Beispiel #1
0
        public string Calculate(
            int a_need,
            int b_need,
            int c_need,
            int d_need,
            int e_need,
            int f_need,
            int g_need,
            int h_need)
        {
            solver.SetBounds(a, a_need, Rational.PositiveInfinity);
            solver.SetBounds(b, b_need, Rational.PositiveInfinity);
            solver.SetBounds(c, c_need, Rational.PositiveInfinity);
            solver.SetBounds(d, d_need, Rational.PositiveInfinity);
            solver.SetBounds(e, e_need, Rational.PositiveInfinity);
            solver.SetBounds(f, f_need, Rational.PositiveInfinity);
            solver.SetBounds(g, g_need, Rational.PositiveInfinity);
            solver.SetBounds(h, h_need, Rational.PositiveInfinity);

            solver.Solve(new SimplexSolverParams());

            StringBuilder output = new StringBuilder();

            int total_a = 0, total_b = 0, total_c = 0, total_d = 0, total_e = 0, total_f = 0, total_g = 0, total_h = 0;

            foreach (var kv in oreDictionary.ORE_Dictionary)
            {
                if (useFullORE || kv.Value.isMain)
                {
                    int number = (int)Math.Ceiling(solver.GetValue(kv.Value.id).ToDouble());

                    if (number != 0)
                    {
                        output.Append($"矿物名称:{kv.Key},购买总量:{AmountFormat(number)},总金额:{MoneyFormat(number * kv.Value.price)}\n");
                        total_a += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["三钛合金"]) * number;
                        total_b += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["类晶体胶矿"]) * number;
                        total_c += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["类银超金属"]) * number;
                        total_d += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["同位聚合体"]) * number;
                        total_e += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["超星诺克石"]) * number;
                        total_f += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["晶状石英岩"]) * number;
                        total_g += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["超噬矿"]) * number;
                        total_h += (int)Math.Round(kv.Value.ratio * kv.Value.mineral["莫尔石"]) * number;
                    }
                }
            }

            output.Append($"三钛合金,需求:{a_need},化矿:{total_a},结余 :{total_a - a_need}\n");
            output.Append($"类晶体胶矿,需求:{b_need},化矿:{total_b},结余 :{total_b - b_need}\n");
            output.Append($"类银超金属,需求:{c_need},化矿:{total_c},结余 :{total_c - c_need}\n");
            output.Append($"同位聚合体,需求:{d_need},化矿:{total_d},结余 :{total_d - d_need}\n");
            output.Append($"超星诺克石,需求:{e_need},化矿:{total_e},结余 :{total_e - e_need}\n");
            output.Append($"晶状石英岩,需求:{f_need},化矿:{total_f},结余 :{total_f - f_need}\n");
            output.Append($"超噬矿,需求:{g_need},化矿:{total_g},结余 :{total_g - g_need}\n");
            output.Append($"莫尔石,需求:{h_need},化矿:{total_h},结余 :{total_h - h_need}\n");

            output.Append($"总金额:{MoneyFormat((int)solver.GetValue(cost).ToDouble())}\n");

            return(output.ToString());
        }
Beispiel #2
0
        public void Get()
        {
            SimplexSolver solver = new SimplexSolver();

            double[] estimatedProfitOfProjectX  = new double[] { 1, 1.8, 1.6, 0.8, 1.4 };
            double[] capitalRequiredForProjectX = new double[] { 6, 12, 10, 4, 8 };
            double   availableCapital           = 20;

            int[] chooseProjectX = new int[5];

            int profit;

            solver.AddRow("profit", out profit);
            solver.AddGoal(profit, 0, false);

            int expenditure;

            solver.AddRow("expenditure", out expenditure);
            solver.SetBounds(expenditure, 0, availableCapital);

            for (int i = 0; i < 5; i++)
            {
                solver.AddVariable(string.Format("project{0}", i), out chooseProjectX[i]);
                solver.SetBounds(chooseProjectX[i], 0, 1);
                solver.SetIntegrality(chooseProjectX[i], true);
                solver.SetCoefficient(profit, chooseProjectX[i], estimatedProfitOfProjectX[i]);
                solver.SetCoefficient(expenditure, chooseProjectX[i], capitalRequiredForProjectX[i]);
            }

            SimplexSolverParams param = new SimplexSolverParams();

            param.MixedIntegerGenerateCuts = true;
            solver.Solve(param);

