public void AddConsultation(FLOW_CONSULTATION_T flowConsultation, SubmitData submitData)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
s2.AddConsultation(con,flowConsultation, submitData);
#region 旧代码
//if (strIsFlowEngine.ToLower() == "true")
//{
// try
// {
// flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T =
// FlowBLL.GetFLOW_FLOWRECORDMASTER_T(flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FLOWRECORDMASTERID);
// FlowEngineService.EngineWcfGlobalFunctionClient FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
// FlowEngineService.CustomUserMsg[] cs = new FlowEngineService.CustomUserMsg[1];
// FlowEngineService.CustomUserMsg cu = new FlowEngineService.CustomUserMsg();
// cu.FormID = flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID;
// cu.UserID = flowConsultation.REPLYUSERID;
// cs[0] = cu;
// ModelInfo modelinfo = FlowBLL.GetSysCodeByModelCode(submitData.ModelCode);
// MessageData tmpMessageData = new MessageData("Flow", modelinfo.SysCode,
// flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID,
// submitData.ModelCode, modelinfo.ModelName, submitData.FormID, flowConsultation.FLOW_FLOWRECORDDETAIL_T.STATECODE, flowConsultation.FLOW_FLOWRECORDDETAIL_T.CHECKSTATE, "", "", "", "");
// FlowBLL flowBLL = new FlowBLL();
// StringBuilder FlowResultXml = flowBLL.BuildMessageData(tmpMessageData);
// //FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
// //log = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
// if (!string.IsNullOrEmpty(flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
// {
// submitData.XML = flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
// }
// bool b = FlowEngine.FlowConsultati(cs, "", FlowResultXml.ToString(), submitData.XML);
// if (!b)
// {
// Tracer.Debug("FlowEngineService-FlowConsultati:" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID
// + "\nsubmitData:" + submitData.XML);
// }
// FlowBLL bll = new FlowBLL();
// bll.AddConsultation(flowConsultation);
// }
// catch (Exception ex)
// {
// Tracer.Debug("AddConsultation: -" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "-" + ex.InnerException + ex.Message);
// throw ex;
// }
//}
#endregion
}
/// <summary>
/// 获取元数据
/// </summary>
/// <param name="formid"></param>
/// <returns></returns>
public string GetMetadataByFormid(string formid)
{
SMT.FlowWFService.NewFlow.Service Flow = new SMT.FlowWFService.NewFlow.Service();
return Flow.GetMetadataByFormid(formid);
}
public List<FLOW_MODELFLOWRELATION_T> GetModelFlowRelationInfosListBySearch(int pageIndex, int pageSize, string sort, string filterString, object[] paras, ref int pageCount)
{
SMT.FlowWFService.NewFlow.Service Flow = new SMT.FlowWFService.NewFlow.Service();
return Flow.GetModelFlowRelationInfosListBySearch( pageIndex, pageSize, sort, filterString, paras, ref pageCount);
}
/// <summary>
/// 判断是否可能用自选流程或提单人可以撒回流程
/// string[0]=1 可以用自选流程
/// string[1]=1 提交人可以撒回流程
/// </summary>
/// <param name="modelcode">模块代码</param>
/// <param name="companyid">公司ID</param>
public string[] IsFreeFlowAndIsCancel(string modelcode, string companyid)
{
SMT.FlowWFService.NewFlow.Service Flow = new SMT.FlowWFService.NewFlow.Service();
return Flow.IsFreeFlowAndIsCancel(modelcode, companyid);
}
/// <summary>
/// 根据流程ID获取流程的所有分支
/// </summary>
/// <param name="FlowID"></param>
/// <returns></returns>
public List<string> GetFlowBranch(string FlowID)
{
