// Pre
public override void TranslateC2T(MECMOD.Shape cShape)
{
PARTITF.Hole hole = (PARTITF.Hole)cShape;
double diameter = 0.0;
double depth = 0.0;
double bottomAngle = 180.0;
double headDiameter = 0.0;
double headAngle = 0.0;
double headDepth = 0.0;
object[] org = new object[3];
hole.GetOrigin(org);
diameter = hole.Diameter.Value;
depth = hole.BottomLimit.Dimension.Value;
if (hole.BottomType == PARTITF.CatHoleBottomType.catVHoleBottom)
{
bottomAngle = hole.BottomAngle.Value;
}
if (hole.Type == PARTITF.CatHoleType.catCounterboredHole)
{
headDiameter = hole.HeadDiameter.Value;
headDepth = hole.HeadDepth.Value;
PartManager.tFeatures.AddNewSolidHoleCounterboredFeature(hole.get_Name(), GetTargetFace(hole), (double)org[0], (double)org[1], (double)org[2], headDiameter / 2, headDepth, diameter / 2, depth - headDepth, bottomAngle);
}
else if (hole.Type == PARTITF.CatHoleType.catCountersunkHole)
{
headDepth = hole.HeadDepth.Value;
headAngle = hole.HeadAngle.Value;
headDiameter = diameter + 2 * Math.Tan(headAngle / 2 * Math.PI / 180) * headDepth;
PartManager.tFeatures.AddNewSolidHoleCountersunkFeature(hole.get_Name(), GetTargetFace(hole), (double)org[0], (double)org[1], (double)org[2], diameter / 2, depth, headDiameter / 2, headAngle, bottomAngle);
}
else if (hole.Type == PARTITF.CatHoleType.catSimpleHole)
{
PartManager.tFeatures.AddNewSolidHoleSimpleFeature(hole.get_Name(), GetTargetFace(hole), (double)org[0], (double)org[1], (double)org[2], diameter / 2, depth);
}
}
// Post
public override void TranslateT2C(TransCAD.IFeature tFeature)
{
double diameter = 0.0;
double depth = 0.0;
double bottomAngle = 180.0;
double headDiameter = 0.0;
double headAngle = 0.0;
double headDepth = 0.0;
double[] org = new double[3];
PARTITF.Hole cHole = null;
if (tFeature.Type == TransCAD.FeatureType.StdSolidHoleSimpleFeature)
{
TransCAD.IStdSolidHoleSimpleFeature tHoleSimple = (TransCAD.IStdSolidHoleSimpleFeature)tFeature;
tHoleSimple.CenterPoint(out org[0], out org[1], out org[2]);
depth = tHoleSimple.Depth;
diameter = tHoleSimple.Radius * 2;
INFITF.Reference targetFace = GetTargetFace(tHoleSimple.TargetFace.ReferenceeName);
cHole = PartManager.cShapeFactory.AddNewHole(targetFace, 10.0);
cHole.Type = PARTITF.CatHoleType.catSimpleHole;
cHole.SetOrigin(org[0], org[1], org[2]);
cHole.BottomLimit.Dimension.Value = depth;
cHole.Diameter.Value = diameter;
PartManager.ReferenceManager.NameMap.Add(tHoleSimple.Name, cHole.get_Name());
}
else if (tFeature.Type == TransCAD.FeatureType.StdSolidHoleCounterboredFeature)
{
TransCAD.StdSolidHoleCounterboredFeature tHoleCounterbored = (TransCAD.StdSolidHoleCounterboredFeature)tFeature;
tHoleCounterbored.CenterPoint(out org[0], out org[1], out org[2]);
headDepth = tHoleCounterbored.StartDepth;
headDiameter = tHoleCounterbored.StartRadius * 2;
depth = tHoleCounterbored.EndDepth + headDepth;
diameter = tHoleCounterbored.EndRadius * 2;
bottomAngle = tHoleCounterbored.Angle;
INFITF.Reference targetFace = GetTargetFace(tHoleCounterbored.TargetFace.ReferenceeName);
cHole = PartManager.cShapeFactory.AddNewHole(targetFace, 10.0);
cHole.Type = PARTITF.CatHoleType.catCounterboredHole;
cHole.SetOrigin(org[0], org[1], org[2]);
cHole.HeadDepth.Value = headDepth;
cHole.HeadDiameter.Value = headDiameter;
cHole.BottomLimit.Dimension.Value = depth;
cHole.Diameter.Value = diameter;
PartManager.ReferenceManager.NameMap.Add(tHoleCounterbored.Name, cHole.get_Name());
}
else if (tFeature.Type == TransCAD.FeatureType.StdSolidHoleCountersunkFeature)
{
TransCAD.IStdSolidHoleCountersunkFeature tHoleCountersunk = (TransCAD.IStdSolidHoleCountersunkFeature)tFeature;
tHoleCountersunk.CenterPoint(out org[0], out org[1], out org[2]);
headAngle = tHoleCountersunk.SinkAngle;
headDiameter = tHoleCountersunk.SinkRadius * 2;
depth = tHoleCountersunk.Depth;
diameter = tHoleCountersunk.Radius * 2;
headDepth = 0.5 * (headDiameter - diameter) / Math.Tan(0.5 * headAngle * Math.PI / 180);
bottomAngle = tHoleCountersunk.BottomAngle;
INFITF.Reference targetFace = GetTargetFace(tHoleCountersunk.TargetFace.ReferenceeName);
cHole = PartManager.cShapeFactory.AddNewHole(targetFace, 10.0);
cHole.Type = PARTITF.CatHoleType.catCountersunkHole;
cHole.CounterSunkMode = PARTITF.CatCSHoleMode.catCSModeAngleDiameter;
cHole.SetOrigin(org[0], org[1], org[2]);
cHole.HeadAngle.Value = headAngle;
cHole.HeadDepth.Value = headDepth;
cHole.BottomLimit.Dimension.Value = depth;
cHole.Diameter.Value = diameter;
PartManager.ReferenceManager.NameMap.Add(tHoleCountersunk.Name, cHole.get_Name());
}
if (bottomAngle != 180.0)
{
cHole.BottomType = PARTITF.CatHoleBottomType.catVHoleBottom;
cHole.BottomAngle.Value = bottomAngle;
}
PartManager.cPart.UpdateObject(cHole);
}