            Console.WriteLine(solver.MipResult);
            for (int i = 0; i < 5; i++)
            {
                Console.WriteLine("Project {0} is {1} selected.", i, solver.GetValue(chooseProjectX[i]) == 1 ? "" : "not ");
            }
            Console.WriteLine("The estimated total profit is: ${0} million.", (double)solver.GetValue(profit).ToDouble());
            Console.WriteLine("The total expenditure is: ${0} million.", solver.GetValue(expenditure).ToDouble());
        }
Beispiel #3
0
        /// <summary>
        /// Tworzy listę rozwiązań wraz z nazwami stopów
        /// </summary>
        /// <param name="all">Lista stopów biorąca udział w procesie</param>
        /// <param name="solv">Solver zawierający wyniki</param>
        /// <returns>Lista rozwiązań</returns>
        private List <Solution> createSolution(List <Alloy> all, SimplexSolver solv)
        {
            List <Solution> sol = new List <Solution>();

            for (int i = 0; i < all.Count(); i++)
            {
                //Dla kazdego składnika weź wynik i stworz obiekt rozwiązanie
                double tmp = solver.GetValue(i).ToDouble();
                sol.Add(new Solution(all.ElementAt(i).name, tmp, tmp.ToString("0.00000")));
                total += tmp;
            }
            return(sol);
        }
Beispiel #4
0
        public void Generate()
        {
            // TODO: Int32 is overloading
            SimplexSolver solver = new SimplexSolver();

            mealPortions = new List <int>();
            int Calories, cost, Proteins, Carbohydrates, Fats;

            solver.AddRow("calories", out Calories);
            solver.SetIntegrality(Calories, true);
            solver.AddRow("proteins", out Proteins);
            solver.SetIntegrality(Calories, true);
            solver.AddRow("carbohydrates", out Carbohydrates);
            solver.SetIntegrality(Calories, true);
            solver.AddRow("fats", out Fats);
            solver.SetIntegrality(Fats, true);
            solver.AddRow("cost", out cost);

            Random rand = new Random();

            foreach (Meal m in this.meals)
            {
                int portions = new int();
                solver.AddVariable(m.Name, out portions);
                solver.SetBounds(portions, 0, 5);
                solver.SetIntegrality(portions, true);
                solver.SetCoefficient(Calories, portions, (int)m.Calories_Per_Portions);
                int prots = ((int)(m.Proteins * m.Portion_Size / 100) - this.proteins) * (-1);
                solver.SetCoefficient(Proteins, portions, prots);
                int carbs = ((int)(m.Carbohydrates * m.Portion_Size / 100) - this.carbohydrates) * (-1);
                solver.SetCoefficient(Carbohydrates, portions, carbs);
                int fa = ((int)(m.Fats * m.Portion_Size / 100) - this.fats) * (-1);
                solver.SetCoefficient(Fats, portions, fa);
                solver.SetCoefficient(cost, portions, rand.Next(0, 100));
                mealPortions.Add(portions);
            }

            solver.SetBounds(Calories, this.calories, this.calories);
            //solver.SetBounds(Proteins, 0, int.MaxValue);
            //solver.SetBounds(Carbohydrates, 0, int.MaxValue);
            //solver.SetBounds(Fats, 0, int.MaxValue);
            solver.AddGoal(cost, 1, true);
            solver.Solve(new SimplexSolverParams());
            for (int i = 0; i < this.mealPortions.Count; i++)
            {
                this.mealPortions[i] = (int)solver.GetValue(this.mealPortions[i]).ToDouble();
            }
        }
Beispiel #5
0
        static void Main(string[] args)
        {
            SimplexSolver solver = new SimplexSolver();
            int           savid, vzvid;

            solver.AddVariable("Saudi", out savid);
            solver.AddVariable("Ven", out vzvid);
            solver.SetBounds(savid, 0, 9000);
            solver.SetBounds(vzvid, 0, 6000);

            int c1rid, c2rid, c3rid, goalrid;

            solver.AddRow("c1", out c1rid);
            solver.AddRow("c2", out c2rid);
            solver.AddRow("c3", out c3rid);
            solver.AddRow("goal", out goalrid);

