocument;
if (serviceSide == ServiceSide.Left)
{
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-1@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-6@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-7@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-10@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-4@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-12@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-12@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
}
else if (serviceSide == ServiceSide.Right)
{
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-16@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-21@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-22@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-17@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("Threaded Rivets с насечкой-23@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-18@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("M8-Panel block-one side-18@" + modelName.Replace(".SLDASM", ""), "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
}
}
}
public string Build(int type, Vector2 spigotSize, int materialID) // должен возвращать лист с путями к файлам
{
Dictionary <string, string> dictionary = new Dictionary <string, string>();
long tempId = 0;
List <long> idObjWithNewPath = new List <long>();
DataSet ds = null;
//DataTable dt = ipsModuleObject.GetIMBASETable((long)IMBASE_TablesID.Spigot, out ds, out dictionary);
base.PartPrototypeName = GetPrototypeName((SpigotType_e)type);
string drawingNameWithExt = "12-00.SLDDRW";
int addDimH = base.PartPrototypeName == "12-30" ? 10 : 1;
string drawingSpigotPath = Path.Combine(RootFolder, SourceFolder, drawingNameWithExt);
SolidWorksAdapter.OpenDocument(drawingSpigotPath, swDocumentTypes_e.swDocDRAWING);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(base.AssemblyName + ".SLDASM");
SolidWorksAdapter.ToAssemblyDocument(SolidWorksDocument);
DeleteEquations(base.PartPrototypeName);
DeleteComponents(type);
SolidWorksDocument.ForceRebuild3(true);
#region formuls
double w = spigotSize.X;
double h = spigotSize.Y - addDimH;
const double step = 50;
double weldWidth = Math.Truncate(spigotSize.X / step) * 1000 + 1;
double weldHeight = Math.Truncate(spigotSize.Y / step) * 1000 + 1;
#endregion
if (base.PartPrototypeName == "12-20")
{
#region 12-20
base.PartName = $"12-20-{spigotSize.Y}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))// добавить out filePath
//{
// // открывать детальку
// SolidWorksDocument.Extension.SelectByID2("12-20-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", h - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
EditPartParameters("12-20-001", base.NewPartPath, materialID);
//tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
idObjWithNewPath.Add(tempId);
//}
//12-20-002
base.PartName = $"12-20-{spigotSize.X}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))
//{
// //открывать детальку
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", w - 31);
base.parameters.Add("D1@Кривая1", weldWidth);
EditPartParameters("12-20-002", base.NewPartPath, materialID);
// tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
//Part=1296
//Изделие=1052
idObjWithNewPath.Add(tempId);
//}
//12-003
base.PartName = $"12-03-{spigotSize.X}-{spigotSize.Y}";
//if (ipsModuleObject.CheckForSimilarRows(base.PartName, dt, dictionary))
//{
// //открывать детальку
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D3@Эскиз1", w);
base.parameters.Add("D2@Эскиз1", h);
EditPartParameters("12-003", base.NewPartPath, materialID);
// tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.NewPartPath + ".SLDPRT", "Обозначениеttt", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
//ComponentsPathList.Add(base.NewPartPath);
idObjWithNewPath.Add(tempId);
//}
#endregion
}
else if (base.PartPrototypeName == "12-30")
{
#region 12-30
//12-30-001
base.PartName = $"12-30-{spigotSize.Y}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-30-001-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", h - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
//base.parameters.Add("D5@Эскиз1", weldHeight);
