public IRigidBody CreateDynamicCircle(Vector2 position, float radius)
{
var rb = new NetRigitBody();
RigidBodies.Add(rb);
return(rb);
}
public IRigidBody CreateStaticTriangle(Vector2 position)
{
var rb = new NetRigitBody();
RigidBodies.Add(rb);
return(rb);
}
public IRigidBody CreateDynamicBox(Vector2 position, Vector2 size)
{
var rb = new NetRigitBody();
RigidBodies.Add(rb);
return(rb);
}
public IRigidBody CreateStaticBox(Vector2 position, Vector2 size)
{
var rb = new NetRigitBody()
{
IsStatic = true
};
RigidBodies.Add(rb);
return(rb);
}
/// <summary>
/// Adds a rigidbody to the world if it doesn't already exist.
/// </summary>
/// <param name="_body"></param>
public void AddRigidBody(ABRigidBody _body)
{
if (RigidBodies.Contains(_body))
{
Debug.LogWarning("Can't add duplicate rigid body!");
return;
}
RigidBodies.Add(_body);
}
/// <summary>
/// Removes a rigidbody from the world if it exists.
/// </summary>
/// <param name="_body"></param>
public void RemoveBody(ABRigidBody _body)
{
if (RigidBodies.Contains(_body))
{
RigidBodies.Remove(_body);
return;
}
Debug.LogWarning("Attempted to remove a body from world that didn't exist.");
}
/// <summary>
/// Removes the bodies that have left the simulation boundaries.
/// </summary>
private void RemoveBodiesOutsideWorld()
{
if (Settings.Motion.RemoveBodiesOutsideWorld)
{
int numberOfRigidBodies = RigidBodies.Count;
for (int i = numberOfRigidBodies - 1; i >= 0; i--)
{
var body = RigidBodies[i];
if (body.IsSleeping)
continue;
var pose = body.Pose;
if (pose.Position.IsNaN
|| pose.Orientation.IsNaN
|| !GeometryHelper.HaveContact(body.Aabb, World.Aabb))
{
RigidBodies.Remove(body);
}
}
}
}
public override void BuildGeometry(GraphicsDevice device)
{
float dh = Room.Door.DoorHeight; // door height
float dw2 = Room.Door.DoorWidth * .5f; // door width * .5
float ww = .2f; // wall width
float rw = .1f; // roof thickness
float roofSlope = .3f; // slope of line that makes roof
float rsx = 0; // offset of line that makes roof
float roofAng = (float)Math.Atan(roofSlope);
#region geometry generation
Color pillarColor = new Color(.47f, .36f, .21f);
Color wallColor = new Color(.57f, .45f, .26f);
Color roofColor = new Color(.47f, .36f, .21f);
for (int q = 0; q < Rooms.Length; q++)
{
Room r = Rooms[q];
Vector3 p = r.Position;
JVector jp = new JVector(p.X, p.Y, p.Z);
float w = r.Width * .5f, l = r.Length * .5f;
Vector3 c0 = p + new Vector3(-w, 0, -l),
c1 = p + new Vector3(w, 0, -l),
c2 = p + new Vector3(-w, 0, l),
c3 = p + new Vector3(w, 0, l);
rsx = -w;
// floor
addFace(wallColor, c0 + new Vector3(0, .1f, 0), c1 + new Vector3(0, .1f, 0), c3 + new Vector3(0, .1f, 0), c2 + new Vector3(0, .1f, 0));
RigidBody floorBody = new RigidBody(new BoxShape(r.Width, 2, r.Length));
floorBody.Position = new JVector(p.X, p.Y - .9f, p.Z);
RigidBodies.Add(floorBody);
// make walls without doors
byte doors = 0;
Vector3 low = new Vector3(0, -2, 0);
