public static void CableTest()
{
//TEST PARAMETER DEFINITIONS
int[] amplitudes = new int[1] {
-20
}; //Hard coded values for amplitude settings
SwpParamStruct param = new SwpParamStruct(2000, 4000, amplitudes[0], 12); //Hard coded values, Initialize param structure
string[] seriesName = new string[amplitudes.Length];
double[] data = new double[param.numSteps];
double[] freqAxis = new double[param.numSteps];
double[,] freqAmplitudeData = new double[param.numSteps, amplitudes.Length + 1]; //Always a 2D array
//MEASUREMENT EQUIPMENT SETUP
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
///ESG Setup
SG_AgilentESG esg = new SG_AgilentESG(ESGAddress);
Console.WriteLine(esg.Identify());
//PXA Setup
Console.WriteLine("--PXA TEST STARTED--");
SA_AgilentPXA pxa = new SA_AgilentPXA(PXAAddress);
Console.WriteLine("--CABLE TEST STARTED--");
for (int j = 0; j < amplitudes.Length; j++)
{
param.amplitude = amplitudes[j];
string seriesLabel = "Input Amplitude " + amplitudes[j] + "dBm";
seriesName[j] = seriesLabel;
//set init values on ESG
esg.SetFrequency(param.freqMin);
esg.SetAmplitude(param.amplitude);
esg.SetRfOutput(true);
for (int i = 0; i < param.numSteps; i++)
{
double test_freq = param.freqMin + i * (param.freqMax - param.freqMin) / param.numSteps;
esg.SetFrequency(test_freq);
pxa.SetCenterSpan(test_freq, 100, 0); //MHz
pxa.SetAtten(10);
pxa.SetRefLevel(-10);
pxa.SetMarker(1, test_freq); //Sets marker to frequency of interest
pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
data[i] = Double.Parse(pxa.GetMarker(1), style); //Rewrite this... it's verbose
freqAxis[i] = test_freq;
freqAmplitudeData[i, 0] = test_freq;
freqAmplitudeData[i, j + 1] = Double.Parse(pxa.GetMarker(1), style);
}
}
// PRINT OUTPUT FILES
string path = @"..\..\..\TestResults\CableTest"; //Sends output data to the TestOutputs folder
//Output Data to a text file
//Output Charts to a pdf file
var doc1 = new Document();
string[] chartLabels = new string[] { "Received ESG Amplitude on PXA (Cable Test)",
"ESG Frequency (MHz)",
"Amplitude (dBm)",
"ESG Amplitude (dBm): " + amplitudes[0] };
string[] headerStrings = new string[] { "Cable Test Output Graph",
"Mykonos API Regression Testing Development",
Helper.GetTimestamp() };
iTextSharp.text.Image[] container = new iTextSharp.text.Image[1];
container[0] = Helper.MakeChartObject(freqAmplitudeData, chartLabels, path + ".pdf");
Helper.AddAllChartsToPdf(container, path + ".pdf", headerStrings);
//Open Result pdf
System.Diagnostics.Process.Start(path + ".pdf");
}
public static void TxAttenuationSweep([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel)
{
int atten = 0;
int backoff = 0;
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Configure Tone Generator
//10MHz offset tone generation
double offsetFreq_Hz = 10000000;
double[,] fundAmpXY = new double[42, 2];
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Connect to Signal Analyser
//The span is fixed to 50MHz
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 50, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(1, freqTxLo_MHz + 10); //Fundemental Amplitued Marker
pxa.SetMarker(2, freqTxLo_MHz); //LO Leakage Marker
pxa.SetMarker(3, freqTxLo_MHz - (offsetFreq_Hz / 1000000)); //Image Amplitude marker
//Config and Enable Mykonos with Test Specific Settings
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.radioOn();
//Test Sequence
//Iterate Thru Tx Attenuation Settings
//Measure Amplitude of the fundamental
//TODO: 0 to 41950
int step = 0;
double fundAmp_dB = 0;
double minAttnVal_dB = 0;
double maxAttnVal_dB = 41.95;
for (double attenVal_dB = minAttnVal_dB; (attenVal_dB < maxAttnVal_dB); attenVal_dB += 1)
{
try
{
if (channel == Mykonos.TXCHANNEL.TX1)
{
Link.Mykonos.setTx1Attenuation(attenVal_dB);
}
if (channel == Mykonos.TXCHANNEL.TX2)
{
Link.Mykonos.setTx2Attenuation(attenVal_dB);
}
}
catch (Exception e)
{
Console.WriteLine(e);
break;
}
pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
fundAmp_dB = Double.Parse(pxa.GetMarker(1), style);
fundAmpXY[step, 1] = fundAmp_dB;
fundAmpXY[step, 0] = attenVal_dB;
step++;
#if WR_RES_TO_CONSOLE
Console.WriteLine("Fundamental Amplitude, Attenuation Value " + attenVal_dB + ": " + fundAmp_dB);
#endif
}
Link.Disconnect();
#if WR_RES_TO_PDF
//Graph Data and Save in PDF Form
var doc1 = new Document();
string path = TxRfTests.ResPath + "TxAttenuationSweep";
string[] pcbInfo;
iTextSharp.text.Image[] container = new iTextSharp.text.Image[1];
string[] fundAmpLabels = new string[] { "Fundamental Amplitude Versus Offset Tone Frequency (from LO)",
"setTxAtten Argument",
"Amplitude (dBm)",
"Trace Amplitude" };
pcbInfo = Helper.PcbInfo((settings.txPllLoFreq_Hz / 1000000.0).ToString(), (settings.rxPllLoFreq_Hz / 1000000.0).ToString(), settings.mykSettings.txProfileName, settings.mykSettings.rxProfileName, backoff.ToString(), atten.ToString());
container[0] = Helper.MakeChartObject(fundAmpXY, fundAmpLabels, path);
TxRfTests instance = new TxRfTests();
Helper.AddAllChartsToPdf(container, path + ".pdf", pcbInfo);
//Open Result PDF
System.Diagnostics.Process.Start(path + ".pdf");
#endif
}