EditPartParameters("12-30-001", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
//12-30-002
base.PartName = $"12-30-{spigotSize.X}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-30-002-1@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D1@Вытянуть1", w - 31);
base.parameters.Add("D1@Кривая1", weldHeight);
EditPartParameters("12-30-002", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
//12-003
base.PartName = $"12-03-{spigotSize.X}-{spigotSize.Y}";
//if (CheckExistPart != null)
//{
// CheckExistPart(base.PartName, RootFolder, out base.NewPartPath);
//}
//else
//{
// MessageObserver.Instance.SetMessage("CheckExistPartEvent can not be null", MessageType.Warning);
//}
//if (NewPartPath != string.Empty && NewPartPath != null)
//{
// SolidWorksDocument.Extension.SelectByID2("12-003-2@12-00", "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
//}
//else
//{
base.NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, base.PartName);
base.parameters.Add("D3@Эскиз1", w);
base.parameters.Add("D2@Эскиз1", h);
EditPartParameters("12-003", base.NewPartPath, materialID);
ComponentsPathList.Add(base.NewPartPath);
//}
#endregion
}
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(base.AssemblyName + ".SLDASM");
SolidWorksDocument.ForceRebuild3(true);
NewPartPath = Path.Combine(RootFolder, SubjectDestinationFolder, GetSpigotName((SpigotType_e)type, spigotSize));
SolidWorksDocument.Extension.SaveAs(NewPartPath + ".SLDASM", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath + ".SLDASM");
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc(base.NewPartPath + ".SLDASM");
//tempId = op.WriteIntoIMBASE_Spigot_Table(dt, base.AssemblyName + ".SLDASM", "ОбозначениеСборка", base.PartName, spigotSize.X.ToString(), spigotSize.Y.ToString(), type.ToString(), 1);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(drawingNameWithExt);
SolidWorksDRW = SolidWorksAdapter.ToDrawingDoc(SolidWorksDocument);
base.SolidWorksDRW.ActivateSheet("DRW1");
SolidWorksDRW.SetupSheet5("DRW1", 12, 12, 1, GetDrawingScale(spigotSize), true, @"\\pdmsrv\SolidWorks Admin\Templates\Основные надписи\A3-A-1.slddrt", 0.42, 0.297, "По умолчанию", false);
SolidWorksDocument.Extension.SaveAs(NewPartPath + ".SLDDRW", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref error, ref warning);
InitiatorSaveExeption(error, warning, NewPartPath + ".SLDDRW");
// create relations between docs
//ipsModuleObject.MakeRelationsBtwnDocs(idObjWithNewPath, tempId);
SolidWorksAdapter.CloseAllDocumentsAndExit();
return(NewPartPath);
}
public string Build(int type, double width, double lenght, bool onlyPath, int materialID)
{
SolidWorksDocument = null;
base.PartName = "15-000";
base.NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{base.PartName}";
string modelRoofPath = $@"{RootFolder}\{SourceFolder}\{base.PartName}.SLDASM";
SolidWorksAdapter.OpenDocument(modelRoofPath, swDocumentTypes_e.swDocASSEMBLY, "00");
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(base.PartName + ".SLDASM");
DeleteComponents(type);
#region Сохранение и изменение элементов
var addwidth = 100;
var addwidth2 = 75;
var type4 = 0;
var divwidth = 1;
if ((RoofType_e)type == RoofType_e.Two || (RoofType_e)type == RoofType_e.Six)
{
addwidth = 75;
divwidth = 2;
}
else if ((RoofType_e)type == RoofType_e.Four)
{
type4 = 170;
addwidth2 = 170 + 75;
}
double widthD = width / divwidth + addwidth;
double lengthD = lenght - 28.5;
const double step = 200;
const double step2 = 150;
double weldW = Math.Truncate(lenght / step) + 1;
double weldW2 = Math.Truncate(lenght / step2) + 1;
//15-001
#region
string newPartName = $"15-0{type}-01-{width}-{lenght}";
AssemblyName = $"15-0{type}-01-{width}-{lenght}.SLDASM";
//CheckExistPart(NewPartPath, RootFolder, out NewPartPath);
if (base.IsPartExist)
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("15-000.SLDASM");
SolidWorksDocument.Extension.SelectByID2("15-001-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
base.AssemblyDocument.ReplaceComponents(AssemblyName, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("15-001.SLDPRT");
}
else
{
base.NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{newPartName}";
