protected void Page_Load(object sender, System.EventArgs e)
{
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
nChartControl1.Settings.JitterMode = JitterMode.Enabled;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Clustered Float Bar");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.Axis(StandardAxis.Depth).Visible = false;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
// setup X axis
NOrdinalScaleConfigurator scaleX = (NOrdinalScaleConfigurator)chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator;
scaleX.MajorTickMode = MajorTickMode.AutoMaxCount;
// add interlace stripe
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back, ChartWallType.Left };
scaleY.StripStyles.Add(stripStyle);
// setup the bar series
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.Name = "Bar";
bar.DataLabelStyle.Visible = false;
bar.Values.FillRandomRange(Random, 8, 7, 15);
// setup the floatbar series
NFloatBarSeries floatbar = (NFloatBarSeries)chart.Series.Add(SeriesType.FloatBar);
floatbar.MultiFloatBarMode = MultiFloatBarMode.Clustered;
floatbar.Name = "Floatbar";
floatbar.DataLabelStyle.Visible = false;
floatbar.AddDataPoint(new NFloatBarDataPoint(3.1, 5.2));
floatbar.AddDataPoint(new NFloatBarDataPoint(4.0, 6.1));
floatbar.AddDataPoint(new NFloatBarDataPoint(2.0, 6.4));
floatbar.AddDataPoint(new NFloatBarDataPoint(5.3, 7.3));
floatbar.AddDataPoint(new NFloatBarDataPoint(3.8, 8.4));
floatbar.AddDataPoint(new NFloatBarDataPoint(4.0, 7.7));
floatbar.AddDataPoint(new NFloatBarDataPoint(2.9, 4.1));
floatbar.AddDataPoint(new NFloatBarDataPoint(5.0, 7.2));
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, nChartControl1.Legends[0]);
}
protected void Page_Load(object sender, EventArgs e)
{
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("DateTime Smooth Line");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// no legend
nChartControl1.Legends.Clear();
// setup chart
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
// setup X axis
NDateTimeScaleConfigurator scaleX = new NDateTimeScaleConfigurator();
scaleX.EnableUnitSensitiveFormatting = false;
scaleX.LabelValueFormatter = new NDateTimeValueFormatter("dd MMM");
scaleX.LabelStyle.Angle = new NScaleLabelAngle(90);
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = scaleX;
// setup Y axis
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
scaleY.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleY.StripStyles.Add(stripStyle);
// add the line
NSmoothLineSeries line = (NSmoothLineSeries)chart.Series.Add(SeriesType.SmoothLine);
line.Name = "Smooth Line";
line.InflateMargins = true;
line.DataLabelStyle.Visible = false;
line.MarkerStyle.Visible = true;
line.MarkerStyle.PointShape = PointShape.Cylinder;
line.MarkerStyle.AutoDepth = false;
line.MarkerStyle.Width = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Height = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Depth = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.UseXValues = true;
line.UseZValues = false;
line.Use1DInterpolationForXYScatter = true;
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
GenreateYValues(nValuesCount);
GenreateXValues(nValuesCount);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
WebExamplesUtilities.FillComboWithColorNames(UpColorDropDownList, KnownColor.Black);
WebExamplesUtilities.FillComboWithColorNames(DownColorDropDownList, KnownColor.Black);
WebExamplesUtilities.FillComboWithValues(UpStrokeDropDownList, 1, 3, 1);
UpStrokeDropDownList.SelectedIndex = 1;
WebExamplesUtilities.FillComboWithValues(DownStrokeDropDownList, 1, 3, 1);
reversalAmountDropdownlist.Items.AddRange(new ListItem[]
{ new ListItem("0.5"),
new ListItem("1"),
new ListItem("2"),
new ListItem("1%"),
new ListItem("2%"),
new ListItem("5%") });
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// no legend
