/// <summary>
/// Creates a new Workplane relative to an entity and adds it to the collection.
/// </summary>
/// <param name="entity">The entity on which to create the new Workplane.</param>
/// <param name="origin">The intended origin for the workplane.</param>
/// <returns>The created workplane.</returns>
public PSWorkplane CreateWorkplaneAlignedToEntity(PSEntity entity, Geometry.Point origin)
{
PSWorkplane newWorkplane = new PSWorkplane(_powerSHAPE, entity, origin);
Add(newWorkplane);
return(newWorkplane);
}
/// <summary>
/// A test for RemoveToSelection
/// </summary>
public virtual void RemoveFromSelectionTest(string multipleEntitiesFile, string singleEntitiesFile)
{
// Import multiple entities
_powerSHAPE.ActiveModel.Import(new FileSystem.File(multipleEntitiesFile));
// Import single entity
_powerSHAPE.ActiveModel.Import(new FileSystem.File(singleEntitiesFile));
// Get single entity
PSEntity testEntity = _powerSHAPE.ActiveModel.SelectedItems[0];
// Select everything
_powerSHAPE.ActiveModel.SelectAll(true);
// Remove entities from selection
((PSEntitiesCollection <T>)_powerSHAPECollection).RemoveFromSelection();
// Check the selection contains only the single entity
if (_powerSHAPE.ActiveModel.SelectedItems.Count == 0) // Everything was deselected
{
Assert.Fail("Deselected all entities in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count == 4) // Nothing was deselected
{
Assert.Fail("Deselected nothing in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count != 1) // More than just the single entity is selected
{
Assert.Fail("Failed to remove all " + _collectionType.ToLower() + "s from selection");
}
Assert.AreEqual(_powerSHAPE.ActiveModel.SelectedItems[0],
testEntity,
"Removed incorrect entities from the selection");
}
/// <summary>
/// Creates a new Workplane relative to an entity and adds it to the collection.
/// </summary>
/// <param name="entity">The entity on which to create the new Workplane.</param>
/// <param name="positionAtEntity">The position on the entity at which to create the workplane: Centre, Top, Bottom.</param>
/// <returns>The created workplane.</returns>
public PSWorkplane CreateWorkplaneAtEntity(PSEntity entity, NewWorkplaneInEntityPositions positionAtEntity)
{
PSWorkplane newWorkplane = new PSWorkplane(_powerSHAPE, entity, positionAtEntity);
Add(newWorkplane);
return(newWorkplane);
}
/// <summary>
/// A test for Equals
/// </summary>
public virtual void EqualsTest(string file)
{
// Create comparison
PSEntity comparisonDatabaseEntity = ImportAndGetEntity(file);
// Compare collections
Assert.IsTrue(_powerSHAPECollection[0].Equals(comparisonDatabaseEntity),
"Incorrectly returned that entities were not equal");
}
/// <summary>
/// A test for Id
/// </summary>
public virtual void IdTest(string file)
{
// Import entity
PSEntity importedEntity = ImportAndGetEntity(file);
// Check that the id is correct
Assert.AreEqual(_powerSHAPE.ExecuteEx(IdentifierAccessor(importedEntity) + "[" + importedEntity.Name + "].ID"),
importedEntity.Id,
"Returned incorrect id");
}
/// <summary>
/// Creates instance objects based on a string identifying an item's type in PowerSHAPE.