base.parameters.Add("D1@Эскиз1", (RoofType_e)type == RoofType_e.Five || (RoofType_e)type == RoofType_e.Six ? (140 + lengthD + type4) : (lengthD + type4));
base.parameters.Add("D2@Эскиз1", widthD);
base.parameters.Add("D4@Эскиз27", addwidth2 - 4.62);
base.parameters.Add("D1@Эскиз27", 90);
base.parameters.Add("D2@Эскиз27", 75 - 4.62);
base.parameters.Add("D1@Эскиз24", ((RoofType_e)type == RoofType_e.Five || (RoofType_e)type == RoofType_e.Six) ? 149.53 : 9.53);
base.parameters.Add("D1@Кривая2", weldW2 * 1000);
base.parameters.Add("D1@Кривая1", weldW * 1000);
EditPartParameters("15-001", NewPartPath, materialID);
}
#endregion
//15-002 if type = 6
#region
if ((RoofType_e)type == RoofType_e.Six)
{
newPartName = $"15-06-02-{width}-{lenght}";
//CheckExistPart(NewPartPath, RootFolder, out NewPartPath);
if (base.IsPartExist)
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("15-000.SLDASM");
SolidWorksDocument.Extension.SelectByID2("15-002-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
base.AssemblyDocument.ReplaceComponents(AssemblyName, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("15-002.SLDPRT");
}
else
{
base.NewPartPath = $@"{RootFolder}\{SubjectDestinationFolder}\{newPartName}";
base.parameters.Add("D1@Эскиз1", 140 + lengthD + type4);
base.parameters.Add("D2@Эскиз1", widthD);
base.parameters.Add("D4@Эскиз27", addwidth2 - 4.62);
base.parameters.Add("D1@Эскиз27", 90);
base.parameters.Add("D2@Эскиз27", 75 - 4.62);
base.parameters.Add("D2@Эскиз23", 165);
base.parameters.Add("D1@Кривая2", weldW2 * 1000);
base.parameters.Add("D1@Кривая1", weldW * 1000);
EditPartParameters("15-002", NewPartPath, materialID);
}
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("15-000.SLDASM");
SolidWorksDocument.Extension.SelectByID2("15-001-3@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.Extension.SelectByID2("ЗеркальныйКомпонент2@15-000", "COMPPATTERN", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditSuppress2();
}
else // если тип не == 6, удаляем деталь 15-002
{
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("15-000.SLDASM");
SolidWorksDocument.Extension.SelectByID2("15-002-1@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
}
#endregion
switch ((RoofType_e)type)
{
case RoofType_e.Two:
case RoofType_e.Six:
SolidWorksDocument.Extension.SelectByID2("Винт самосверл 6-гр.гол с шайбой-33@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Винт самосверл 6-гр.гол с шайбой-40@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
break;
default:
SolidWorksDocument.Extension.SelectByID2("Винт самосверл 6-гр.гол с шайбой-26@15-000", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
break;
}
#endregion
try
{
SolidWorksDocument.ForceRebuild3(true);
SolidWorksDocument.SaveAs2(AssemblyName, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, false, true);
ComponentsPathList.Add(base.NewPartPath);
//SolidWorksAdapter.CloseAllDocumentsAndExit();
}
catch (Exception ex)
{
Patterns.Observer.MessageObserver.Instance.SetMessage(ex.ToString());
}
if (onlyPath)
{
return(base.NewPartPath);
}
return(base.NewPartPath);
}
public void BuildMountageFrame(bool cheched, int width, int lenght, int thikness, int FrameType, int offset, int materialID)
{
string assemblyName = "10-4";
string modelMontageFramePath = $@"{base.RootFolder}\{base.SourceFolder}\{assemblyName}.SLDASM";
SolidWorksDocument = SolidWorksAdapter.OpenDocument(modelMontageFramePath, swDocumentTypes_e.swDocASSEMBLY, "");
tbAssemblyNameDataContext bildFrame = new tbAssemblyNameDataContext();
SolidWorksAdapter.ToAssemblyDocument(SolidWorksDocument);
int?ID = 0;
ID = bildFrame.AirVents_AddAssemblyFrame(FrameType, width, lenght, thikness, offset, 0, ref ID);
string assmblName = ID?.ToString();
if (cheched)
{
width = width - 20;
}
tempOffset = offset;
if (offset > (lenght - 125) * 10)
{
offset = (lenght - 250) * 10;
MessageBox.Show("Смещение превышает допустимое значение! Программой установлено - " + (offset / 10));
}
else
{
SetBends = GetSetBends; //получаем значения KFactor, BendRadius из SWPlusBD Materials.BendTable
GetFrameType((MontageFrameType_e)FrameType, lenght, out offset); //определяем по типу рамы, какие балки удалять
