void theSaddleVisual_Saddle_Selected(SaddleBase theSaddleInfo) { try { if (Saddle_Selected != null) { Saddle_Selected(theSaddleInfo.Clone()); } } catch (Exception ex) {} }
public void refreshControl(SaddleBase theSaddle, long baySpaceX, long baySpaceY, int panelWidth, int panelHeight, bool xAxisRight, bool yAxisDown) { try { //计算X方向上的比例关系 double xScale = Convert.ToDouble(panelWidth) / Convert.ToDouble(baySpaceX); double location_X = 0; if (xAxisRight == true) { location_X = Convert.ToDouble(theSaddle.X_Center - theSaddle.SaddleLength / 2) * xScale; } else { location_X = Convert.ToDouble(baySpaceX - (theSaddle.X_Center + theSaddle.SaddleLength / 2)) * xScale; } //计算Y方向的比例关系 double yScale = Convert.ToDouble(panelHeight) / Convert.ToDouble(baySpaceY); double location_Y = 0; if (yAxisDown == true) { location_Y = (theSaddle.Y_Center - theSaddle.SaddleWidth / 2) * yScale; } else { location_Y = (baySpaceY - (theSaddle.Y_Center + theSaddle.SaddleWidth / 2)) * yScale; } //修改鞍座控件的宽度和高度 this.Width = Convert.ToInt32(theSaddle.SaddleWidth * xScale); this.Height = Convert.ToInt32(theSaddle.SaddleLength * yScale); //定位库位鞍座的坐标 this.Location = new Point(Convert.ToInt32(location_X), Convert.ToInt32(location_Y)); toolTip1.IsBalloon = true; toolTip1.ReshowDelay = 0; toolTip1.SetToolTip(this, "鞍座号:" + theSaddle.SaddleNo.ToString() + "\r" + "钢卷号:" + theSaddle.CoilNO + "\r" + "占位值:" + theSaddle.TagVal_IsOccupied + "\r" + "锁定请求:" + theSaddle.Tag_Lock_Request_Value + "\r" + "坐标:" + "\r" + "X = " + theSaddle.X_Center + "\r" + "Y = " + theSaddle.Y_Center + "\r" + "------------------------" + "\r" + "出口占位为1,入口占位为0" + "\r" + "黑色代表有占位有卷号" + "\r" + "橙色代表占位、卷号只有其中一个" + "\r" + "红色代表机组鞍座已锁定" + "\r" ); //出口机组占位值 if (theSaddle.SaddleNo.IndexOf("C") > -1) { if (!string.IsNullOrEmpty(theSaddle.CoilNO.Trim())) { if (theSaddle.TagVal_IsOccupied == 1) { this.BackColor = Color.Black; } else { this.BackColor = Color.Blue; } } else { if (theSaddle.TagVal_IsOccupied == 1) { this.BackColor = Color.Blue; } else { this.BackColor = Color.White; } } } else if (theSaddle.SaddleNo.IndexOf("R") > -1) //入口机组占位值 { //钢卷不为空 if (!string.IsNullOrEmpty(theSaddle.CoilNO.Trim())) { //特殊情况(鞍座没有占位) if (theSaddle.SaddleNo.Trim() == "D413SR1A00") { this.BackColor = Color.Black; } else { // 鞍座有占位 if (theSaddle.TagVal_IsOccupied == 0) { this.BackColor = Color.Black; } else { this.BackColor = Color.Blue; } } } else { if (theSaddle.TagVal_IsOccupied == 0) { ////特殊情况(鞍座没有占位) if (theSaddle.SaddleNo.Trim() == "D308WR1A05") //特殊情况 { this.BackColor = Color.White; } else { this.BackColor = Color.Blue; } } else { this.BackColor = Color.White; } } } //已锁定机组鞍座 if (theSaddle.Tag_IsLocked_Value == 1) { this.BackColor = Color.Red; } //X或Y等于小于 0时,不显示 if (theSaddle.X_Center == 0 || theSaddle.Y_Center == 0) { this.Visible = false; } } catch (Exception ex) { LogManager.WriteProgramLog(ex.Message); LogManager.WriteProgramLog(ex.StackTrace); } }