Vector3 high = new Vector3(0, r.Height, 0);
#region doors
for (int d = 0; d < r.doors.Length; d++)
{
Vector3 p1 = c0, p2 = c1;
Vector3 dp = Vector3.Zero, ds = Vector3.Zero;
Vector3 dsy = new Vector3(0, dh, 0);
Vector3 wo = Vector3.Zero;
JVector o;
RigidBody b1 = null, b2 = null, b3 = null;
float f, f2;
switch (r.doors[d].Wall)
{
case 0: // z-
doors |= 1;
p1 = c0;
p2 = c1;
dp = Vector3.Lerp(p1, p2, r.doors[d].Location);
ds = new Vector3(dw2, 0, 0);
wo = new Vector3(0, 0, ww);
o = new JVector(dp.X, dp.Y, dp.Z) + new JVector(0, r.Height * .5f, ww * .5f);
f = r.Width * r.doors[d].Location - dw2;
f2 = r.Width * (1 - r.doors[d].Location) - dw2;
b1 = new RigidBody(new BoxShape(f, r.Height, ww)); b1.Position = o + new JVector(-f / 2 - dw2, 0, 0);
b2 = new RigidBody(new BoxShape(dw2 * 2, r.Height - dh, ww)); b2.Position = o + new JVector(0, dh * .5f, 0);
b3 = new RigidBody(new BoxShape(f2, r.Height, ww)); b3.Position = o + new JVector(f2 / 2 + dw2, 0, 0);
entrancebbox = new BoundingBox(dp - ds + new Vector3(0, -1, -2), dp + ds + new Vector3(0, dh, 2));
break;
case 1: // z+
doors |= 2;
p1 = c2;
p2 = c3;
dp = Vector3.Lerp(p1, p2, r.doors[d].Location);
ds = new Vector3(dw2, 0, 0);
wo = new Vector3(0, 0, -ww);
o = new JVector(dp.X, dp.Y, dp.Z) + new JVector(0, r.Height * .5f, -ww * .5f);
f = r.Width * r.doors[d].Location - dw2;
f2 = r.Width * (1 - r.doors[d].Location) - dw2;
b1 = new RigidBody(new BoxShape(f, r.Height, ww)); b1.Position = o + new JVector(-f / 2 - dw2, 0, 0);
b2 = new RigidBody(new BoxShape(dw2 * 2, r.Height - dh, ww)); b2.Position = o + new JVector(0, dh * .5f, 0);
b3 = new RigidBody(new BoxShape(f2, r.Height, ww)); b3.Position = o + new JVector(f2 / 2 + dw2, 0, 0);
entrancebbox = new BoundingBox(dp - ds + new Vector3(0, -1, -2), dp + ds + new Vector3(0, dh, 2));
break;
case 2: // x-
doors |= 4;
p1 = c0;
p2 = c2;
dp = Vector3.Lerp(p1, p2, r.doors[d].Location);
ds = new Vector3(0, 0, dw2);
wo = new Vector3(ww, 0, 0);
o = new JVector(dp.X, dp.Y, dp.Z) + new JVector(ww * .5f, r.Height * .5f, 0);
f = r.Length * r.doors[d].Location - dw2;
f2 = r.Length * (1 - r.doors[d].Location) - dw2;
b1 = new RigidBody(new BoxShape(ww, r.Height, f)); b1.Position = o + new JVector(0, 0, -f / 2 - dw2);
b2 = new RigidBody(new BoxShape(ww, r.Height - dh, dw2 * 22)); b2.Position = o + new JVector(0, dh * .5f, 0);
b3 = new RigidBody(new BoxShape(ww, r.Height, f2)); b3.Position = o + new JVector(0, 0, f2 / 2 + dw2);
entrancebbox = new BoundingBox(dp - ds + new Vector3(-2, -1, 0), dp + ds + new Vector3(2, dh, 0));
break;
case 3: // x+
doors |= 8;
p1 = c1;
p2 = c3;
dp = Vector3.Lerp(p1, p2, r.doors[d].Location);
ds = new Vector3(0, 0, dw2);
wo = new Vector3(-ww, 0, 0);
o = new JVector(dp.X, dp.Y, dp.Z) + new JVector(-ww * .5f, r.Height * .5f, 0);
f = r.Length * r.doors[d].Location - dw2;
f2 = r.Length * (1 - r.doors[d].Location) - dw2;
b1 = new RigidBody(new BoxShape(ww, r.Height, f)); b1.Position = o + new JVector(0, 0, -f / 2 - dw2);