/// </summary>
/// <param name="powerSHAPE">The base instance to interact with PowerShape.</param>
/// <param name="type">The identifier PowerSHAPE uses to identify this type of entity.</param>
/// <param name="id">The identifier of the entity.</param>
/// <param name="name">The name of the entity.</param>
/// <returns>The new entity.</returns>
internal static object CreateEntity(PSAutomation powerSHAPE, string type, int id, string name)
{
PSEntity entity = null;
switch (type.ToUpper())
{
case PSAnnotation.ANNOTATION_IDENTIFIER:
entity = new PSAnnotation(powerSHAPE, id, name);
break;
case PSArc.ARC_IDENTIFIER:
entity = new PSArc(powerSHAPE, id, name);
break;
case PSCompCurve.COMPCURVE_IDENTIFIER:
case "COMPOSITE CURVE":
entity = new PSCompCurve(powerSHAPE, id, name);
break;
case PSCurve.CURVE_IDENTIFIER:
entity = new PSCurve(powerSHAPE, id, name);
break;
case PSElectrode.ELECTRODE_IDENTIFIER:
entity = new PSElectrode(powerSHAPE, id, name);
break;
case PSLine.LINE_IDENTIFIER:
entity = new PSLine(powerSHAPE, id, name);
break;
case PSPoint.POINT_IDENTIFIER:
entity = new PSPoint(powerSHAPE, id, name);
break;
case PSSolid.SOLID_IDENTIFIER:
entity = (PSEntity)PSSolidFactory.CreateSolid(powerSHAPE, id, name);
break;
case PSMesh.MESH_IDENTIFIER:
entity = new PSMesh(powerSHAPE, id, name);
break;
case PSSurface.SURFACE_IDENTIFIER:
entity = (PSEntity)PSSurfaceFactory.CreateSurface(powerSHAPE, id, name);
break;
case PSWorkplane.WORKPLANE_IDENTIFIER:
entity = new PSWorkplane(powerSHAPE, id, name);
break;
}
return(entity);
}
/// <summary>
/// This test checks that the Entity's Identifier is as expected
/// </summary>
public override void IdentifierTest(FileSystem.File fileToImport, string expectedIdentifier)
{
// Get entity
PSEntity importedEntity = ImportAndGetEntity(fileToImport);
// Check that the collection Identifier matches the entity type
string actualIdentifier = (string)importedEntity
.GetType().GetProperty("Identifier", BindingFlags.NonPublic | BindingFlags.Instance)
.GetValue(importedEntity, null);
Assert.AreEqual(expectedIdentifier, actualIdentifier);
}
/// <summary>
/// A test for Exists
/// </summary>
public virtual void ExistsTest(string file)
{
// Import entity
PSEntity entity = ImportAndGetEntity(file);
// Check that correct value is returned
Assert.IsTrue(entity.Exists, "Incorrectly stated that entity did not exist");
// Delete entity and check again
entity.Delete();
Assert.IsFalse(entity.Exists, "Incorrectly stated that entity existed");
}
public void AddMeshesToSelectionTest()
{
// Import three entities to be deleted
_powerSHAPE.ActiveModel.Import(new FileSystem.File(TestFiles.SINGLE_MESH1));
_powerSHAPE.ActiveModel.Import(new FileSystem.File(TestFiles.SINGLE_MESH2));
_powerSHAPE.ActiveModel.Import(new FileSystem.File(TestFiles.SINGLE_MESH3));
// Import single entity to remain
_powerSHAPE.ActiveModel.Import(new FileSystem.File(TestFiles.SINGLE_SURFACE));
// Get single entity
PSEntity testEntity = _powerSHAPE.ActiveModel.SelectedItems[0];
// Clear selection
_powerSHAPE.ActiveModel.ClearSelectedItems();
// Add multiple entities to selection
((PSEntitiesCollection <PSMesh>)_powerSHAPECollection).AddToSelection(true);
// Check the selection contains all three entities
if (_powerSHAPE.ActiveModel.SelectedItems.Count == 0) // Nothing was selected
{
Assert.Fail("Failed to select anything in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count == 4) // Everything was selected
{
Assert.Fail("Selected everything in PowerSHAPE");
}
// Check the test entity is not selected
foreach (PSEntity selectedEntity in _powerSHAPE.ActiveModel.SelectedItems)
{
if (selectedEntity.Equals(testEntity)) // Test entity is in selection
{
Assert.Fail("Added other entities to selection");
}
}
Assert.AreEqual(_powerSHAPE.ActiveModel.SelectedItems.Count,
3,
"Failed to add all " + _collectionType.ToLower() + " to collection");
}
public void AddElectrodesToSelectionTest()
{