SetBends?.Invoke((decimal)thikness, out KFactor, out BendRadius);
if (lenght > 1000)
{
SolidWorksDocument.Extension.SelectByID2("Middle@10-01-01-4-1@10-4", "FTRFOLDER", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditUnsuppress2();
SolidWorksDocument.Extension.SelectByID2("Middle", "FTRFOLDER", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditUnsuppress2();
}
#region Удаление поперечной балки
//Тип рамы 2
if (internalCrossbeam == false)
{
SolidWorksDocument.Extension.SelectByID2("10-03-01-4-1@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-39@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-40@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Washer 6402_gost-23@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Гайка DIN 934-19@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Болт DIN 933-22@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-41@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-42@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Washer 6402_gost-24@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Гайка DIN 934-20@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Болт DIN 933-23@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-43@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-44@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Washer 6402_gost-25@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Гайка DIN 934-21@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Болт DIN 933-24@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-45@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-46@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Washer 6402_gost-26@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Гайка DIN 934-22@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Болт DIN 933-25@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
// Удаление ненужных элементов продольной балки
SolidWorksDocument.Extension.SelectByID2("Вырез-Вытянуть8@10-01-01-4-1@10-4", "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditSuppress2();
}
#endregion
#region Удаление продольной балки
// Погашение внутренней продольной балки
if (internalLongitudinalBeam == false)
{
foreach (var s in new[] { "5", "6", "7", "8" })
{
SolidWorksDocument.Extension.SelectByID2("Болт DIN 933-" + s + "@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
}
foreach (var s in new[] { "6", "7", "8", "9", "37", "38", "39", "40" })
{
SolidWorksDocument.Extension.SelectByID2("Washer 6402_gost-" + s + "@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
}
foreach (var s in new[] { "17", "18", "19", "20", "21", "22", "23", "24", "57", "58", "59", "60" })
{
SolidWorksDocument.Extension.SelectByID2("Шайба DIN 125-" + s + "@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
}
SolidWorksDocument.Extension.SelectByID2("10-04-4-2@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
//// Удаление ненужных элементов поперечной балки
SolidWorksDocument.Extension.SelectByID2("Регулируемая ножка-10@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Регулируемая ножка-11@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
SolidWorksDocument.Extension.SelectByID2("Регулируемая ножка-002@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditDelete();
foreach (var s in new[] { "10", "11", "12", "13", "40", "41", "42", "43" })
{
SolidWorksDocument.Extension.SelectByID2("Гайка DIN 934-" + s + "@10-4", "COMPONENT", 0, 0, 0, true, 0, null, 0);
SolidWorksDocument.EditDelete();
}
int deleteOption = (int)swDeleteSelectionOptions_e.swDelete_Absorbed + (int)swDeleteSelectionOptions_e.swDelete_Children;
SolidWorksDocument.Extension.SelectByID2("Вырез-Вытянуть5@10-03-01-4@10-4", "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.Extension.DeleteSelection2(deleteOption);
SolidWorksDocument.Extension.SelectByID2("Вырез-Вытянуть4@10-03-01-4@10-4", "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.Extension.DeleteSelection2(deleteOption);
}
else
{
//Продольные балки (Длина установки)
ID = 0;
ID = bildFrame.AirVents_AddAssemblyFrame(FrameType, width, 0, thikness, 0, 4, ref ID);