b2 = new RigidBody(new BoxShape(ww, r.Height - dh, dw2 * 22)); b2.Position = o + new JVector(0, dh * .5f, 0);
b3 = new RigidBody(new BoxShape(ww, r.Height, f2)); b3.Position = o + new JVector(0, 0, f2 / 2 + dw2);
entrancebbox = new BoundingBox(dp - ds + new Vector3(-2, -1, 0), dp + ds + new Vector3(2, dh, 0));
break;
}
entrancebbox.Min += Position + r.Position;
entrancebbox.Max += Position + r.Position;
RigidBodies.Add(b1);
RigidBodies.Add(b2);
RigidBodies.Add(b3);
#region wall polygons
// outside wall face
addFace(wallColor,
new int[] {
0, 1, 4,
0, 4, 5,
0, 5, 6,
0, 6, 7,
1, 2, 3,
1, 3, 4,
8, 3, 6,
9, 3, 8
},
p2 + high + new Vector3(0, (p2.X - rsx) * roofSlope, 0),
p1 + high + new Vector3(0, (p1.X - rsx) * roofSlope, 0),
p1 + low,
dp - ds + low,
dp - ds + dsy,
dp + ds + dsy,
dp + ds + low,
p2 + low,
dp + ds + new Vector3(0, .1f, 0),
dp - ds + new Vector3(0, .1f, 0)
);
// inside wall face
addFace(wallColor,
new int[] {
0, 4, 1,
0, 5, 4,
0, 6, 5,
0, 7, 6,
1, 3, 2,
1, 4, 3
},
p2 + high + wo + new Vector3(0, (p2.X - rsx) * roofSlope, 0),
p1 + high + wo + new Vector3(0, (p1.X - rsx) * roofSlope, 0),
p1 + low + wo,
dp - ds + low + wo,
dp - ds + dsy + wo,
dp + ds + dsy + wo,
dp + ds + low + wo,
p2 + low + wo
);
// door insides
addFace(wallColor,
dp + ds,
dp + ds + dsy,
dp + ds + wo + dsy,
dp + ds + wo);
addFace(wallColor,
dp - ds + wo,
dp - ds + wo + dsy,
dp - ds + dsy,
dp - ds);
addFace(wallColor,
dp - ds + dsy + wo,
dp + ds + dsy + wo,
dp + ds + dsy,
dp - ds + dsy);
#endregion
}
#endregion
#region walls
if ((doors & 1) == 0) // no door on z- side, make a wall
{
addFace(wallColor,
c0 + high + new Vector3(0, (c0.X - rsx) * roofSlope, 0),
c1 + high + new Vector3(0, (c1.X - rsx) * roofSlope, 0),
c1 + low,
c0 + low);
addFace(wallColor,
c1 + high + new Vector3(ww, 0, ww) + new Vector3(0, (c1.X + ww - rsx) * roofSlope, 0),
c0 + high + new Vector3(-ww, 0, ww) + new Vector3(0, (c0.X - ww - rsx) * roofSlope, 0),
c0 + new Vector3(-ww, 0, ww),
c1 + new Vector3(ww, 0, ww));
RigidBody wallBody = new RigidBody(new BoxShape(r.Width, r.Height, ww));
wallBody.Position = jp + new JVector(0, r.Height * .5f, -(r.Length - ww) * .5f);
RigidBodies.Add(wallBody);
}
if ((doors & 2) == 0) // no door on z+ side, make a wall
{
addFace(wallColor,
c2 + high + new Vector3(0, (c2.X - rsx) * roofSlope, 0),
c3 + high + new Vector3(0, (c3.X - rsx) * roofSlope, 0),
c3 + low,
c2 + low);
addFace(wallColor,
c3 + high + new Vector3(-ww, 0, -ww) + new Vector3(0, (c3.X - ww - rsx) * roofSlope, 0),
c2 + high + new Vector3(ww, 0, -ww) + new Vector3(0, (c2.X + ww - rsx) * roofSlope, 0),
c2 + new Vector3(ww, 0, -ww),
c3 + new Vector3(-ww, 0, -ww));
RigidBody wallBody = new RigidBody(new BoxShape(r.Width, r.Height, ww));
wallBody.Position = jp + new JVector(0, r.Height * .5f, (r.Length - ww) * .5f);
RigidBodies.Add(wallBody);
}
if ((doors & 4) == 0) // no door on x- side, make a wall