            // add coefficients to constraint rows
            solver.SetCoefficient(c1rid, savid, 0.3);
            solver.SetCoefficient(c1rid, vzvid, 0.4);
            solver.SetBounds(c1rid, 2000, Rational.PositiveInfinity);
            solver.SetCoefficient(c2rid, savid, 0.4);
            solver.SetCoefficient(c2rid, vzvid, 0.2);
            solver.SetBounds(c2rid, 1500, Rational.PositiveInfinity);
            solver.SetCoefficient(c3rid, savid, 0.2);
            solver.SetCoefficient(c3rid, vzvid, 0.3);
            solver.SetBounds(c3rid, 500, Rational.PositiveInfinity);

            // add objective (goal) to model and specify minimization (==true)
            solver.SetCoefficient(goalrid, savid, 20);
            solver.SetCoefficient(goalrid, vzvid, 15);
            solver.AddGoal(goalrid, 1, true);

            solver.Solve(new SimplexSolverParams());

            Console.WriteLine("SA {0}, VZ {1}, C1 {2}, C2 {3}, C3 {4}, Goal {5}",
                              solver.GetValue(savid).ToDouble(), solver.GetValue(vzvid).ToDouble(),
                              solver.GetValue(c1rid).ToDouble(), solver.GetValue(c2rid).ToDouble(),
                              solver.GetValue(c3rid).ToDouble(), solver.GetValue(goalrid).ToDouble());

            Console.ReadLine();
        }
Beispiel #6
0
        /// <summary>
        /// Solves a sample (randomly generated?) cutting stock problem.
        /// Given a bolt of cloth of fixed width, and demand for cut strips of the cloth, determine the min "loss" cut patterns to use and how many
        /// of them.
        /// Loss is defined as the scrap thrown away.
        /// It is acceptable to have extra cut widths made.  They do not contribute to the cost.  (this may be unrealistic in the real world)
        /// Solver runs by 1st creating an enumeration of possible cut patterns using a CspSolver, then choosing between the patterns and selecting a qty of the patterns such that the
        /// amount of scrap is minimized and all demand is met using the SimplexSolver MIP code.
        ///
        /// In an industrial case, there would likely be more constraints in the generation of the cut patterns.  There can be other restrictions such as "these can't be done together"
        /// or "these MUST be done together (matching pattern or color?)".  This can easily be added to the CspSolver model.
        /// Also, there are likely other characteristics of the cuts or the master problem which would need adaptations.
        ///
        /// Further, the limit on the columns generated is implemented in a very arbitrary order.  It is more likely that some ordering of the
        /// value of the columns is needed.  In most industrial occurances, the dual variables from the LP relaxation would likely be used to
        /// guide the generation of columns in an interative fasion rather than a one-time shot at the beginning.
        ///
        /// YMMV
        /// </summary>
        public static void ShortCuttingStock()
        {
            Console.WriteLine("*** Short Cutting Stock ***");
            int    NumItems    = 5;     // how many cut widths to generate
            int    ClothWidth  = 40;    // width of the stock to cut the widths from
            double efficiency  = 0.7;   // reject cut patterns less than this % used of the clothwidth
            int    maxPatterns = 100;   // max # of patterns to generate
            bool   verbose     = true;  // set this to true if you want some (useful?) output
            bool   saveMpsFile = false; // set this to true if you want it to save an mps file in c:\\temp\\cutstock.mps

            int itemSizeMin   = 5;      // minimum size for random generation of cut
            int itemSizeMax   = 10;     // maximum size for random generation of cut
            int itemDemandMin = 10;     // minimum random demand for each cut
            int itemDemandMax = 40;     // maximum random demand for each cut

            int seed = 12447;           // use System.DateTime.Now.Millisecond; instead if you want a random problem.

            if (verbose)
            {
                System.Console.WriteLine(String.Format("Random seed={0}\tmaxWidth={1}", seed, ClothWidth));
            }

            Random rand = new Random(seed);

            int[] cuts   = new int[NumItems];
            int[] demand = new int[NumItems];
            // item weights and demands
            for (int cnt = 0; cnt < NumItems; cnt++)
            {
                cuts[cnt]   = rand.Next(itemSizeMin, itemSizeMax);;
                demand[cnt] = rand.Next(itemDemandMin, itemDemandMax);
                if (verbose)
                {
                    System.Console.WriteLine(String.Format("item[{0}]\tweight={1}\tdemand={2}", cnt, cuts[cnt], demand[cnt]));
                }
            }
            List <int[]> patterns;