SMT.FlowWFService.NewFlow.Service Flow = new SMT.FlowWFService.NewFlow.Service();
return Flow.GetFlowBranch(FlowID);
}
/// <summary>
/// 对外接口：根据我的单据ID获取记录实体
/// </summary>
/// <param name="personalrecordid">我的单据ID</param>
/// <returns></returns>
public T_WF_PERSONALRECORD GetPersonalRecordByID(string personalrecordid)
{
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetPersonalRecordByID(personalrecordid);
}
/// <summary>
/// 通过机构ID和模块代码查询对应流程代码
/// </summary>
/// <param name="entity"></param>
/// <returns></returns>
//public List<FLOW_MODELFLOWRELATION_T> GetFlowByModel(FLOW_MODELFLOWRELATION_T entity)
//{
// return FlowBLL.GetFlowByModel(entity);
//}
public string GetFlowDefine(SubmitData ApprovalData)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetFlowDefine(con, ApprovalData);
#region 旧代码
//FlowBLL Flow = new FlowBLL();
//return Flow.GetFlowDefine(ApprovalData);
#endregion
}
/// <summary>
/// 根据模块代码和用户id查询待审核单据
/// </summary>
/// <param name="ModelCode">模块代码</param>
/// <param name="EditUserID">用户id</param>
/// <returns>Formids</returns>
public List<string> GetWaitingApprovalForm(string ModelCode, string EditUserID)
{
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetWaitingApprovalForm(ModelCode, EditUserID);
}
/// <summary>
/// 查询任务信息
/// </summary>
/// <param name="FormID"></param>
/// <param name="FlowGUID"></param>
/// <param name="CheckState"></param>
/// <param name="Flag"></param>
/// <param name="ModelCode"></param>
/// <param name="CompanyID"></param>
/// <param name="EditUserID"></param>
/// <returns></returns>
public List<TaskInfo> GetTaskInfo(string FormID, string FlowGUID, string CheckState, string Flag, string ModelCode, string CompanyID, string EditUserID)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetTaskInfo(con, FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID);
#region 旧代码
//return FlowBLL.GetTaskInfo(FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID);
#endregion
}
public List<FLOW_FLOWRECORDMASTER_T> GetFlowRecordMaster(string FormID, string FlowGUID, string CheckState, string Flag, string ModelCode, string CompanyID, string EditUserID)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetFlowRecordMaster(con, FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID);
#region 旧代码
//try
//{
// return FlowBLL.GetFlowRecordMaster(FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID);
//}
//catch (Exception ex)
//{
// Tracer.Debug("GetFlowRecordMaster: -" + ex.InnerException + ex.Message);
// throw ex;
//}
#endregion
}
/// <summary>
/// 查询审批流程
/// </summary>
/// <param name="entity"></param>
/// <returns></returns>
public List<FLOW_FLOWRECORDDETAIL_T> GetFlowInfo(string FormID, string FlowGUID, string CheckState, string Flag, string ModelCode, string CompanyID, string EditUserID)
{
using(OracleConnection con = ADOHelper.GetOracleConnection())
{
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetFlowInfo(con, FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID);
}
#region 旧代码
//List<FLOW_FLOWRECORDDETAIL_T> list = new List<FLOW_FLOWRECORDDETAIL_T>();
//try
//{
// List<FlowType> FlowTypeList = new List<FlowWFService.FlowType>();
// FlowTypeList.Add(FlowType.Approval);
// FlowTypeList.Add(FlowType.Pending);
// //Debug.WriteLine("GetFlowInfo\n");
// //Debug.WriteLine(DateTime.Now.ToString());
// //Debug.WriteLine("\n");
// //有formid和modelcode不对返回数据量作限制，否则只返回前20条master数据
// if (!string.IsNullOrEmpty(FormID) && !string.IsNullOrEmpty(ModelCode))
