private void AddYKStr(string[] strs, PLCEqu plcEqu, int commandid)
{
if (plcEqu.plc_pro.ykcfgList.Count == 1)
{
for (int i = 0; i < 2; i++)
{
yk yk = new yk();
yk.EquID = plcEqu.equ.EquID;
yk.AreaID = plcEqu.plc_pro.ykcfgList[0].AreaID;
yk.CommandID = commandid++;
yk.Mesg = commandDic[(int)yk.CommandID].Name;
yk.Points = i == 0 ? "1" : "0";
plcEqu.plc_pro.ykList.Add(yk);
}
}
else if (plcEqu.plc_pro.ykcfgList.Count > 1)
{
for (int i = 0; i < strs.Length; i++)
{
yk yk = new yk();
yk.EquID = plcEqu.equ.EquID;
yk.AreaID = plcEqu.plc_pro.ykcfgList[0].AreaID;
yk.CommandID = commandid++;
yk.Mesg = commandDic[(int)yk.CommandID].Name;
yk.Points = strs[i];
plcEqu.plc_pro.ykList.Add(yk);
}
}
}
/// <summary>
/// 根据点位生成2位字符串或者1位字符串
/// </summary>
/// <param name="str2byte">字符串数组</param>
/// <param name="stateid">状态id</param>
/// <param name="plcEqu">设备实体</param>
/// <param name="bitCount">点位个数</param>
private void Add2OR1Str(string[] str2byte, int stateid, PLCEqu plcEqu, int bitCount)
{
if (plcEqu.plc_pro.yxcfgList.Count > bitCount)
{
for (int i = 0; i < 4; i++)
{
yx yx = new yx();
yx.EquID = plcEqu.equ.EquID;
yx.IsState = 1;
yx.YXInfoMesg = str2byte[i];
yx.EquStateID = stateid++;
plcEqu.plc_pro.yxList.Add(yx);
}
}
else
{
for (int i = 0; i < 2; i++)
{
yx yx2 = new yx();
yx2.EquID = plcEqu.equ.EquID;
yx2.IsState = 1;
yx2.YXInfoMesg = i == 0 ? "1" : "0";
yx2.EquStateID = stateid++;
plcEqu.plc_pro.yxList.Add(yx2);
stateid++;
}
}
}
/// <summary>
/// 创建故障
/// </summary>
/// <param name="plcEqu"></param>
/// <param name="faultid"></param>
private static void CreateFaulte(PLCEqu plcEqu, int faultid)
{
yx yx = new yx();
yx.EquID = plcEqu.equ.EquID;
yx.IsState = 0;//故障
yx.YXInfoMesg = "1";
yx.EquStateID = faultid;
plcEqu.plc_pro.yxList.Add(yx);
}
/// <summary>
/// 新增遥测配置
/// </summary>
/// <param name="m_object"></param>
/// <param name="ConXml"></param>
/// <param name="container"></param>
private void AddYCConfig(PLCEqu m_object, XmlNode ConXml, List <yc> ycs, List <Yc_cfg> yccfgs, ref List <p_area_cfg> areas, List <MyObject> equlist, string mapid)
{
try
{
XmlNodeList PointNode = ConXml.SelectSingleNode("SY").ChildNodes;
m_object.equ.plcStationAddress = ConXml.Attributes["Station"].Value;
int areaID = SetPLCFartherInfo(mapid, equlist, m_object, "YC", ref areas);
if (PointNode != null)
{
var equYc = PlcString.p_config.ycList.Where(p => p.YCField == m_object.equ.EquTypeID).FirstOrDefault();
if (equYc != null)
{
equYc.YCFun = float.Parse(PointNode[0].Attributes["Bb"].Value);
equYc.EquID = m_object.equ.EquID;
var ycinfo = (from a in ycs where a.EquID == m_object.equ.EquID select a).FirstOrDefault();
if (ycinfo == null)
{
//入库
equYc.YCID = dbop.InsertYC(equYc);
ycinfo = equYc;
ycs.Add(new yc
{
EquID = equYc.EquID,
YCID = equYc.YCID,
YCCollecDown = equYc.YCCollecDown,
YCCollecUP = equYc.YCCollecUP,
YCField = equYc.YCField,
YCFun = equYc.YCFun,
YCRealDown = equYc.YCRealDown,
YCRealUP = equYc.YCRealUP
});
}