SolidWorksDocument.Extension.SelectByID2("10-04-4-2@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditUnsuppress2();
base.parameters.Add("D1@Эскиз1", lenght - 140);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
base.parameters.Add("Толщина@Листовой металл", thikness);
EditPartParameters("10-04-4", base.NewPartPath + @"\10-" + ID, materialID);
}
#endregion
}
#region Изменение параметров
if (internalCrossbeam == true)
{
ID = 0;
ID = bildFrame.AirVents_AddAssemblyFrame(FrameType, width, 0, thikness, offset, 2, ref ID);
bildFrame.SubmitChanges();
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("10-01-01-4");
SolidWorksDocument.Extension.SaveAs(base.NewPartPath + @"\10-" + ID + ".SLDPRT", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent
+ (int)swSaveAsOptions_e.swSaveAsOptions_Copy, null, ref errors, warnings);
SolidWorksAdapter.CloseDocument(SolidWorksDocument);
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("10-4");
SolidWorksDocument.Extension.SelectByID2("10-01-01-4-2@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath + @"\10-" + ID + ".SLDPRT", "", false, true);
base.parameters.Add("D1@Эскиз1", lenght);
base.parameters.Add("D3@Эскиз25", lenght - offset);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
base.parameters.Add("Толщина@Листовой металл", thikness);
EditPartParameters(@"10-" + ID, base.NewPartPath + @"\10 -" + ID, materialID);
}
//Продольные балки (Длина установки)
ID = 0;
ID = bildFrame.AirVents_AddAssemblyFrame(FrameType, lenght, 0, thikness, offset, 1, ref ID);
bildFrame.SubmitChanges();
base.parameters.Add("D1@Эскиз1", lenght);
base.parameters.Add("D3@Эскиз25", offset);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
base.parameters.Add("Толщина@Листовой металл", thikness);
EditPartParameters("10-01-01-4", base.NewPartPath + @"\10-" + ID, materialID);
// Поперечная балка (Ширина установки)
ID = 0;
ID = bildFrame.AirVents_AddAssemblyFrame(FrameType, Convert.ToInt32(width - 0.12), 0, thikness, 0, 3, ref ID);
bildFrame.SubmitChanges();
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc("10-4");
SolidWorksDocument.Extension.SelectByID2("10-03-01-4-1@10-4", "COMPONENT", 0, 0, 0, false, 0, null, 0);
SolidWorksDocument.EditUnsuppress2();
base.parameters.Add("D2@Эскиз1", width - 0.12);
base.parameters.Add("D1@Листовой металл", (double)BendRadius);
base.parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
base.parameters.Add("Толщина@Листовой металл", thikness);
EditPartParameters("10-03-01-4", base.NewPartPath + @"\10-" + ID, materialID);
#endregion
SaveDoc(assmblName);
}
//Profiles for reinforcing panel
#region Усиливающие рамки
public void ReinforcingProfile(string testName)
{
const double thiknessF = 1;
//var bendParams = sbSqlBaseData.BendTable(thiknessF);
//var bendRadius = Convert.ToDouble(bendParams[0]);
//var kFactor = Convert.ToDouble(bendParams[1]);
const double heightF = 38.0; // Артурчик сказал не надо. 06.03.2017 16:45
#region Усиливающая рамка по ширине
//newName = усиливающаяРамкаПоШирине.NewName;
//newName = modelName + "-06-" + width + "-" + "40-" + materialP2[0] + скотч;
//newPartPath = $@"{Settings.Default.DestinationFolder}\{_destinationFolder}\{newName}.SLDPRT";
SolidWorksDocument = SolidWorksAdapter.AcativeteDoc(testName);// "02-11-07-40-"); // horisontal up
if (false)
{
}
else
{
parameters.Add("D2@Эскиз1", framelessPanel.PanelType == PanelType_e.RemovablePanel ? framelessPanel.SizePanel.X - 49.2 : framelessPanel.SizePanel.X - 47.2);
//parameters.Add("D1@Эскиз1", heightF);
parameters.Add("D1@Кривая3", ScrewsByWidthInner);
parameters.Add("D1@Кривая2", колСаморезВинтШирина);
//Размеры для отверсти под клепальные гайки под съемные панели
parameters.Add("G0@Эскиз32", OutputHolesWrapper.G0 - 3.6);
parameters.Add("G1@Эскиз32", OutputHolesWrapper.G1);
parameters.Add("G2@Эскиз32", OutputHolesWrapper.G2);
parameters.Add("G3@Эскиз32", OutputHolesWrapper.G0);
//Convert.ToString(количествоВинтов)
parameters.Add("L1@Эскиз32", OutputHolesWrapper.L1);
parameters.Add("D1@Кривая4", OutputHolesWrapper.D1);
parameters.Add("L2@Эскиз32", OutputHolesWrapper.L2);
parameters.Add("D1@Кривая5", OutputHolesWrapper.D2);
parameters.Add("L3@Эскиз32", OutputHolesWrapper.L3);