nChartControl1.Legends.Clear();
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Kagi Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
// setup X axis
NPriceScaleConfigurator priceConfigurator = new NPriceScaleConfigurator();
priceConfigurator.InnerMajorTickStyle.LineStyle.Width = new NLength(0);
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = priceConfigurator;
// setup Y axis
NLinearScaleConfigurator linearScale = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
linearScale.StripStyles.Add(stripStyle);
//Setup Kagi series
NKagiSeries kagi = (NKagiSeries)chart.Series.Add(SeriesType.Kagi);
kagi.UpStrokeStyle.Color = WebExamplesUtilities.ColorFromDropDownList(UpColorDropDownList);
kagi.DownStrokeStyle.Color = WebExamplesUtilities.ColorFromDropDownList(DownColorDropDownList);
kagi.UpStrokeStyle.Width = new NLength(Convert.ToInt32(UpStrokeDropDownList.SelectedValue));
kagi.DownStrokeStyle.Width = new NLength(Convert.ToInt32(DownStrokeDropDownList.SelectedValue));
kagi.UseXValues = true;
switch (reversalAmountDropdownlist.SelectedIndex)
{
case 0:
kagi.ReversalAmount = 0.5;
kagi.ReversalAmountInPercents = false;
break;
case 1:
kagi.ReversalAmount = 1;
kagi.ReversalAmountInPercents = false;
break;
case 2:
kagi.ReversalAmount = 2;
kagi.ReversalAmountInPercents = false;
break;
case 3:
kagi.ReversalAmount = 1;
kagi.ReversalAmountInPercents = true;
break;
case 4:
kagi.ReversalAmount = 2;
kagi.ReversalAmountInPercents = true;
break;
case 5:
kagi.ReversalAmount = 5;
kagi.ReversalAmountInPercents = true;
break;
}
GenerateData(kagi);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
public override void Initialize()
{
base.Initialize();
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Real Time Point");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
title.ContentAlignment = ContentAlignment.BottomCenter;
title.Location = new NPointL(new NLength(50, NRelativeUnit.ParentPercentage), new NLength(2, NRelativeUnit.ParentPercentage));
// no legend
nChartControl1.Legends.Clear();
// do not update automatic legends
nChartControl1.ServiceManager.LegendUpdateService.UpdateAutoLegends();
nChartControl1.ServiceManager.LegendUpdateService.Stop();
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.Projection.SetPredefinedProjection(PredefinedProjection.PerspectiveTilted);
chart.BoundsMode = BoundsMode.Fit;
chart.Enable3D = true;
// make the aspect 1:1:1
chart.Width = 50.0f;
chart.Height = 50.0f;
chart.Depth = 50.0f;
// configure the y axis
NAxis yAxis = chart.Axis(StandardAxis.PrimaryY);
NLinearScaleConfigurator linearScale = yAxis.ScaleConfigurator as NLinearScaleConfigurator;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
linearScale.MajorGridStyle.LineStyle.Color = Color.LightSteelBlue;
linearScale.InnerMinorTickStyle.Visible = false;
linearScale.InnerMajorTickStyle.Visible = false;
linearScale.LabelFitModes = new LabelFitMode[0];
// configure the axes
ConfigureAxis(chart.Axis(StandardAxis.PrimaryX));
ConfigureAxis(chart.Axis(StandardAxis.PrimaryY));
ConfigureAxis(chart.Axis(StandardAxis.Depth));
// apply layout
ConfigureStandardLayout(chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
DataPointsPerSphereComboBox.Items.Add("100");
DataPointsPerSphereComboBox.Items.Add("1000");
DataPointsPerSphereComboBox.Items.Add("10000");
DataPointsPerSphereComboBox.SelectedIndex = 0;
UseHardwareAccelerationCheckBox.Checked = true;
StartTimer();
}
protected void Page_Load(object sender, System.EventArgs e)
{
// init form controls
if (!IsPostBack)
{
AngleModeDropDownList.Items.Add("View");
AngleModeDropDownList.Items.Add("Scale");
AngleModeDropDownList.SelectedIndex = 1;
AllowFlipCheckBox.Checked = false;
FitAxisContentInBox.Checked = true;
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