var yccfg = (from a in yccfgs where a.EquID == m_object.equ.EquID select a).FirstOrDefault();
if (yccfg == null)
{
Yc_cfg yc_cfg = new Yc_cfg
{
AddrAndBit = Convert.ToInt32(PointNode[0].Attributes["YC"].InnerText).ToString("X"),
EquID = m_object.equ.EquID,
YcID = ycinfo.YCID,
AreaID = areaID
};
if (dbop.InsertYCCfg(yc_cfg) != -1)
{
yccfgs.Add(yc_cfg);
}
}
}
}
}
catch (Exception e)
{
Log.WriteLog(e);
}
}
/// <summary>
/// 生成故障和状态
/// </summary>
/// <param name="plcEqu"></param>
/// <param name="strs"></param>
/// <param name="stateid"></param>
/// <param name="faultid"></param>
private void CreateFaultAndState(PLCEqu plcEqu, string[] strs, int stateid, int faultid)
{
var pl = plcEqu.plc_pro.yxcfgList.Where(p => p.IsError == 1).FirstOrDefault();
if (pl != null)//有故障
{
CreateFaulte(plcEqu, faultid);
Add2OR1Str(strs, stateid, plcEqu, 2);
}
else
{
Add2OR1Str(strs, stateid, plcEqu, 1);
}
}
/// <summary>
///
/// </summary>
/// <param name="strs">字符串</param>
/// <param name="plcEqu">实体</param>
/// <param name="stateid">状态id</param>
private void AddYXStr(string[] strs, PLCEqu plcEqu, int stateid)
{
for (int i = 0; i < strs.Length; i++)
{
yx yx = new yx();
yx.EquID = plcEqu.equ.EquID;
yx.IsState = 1;
yx.YXInfoMesg = strs[i];
yx.EquStateID = stateid++;
if (plcEqu.equtype == MyObject.ObjectType.P_JF)
{
if (i == strs.Length - 2)
{
yx.EquStateID = 202;
}
else if (i == strs.Length - 1)
{
yx.EquStateID = 232;
}
}
plcEqu.plc_pro.yxList.Add(yx);
}
}
/// <summary>
/// 新增PLC配置
/// </summary>
/// <param name="m_object">设备总实体类</param>
/// <param name="ConXml">xml文件句柄</param>
/// <param name="yx_cfgs">所有遥信配置</param>
/// <param name="yk_cfgs">所有遥控配置</param>
private void AddConfig(PLCEqu m_object, XmlNode ConXml, List <Yx_cfg> yx_cfgs, List <Yk_cfg> yk_cfgs, List <MyObject> equlist, ref List <p_area_cfg> areas, string mapid, List <Yx_cfg> yxcfgdb, List <Yk_cfg> ykcfgdb)
{
string yxTempNum, ykTempNum;
m_object.equ.plcStationAddress = ConXml.Attributes["Station"].Value;
XmlNodeList PointNode = ConXml.SelectSingleNode("SY").ChildNodes;
List <Yx_cfg> yxlist = new List <Yx_cfg>();
List <Yk_cfg> yklist = new List <Yk_cfg>();
int yxareaID = SetPLCFartherInfo(mapid, equlist, m_object, "YX", ref areas);
int ykareaID = SetPLCFartherInfo(mapid, equlist, m_object, "YK", ref areas);
for (int ii = 0; ii < PointNode.Count; ii++)
{
yxTempNum = PointNode[ii].Attributes["YX"].Value;
ykTempNum = PointNode[ii].Attributes["YK"].Value;
if (!yxTempNum.Equals("65535"))
{
var address = Convert.ToInt32(yxTempNum).ToString("X") + "." + Convert.ToInt32(PointNode[ii].Attributes["YXP"].Value).ToString("X");
// 去掉重复点位
if (yxlist.Where(p => p.AddrAndBit == address).FirstOrDefault() == null)
{
var contain = (from a in yx_cfgs where a.EquID == m_object.equ.EquID && a.AddrAndBit == address select a).FirstOrDefault();
if (contain == null)
{
yxlist.Add(new Yx_cfg
{
EquID = m_object.equ.EquID,
AddrAndBit = address,
IsError = 0,
AreaID = yxareaID
});
}
}
}
if (!ykTempNum.Equals("65535"))