// {
// list = FlowBLL.GetFlowInfoV(FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID, FlowTypeList);
// }
// else
// {
// Tracer.Debug("GetFlowInfoTop: formID:" + FormID + "--FlowGuid:" + FlowGUID
// + "--CheckState:" + CheckState + "--Flag:" + Flag + "--ModelCode:" + ModelCode + "--CompanyID:" + CompanyID + "--EditUserID:" + EditUserID);
// list = FlowBLL.GetFlowInfoTop(FormID, FlowGUID, CheckState, Flag, ModelCode, CompanyID, EditUserID, FlowTypeList);
// }
//}
//catch (Exception ex)
//{
// Tracer.Debug("GetFlowInfo: -" + FormID + "-" + ex.InnerException + "\n" + ex.Message);
// throw ex;
//}
//return list;
#endregion
}
public string UpdateFlow(FLOW_FLOWRECORDDETAIL_T entity)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.UpdateFlow(con, entity);
#region 旧代码
//FlowBLL bll = new FlowBLL();
//bll.UpdateFlowRecord(entity, "", "");
//return "";
#endregion
}
/// <summary>
/// 启动与工作流程相同类型流程，查询对应节点用户
/// </summary>
/// <param name="CompanyID">公司ID</param>
/// <param name="ModelCode">模块代码</param>
/// <param name="FlowGUID">待审批流GUID，新增时为空或者为StartFlow</param>
/// <returns></returns>
public DataResult GetAppUser(string CompanyID, string ModelCode, string FlowGUID, string xml)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.GetAppUser(con, CompanyID, ModelCode, FlowGUID, xml);
#region 旧代码
//DataResult GetAppUserResult = new DataResult();
//try
//{
// string StateName = null;
// if (FlowGUID == "" || FlowGUID == "StartFlow")
// {
// StateName = "StartFlow";
// }
// else
// {
// //根据待审批流程GUID,检索待审批状态节点代码
// List<FLOW_FLOWRECORDDETAIL_T> FlowRecord = FlowBLL.GetFlowInfo("", FlowGUID, "", "", "", "", "", null);
// if (FlowRecord == null)
// {
// GetAppUserResult.Err = "没有待处理的审核";
// GetAppUserResult.UserInfo = null;
// return GetAppUserResult;
// }
// StateName = FlowRecord[0].STATECODE;
// }
// //根据公司ID，模块代码获取配置的流程
// WorkflowInstance instance = null;
// List<FLOW_MODELFLOWRELATION_T> MODELFLOWRELATION = FlowBLL.GetFlowByModelName(CompanyID, "", ModelCode, "0");
// if (MODELFLOWRELATION == null || MODELFLOWRELATION.Count == 0)
// {
// GetAppUserResult.Err = "没有可使用的流程";
// GetAppUserResult.UserInfo = null;
// return GetAppUserResult;
// }
// FLOW_FLOWDEFINE_T Xoml = MODELFLOWRELATION[0].FLOW_FLOWDEFINE_T;
// XmlReader readerxoml, readerule;
// StringReader strXoml = new StringReader(Xoml.XOML);
// StringReader strRules = new StringReader(Xoml.RULES == null ? "" : Xoml.RULES);
// readerxoml = XmlReader.Create(strXoml);
// readerule = XmlReader.Create(strRules);
// WorkflowRuntime workflowRuntime = new WorkflowRuntime();
// workflowRuntime.StartRuntime();
// FlowEvent ExternalEvent = new FlowEvent();
// ExternalDataExchangeService objService = new ExternalDataExchangeService();
// workflowRuntime.AddService(objService);
// objService.AddService(ExternalEvent);
// TypeProvider typeProvider = new TypeProvider(null);
// workflowRuntime.AddService(typeProvider);
// //XmlReader readerxoml = XmlReader.Create(HttpContext.Current.Server.MapPath ("TestFlow.xml"));
// // instance = workflowRuntime.CreateWorkflow(readerxoml);
// if (Xoml.RULES == null)
// instance = workflowRuntime.CreateWorkflow(readerxoml);
// else
// instance = workflowRuntime.CreateWorkflow(readerxoml, readerule, null);
// // instance = workflowRuntime.CreateWorkflow(typeof(TestFlow));
// instance.Start();
// StateMachineWorkflowInstance workflowinstance = new StateMachineWorkflowInstance(workflowRuntime, instance.InstanceId);