            SolveKnapsack(maxPatterns, cuts, ClothWidth, efficiency, out patterns);
            SimplexSolver solver2 = new SimplexSolver();
            int           vId     = 0;

            int[] usage = new int[patterns.Count];
            // construct rows that make sure that the demand is met for each kind of cut
            for (int cnt = 0; cnt < NumItems; cnt++)
            {
                solver2.AddRow(String.Format("item{0}", cnt), out vId);
                solver2.SetBounds(vId, demand[cnt], Rational.PositiveInfinity);
            }
            int patCnt = 0;

            if (verbose)
            {
                System.Console.WriteLine(String.Format("Generated {0} patterns", patterns.Count));
            }
            // set usage coeffs (A matrix entries) -- put the patterns as columns in the MIP.
            Dictionary <int, int> patIdForCol = new Dictionary <int, int>();

            foreach (int[] pattern in patterns)
            {
                int    pId     = 0;
                String varName = String.Format("Pattern{0}", patCnt);
                solver2.AddVariable(varName, out pId);
                patIdForCol[pId] = patCnt;
                solver2.SetIntegrality(pId, true);
                solver2.SetBounds(pId, 0, Rational.PositiveInfinity);
                for (int cnt = 0; cnt < NumItems; cnt++)
                {
                    solver2.SetCoefficient(cnt, pId, pattern[cnt]); // set the coefficient in the matrix
                                                                    // accumulate the quantity used for this pattern.  It will be used to figure out the scrap later.
                    usage[patCnt] += pattern[cnt] * cuts[cnt];
                }
                patCnt++;
            }
            // set objective coeffs.  --- the cost is the scrap
            solver2.AddRow("Scrap", out vId);
            for (int cnt = 0; cnt < patterns.Count; cnt++)
            {
                int colId = solver2.GetIndexFromKey(String.Format("Pattern{0}", cnt));
                solver2.SetCoefficient(vId, colId, (ClothWidth - usage[cnt]));
            }
            solver2.AddGoal(vId, 0, true);
            // invoke the IP solver.
            SimplexSolverParams parms = new SimplexSolverParams();

            parms.MixedIntegerGenerateCuts = true;
            parms.MixedIntegerPresolve     = true;

            if (saveMpsFile)
            {
                MpsWriter writer = new MpsWriter(solver2);
                using (TextWriter textWriter = new StreamWriter(File.OpenWrite("c:\\temp\\cutstock.mps")))
                {
                    writer.WriteMps(textWriter, true);
                }
            }
            solver2.Solve(parms);
            if (solver2.LpResult == LinearResult.Optimal &&
                solver2.MipResult == LinearResult.Optimal)
            {
                //Rational[] solutionVals = solver2.GetValues();
                int goalIndex = 0;
                // output if desired.
                if (verbose)
                {
                    System.Console.WriteLine("Solver complete, printing cut plan.");
                    foreach (int cnt in solver2.VariableIndices)
                    {
                        Rational val = solver2.GetValue(cnt);
                        if (val != 0)
                        {
                            if (solver2.IsGoal(cnt))
                            {
                                goalIndex = cnt;
                                System.Console.WriteLine(String.Format("Goal:{0}\t:   {1}\t", val, solver2.GetKeyFromIndex(cnt)));
                            }
                            else if (solver2.IsRow(cnt))
                            {
                                System.Console.WriteLine(String.Format("{0}:\tValue=   {1}\t", solver2.GetKeyFromIndex(cnt), val));
                            }
                            else
                            {
                                System.Console.Write(String.Format("{0}\tQuantity={1}:\t", solver2.GetKeyFromIndex(cnt), val));
                                for (int cnt2 = 0; cnt2 < NumItems; cnt2++)
                                {
                                    System.Console.Write(String.Format("{0} ", patterns[patIdForCol[cnt]][cnt2]));
                                }
                                System.Console.WriteLine(String.Format("\tUsage:{0} / {2} efficiency={1}%", usage[cnt - NumItems], (int)(100 * (double)usage[cnt - NumItems] / (double)ClothWidth), ClothWidth));
                            }
                        }
                    }
                    System.Console.WriteLine(String.Format("Total scrap={0}", solver2.GetSolutionValue(goalIndex)));
                }
            }
            else
            {
                System.Console.WriteLine("Generated problem is infeasible.  It is likely that more generated columns are needed.");
            }

