private void DisposeDirectXResources()
{
_textFormat.Dispose();
_dwFactory.Dispose();
_renderTarget.Dispose();
_renderTargetView.Dispose();
_d2DFactory.Dispose();
_swapChain.Dispose();
_d3DDeviceContext.Dispose();
_d3DDevice.Dispose();
}
public void Dispose()
{
//d3dFactory.Dispose();
surface.Dispose();
d2dFactory.Dispose();
d2dRenderTarget.Dispose();
d3dDevice.Dispose();
d3dContext.Dispose();
swapChain.Dispose();
target.Dispose();
targetView.Dispose();
}
public virtual void Dispose()
{
foreach (var state in rasterizerStates)
{
state.Value.Dispose();
}
foreach (var state in blendStates)
{
state.Value.Dispose();
}
foreach (var state in depthStencilStates)
{
state.Value.Dispose();
}
d2DFactory.Dispose();
}
private void LoadPipeline(RenderForm form)
{
int width = form.ClientSize.Width;
int height = form.ClientSize.Height;
viewport.Width = width;
viewport.Height = height;
viewport.MaxDepth = 1.0f;
scissorRect.Right = width;
scissorRect.Bottom = height;
#if DEBUG
// Enable the D3D12 debug layer.
{
DebugInterface.Get().EnableDebugLayer();
}
#endif
device = new Device(null, SharpDX.Direct3D.FeatureLevel.Level_12_0);
using (var factory = new Factory4())
{
// Describe and create the command queue.
CommandQueueDescription queueDesc = new CommandQueueDescription(CommandListType.Direct);
commandQueue = device.CreateCommandQueue(queueDesc);
// Describe and create the swap chain.
SwapChainDescription swapChainDesc = new SwapChainDescription()
{
BufferCount = FrameCount,
ModeDescription = new ModeDescription(width, height, new Rational(60, 1), Format.R8G8B8A8_UNorm),
Usage = Usage.RenderTargetOutput,
SwapEffect = SwapEffect.FlipDiscard,
OutputHandle = form.Handle,
//Flags = SwapChainFlags.None,
SampleDescription = new SampleDescription(1, 0),
IsWindowed = true
};
SwapChain tempSwapChain = new SwapChain(factory, commandQueue, swapChainDesc);
swapChain = tempSwapChain.QueryInterface<SwapChain3>();
tempSwapChain.Dispose();
frameIndex = swapChain.CurrentBackBufferIndex;
}
// Create descriptor heaps.
// Describe and create a render target view (RTV) descriptor heap.
DescriptorHeapDescription rtvHeapDesc = new DescriptorHeapDescription()
{
DescriptorCount = FrameCount,
Flags = DescriptorHeapFlags.None,
Type = DescriptorHeapType.RenderTargetView
};
renderTargetViewHeap = device.CreateDescriptorHeap(rtvHeapDesc);
rtvDescriptorSize = device.GetDescriptorHandleIncrementSize(DescriptorHeapType.RenderTargetView);
//Init Direct3D11 device from Direct3D12 device
device11 = SharpDX.Direct3D11.Device.CreateFromDirect3D12(device, SharpDX.Direct3D11.DeviceCreationFlags.BgraSupport, null, null, commandQueue);
deviceContext11 = device11.ImmediateContext;
device11on12 = device11.QueryInterface<SharpDX.Direct3D11.ID3D11On12Device>();
var d2dFactory = new SharpDX.Direct2D1.Factory(SharpDX.Direct2D1.FactoryType.MultiThreaded);
// Create frame resources.
CpuDescriptorHandle rtvHandle = renderTargetViewHeap.CPUDescriptorHandleForHeapStart;
for (int n = 0; n < FrameCount; n++)
{
renderTargets[n] = swapChain.GetBackBuffer<Resource>(n);
device.CreateRenderTargetView(renderTargets[n], null, rtvHandle);
rtvHandle += rtvDescriptorSize;
//init Direct2D surfaces
SharpDX.Direct3D11.D3D11ResourceFlags format = new SharpDX.Direct3D11.D3D11ResourceFlags()
{
BindFlags = (int)SharpDX.Direct3D11.BindFlags.RenderTarget,
CPUAccessFlags = (int)SharpDX.Direct3D11.CpuAccessFlags.None
};
device11on12.CreateWrappedResource(
renderTargets[n], format,
(int)ResourceStates.Present,
(int)ResourceStates.RenderTarget,
typeof(SharpDX.Direct3D11.Resource).GUID,
out wrappedBackBuffers[n]);
//Init direct2D surface
var d2dSurface = wrappedBackBuffers[n].QueryInterface<Surface>();
direct2DRenderTarget[n] = new SharpDX.Direct2D1.RenderTarget(d2dFactory, d2dSurface, new SharpDX.Direct2D1.RenderTargetProperties(new SharpDX.Direct2D1.PixelFormat(Format.Unknown, SharpDX.Direct2D1.AlphaMode.Premultiplied)));
d2dSurface.Dispose();
}
commandAllocator = device.CreateCommandAllocator(CommandListType.Direct);
d2dFactory.Dispose();
//Init font
var directWriteFactory = new SharpDX.DirectWrite.Factory();
textFormat = new SharpDX.DirectWrite.TextFormat(directWriteFactory, "Arial", SharpDX.DirectWrite.FontWeight.Bold, SharpDX.DirectWrite.FontStyle.Normal, 48) { TextAlignment = SharpDX.DirectWrite.TextAlignment.Leading, ParagraphAlignment = SharpDX.DirectWrite.ParagraphAlignment.Near };
textBrush = new SharpDX.Direct2D1.SolidColorBrush(direct2DRenderTarget[0], Color.White);
directWriteFactory.Dispose();
}
private void LoadPipeline(RenderForm form)
{
int width = form.ClientSize.Width;
int height = form.ClientSize.Height;
viewport.Width = width;
viewport.Height = height;
viewport.MaxDepth = 1.0f;
scissorRect.Right = width;
scissorRect.Bottom = height;
#if DEBUG
// Enable the D3D12 debug layer.