// //从实例中获取定义
// if (1 == 2)
// {
// System.Workflow.Activities.StateMachineWorkflowActivity smworkflow = new StateMachineWorkflowActivity();
// smworkflow = workflowinstance.StateMachineWorkflow;
// RuleDefinitions ruleDefinitions = smworkflow.GetValue(RuleDefinitions.RuleDefinitionsProperty) as RuleDefinitions;
// WorkflowMarkupSerializer markupSerializer = new WorkflowMarkupSerializer();
// StringBuilder xoml = new StringBuilder();
// StringBuilder rule = new StringBuilder();
// XmlWriter xmlWriter = XmlWriter.Create(xoml);
// XmlWriter ruleWriter = XmlWriter.Create(rule);
// markupSerializer.Serialize(xmlWriter, smworkflow);
// markupSerializer.Serialize(ruleWriter, ruleDefinitions);
// xmlWriter.Close();
// ruleWriter.Close();
// StringReader readxoml = new StringReader(xoml.ToString());
// StringReader readrule = new StringReader(rule.ToString());
// XmlReader readerxoml2 = XmlReader.Create(readxoml);
// XmlReader readerrule2 = XmlReader.Create(readrule);
// WorkflowInstance instance1 = workflowRuntime.CreateWorkflow(readerxoml2, readerrule2, null);
// instance1.Start();
// StateMachineWorkflowInstance workflowinstance1 = new StateMachineWorkflowInstance(workflowRuntime, instance1.InstanceId);
// workflowinstance1.SetState(StateName);
// }
// //从实例中获取定义并启动新实例
// //跳转到节点StateName
// workflowinstance.SetState(StateName);
// FlowDataType.FlowData FlowData = new FlowDataType.FlowData();
// FlowData.xml = xml;
// // FlowData.Flow_FlowRecord_T = null;
// ExternalEvent.OnDoFlow(instance.InstanceId, FlowData);//激发流程引擎流转到下一状态
// System.Threading.Thread.Sleep(1000);
// PermissionServiceClient WcfPermissionService = new PermissionServiceClient();
// string CurrentStateName = workflowinstance.CurrentStateName == null ? "End" : workflowinstance.CurrentStateName; //取得当前状态
// List<UserInfo> listUser = new List<UserInfo>();
// if (CurrentStateName != "End")
// {
// if (CurrentStateName.Substring(0, 5) == "State")
// {
// CurrentStateName = CurrentStateName.Substring(5);
// }
// string WFCurrentStateName = new Guid(CurrentStateName).ToString("D");
// T_SYS_USER[] User = WcfPermissionService.GetSysUserByRole(WFCurrentStateName); //检索本状态（角色）对应用户
// if (User != null)
// for (int i = 0; i < User.Length; i++)
// {
// UserInfo tmp = new UserInfo();
// tmp.UserID = User[i].EMPLOYEEID;
// tmp.UserName = User[i].EMPLOYEENAME;
// listUser.Add(tmp);
// }
// }
// else
// {
// //已经到流程结束状态
// UserInfo tmp = new UserInfo();
// tmp.UserID = "End";
// tmp.UserName = "******";
// listUser.Add(tmp);
// }
// GetAppUserResult.UserInfo = listUser.Count > 0 ? listUser : null;
// if (GetAppUserResult.UserInfo == null)
// GetAppUserResult.Err = "没有找到用户";
// return GetAppUserResult;
// // return listUser;
// //return workflowinstance.CurrentStateName == null ? "End" : workflowinstance.CurrentStateName;
//}
//catch (Exception ex)
//{
// GetAppUserResult.Err = ex.Message;
// GetAppUserResult.UserInfo = null;
// return GetAppUserResult;
//}
#endregion
}
public DataResult SubimtFlow(SubmitData submitData)
{
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
return s2.SubimtFlow(submitData);
#region 旧代码
//DateTime dtStart = DateTime.Now;
//DateTime dtEngineStart = DateTime.Now;
//DateTime dtEnd = DateTime.Now;
//DateTime dtCheckData = DateTime.Now;
////using (TransactionScope ts = new TransactionScope())
////设置2分钟超时时间