public void refreshControl(SaddleBase theSaddle, long baySpaceX, long baySpaceY, int panelWidth, int panelHeight, bool xAxisRight, bool yAxisDown) { try { //计算X方向上的比例关系 double xScale = Convert.ToDouble(panelWidth) / Convert.ToDouble(baySpaceX); //计算控件行车中心X,区分为X坐标轴向左或者向右 double location_X = 0; if (xAxisRight == true) { location_X = Convert.ToDouble(theSaddle.X_Center - theSaddle.SaddleLength / 2) * xScale; } else { location_X = Convert.ToDouble(baySpaceX - (theSaddle.X_Center + theSaddle.SaddleLength / 2)) * xScale; } //计算Y方向的比例关系 double yScale = Convert.ToDouble(panelHeight) / Convert.ToDouble(baySpaceY); //计算行车中心Y 区分Y坐标轴向上或者向下 double location_Y = 0; if (yAxisDown == true) { location_Y = (theSaddle.Y_Center - theSaddle.SaddleWidth / 2) * yScale; } else { location_Y = (baySpaceY - (theSaddle.Y_Center + theSaddle.SaddleWidth / 2)) * yScale; } //修改鞍座控件的宽度和高度 this.Width = Convert.ToInt32(theSaddle.SaddleWidth * xScale); this.Height = Convert.ToInt32(theSaddle.SaddleLength * yScale); if (theSaddle.Stock_Status == 0 && theSaddle.Lock_Flag == 0) //无卷可用 { this.BackColor = Color.White; } else if (theSaddle.Stock_Status == 2 && theSaddle.Lock_Flag == 0) //有卷可用 { this.BackColor = Color.Black; } else { this.BackColor = Color.Red; } //定位库位鞍座的坐标 this.Location = new Point(Convert.ToInt32(location_X), Convert.ToInt32(location_Y)); toolTip1.IsBalloon = true; toolTip1.ReshowDelay = 0; toolTip1.SetToolTip(this, "材料号:" + theSaddle.Mat_No + "\r" + "库位: " + theSaddle.SaddleNo.ToString() + "\r" + theSaddle.Row_No.ToString() + "行" + "-" + theSaddle.Col_No.ToString() + "列," + "\r" + "坐标:" + "\r" + "X = " + theSaddle.X_Center + "\r" + "Y = " + theSaddle.Y_Center + "\r" + "下道机组: " + theSaddle.Next_Unit_No + "\r"); } catch (Exception ex) { } }
public void refreshControl(SaddleBase theSaddle, long baySpaceX, long baySpaceY, int panelWidth, int panelHeight, bool xAxisRight, bool yAxisDown) { try { //计算X方向上的比例关系 double xScale = Convert.ToDouble(panelWidth) / Convert.ToDouble(baySpaceX); double location_X = 0; if (xAxisRight == true) { location_X = Convert.ToDouble(theSaddle.XCENTER - theSaddle.STOCK_LENGTH / 2) * xScale; } else { location_X = Convert.ToDouble(baySpaceX - (theSaddle.XCENTER + theSaddle.STOCK_LENGTH / 2)) * xScale; } //计算Y方向的比例关系 double yScale = Convert.ToDouble(panelHeight) / Convert.ToDouble(baySpaceY); double location_Y = 0; if (yAxisDown == true) { location_Y = (theSaddle.YCENTER - theSaddle.SaddleWidth) * yScale; } else { location_Y = (baySpaceY - (theSaddle.YCENTER + theSaddle.SaddleWidth)) * yScale; } //修改鞍座控件的宽度和高度 this.Width = Convert.ToInt32(theSaddle.STOCK_LENGTH * xScale); this.Height = Convert.ToInt32(800 * yScale); //定位库位鞍座的坐标 this.Location = new Point(Convert.ToInt32(location_X), Convert.ToInt32(location_Y)); if (theSaddle.CoilNO == "" && theSaddle.CoilNO1 == "") { lblMatNo2.Visible = false; lblMatNo1.Visible = false; } else if (theSaddle.CoilNO == "" || theSaddle.CoilNO1 == "") { lblMatNo2.Visible = false; toolTip1.IsBalloon = true; toolTip1.ReshowDelay = 0; toolTip1.AutoPopDelay = 5000; toolTip1.InitialDelay = 0; toolTip1.ShowAlways = true; toolTip1.SetToolTip(lblMatNo1, "鞍座号:" + theSaddle.STOCK_NO.ToString() + "\r" + "方坯号1:" + theSaddle.CoilNO + "\r" + "方坯号2:" + theSaddle.CoilNO1 + "\r" //+ "占位值:" + theSaddle.TagVal_IsOccupied + "\r" //+ "锁定请求:" + theSaddle.Tag_Lock_Request_Value + "\r" + "坐标:" + "\r" + "X = " + theSaddle.XCENTER + "\r" + "Y = " + theSaddle.YCENTER + "\r" //+ "------------------------" + "\r" //+ "出口占位为1,入口占位为0" + "\r" //+ "黑色代表有占位有卷号" + "\r" //+ "橙色代表占位、卷号只有其中一个" + "\r" //+ "红色代表机组鞍座已锁定" + "\r" ); } else { toolTip1.IsBalloon = true; toolTip1.ReshowDelay = 0; toolTip1.AutoPopDelay = 5000; toolTip1.InitialDelay = 0; toolTip1.ShowAlways = true; toolTip1.SetToolTip(lblMatNo1, "鞍座号:" + theSaddle.STOCK_NO.ToString() + "\r" + "方坯号1:" + theSaddle.CoilNO + "\r" + "方坯号2:" + theSaddle.CoilNO1 + "\r" //+ "占位值:" + theSaddle.TagVal_IsOccupied + "\r" //+ "锁定请求:" + theSaddle.Tag_Lock_Request_Value + "\r" + "坐标:" + "\r" + "X = " + theSaddle.XCENTER + "\r" + "Y = " + theSaddle.YCENTER + "\r" //+ "------------------------" + "\r" //+ "出口占位为1,入口占位为0" + "\r" //+ "黑色代表有占位有卷号" + "\r" //+ "橙色代表占位、卷号只有其中一个" + "\r" //+ "红色代表机组鞍座已锁定" + "\r" ); toolTip1.SetToolTip(lblMatNo2, "鞍座号:" + theSaddle.STOCK_NO.ToString() + "\r" + "方坯号1:" + theSaddle.CoilNO + "\r" + "方坯号2:" + theSaddle.CoilNO1 + "\r" //+ "占位值:" + theSaddle.TagVal_IsOccupied + "\r" //+ "锁定请求:" + theSaddle.Tag_Lock_Request_Value + "\r" + "坐标:" + "\r" + "X = " + theSaddle.XCENTER + "\r" + "Y = " + theSaddle.YCENTER + "\r" //+ "------------------------" + "\r" //+ "出口占位为1,入口占位为0" + "\r" //+ "黑色代表有占位有卷号" + "\r" //+ "橙色代表占位、卷号只有其中一个" + "\r" //+ "红色代表机组鞍座已锁定" + "\r" ); }; ////出口机组占位值 //if (theSaddle.SaddleNo.IndexOf("C") > -1) //{ // if (!string.IsNullOrEmpty(theSaddle.CoilNO.Trim())) // { // if (theSaddle.TagVal_IsOccupied == 1) // { // this.BackColor = Color.Black; // } // else // { // this.BackColor = Color.LightSalmon; // } // } // else // { // if (theSaddle.TagVal_IsOccupied == 1) // { // this.BackColor = Color.LightSalmon; // } // else // { // this.BackColor = Color.White; // } // } //} //else if (theSaddle.SaddleNo.IndexOf("R") > -1) //入口机组占位值 //{ // //钢卷不为空 // if (!string.IsNullOrEmpty(theSaddle.CoilNO.Trim())) // { // //特殊情况(鞍座没有占位) // if (theSaddle.SaddleNo.Trim() == "D413SR1A00" || theSaddle.SaddleNo.Trim() == "D413SR1A01" || theSaddle.SaddleNo.Trim() == "D413SR1A02" || theSaddle.SaddleNo.Trim() == "D413SR1A03" || // theSaddle.SaddleNo.Trim() == "D413SR1A04" || theSaddle.SaddleNo.Trim() == "D413SR1A06" || theSaddle.SaddleNo.Trim() == "D413SR1A07" || theSaddle.SaddleNo.Trim() == "D413SR1A08" || // theSaddle.SaddleNo.Trim() == "D413SR1A09") // { // this.BackColor = Color.Black; // } // else // { // // 鞍座有占位 // if (theSaddle.TagVal_IsOccupied == 0) // { // this.BackColor = Color.Black; // } // else // { // this.BackColor = Color.LightSalmon; // } // } // } // else // { // if (theSaddle.TagVal_IsOccupied == 0) // { // ////特殊情况(鞍座没有占位) // if (theSaddle.SaddleNo.Trim() == "D308WR1A05" || theSaddle.SaddleNo.Trim() == "D413SR1A00" || theSaddle.SaddleNo.Trim() == "D413SR1A01" || theSaddle.SaddleNo.Trim() == "D413SR1A02" || theSaddle.SaddleNo.Trim() == "D413SR1A03" || // theSaddle.SaddleNo.Trim() == "D413SR1A04" || theSaddle.SaddleNo.Trim() == "D413SR1A06" || theSaddle.SaddleNo.Trim() == "D413SR1A07" || theSaddle.SaddleNo.Trim() == "D413SR1A08" || // theSaddle.SaddleNo.Trim() == "D413SR1A09") //特殊情况 // this.BackColor = Color.White; // else // this.BackColor = Color.LightSalmon; // } // else // { // this.BackColor = Color.White; // } // } //} ////已锁定机组鞍座 //if (theSaddle.Tag_IsLocked_Value == 1) //{ // this.BackColor = Color.Red; //} //X或Y等于小于 0时,不显示 // || theSaddle.XCENTER == 999999 || theSaddle.YCENTER == 999999 if (theSaddle.XCENTER == 0 || theSaddle.YCENTER == 0) { this.Visible = false; } } catch (Exception ex) { LogManager.WriteProgramLog(ex.Message); LogManager.WriteProgramLog(ex.StackTrace); } }