            Console.WriteLine();
        }
Beispiel #7
0
        public List <Bag.Item> LinearProgramming(List <Item> items)
        {
            List <Bag.Item> choosenItems = new List <Bag.Item>();
            int             itemsCount   = items.Count;
            double          capacity     = MaxWeightAllowed;

            SimplexSolver solver = new SimplexSolver();

            //double[] estimatedProfitOfProjectX = new double[] { 1, 1.8, 1.6, 0.8, 1.4 };
            //double[] capitalRequiredForProjectX = new double[] { 6, 12, 10, 4, 8 };
            //double availableCapital = 20;
            //int[] chooseProjectX = new int[5];

            double[] values  = new double[itemsCount];
            double[] weights = new double[itemsCount];

            for (int i = 0; i < itemsCount; i++)
            {
                values[i]  = items[i].Value;
                weights[i] = items[i].Weight;
            }

            int[] chosenItems = new int[itemsCount];

            //int profit;
            //solver.AddRow("profit", out profit);
            //solver.AddGoal(profit, 0, false);

            int MaximumValue;

            solver.AddRow("MaximumValue", out MaximumValue);
            solver.AddGoal(MaximumValue, 0, false);

            //int expenditure;
            //solver.AddRow("expenditure", out expenditure);
            //solver.SetBounds(expenditure, 0, availableCapital);

            int MaximumWeight;

            solver.AddRow("MaximumWeight", out MaximumWeight);
            solver.SetBounds(MaximumWeight, 0, capacity);

            //for (int i = 0; i < 5; i++)
            //{
            //    solver.AddVariable(string.Format("project{0}", i),
            //                        out chooseProjectX[i]);
            //    solver.SetBounds(chooseProjectX[i], 0, 1);
            //    solver.SetIntegrality(chooseProjectX[i], true);
            //    solver.SetCoefficient(profit, chooseProjectX[i],
            //                           estimatedProfitOfProjectX[i]);
            //    solver.SetCoefficient(expenditure, chooseProjectX[i],
            //                           capitalRequiredForProjectX[i]);
            //}

            for (int i = 0; i < itemsCount; i++)
            {
                solver.AddVariable(string.Format("Item{0}", i),
                                   out chosenItems[i]);
                solver.SetBounds(chosenItems[i], 0, 1);
                solver.SetIntegrality(chosenItems[i], true);
                solver.SetCoefficient(MaximumValue, chosenItems[i],
                                      values[i]);
                solver.SetCoefficient(MaximumWeight, chosenItems[i],
                                      weights[i]);
            }

            //SimplexSolverParams param = new SimplexSolverParams();
            //param.MixedIntegerGenerateCuts = true;
            //solver.Solve(param);

            SimplexSolverParams param = new SimplexSolverParams();

            param.MixedIntegerGenerateCuts = true;
            solver.Solve(param);

            //Console.WriteLine(solver.MipResult);
            //for (int i = 0; i < 5; i++)
            //{
            //    Console.WriteLine("Project {0} is {1} selected.", i,
            //                    solver.GetValue(chooseProjectX[i]) == 1 ? "" : "not ");
            //}
            //Console.WriteLine("The estimated total profit is: ${0} million.",
            //                  (double)solver.GetValue(profit).ToDouble());
            //Console.WriteLine("The total expenditure is: ${0} million.",
            //                   solver.GetValue(expenditure).ToDouble());

            //string result = "";
            for (int i = 0; i < itemsCount; i++)
            {
                if (solver.GetValue(chosenItems[i]) == 1)
                {
                    //result += "Selected Item " + i + " ";
                    choosenItems.Add(items[i]);
                }
            }

            //result += " value "+(double)solver.GetValue(MaximumValue).ToDouble()+ " weight "+ solver.GetValue(MaximumWeight).ToDouble();


            return(choosenItems);
        }
        public static RecipeGraph FromLibrary(Library library, IEnumerable <Item> inputs, IEnumerable <ItemAmount> outputs, Func <Item, double> costFunction)
        {
            if (library == null)
            {
                throw new ArgumentNullException("library");
            }
            if (inputs == null)
            {
                throw new ArgumentNullException("inputs");
            }
            if (outputs == null)
            {
                throw new ArgumentNullException("outputs");
            }
            if (costFunction == null)
            {
                throw new ArgumentNullException("costFunction");
            }

            var solver     = new SimplexSolver();
            var itemRows   = new Dictionary <Item, int>();
            var recipeVars = new Dictionary <Recipe, int>();
            var wasteGoals = new Dictionary <Item, ILinearGoal>();

            foreach (var item in library.Items)
            {
                int id;
                solver.AddRow(item, out id);
                itemRows.Add(item, id);
                solver.SetBounds(id, 0, Rational.PositiveInfinity);
                if (!inputs.Contains(item))
                {
                    wasteGoals.Add(item, solver.AddGoal(id, 1, true));
                }
            }