nChartControl1.Settings.JitterMode = JitterMode.Enabled;
nChartControl1.Panels.Clear();
// set a chart title
NLabel header = new NLabel("Axis Labels Orientation");
nChartControl1.Panels.Add(header);
header.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
header.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
header.Margins = new NMarginsL(10, 10, 10, 4);
header.DockMode = PanelDockMode.Top;
// setup the chart
NCartesianChart chart = new NCartesianChart();
nChartControl1.Panels.Add(chart);
chart.Enable3D = true;
chart.Fit3DAxisContent = FitAxisContentInBox.Checked;
chart.DockMode = PanelDockMode.Fill;
chart.BorderStyle = new NStrokeBorderStyle(BorderShape.RoundedRect);
chart.BackgroundFillStyle = new NGradientFillStyle(Color.White, Color.LightGray);
chart.Margins = new NMarginsL(10, 0, 10, 10);
chart.Padding = new NMarginsL(2, 2, 2, 2);
// set predefined projection and lighting
chart.Projection.SetPredefinedProjection(PredefinedProjection.PerspectiveTilted);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.MetallicLustre);
chart.Depth = 50;
chart.Width = 50;
chart.Height = 50;
chart.BoundsMode = BoundsMode.Fit;
chart.Location = new NPointL(new NLength(10, NRelativeUnit.ParentPercentage), new NLength(10, NRelativeUnit.ParentPercentage));
chart.Size = new NSizeL(new NLength(80, NRelativeUnit.ParentPercentage), new NLength(80, NRelativeUnit.ParentPercentage));
// add interlaced stripe
NStandardScaleConfigurator scaleConfiguratorY = (NStandardScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle();
stripStyle.FillStyle = new NColorFillStyle(Color.Beige);
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
stripStyle.Interlaced = true;
scaleConfiguratorY.StripStyles.Add(stripStyle);
// add series
Color[] seriesColors = new Color[] { Color.Crimson, Color.Orange, Color.OliveDrab };
int dataItemsCount = 6;
for (int i = 0; i < seriesColors.Length; i++)
{
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.BarShape = BarShape.SmoothEdgeBar;
bar.FillStyle = new NColorFillStyle(seriesColors[i]);
bar.Name = "Series " + i.ToString();
bar.Values.FillRandomRange(Random, dataItemsCount, 10, 30);
bar.InflateMargins = true;
bar.DataLabelStyle.Visible = false;
}
// configure the x axis labels (categories)
NOrdinalScaleConfigurator ordinalScale = chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.Title.Text = "Categories Title";
ordinalScale.MajorTickMode = MajorTickMode.CustomStep;
ordinalScale.LabelFitModes = new LabelFitMode[] { LabelFitMode.Stagger2, LabelFitMode.AutoScale };
for (int i = 0; i < dataItemsCount; i++)
{
ordinalScale.Labels.Add("S" + i.ToString());
}
// configure the depth axis labels (series)
ordinalScale = chart.Axis(StandardAxis.Depth).ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.Title.Text = "Series Title";
ordinalScale.MajorTickMode = MajorTickMode.CustomStep;
ordinalScale.Labels.Add("S1");
ordinalScale.Labels.Add("S2");
ordinalScale.Labels.Add("S3");
ordinalScale.MajorGridStyle.SetShowAtWall(ChartWallType.Floor, true);
ordinalScale.LabelFitModes = new LabelFitMode[] { LabelFitMode.Stagger2, LabelFitMode.AutoScale };
// set title to Y axis
NNumericScaleConfigurator numericScale = chart.Axis((int)StandardAxis.PrimaryY).ScaleConfigurator as NNumericScaleConfigurator;
numericScale.Title.Text = "Values";
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
// read the form control values
float customAngle;
if (!float.TryParse(CustomAngleTextBox.Text, out customAngle) || customAngle < 0 || customAngle > 360)
{
customAngle = 0f;
CustomAngleTextBox.Text = customAngle.ToString();
}
// update scale labels angle
int count = chart.Axes.Count;
NScaleLabelAngle angle = new NScaleLabelAngle((ScaleLabelAngleMode)Enum.Parse(typeof(ScaleLabelAngleMode), AngleModeDropDownList.SelectedItem.Value),
customAngle,
AllowFlipCheckBox.Checked);