public void refreshControl(SaddleBase theSaddle, double X_Width, double Y_Height, AreaBase theArea, int panelWidth, int panelHeight, bool xAxisRight, bool yAxisDown, Panel panel, long baySpaceX, long baySpaceY) { try { //附对象 mySaddleInfo = theSaddle; width = panelWidth; height = panelHeight; //计算X方向上的比例关系 double xScale; if (theArea.AreaNo == "EY1" || theArea.AreaNo == "EY2" || theArea.AreaNo == "EY3") { xScale = Convert.ToDouble(panelWidth - 150) / Convert.ToDouble(X_Width); } else { xScale = Convert.ToDouble(panelWidth - 10) / Convert.ToDouble(X_Width); } double location_X = 0; if (xAxisRight == true) { location_X = Convert.ToDouble((theSaddle.X_Center - theSaddle.SaddleLength / 2) - theArea.X_Start) * xScale; } else { location_X = Convert.ToDouble(Math.Abs((theArea.X_End - (theSaddle.X_Center - theSaddle.SaddleLength / 2)))) * xScale; } //计算Y方向的比例关系 double yScale; if (theArea.AreaNo == "EY1" || theArea.AreaNo == "EY2" || theArea.AreaNo == "EY3") { yScale = Convert.ToDouble(panelHeight - 90) / Convert.ToDouble(Y_Height); } else { yScale = Convert.ToDouble(panelHeight) / Convert.ToDouble(Y_Height); } double location_Y = 0; if (yAxisDown == true) { location_Y = ((theSaddle.Y_Center - theSaddle.SaddleWidth / 2) - theArea.Y_Start) * yScale; } else { location_Y = Convert.ToDouble(theArea.Y_End - (theSaddle.Y_Center - theSaddle.SaddleWidth / 2)) * yScale; } Location_X = (int)location_X; Location_Y = (int)location_Y; if (theSaddle.Stock_Status == 0 && theSaddle.Lock_Flag == 0) //无卷可用 { this.BackColor = Color.White; } else if (theSaddle.Stock_Status == 2 && theSaddle.Lock_Flag == 0) //有卷可用 { //区分机组 if (theSaddle.Next_Unit_No == "D118" || theSaddle.Next_Unit_No == "D218") { this.BackColor = Color.Yellow; } else if (theSaddle.Next_Unit_No == "D308" || theSaddle.Next_Unit_No == "D212") { this.BackColor = Color.Green; } else { this.BackColor = Color.Black; } } else { this.BackColor = Color.Red; } //修改鞍座控件的宽度和高度 this.Width = Convert.ToInt32(theSaddle.SaddleWidth * xScale); this.Height = Convert.ToInt32(theSaddle.SaddleLength * yScale); //定位库位鞍座的坐标 if (theSaddle.Layer_Num == 2) { this.Location = new Point(Convert.ToInt32(location_X), Convert.ToInt32(location_Y) - 20); } else { this.Location = new Point(Convert.ToInt32(location_X), Convert.ToInt32(location_Y)); } this.BringToFront(); //if (theSaddle.SaddleNo.Substring( Convert.ToInt32( theSaddle.SaddleNo.Length.ToString()) - 1,1) == "2") // this.BorderStyle = BorderStyle.Fixed3D; //else this.BorderStyle = BorderStyle.None; gr = panel.CreateGraphics(); panel.Paint += panel_Paint; this.panel1.Paint += conStockSaddle_Paint; toolTip1.IsBalloon = true; toolTip1.ReshowDelay = 0; toolTip1.SetToolTip(this.panel1, "材料号:" + theSaddle.Mat_No + "\r" + "库位: " + theSaddle.SaddleNo.ToString() + "\r" + theSaddle.Row_No.ToString() + "行" + "-" + theSaddle.Col_No.ToString() + "列," + "\r" + "坐标:" + "\r" + "X = " + theSaddle.X_Center + "\r" + "Y = " + theSaddle.Y_Center + "\r" + "Z = " + theSaddle.Z_Center + "\r" + "下道机组: " + theSaddle.Next_Unit_No + "\r" ); } catch (Exception er) { throw; } }