{
var address = Convert.ToInt32(ykTempNum).ToString("X") + "." + Convert.ToInt32(PointNode[ii].Attributes["YKP"].Value).ToString("X");
if (yklist.Where(p => p.AddrAndBit == address).FirstOrDefault() == null)
{
var contain = (from a in yk_cfgs where a.EquID == m_object.equ.EquID && a.AddrAndBit == address select a).FirstOrDefault();
if (contain == null)
{
yklist.Add(new Yk_cfg
{
EquID = m_object.equ.EquID,
AddrAndBit = address,
AreaID = ykareaID
});
}
}
}
}
//点位排序
var yxorder = yxlist.OrderBy(p => p.AddrAndBit).ToList();
var ykorder = yklist.OrderBy(p => p.AddrAndBit).ToList();
for (int i = 0; i < yxorder.Count(); i++)
{
yxorder[i].Order = i;
}
//if (((m_object.equtype.ToString()).StartsWith("P_L")) && yxorder.Count() > 1)
//{
// yxorder[yxorder.Count() - 1].IsError = 1;
//}
if (((m_object.equtype.ToString()).StartsWith("P_JF")) && yxorder.Count() > 1)
{
yxorder[yxorder.Count() - 1].IsError = 1;
}
for (int i = 0; i < ykorder.Count(); i++)
{
ykorder[i].Order = i;
}
if (yxorder.Count > 0)//该设备有遥信配置进行添加
{
yx_cfgs.AddRange(yxorder);
//数据库操作
yxcfgdb.AddRange(yxorder);
//dbop.InsertYXConfig(yxorder);
}
if (ykorder.Count > 0)//该设备有遥控配置进行添加
{
yk_cfgs.AddRange(ykorder);
//数据库操作
ykcfgdb.AddRange(ykorder);
//dbop.InsertYKConfig(ykorder);
}
}
/// <summary>
/// 读取地图中的配置
/// </summary>
/// <param name="mapID">地图ID</param>
/// <param name="path">配置文件路径</param>
/// <param name="mapHeight">地图高度</param>
/// <param name="MapWidth">地图宽度</param>
/// <param name="readEquType">该设备类型是否进行读取</param>
/// <returns>读取是否成功</returns>
public bool Read(string mapID, string path, int mapHeight, int MapWidth, ReadEquType readEquType)
{
XmlDocument doc = new XmlDocument();
// 缓存设备
List <MyObject> equList = new List <MyObject>();
try
{
doc.Load(path);
// 设备加载
List <Equ> equs = ds.ReadEqu(Convert.ToInt32(mapID));
List <yx> yxs = ds.GetYXs();
List <Yx_cfg> yxcfgs = ds.GetYXcfgs();
List <yk> yks = ds.GetYks();
List <Yk_cfg> ykcfgs = ds.GetYKcfgs();
List <yc> ycs = ds.GetYcs();
List <Yc_cfg> yccfgs = ds.GetYccfgs();
List <p_area_cfg> areas = ds.GetAllArea();
Log.WriteLog("start readxml:" + DateTime.Now.ToString("HH:mm:ss.fff"));
List <Yx_cfg> yxcfgdb = new List <Yx_cfg>();
List <Yk_cfg> ykcfgdb = new List <Yk_cfg>();
//交大地图的宽度和高度
int width = Convert.ToInt32(doc.GetElementsByTagName("PicInfo")[0].Attributes["width"].InnerText);
int hight = Convert.ToInt32(doc.GetElementsByTagName("PicInfo")[0].Attributes["hight"].InnerText);
XmlNodeList xnl = doc.GetElementsByTagName("ob");
if (xnl != null)
{
//读取父设备信息
string tvFarther = ds.GetFartherID("TV");
string epFarther = ds.GetFartherID("EP");
string firFarther = ds.GetFartherID("F");
for (int i = 0; i < xnl.Count; i++)
{
MyObject m_object = null;
//m_object = new MyObject();
string type = xnl[i].Attributes["Type"].Value;
XmlNode ConXml = xnl[i].SelectSingleNode("ControlObject");
XmlNode drawob = xnl[i].SelectSingleNode("DrawOb");
XmlNode name = drawob.SelectSingleNode("ObjectName");