//using (TransactionScope ts = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(DateTime.Now.AddMinutes(2).Ticks)))
//{
// //System.Threading.Thread.Sleep(60000);
// DataResult dataResult = new DataResult();
// FlowBLL Flowbill = new FlowBLL();
// string AppCompanyID = ""; //申请公司
// string MessageUserID = ""; //申请人ID
// string MessageUserName = ""; //申请人名
// dataResult.FlowResult = FlowResult.SUCCESS;
// try
// {
// #region 检查流程数据是否规范
// if (!FlowBLL.CheckFlowData(submitData, ref dataResult))
// {
// dataResult.FlowResult = FlowResult.FAIL;
// {
// ts.Complete();
// return dataResult;
// }
// }
// #endregion
// submitData.ApprovalResult = submitData.SubmitFlag == SubmitFlag.New ? ApprovalResult.Pass : submitData.ApprovalResult;
// submitData.FlowSelectType = submitData.FlowSelectType == null ? FlowSelectType.FixedFlow : submitData.FlowSelectType;
// #region
// #region 检查是否已提交流程
// CheckResult CheckFlowResult = Flowbill.CheckFlow2(submitData, dataResult);
// dtCheckData = DateTime.Now;
// dataResult = CheckFlowResult.APPDataResult;
// if (CheckFlowResult.Flag == 0)
// {
// ts.Complete();
// return dataResult;
// }
// #endregion
// dataResult.AppState = submitData.NextStateCode;
// //提交新流程
// if (submitData.SubmitFlag == SubmitFlag.New)
// {
// #region 新增
// AppCompanyID = submitData.ApprovalUser.CompanyID;
// if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
// //自选流程
// dataResult = Flowbill.AddFreeFlow(submitData, dataResult);
// else
// {
// //固定流程
// dataResult = Flowbill.AddFlow2(submitData, dataResult);
// }
// #endregion
// }
// else if (submitData.SubmitFlag == SubmitFlag.Cancel)
// {
// #region 撤单
// if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
// {
// submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
// }
// submitData.ApprovalContent = "";
// dataResult = Flowbill.CancelFlow(submitData, dataResult, CheckFlowResult.fd);
// dataResult.SubmitFlag = submitData.SubmitFlag;
// #endregion
// }
// //审批流程
// else
// {
// #region 审核
// if (!string.IsNullOrEmpty(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT))
// {
// submitData.XML = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.BUSINESSOBJECT;
// }
// //引擎消息数据
// AppCompanyID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATECOMPANYID;
// MessageUserID = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERID;
// MessageUserName = CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.CREATEUSERNAME;
// submitData.ApprovalUser.CompanyID = CheckFlowResult.fd[0].EDITCOMPANYID;
// submitData.ApprovalUser.DepartmentID = CheckFlowResult.fd[0].EDITDEPARTMENTID;
// submitData.ApprovalUser.PostID = CheckFlowResult.fd[0].EDITPOSTID;
// submitData.FlowSelectType = (FlowSelectType)Convert.ToInt32(CheckFlowResult.fd[0].FLOW_FLOWRECORDMASTER_T.FLOWSELECTTYPE);
// if (submitData.FlowSelectType == FlowSelectType.FreeFlow)
// dataResult = Flowbill.ApprovalFreeFlow(submitData, dataResult, CheckFlowResult.fd);
// else
// dataResult = Flowbill.ApprovalFlow2(submitData, dataResult, CheckFlowResult.fd);
// #endregion
// }
// #endregion
// ModelInfo modelinfo = FlowBLL.GetSysCodeByModelCode(submitData.ModelCode);
// ts.Complete(); //提交事务
// bool bOK = true;
// if (string.IsNullOrEmpty(strIsFlowEngine) || strIsFlowEngine.ToLower() == "true")
// {
// dtEngineStart = DateTime.Now;
// #region 发送审批消息
// try
// {
// if (dataResult.FlowResult == FlowResult.SUCCESS || dataResult.FlowResult == FlowResult.END)
// {