{
addFace(wallColor,
c0 + high + new Vector3(0, (c0.X - rsx) * roofSlope, 0),
c2 + high + new Vector3(0, (c2.X - rsx) * roofSlope, 0),
c2 + low,
c0 + low);
addFace(wallColor,
c2 + high + new Vector3(ww, 0, -ww) + new Vector3(0, (c2.X + ww - rsx) * roofSlope, 0),
c0 + high + new Vector3(ww, 0, ww) + new Vector3(0, (c0.X + ww - rsx) * roofSlope, 0),
c0 + new Vector3(ww, 0, ww),
c2 + new Vector3(ww, 0, -ww));
RigidBody wallBody = new RigidBody(new BoxShape(ww, r.Height, r.Length));
wallBody.Position = jp + new JVector(-(r.Width - ww) * .5f, r.Height * .5f, 0);
RigidBodies.Add(wallBody);
}
if ((doors & 8) == 0) // no door on x+ side, make a wall
{
addFace(wallColor,
c3 + high + new Vector3(0, (c3.X - rsx) * roofSlope, 0),
c1 + high + new Vector3(0, (c1.X - rsx) * roofSlope, 0),
c1 + low,
c3 + low);
addFace(wallColor,
c1 + high + new Vector3(-ww, 0, ww) + new Vector3(0, (c1.X - ww - rsx) * roofSlope, 0),
c3 + high + new Vector3(-ww, 0, -ww) + new Vector3(0, (c3.X - ww - rsx) * roofSlope, 0),
c3 + new Vector3(-ww, 0, -ww),
c1 + new Vector3(-ww, 0, ww));
RigidBody wallBody = new RigidBody(new BoxShape(ww, r.Height, r.Length));
wallBody.Position = jp + new JVector((r.Width - ww) * .5f, r.Height * .5f, 0);
RigidBodies.Add(wallBody);
}
#endregion
#region roof
{
Vector3 c0r = c0 + high + new Vector3(-.5f, (c0.X - .5f - rsx) * roofSlope + rw, -.5f),
c1r = c1 + high + new Vector3(.5f, (c1.X + .5f - rsx) * roofSlope + rw, -.5f),
c2r = c2 + high + new Vector3(-.5f, (c2.X - .5f - rsx) * roofSlope + rw, .5f),
c3r = c3 + high + new Vector3(.5f, (c3.X + .5f - rsx) * roofSlope + rw, .5f);
Vector3 c0rd = c0 + high + new Vector3(-.5f, (c0.X - .5f - rsx) * roofSlope, -.5f),
c1rd = c1 + high + new Vector3(.5f, (c1.X + .5f - rsx) * roofSlope, -.5f),
c2rd = c2 + high + new Vector3(-.5f, (c2.X - .5f - rsx) * roofSlope, .5f),
c3rd = c3 + high + new Vector3(.5f, (c3.X + .5f - rsx) * roofSlope, .5f);
// top face
addFace(roofColor,
c0r,
c1r,
c3r,
c2r);
// bottom (inside) face
addFace(roofColor,
c2rd,
c3rd,
c1rd,
c0rd);
// front edge face
addFace(roofColor,
c0rd,
c1rd,
c1r,
c0r);
// back edge face
addFace(roofColor,
c3rd,
c2rd,
c2r,
c3r);
// right edge face
addFace(roofColor,
c1rd,
c3rd,
c3r,
c1r);
// left edge face
addFace(roofColor,
c2rd,
c0rd,
c0r,
c2r);
}
float a = roofSlope * (r.Width + 1 - rsx);
RigidBody roofBody = new RigidBody(new BoxShape(
(float)Math.Sqrt((r.Width + 1) * (r.Width + 1) + a * a) // pythagorean theorem
, rw, r.Length + 1));
roofBody.Orientation = JMatrix.CreateRotationZ(roofAng);
roofBody.Position = new JVector(0, r.Height + (roofSlope * r.Width + rw) * .5f, 0);
RigidBodies.Add(roofBody);
#endregion
}
#endregion
base.BuildGeometry(device);
}
public override void BuildGeometry(GraphicsDevice device)
{
addBox(new Color(65, 38, 20), new BoundingBox(new Vector3(-Width * .5f + .05f, -1, -Length * .5f + .05f), new Vector3(Width * .5f - .05f, 0.01f, Length * .5f - .05f)));