_powerSHAPE.Models.CreateModelFromFile(new File(TestFiles.THREE_ELECTRODES_MODEL));
// Import single entity to remain
_powerSHAPE.ActiveModel.Import(new File(TestFiles.SINGLE_SURFACE));
// Get single entity
PSEntity testEntity = _powerSHAPE.ActiveModel.SelectedItems[0];
// Clear selection
_powerSHAPE.ActiveModel.ClearSelectedItems();
// Add multiple entities to selection
_powerSHAPE.ActiveModel.Electrodes.AddToSelection(true);
// Check the selection contains all three entities
if (_powerSHAPE.ActiveModel.SelectedItems.Count == 0) // Nothing was selected
{
Assert.Fail("Failed to select anything in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count == 4) // Everything was selected
{
Assert.Fail("Selected everything in PowerSHAPE");
}
// Check the test entity is not selected
foreach (PSEntity selectedEntity in _powerSHAPE.ActiveModel.SelectedItems)
{
if (selectedEntity.Equals(testEntity)) // Test entity is in selection
{
Assert.Fail("Added other entities to selection");
}
}
Assert.AreEqual(_powerSHAPE.ActiveModel.SelectedItems.Count,
3,
"Failed to add all " + _collectionType.ToLower() + " to collection");
}
public void RemoveElectrodesFromSelectionTest()
{
// Import file with three entities
_powerSHAPE.Models.CreateModelFromFile(new File(TestFiles.THREE_ELECTRODES_MODEL));
_powerSHAPECollection = _powerSHAPE.ActiveModel.Electrodes;
// Import single entity
_powerSHAPE.ActiveModel.Import(new File(TestFiles.SINGLE_SURFACE));
// Get single entity
PSEntity testEntity = _powerSHAPE.ActiveModel.SelectedItems[0];
// Select everything
_powerSHAPE.ActiveModel.SelectAll(true);
// Remove entities from selection
((PSEntitiesCollection <PSElectrode>)_powerSHAPECollection).RemoveFromSelection();
// Check the selection contains only the single entity
if (_powerSHAPE.ActiveModel.SelectedItems.Count == 0) // Everything was deselected
{
Assert.Fail("Deselected all entities in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count == 4) // Nothing was deselected
{
Assert.Fail("Deselected nothing in PowerSHAPE");
}
else if (_powerSHAPE.ActiveModel.SelectedItems.Count != 1) // More than just the single entity is selected
{
Assert.Fail("Failed to remove all " + _collectionType.ToLower() + "s from selection");
}
Assert.AreEqual(_powerSHAPE.ActiveModel.SelectedItems[0],
testEntity,
"Removed incorrect entities from the selection");
}
/// <summary>
/// Creates instance objects based on a string identifying an item's type in PowerSHAPE.
/// </summary>
/// <param name="powerSHAPE">The base instance to interact with PowerShape.</param>
/// <param name="type">The identifier PowerSHAPE uses to identify this type of entity.</param>
/// <param name="id">The identifier of the entity.</param>
/// <param name="name">The name of the entity.</param>
/// <returns>The new entity.</returns>
internal static object CreateEntity(
PSAutomation powerSHAPE,
int type,
int id,
string name,
string description,
string level)
{
PSEntity entity = null;
switch (type)
{
case 61:
entity = new PSAnnotation(powerSHAPE, id, name);
break;
case 52:
entity = new PSArc(powerSHAPE, id, name);
break;
case 59:
entity = new PSCompCurve(powerSHAPE, id, name);
break;
case 53:
entity = new PSCurve(powerSHAPE, id, name);
break;
case 58:
entity = new PSLine(powerSHAPE, id, name);
break;
case 49:
entity = new PSPoint(powerSHAPE, id, name);
break;
case 40:
entity = (PSEntity)PSSolidFactory.CreateSolid(powerSHAPE, id, name, description);
break;
case 60:
switch (description)
{
case "Mesh":
entity = new PSMesh(powerSHAPE, id, name);
break;
case "Point":
entity = new PSPoint(powerSHAPE, id, name);
break;
case "Electrode":
entity = new PSElectrode(powerSHAPE, id, name);
break;
}
break;
case 21:
entity = (PSEntity)PSSurfaceFactory.CreateSurface(powerSHAPE, id, name, description);
break;
case 54:
entity = new PSWorkplane(powerSHAPE, id, name);
break;
}
if (entity != null)
{
entity._levelNumber = int.Parse(level);
}
return(entity);
}