// FlowEngineService.EngineWcfGlobalFunctionClient FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
// string IsTask = dataResult.FlowResult == FlowResult.SUCCESS ? "1" : "0";
// MessageData tmpMessageData = null;
// StringBuilder FlowResultXml = null;
// #region
// switch (submitData.SubmitFlag)
// {
// case SubmitFlag.New:
// #region 新增
// if (dataResult.IsCountersign)
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// List<string> listUserID = new List<string>();
// List<string> listUserName = new List<string>();
// if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
// {
// dataResult.DictCounterUser.Values.ToList().ForEach(users =>
// {
// users.ForEach(user =>
// {
// listUserID.Add(user.UserID);
// listUserName.Add(user.UserName);
// });
// });
// MessageUserID = string.Join("|", listUserID);
// MessageUserName = string.Join("|", listUserName);
// }
// }
// if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
// {
// dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
// {
// MessageUserID += "|" + user.UserID.Trim();
// MessageUserName += "|" + user.UserName.Trim();
// });
// }
// #endregion
// }
// else
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// MessageUserID = dataResult.UserInfo[0].UserID.Trim();
// MessageUserName = dataResult.UserInfo[0].UserName.Trim();
// }
// if (dataResult.AgentUserInfo != null)
// {
// MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
// MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
// }
// #endregion
// }
// tmpMessageData = new MessageData("Flow", modelinfo.SysCode, AppCompanyID, submitData.ModelCode, modelinfo.ModelName,
// submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
// FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
// bOK = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
// if (!bOK)
// {
// Tracer.Debug("FlowEngineService:FormID-" + submitData.FormID + "--submitDataXML:" + submitData.XML);
// }
// #endregion
// break;
// case SubmitFlag.Cancel:
// #region 撤单
// tmpMessageData = new MessageData("Flow", modelinfo.SysCode, AppCompanyID, submitData.ModelCode, modelinfo.ModelName,
// submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
// FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
// bool bCancel = FlowEngine.FlowCancel(FlowResultXml.ToString(), submitData.XML);
// if (!bCancel)
// {
// Tracer.Debug("FlowEngineService:DateTime:" + DateTime.Now.ToString() + "\n" + "FlowCancel:submitData.XML" + "\n\nFlowResultXml" + FlowResultXml.ToString());
// }
// #endregion
// break;
// case SubmitFlag.Approval:
// #region 审核
// FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, submitData.ApprovalUser.UserID);
// if (dataResult.CurrentIsCountersign)
// {
// #region
// if (submitData.ApprovalResult == ApprovalResult.NoPass)
// {
// #region
// List<string> listMessageUserID = new List<string>();
// CheckFlowResult.fd.Where(detail => detail.EDITUSERID != submitData.ApprovalUser.UserID).ToList().ForEach(item =>
// {
// listMessageUserID.Add(item.EDITUSERID);
// if (!string.IsNullOrEmpty(item.AGENTUSERID))
// {
// listMessageUserID.Add(item.AGENTUSERID);
// }
// });
// if (listMessageUserID.Count > 0)
// {
// string messageUserID = string.Join(",", listMessageUserID);
// FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, messageUserID);
// }
// tmpMessageData = new MessageData("Flow", modelinfo.SysCode, AppCompanyID, submitData.ModelCode, modelinfo.ModelName,
// submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
// FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
// bOK = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
// if (!bOK)
// {
// Tracer.Debug("FlowEngineService:FormID-" + submitData.FormID + "--submitDataXML:" + submitData.XML);
// }
// #endregion
// }
// else if (dataResult.IsGotoNextState)
// {
// #region
// List<string> listMessageUserID = new List<string>();
// CheckFlowResult.fd.Where(detail => detail.EDITUSERID != submitData.ApprovalUser.UserID).ToList().ForEach(item =>
// {
// listMessageUserID.Add(item.EDITUSERID);
// if (!string.IsNullOrEmpty(item.AGENTUSERID))
// {
// listMessageUserID.Add(item.AGENTUSERID);
// }
// });
// if (listMessageUserID.Count > 0)
// {
// string messageUserID = string.Join(",", listMessageUserID);
// FlowEngine.TaskMsgClose(modelinfo.SysCode, submitData.FormID, messageUserID);
// }
// if (dataResult.IsCountersign)
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// List<string> listUserID = new List<string>();
// List<string> listUserName = new List<string>();
// if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
// {
// dataResult.DictCounterUser.Values.ToList().ForEach(users =>
// {
// users.ForEach(user =>
// {
// listUserID.Add(user.UserID);
// listUserName.Add(user.UserName);
// });
// });
// MessageUserID = string.Join("|", listUserID);
// MessageUserName = string.Join("|", listUserName);
// }
// }
// if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
// {
// dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
// {
// MessageUserID += "|" + user.UserID.Trim();
// MessageUserName += "|" + user.UserName.Trim();
// });
// }
// #endregion
// }
// else
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// MessageUserID = dataResult.UserInfo[0].UserID.Trim();
// MessageUserName = dataResult.UserInfo[0].UserName.Trim();
// }
// if (dataResult.AgentUserInfo != null)
// {
// MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
// MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
// }
// #endregion
// }
// tmpMessageData = new MessageData("Flow", modelinfo.SysCode, AppCompanyID, submitData.ModelCode, modelinfo.ModelName,
// submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
// FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
// bOK = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
// if (!bOK)
// {
// Tracer.Debug("FlowEngineService:FormID-" + submitData.FormID + "--submitDataXML:" + submitData.XML);
// }
// #endregion
// }
// #endregion
// }
// else
// {
// #region
// if (dataResult.IsCountersign)
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// List<string> listUserID = new List<string>();
// List<string> listUserName = new List<string>();
// if (dataResult.DictCounterUser != null && dataResult.DictCounterUser.Keys.Count > 0)
// {
// dataResult.DictCounterUser.Values.ToList().ForEach(users =>
// {
// users.ForEach(user =>
// {
// listUserID.Add(user.UserID);
// listUserName.Add(user.UserName);
// });
// });
// MessageUserID = string.Join("|", listUserID);
// MessageUserName = string.Join("|", listUserName);
// }
// }
// if (dataResult.DictAgentUserInfo != null && dataResult.DictAgentUserInfo.Count > 0)
// {
// dataResult.DictAgentUserInfo.Values.ToList().ForEach(user =>
// {
// MessageUserID += "|" + user.UserID.Trim();
// MessageUserName += "|" + user.UserName.Trim();
// });
// }
// #endregion
// }
// else
// {
// #region