addBox(new Color(.2f, .4f, .3f), new BoundingBox(new Vector3(-Width * .5f, -1, -Length * .5f), new Vector3(Width * .5f, 0, Length * .5f)));
for (float x = -Width * .5f + 1; x < Width * .5f - 1; x++)
{
for (float z = -Length * .5f + 1; z < Length * .5f - 1; z += 3)
{
Crop c = new CornCrop(rand.Next(), Position + Vector3.Transform(new Vector3(x, 0, z), Orientation), area);
c.TimeLeft = 0;
Crops.Add(c);
ThreadPool.QueueUserWorkItem(new WaitCallback((object d) => { c.UpdateGeometry(d as GraphicsDevice); }), device);
}
}
// corners
addFencePost(new Vector3(-Width * .5f + .2f, 0, -Length * .5f + .2f));
addFencePost(new Vector3(Width * .5f - .2f, 0, -Length * .5f + .2f));
addFencePost(new Vector3(-Width * .5f + .2f, 0, Length * .5f - .2f));
addFencePost(new Vector3(Width * .5f - .2f, 0, Length * .5f - .2f));
// midpoints
addFencePost(new Vector3(Width * .5f - .2f, 0, 0));
addFencePost(new Vector3(-Width * .5f + .2f, 0, 0));
addFencePost(new Vector3(0, 0, Length * .5f - .2f));
// entrance posts
addFencePost(new Vector3(-1, 0, -Length * .5f + .2f));
addFencePost(new Vector3(1, 0, -Length * .5f + .2f));
// fence bars
float y = .8f;
Action b = new Action(() => {
Vector3 c = new Vector3(-Width * .5f + .2f, y, 0),
o = new Vector3(.05f, .1f, Length * .5f - .2f);
addBox(new Color(.47f, .36f, .21f), new BoundingBox(c - o, c + o));
c = new Vector3(Width * .5f - .2f, y, 0);
addBox(new Color(.47f, .36f, .21f), new BoundingBox(c - o, c + o));
c = new Vector3(0, y, Length * .5f - .2f);
o = new Vector3(Width * .5f - .2f, .1f, .05f);
addBox(new Color(.47f, .36f, .21f), new BoundingBox(c - o, c + o));
c = new Vector3(-Width * .25f - .4f, y, -Length * .5f + .2f);
o = new Vector3(Width * .25f - .6f, .1f, .05f);
addBox(new Color(.47f, .36f, .21f), new BoundingBox(c - o, c + o));
c = new Vector3(Width * .25f + .4f, y, -Length * .5f + .2f);
addBox(new Color(.47f, .36f, .21f), new BoundingBox(c - o, c + o));
});
b();
y = .3f;
b();
RigidBody groundBody = new RigidBody(new BoxShape(Width, 1f, Length));
groundBody.Position = new JVector(0, -.5f, 0f);
groundBody.Tag = this;
RigidBodies.Add(groundBody);
RigidBody f1 = new RigidBody(new BoxShape(Width - .2f, 1f, .2f));
f1.Position = new JVector(0, .5f, Length * .5f - .2f);
RigidBodies.Add(f1);
RigidBody f2 = new RigidBody(new BoxShape(.2f, 1f, Length - .2f));
f2.Position = new JVector(Width * .5f - .2f, .5f, 0);
RigidBodies.Add(f2);
RigidBody f3 = new RigidBody(new BoxShape(.2f, 1f, Length - .2f));
f3.Position = new JVector(-Width * .5f + .2f, .5f, 0);
RigidBodies.Add(f3);
RigidBody f4 = new RigidBody(new BoxShape(Width * .5f - 1.2f, 1f, .2f));
f4.Position = new JVector(Width * .25f + .4f, .5f, -Length * .5f + .2f);
RigidBodies.Add(f4);
RigidBody f5 = new RigidBody(new BoxShape(Width * .5f - 1.2f, 1f, .2f));
f5.Position = new JVector(-Width * .25f - .4f, .5f, -Length * .5f + .2f);
RigidBodies.Add(f5);
base.BuildGeometry(device);
}