XmlNode xy = drawob.SelectSingleNode("EndPoint");
if (Convert.ToInt32(xy.Attributes["X"].Value) < 0)
{
continue;
}
if (Convert.ToInt32(xy.Attributes["Y"].Value) < 0)
{
continue;
}
switch (type)
{
case "12836": //情报板
#region 情报板
if (!readEquType.CMS)
{
continue;
}
m_object = new CMObject();
string strName = ConXml.Attributes["StrName"].Value;
if (strName.IndexOf("1") > 0) //门架
{
m_object.equtype = MyObject.ObjectType.CM;
}
//else //if (strName.IndexOf("2") > 0)//限速标志
//{
// m_object.equtype = "S";
//}
else //F板
{
m_object.equtype = MyObject.ObjectType.CF;
}
if (strName.IndexOf("r") > 0)
{
m_object.equ.DirectionID = 1;
}
if (strName.IndexOf("l") > 0)
{
m_object.equ.DirectionID = 2;
}
#region 情报板配置信息读取
XmlDocument xd = new XmlDocument();
var cmsNode = ConXml.SelectSingleNode("ExtAttribute");
if (cmsNode == null)
{
continue;
}
string cmsInfo = cmsNode.InnerText;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
xd.LoadXml(cmsInfo);
((CMSEqu)m_object).cms_pro.CMSWidth = Convert.ToInt32(xd.GetElementsByTagName("CMS")[0].Attributes["Width"].InnerText);
((CMSEqu)m_object).cms_pro.CMSHeight = Convert.ToInt32(xd.GetElementsByTagName("CMS")[0].Attributes["Height"].InnerText);
((CMSEqu)m_object).cms_pro.EquID = m_object.equ.EquID;
((CMSEqu)m_object).cms_pro.FontType = "楷体";
((CMSEqu)m_object).cms_pro.FontColor = "黄";
((CMSEqu)m_object).cms_pro.BackColor = "黑";
((CMSEqu)m_object).cms_pro.FontSize = 24;
((CMSEqu)m_object).cms_pro.ContentType = 1;
((CMSEqu)m_object).cms_pro.CharBetween = 5;
((CMSEqu)m_object).cms_pro.OutType = 1;
((CMSEqu)m_object).cms_pro.OutSpeed = 20;
((CMSEqu)m_object).cms_pro.StayTime = 200;
((CMSEqu)m_object).cms_pro.BlankCount = 0;
((CMSEqu)m_object).cms_pro.MinFontSize = 16;
((CMSEqu)m_object).cms_pro.SupportPic = 1;
((CMSEqu)m_object).cms_pro.PicLocation = "CmsListBitmap1";
#endregion
m_object.equ.TaskWV = 1;
#endregion
break;
case "12839": //限速标志
m_object = new MyObject();
if (!readEquType.S)
{
continue;
}
m_object.equtype = MyObject.ObjectType.S;
m_object.equ.TaskWV = 1;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
break;
case "12838": //车检器
if (!readEquType.VC)
{
continue;
}
m_object = new MyObject();
m_object.equtype = MyObject.ObjectType.VC;
m_object.equ.AlarmMethod = "NORMAL";
m_object.equ.TaskWV = 1;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
break;
case "12862": //气象仪
if (!readEquType.VI)
{
continue;
}
m_object = new MyObject();
m_object.equtype = MyObject.ObjectType.VI;
m_object.equ.AlarmMethod = "YW";
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.TaskWV = 1;
break;
case "12834": //广播
continue;
case "12832": //紧急电话
if (!readEquType.EP)
{
continue;
}
m_object = new EPEqu();
m_object.equtype = MyObject.ObjectType.EP_T;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
AddEPConfig((EPEqu)m_object, ConXml);
break;
case "12833": //摄像机
if (!readEquType.TV)
{
continue;
}
m_object = new TVEqu();
switch (ConXml.Attributes["StrName"].Value)
{
case "lcctv1_mov.bmp":