{
DebugInterface.Get().EnableDebugLayer();
}
#endif
device = new Device(null, SharpDX.Direct3D.FeatureLevel.Level_12_0);
using (var factory = new Factory4())
{
// Describe and create the command queue.
CommandQueueDescription queueDesc = new CommandQueueDescription(CommandListType.Direct);
commandQueue = device.CreateCommandQueue(queueDesc);
// Describe and create the swap chain.
SwapChainDescription swapChainDesc = new SwapChainDescription()
{
BufferCount = FrameCount,
ModeDescription = new ModeDescription(width, height, new Rational(60, 1), Format.R8G8B8A8_UNorm),
Usage = Usage.RenderTargetOutput,
SwapEffect = SwapEffect.FlipDiscard,
OutputHandle = form.Handle,
//Flags = SwapChainFlags.None,
SampleDescription = new SampleDescription(1, 0),
IsWindowed = true
};
SwapChain tempSwapChain = new SwapChain(factory, commandQueue, swapChainDesc);
swapChain = tempSwapChain.QueryInterface <SwapChain3>();
tempSwapChain.Dispose();
frameIndex = swapChain.CurrentBackBufferIndex;
}
// Create descriptor heaps.
// Describe and create a render target view (RTV) descriptor heap.
DescriptorHeapDescription rtvHeapDesc = new DescriptorHeapDescription()
{
DescriptorCount = FrameCount,
Flags = DescriptorHeapFlags.None,
Type = DescriptorHeapType.RenderTargetView
};
renderTargetViewHeap = device.CreateDescriptorHeap(rtvHeapDesc);
rtvDescriptorSize = device.GetDescriptorHandleIncrementSize(DescriptorHeapType.RenderTargetView);
//Init Direct3D11 device from Direct3D12 device
device11 = SharpDX.Direct3D11.Device.CreateFromDirect3D12(device, SharpDX.Direct3D11.DeviceCreationFlags.BgraSupport, null, null, commandQueue);
deviceContext11 = device11.ImmediateContext;
device11on12 = device11.QueryInterface <SharpDX.Direct3D11.ID3D11On12Device>();
var d2dFactory = new SharpDX.Direct2D1.Factory(SharpDX.Direct2D1.FactoryType.MultiThreaded);
// Create frame resources.
CpuDescriptorHandle rtvHandle = renderTargetViewHeap.CPUDescriptorHandleForHeapStart;
for (int n = 0; n < FrameCount; n++)
{
renderTargets[n] = swapChain.GetBackBuffer <Resource>(n);
device.CreateRenderTargetView(renderTargets[n], null, rtvHandle);
rtvHandle += rtvDescriptorSize;
//init Direct2D surfaces
SharpDX.Direct3D11.D3D11ResourceFlags format = new SharpDX.Direct3D11.D3D11ResourceFlags()
{
BindFlags = (int)SharpDX.Direct3D11.BindFlags.RenderTarget,
CPUAccessFlags = (int)SharpDX.Direct3D11.CpuAccessFlags.None
};
device11on12.CreateWrappedResource(
renderTargets[n], format,
(int)ResourceStates.Present,
(int)ResourceStates.RenderTarget,
typeof(SharpDX.Direct3D11.Resource).GUID,
out wrappedBackBuffers[n]);
//Init direct2D surface
var d2dSurface = wrappedBackBuffers[n].QueryInterface <Surface>();
direct2DRenderTarget[n] = new SharpDX.Direct2D1.RenderTarget(d2dFactory, d2dSurface, new SharpDX.Direct2D1.RenderTargetProperties(new SharpDX.Direct2D1.PixelFormat(Format.Unknown, SharpDX.Direct2D1.AlphaMode.Premultiplied)));
d2dSurface.Dispose();
}
commandAllocator = device.CreateCommandAllocator(CommandListType.Direct);
d2dFactory.Dispose();
//Init font
var directWriteFactory = new SharpDX.DirectWrite.Factory();
textFormat = new SharpDX.DirectWrite.TextFormat(directWriteFactory, "Arial", SharpDX.DirectWrite.FontWeight.Bold, SharpDX.DirectWrite.FontStyle.Normal, 48)
{
TextAlignment = SharpDX.DirectWrite.TextAlignment.Leading, ParagraphAlignment = SharpDX.DirectWrite.ParagraphAlignment.Near
};
textBrush = new SharpDX.Direct2D1.SolidColorBrush(direct2DRenderTarget[0], Color.White);
directWriteFactory.Dispose();
}