parameters.Add("D1@Кривая6", OutputHolesWrapper.D3);
parameters.Add("Толщина@Листовой металл", thiknessF);
parameters.Add("D1@Листовой металл", (double)BendRadius);
parameters.Add("D2@Листовой металл", (double)KFactor * 1000);
EditPartParameters("02-11-06-40-", "", 0);
// $@"{Settings.Default.DestinationFolder}\{_destinationFolder}\{newName}",
}
#endregion
#region Усиливающая рамка по ширине 2
if (framelessPanel.PanelType == PanelType_e.BlankPanel)
{
SolidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2(AssemblyName + ".SLDASM", true, 0)));
DocumentExtension.SelectByID2("02-11-06_2-40--4@" + AssemblyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(System.IO.Path.Combine(RootFolder, SubjectDestinationFolder, усиливающаяРамкаПоШирине.NewName + "SLDPRT"), String.Empty, true, true);
//($@"{RootFolder}\{SubjectDestinationFolder}\{усиливающаяРамкаПоШирине.NewName}.SLDPRT", "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("02-11-06_2-40-.SLDPRT");
}
else
{
//newName = усиливающаяРамкаПоШирине2.NewName;
//newName = modelName + "-06-" + width + "-" + "40-" + materialP2[0] + скотч;
//newPartPath = $@"{Settings.Default.DestinationFolder}\{_destinationFolder}\{newName}.SLDPRT";
if (false)
{
SolidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2(AssemblyName + ".SLDASM", true, 0)));
DocumentExtension.SelectByID2("02-11-06_2-40--4@" + AssemblyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
AssemblyDocument.ReplaceComponents(base.NewPartPath, "", true, true);
SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("02-11-06_2-40-.SLDPRT");
}
else
{
parameters.Add("D2@Эскиз1", framelessPanel.PanelType == PanelType_e.RemovablePanel ? framelessPanel.SizePanel.X - 49.2 : framelessPanel.SizePanel.X - 47.2);
parameters.Add("D1@Эскиз1", heightF);
parameters.Add("D1@Кривая3", ScrewsByWidthInner);
parameters.Add("D1@Кривая2", колСаморезВинтШирина);
parameters.Add("G0@Эскиз32", OutputHolesWrapper.G0 - 3.6);
parameters.Add("G1@Эскиз32", OutputHolesWrapper.G1);
parameters.Add("G2@Эскиз32", OutputHolesWrapper.G2);
parameters.Add("G3@Эскиз32", OutputHolesWrapper.G0);
parameters.Add("L1@Эскиз32", OutputHolesWrapper.L1);
parameters.Add("D1@Кривая4", OutputHolesWrapper.D1);
parameters.Add("L2@Эскиз32", OutputHolesWrapper.L2);
parameters.Add("D1@Кривая5", OutputHolesWrapper.D2);
parameters.Add("L3@Эскиз32", OutputHolesWrapper.L3);
parameters.Add("D1@Кривая6", OutputHolesWrapper.D3);
parameters.Add("Толщина@Листовой металл", thiknessF);
parameters.Add("D1@Листовой металл", (double)base.BendRadius);
parameters.Add("D2@Листовой металл", (double)base.KFactor * 1000);
EditPartParameters("02-11-06_2-40-", NewPartPath, 0);
}
}
#endregion
#region Усиливающая рамка по высоте
// PartName = усиливающаяРамкаПоВысоте.NewName;
NewPartPath = ""; // newName = modelName + "-07-" + lenght + "-" + "40-" + materialP2[0] + скотч;
NewPartPath = System.IO.Path.Combine(RootFolder, SubjectDestinationFolder, NewPartPath + "SLDPRT"); //$@"{Settings.Default.DestinationFolder}\{_destinationFolder}\{newName}.SLDPRT";
//if (GetExistingFile(Path.GetFileNameWithoutExtension(NewPartPath), 1)) {
// SolidWorksDocument = ((ModelDoc2)(SolidWorksAdapter.SldWoksAppExemplare.ActivateDoc2(AssemblyName + ".SLDASM", true, 0)));
// DocumentExtension.SelectByID2("02-11-07-40--1@" + AssemblyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
// AssemblyDocument.ReplaceComponents(newPartPath, "", true, true);
// SolidWorksAdapter.SldWoksAppExemplare.CloseDoc("02-11-07-40-.SLDPRT");
if (false)
{
;
}
else
{
parameters.Add("D3@Эскиз1", framelessPanel.PanelType == PanelType_e.RemovablePanel ? framelessPanel.SizePanel.Y - 2 : framelessPanel.SizePanel.Y);
parameters.Add("D1@Эскиз1", heightF);
parameters.Add("D1@Эскиз23", framelessPanel.PanelType == PanelType_e.BlankPanel ? 44.4 : 125);
parameters.Add("D1@Кривая2", ScrewsByHeightInner);
parameters.Add("D1@Кривая1", колЗаклепокВысота);
parameters.Add("Толщина@Листовой металл", thiknessF);
parameters.Add("D1@Листовой металл", (double)base.BendRadius);
parameters.Add("D2@Листовой металл", (double)base.KFactor * 1000);
EditPartParameters("02-11-07-40-", NewPartPath, 0);
#endregion
}
#endregion
}