case "rcctv1_mov.bmp":
m_object.equtype = MyObject.ObjectType.TV_CCTV_Gun;
break;
case "rcctv2_mov.bmp":
case "lcctv2_mov.bmp":
m_object.equtype = MyObject.ObjectType.TV_CCTV_E;
break;
default:
m_object.equtype = MyObject.ObjectType.TV_CCTV_Ball;
break;
}
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
if (!ConXml.Attributes["Region"].Value.Equals("0"))
{
AddCCTVConfig((TVEqu)m_object, ConXml.Attributes["Region"].Value);
}
break;
case "12835": //火灾
if (!readEquType.FIRE)
{
continue;
}
//m_object = new MyObject();
XmlNode addressxy = drawob.SelectSingleNode("EndPoint");
int x = Convert.ToInt32(addressxy.Attributes["X"].Value) * MapWidth / width;
AddFireConfig(equList, ConXml, name.InnerText, x, ref firFarther, mapID);
continue;
#region plc
case "12837": //车道指示器
if (!readEquType.P_TL)
{
continue;
}
m_object = new PLCEqu();
switch (ConXml.Attributes["StrName"].Value)
{
case "lindicator_mov.bmp": //左
case "uindicator_mov.bmp":
m_object.equtype = MyObject.ObjectType.P_TL5_Left;
break;
case "rindicator_mov.bmp": //右
case "dindicator_mov.bmp":
m_object.equtype = MyObject.ObjectType.P_TL5_Right;
break;
case "sindicator_mov.bmp":
m_object.equtype = MyObject.ObjectType.P_TL2_Close;
break;
default:
continue;
}
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
case "12831": //交通灯
if (!readEquType.P_HL)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_HL2;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
case "12830": //照明
if (!readEquType.LIGHT)
{
continue;
}
m_object = new PLCEqu();
if (name.InnerText.IndexOf("应") > 0 || name.InnerText.IndexOf("引") > 0) //基本
{
m_object.equtype = MyObject.ObjectType.P_LYJ;
}
else if (name.InnerText.IndexOf("JQ") > 0 || name.InnerText.IndexOf("加") > 0) //加强
{
m_object.equtype = MyObject.ObjectType.P_LJQ;
}
else //基本
{
m_object.equtype = MyObject.ObjectType.P_L;
}
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
case "12829": //风机
if (!readEquType.P_JF)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_JF;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
case "12846": //GJ
if (!readEquType.GJ)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_GJ;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12843": //CO
if (!readEquType.CO)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_CO;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12844": //VI
if (!readEquType.VI)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_VI;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12848": //TW
if (!readEquType.TW)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_TW;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12842": //横通门
if (!readEquType.TD)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_TD;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
case "12845": //高位水池
if (!readEquType.LLID)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_LLDI;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12855": //水泵
if (!readEquType.P_P)
{