// if (dataResult.FlowResult == FlowResult.SUCCESS)
// {
// MessageUserID = dataResult.UserInfo[0].UserID.Trim();
// MessageUserName = dataResult.UserInfo[0].UserName.Trim();
// }
// if (dataResult.AgentUserInfo != null)
// {
// MessageUserID += "|" + dataResult.AgentUserInfo.UserID.Trim();
// MessageUserName += "|" + dataResult.AgentUserInfo.UserName.Trim();
// }
// #endregion
// }
// tmpMessageData = new MessageData("Flow", modelinfo.SysCode, AppCompanyID, submitData.ModelCode, modelinfo.ModelName,
// submitData.FormID, dataResult.AppState, dataResult.CheckState, IsTask, MessageUserID, MessageUserName, dataResult.KPITime);
// FlowResultXml = Flowbill.BuildMessageData(tmpMessageData);
// bOK = FlowEngine.SaveFlowTriggerData(FlowResultXml.ToString(), submitData.XML);
// if (!bOK)
// {
// Tracer.Debug("FlowEngineService:FormID-" + submitData.FormID + "--submitDataXML:" + submitData.XML);
// }
// #endregion
// }
// #endregion
// break;
// }
// #endregion
// }
// }
// catch (Exception ex)
// {
// Tracer.Debug("FlowEngineService: -" + "\n\nError:" + ex.InnerException + ex.Message);
// }
// #endregion
// }
// dtEnd = DateTime.Now;
// dataResult.SubmitFlag = submitData.SubmitFlag;
// return dataResult;
// }
// catch (Exception ex)
// {
// ts.Dispose();
// dataResult.RunTime += "---FlowEnd:" + DateTime.Now.ToString();
// dataResult.FlowResult = FlowResult.FAIL;
// Flowbill = null;
// dataResult.Err = ex.Message;
// Tracer.Debug("FlowService: -" + submitData.FormID + "--submitDataXML:" + submitData.XML + "-" + ex.InnerException + ex.Message);
// return dataResult;
// }
// finally
// {
// dataResult = null;
// Tracer.Debug("-------Trace--FormID:" + submitData.FormID + "DateTime: Start:" + dtStart.ToString() + " EngineStart:" + dtEngineStart.ToString() + " End:" + dtEnd.ToString() + "\n");
// }
//}
#endregion
}
public void ReplyConsultation(FLOW_CONSULTATION_T flowConsultation, SubmitData submitData)
{
OracleConnection con = ADOHelper.GetOracleConnection();
SMT.FlowWFService.NewFlow.Service s2 = new SMT.FlowWFService.NewFlow.Service();
s2.ReplyConsultation(con, flowConsultation, submitData);
#region 旧代码
//if (strIsFlowEngine.ToLower() == "true")
//{
// try
// {
// FlowEngineService.EngineWcfGlobalFunctionClient FlowEngine = new FlowEngineService.EngineWcfGlobalFunctionClient();
// //Byte[] Bo = System.Text.UTF8Encoding.UTF8.GetBytes(submitData.XML);
// //XElement xemeBoObject = XElement.Load(System.Xml.XmlReader.Create(new MemoryStream(Bo)));
// //string strSystemCode = (from item in xemeBoObject.Descendants("Name") select item).FirstOrDefault().Value;
// ModelInfo modelinfo = FlowBLL.GetSysCodeByModelCode(submitData.ModelCode);
// FlowEngine.FlowConsultatiClose(modelinfo.SysCode, flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID, flowConsultation.REPLYUSERID);
// FlowBLL bll = new FlowBLL();
// bll.ReplyConsultation(flowConsultation);
// }
// catch (Exception ex)
// {
// Tracer.Debug("ReplyConsultation: -" + flowConsultation.FLOW_FLOWRECORDDETAIL_T.FLOW_FLOWRECORDMASTER_T.FORMID + "-" + ex.InnerException + ex.Message);
// throw ex;
// }
//}
#endregion
}
/// <summary>
/// 更新元数据
/// </summary>
/// <param name="formid"></param>
/// <param name="xml"></param>
/// <returns></returns>
public bool UpdateMetadataByFormid(string formid, string xml)
{
SMT.FlowWFService.NewFlow.Service Flow = new SMT.FlowWFService.NewFlow.Service();
return Flow.UpdateMetadataByFormid(formid, xml);
}