            // Bound output to requested values
            foreach (var itemAmount in outputs)
            {
                var item   = itemAmount.Item;
                var amount = itemAmount.Amount;
                solver.SetBounds(itemRows[item], amount, amount);
            }

            foreach (var recipe in library.Recipes)
            {
                int id;
                solver.AddVariable(recipe, out id);
                recipeVars.Add(recipe, id);
                solver.SetBounds(id, 0, Rational.PositiveInfinity);

                foreach (var input in recipe.Ingredients)
                {
                    solver.SetCoefficient(itemRows[input.Item], id, -input.Amount);
                }
                foreach (var output in recipe.Results)
                {
                    solver.SetCoefficient(itemRows[output.Item], id, output.Amount);
                }
            }

            // Add input minimize goals
            foreach (var item in inputs)
            {
                var row = itemRows[item];
                solver.SetBounds(row, Rational.NegativeInfinity, 0);
                solver.AddGoal(row, (int)(10000 * costFunction(item)), false);
            }

            solver.Solve(new SimplexSolverParams());

            if (solver.SolutionQuality != Microsoft.SolverFoundation.Services.LinearSolutionQuality.Exact)
            {
                throw new InvalidOperationException("Cannot solve problem");
            }

            List <Tuple <Recipe, double> > usedRecipes = new List <Tuple <Recipe, double> >();

            foreach (var recipe in library.Recipes)
            {
                var value = (double)solver.GetValue(recipeVars[recipe]);
                if (value > 0)
                {
                    usedRecipes.Add(new Tuple <Recipe, double>(recipe, value));
                }
            }

            var sortedRecipes = usedRecipes.SortTopological((a, b) => a.Item1.Results.Select((i) => i.Item).Intersect(b.Item1.Ingredients.Select((i) => i.Item)).Any(), true);
            List <SourceStep>           inputSteps     = new List <SourceStep>();
            List <SinkStep>             outputSteps    = new List <SinkStep>();
            List <SinkStep>             wasteSteps     = new List <SinkStep>();
            Dictionary <Item, FlowStep> itemSteps      = new Dictionary <Item, FlowStep>();
            List <FlowStep>             flowSteps      = new List <FlowStep>();
            List <TransformStep>        transformSteps = new List <TransformStep>();

            foreach (var item in library.Items)
            {
                var value = (double)solver.GetValue(itemRows[item]);
                if (value > 0)
                {
                    var sink = new SinkStep(new ItemAmount(item, value / 2));
                    if (outputs.Select((o) => o.Item).Contains(item))
                    {
                        outputSteps.Add(sink);
                    }
                    else
                    {
                        wasteSteps.Add(sink);
                    }
                    itemSteps.Add(item, sink);
                }
                else if (value < 0)
                {
                    var source = new SourceStep(new ItemAmount(item, -value));
                    inputSteps.Add(source);
                    itemSteps.Add(item, source);
                }
            }

            foreach (var recipe in sortedRecipes)
            {
                foreach (var result in recipe.Item1.Results)
                {
                    var item = result.Item;
                    if (!itemSteps.ContainsKey(item))
                    {
                        var flowstep = new FlowStep(new ItemAmount(item, 0));
                        itemSteps.Add(item, flowstep);
                        flowSteps.Add(flowstep);
                    }
                }
            }

            foreach (var recipe in sortedRecipes)
            {
                var previous = recipe.Item1.Ingredients.Select((i) => i.Item);
                var step     = new TransformStep(recipe.Item1, recipe.Item2);
                foreach (var item in previous)
                {
                    var prev = itemSteps[item];
                    step.Previous.Add(prev);
                }

                foreach (var amount in recipe.Item1.Results)
                {
                    var item = amount.Item;

                    itemSteps[item].Previous.Add(step);
                    itemSteps[item].Item += amount * recipe.Item2;
                }
                transformSteps.Add(step);
            }

            return(new RecipeGraph(wasteSteps, inputSteps, outputSteps, flowSteps, transformSteps));
        }