continue;
}
m_object = new PLCEqu();
m_object.equtype = MyObject.ObjectType.P_P;
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddYCConfig(m_object as PLCEqu, ConXml, ycs, yccfgs, ref areas, equList, mapID);
break;
case "12840": //车行横通标志\转弯灯
if (!readEquType.P_TL2)
{
continue;
}
m_object = new PLCEqu();
switch (ConXml.Attributes["StrName"].Value)
{
case "uvehicleflag_mov.bmp": //向上
m_object.equtype = MyObject.ObjectType.P_TL2_UP;
break;
case "dvehicleflag_mov.bmp": //向下
m_object.equtype = MyObject.ObjectType.P_TL2_Down;
break;
default:
continue;
}
m_object.equ.EquID = NameTool.CreateEquId(m_object.equtype);
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
AddConfig((PLCEqu)m_object, ConXml, yxcfgs, ykcfgs, equList, ref areas, mapID, yxcfgdb, ykcfgdb);
break;
#endregion
default:
continue;
}
m_object.equ.EquName = name.InnerText;
m_object.equ.PileNo = ConXml.Attributes["Badge"].Value;
m_object.equ.PointX = (Convert.ToInt32(xy.Attributes["X"].Value) * MapWidth / width).ToString();
m_object.equ.PointY = "-" + Convert.ToInt32(xy.Attributes["Y"].Value) * mapHeight / hight;
m_object.equ.MapID = mapID;
m_object.equ.plcStationAddress = ConXml.Attributes["Station"].Value;
m_object.equ.AddressDiscribe = xnl[i].Attributes["ID"].Value;
#region 子系统
if ("-1".Equals(ConXml.Attributes["Station"].Value) && m_object.equtype != MyObject.ObjectType.TV_CCTV_Gun)
{
if (m_object.equtype == MyObject.ObjectType.TV_CCTV_Gun || m_object.equtype == MyObject.ObjectType.TV_CCTV_E || m_object.equtype == MyObject.ObjectType.TV_CCTV_Ball || m_object.equtype == MyObject.ObjectType.EP_T)
{
}
else
{
continue;
}
}
if (m_object.equ.EquTypeID.StartsWith("TV_CCTV"))
{
if (tvFarther == null)
{
TVEqu tvInfo = new TVEqu();
tvInfo.equtype = MyObject.ObjectType.TV;
tvInfo.equ.EquID = NameTool.CreateEquId(tvInfo.equtype);
tvInfo.equ.EquName = "摄像机流媒体服务器";
tvInfo.equ.PointX = "0";
tvInfo.equ.PointY = "0";
tvInfo.equ.TaskWV = 1;
tvInfo.equ.MapID = mapID;
equList.Add(tvInfo);
tvFarther = tvInfo.equ.EquID;
}
m_object.equ.FatherEquID = tvFarther;
}
if (m_object.equ.EquTypeID.StartsWith("EP_"))
{
if (epFarther == null)
{
EPEqu epInfo = new EPEqu();
epInfo.equtype = MyObject.ObjectType.EP;
epInfo.equ.EquID = NameTool.CreateEquId(epInfo.equtype);
epInfo.equ.EquName = "紧急电话主机";
epInfo.equ.PointX = "50";
epInfo.equ.PointY = "0";
epInfo.equ.TaskWV = 1;
epInfo.equ.MapID = mapID;
equList.Add(epInfo);
epFarther = epInfo.equ.EquID;
}
m_object.equ.FatherEquID = epFarther;
}
if (m_object.equ.EquTypeID.StartsWith("F_"))
{
}
#endregion
equList.Add(m_object);
}
int InsertCount = 0;
if (equList.Count > 0)
{
InsertCount = dbop.InsertEqu(equList);
List <Tv_cctv_cfg> tvinfos = new List <Tv_cctv_cfg>();
List <f_c_cfg> fireinfos = new List <f_c_cfg>();
List <ep_c_cfg> epinfos = new List <ep_c_cfg>();
List <c_cfg> cms = new List <c_cfg>();
Log.WriteLog("yxcfgdb:" + DateTime.Now);
if (yxcfgdb.Count > 0)
{
dbop.InsertYXConfig(yxcfgdb);
}
Log.WriteLog("ykcfgdb:" + DateTime.Now);
if (ykcfgdb.Count > 0)
{
dbop.InsertYKConfig(ykcfgdb);
}
Log.WriteLog("子系统:" + DateTime.Now);
for (int i = 0; i < equList.Count; i++)
{
if (equList[i] is FireEqu)//插入火灾配置信息
{
fireinfos.Add((equList[i] as FireEqu).fire_pro);
}
else if (equList[i] is TVEqu)//插入摄像机配置信息
{
if ((equList[i] as TVEqu).tv_pro.CCTVID != null)
{
tvinfos.Add((equList[i] as TVEqu).tv_pro);
}
}
else if (equList[i] is EPEqu)//插入紧急电话配置
{
epinfos.Add((equList[i] as EPEqu).ep_pro);
}
else if (equList[i] is CMSEqu)//插入plc配置信息
{
cms.Add((equList[i] as CMSEqu).cms_pro);
}
}
Log.WriteLog("火灾配置条数:" + dbop.InsertFire(fireinfos));
Log.WriteLog("摄像机配置条数：" + dbop.InsertCCTV(tvinfos));
Log.WriteLog("紧急电话配置条数：" + dbop.InsertEpList(epinfos));
Log.WriteLog("情报板配置条数：" + dbop.InsertC_cfgList(cms));
}
//Log.WriteLog("InsertCount:" + InsertCount);
}
}
catch (Exception e)
{
Log.WriteLog(e);
return(false);
}
return(true);
}
/// <summary>
/// 设置plc父设备信息配置
/// </summary>
/// <param name="mapID">地图ID</param>
/// <param name="equList">设备列表</param>
/// <param name="m_object">实体对象</param>
/// <param name="note">YK,YX,YC 设置需要的分区类型</param>
/// <returns>分区编号，-1表示失败</returns>
private int SetPLCFartherInfo(string mapID, List <MyObject> equList, MyObject m_object, string note, ref List <p_area_cfg> areaList)
{
int areaID = -1;
try
{
string farterEquid = string.Empty;
farterEquid = (from a in equList where a.equtype == MyObject.ObjectType.P && a.equ.plcStationAddress == m_object.equ.plcStationAddress select a.equ.EquID).FirstOrDefault();
if (string.IsNullOrEmpty(farterEquid))
{
PLCEqu plcInfo = new PLCEqu();
plcInfo.equtype = MyObject.ObjectType.P;
plcInfo.equ.EquID = NameTool.CreateEquId(plcInfo.equtype);
plcInfo.equ.EquName = plcInfo.equ.EquID;
plcInfo.equ.plcStationAddress = m_object.equ.plcStationAddress;
plcInfo.equ.AddressDiscribe = m_object.equ.plcStationAddress;
plcInfo.equ.PointX = (Convert.ToInt32(m_object.equ.PointX) + 20).ToString();
plcInfo.equ.PointY = m_object.equ.PointY;
plcInfo.equ.TaskWV = 1;
plcInfo.equ.MapID = mapID;
equList.Add(plcInfo);
farterEquid = plcInfo.equ.EquID;
}
m_object.equ.FatherEquID = farterEquid;
var temp = (from a in areaList where a.equid == farterEquid && a.note == note select a).FirstOrDefault();
if (temp == null)
{
p_area_cfg areainfo = new p_area_cfg();
areainfo = (from a in PlcString.p_config.areas where a.note == note select a).FirstOrDefault();
areainfo.equid = m_object.equ.FatherEquID;
if (areainfo != null)
{
areaID = dbop.InsertArea(areainfo);
areaList.Add(new p_area_cfg
{
equid = areainfo.equid,
id = areaID,
note = areainfo.note,
point = areainfo.point,
yclength = areainfo.yclength,
ycstartAddress = areainfo.ycstartAddress,
yxcommlength = areainfo.yxcommlength,
yxlength = areainfo.yxlength,
yxstartAddress = areainfo.yxstartAddress
});
//areaList.Clear();
//areaList = ds.GetAllArea();
}
}
else
{
areaID = temp.id;
}
}
catch (Exception e)
{
Log.WriteLog("SetPLCFartherInfo:" + e);
return(-1);
}
return(areaID);
}