// update the x axis
NAxis axis = (NAxis)chart.Axes[(int)StandardAxis.PrimaryX];
NStandardScaleConfigurator scale = axis.ScaleConfigurator as NStandardScaleConfigurator;
scale.LabelStyle.Angle = angle;
// update the depth axis
axis = (NAxis)chart.Axes[(int)StandardAxis.Depth];
scale = axis.ScaleConfigurator as NStandardScaleConfigurator;
scale.LabelStyle.Angle = angle;
}
protected void Page_Load(object sender, EventArgs e)
{
NThinChartControl1.StateId = "Chart1";
if (!NThinChartControl1.Initialized)
{
// enable jittering (full scene antialiasing)
NThinChartControl1.Settings.JitterMode = JitterMode.Enabled;
NThinChartControl1.ServerSettings.EnableTiledZoom = true;
NThinChartControl1.Panels.Clear();
// apply background image border
NImageFrameStyle frame = new NImageFrameStyle();
frame.Type = ImageFrameType.Raised;
frame.BackgroundColor = Color.White;
frame.BorderStyle.Color = Color.Gainsboro;
NThinChartControl1.BackgroundStyle.FrameStyle = frame;
NThinChartControl1.BackgroundStyle.FillStyle = new NGradientFillStyle(Color.White, Color.GhostWhite);
// set a chart title
NLabel title = new NLabel("Toolbar Configuration");
NThinChartControl1.Panels.Add(title);
title.DockMode = PanelDockMode.Top;
title.Padding = new NMarginsL(4, 6, 4, 6);
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// configure the legend
NLegend legend = new NLegend();
NThinChartControl1.Panels.Add(legend);
legend.DockMode = PanelDockMode.Right;
legend.Padding = new NMarginsL(1, 1, 3, 3);
legend.FillStyle.SetTransparencyPercent(50);
legend.OuterBottomBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
legend.OuterLeftBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
legend.OuterRightBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
legend.OuterTopBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
legend.HorizontalBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
legend.VerticalBorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
// configure the chart
NCartesianChart chart = new NCartesianChart();
NThinChartControl1.Panels.Add(chart);
chart.Enable3D = true;
chart.Fit3DAxisContent = true;
chart.DisplayOnLegend = legend;
chart.BoundsMode = BoundsMode.Fit;
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.DockMode = PanelDockMode.Fill;
chart.Padding = new NMarginsL(
new NLength(3, NRelativeUnit.ParentPercentage),
new NLength(3, NRelativeUnit.ParentPercentage),
new NLength(3, NRelativeUnit.ParentPercentage),
new NLength(3, NRelativeUnit.ParentPercentage));
chart.Wall(ChartWallType.Back).FillStyle = new NGradientFillStyle(Color.White, Color.Gray);
// setup the X axis
NAxis axisX = chart.Axis(StandardAxis.PrimaryX);
axisX.ScrollBar.Visible = true;
NOrdinalScaleConfigurator scaleX = (NOrdinalScaleConfigurator)axisX.ScaleConfigurator;
scaleX.MajorTickMode = MajorTickMode.AutoMaxCount;
scaleX.AutoLabels = false;
// add interlaced stripe for the Y axis
NAxis axisY = chart.Axis(StandardAxis.PrimaryY);
axisY.ScrollBar.Visible = true;
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)axisY.ScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back, ChartWallType.Left };
scaleY.StripStyles.Add(stripStyle);
// hide the depth axis
chart.Axis(StandardAxis.Depth).Visible = false;
// add a bar series and fill it with data
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.Name = "Simple Bar Chart";
bar.BarShape = BarShape.SmoothEdgeBar;
bar.Legend.Mode = SeriesLegendMode.DataPoints;
bar.Legend.TextStyle.FontStyle.EmSize = new NLength(8, NGraphicsUnit.Point);
bar.DataLabelStyle.Visible = false;
AddDataPoint(scaleX, bar, 16, "Spain", @"http://en.wikipedia.org/wiki/Spain");
AddDataPoint(scaleX, bar, 42, "France", @"http://en.wikipedia.org/wiki/France");
AddDataPoint(scaleX, bar, 56, "Germany", @"http://en.wikipedia.org/wiki/Germany");
AddDataPoint(scaleX, bar, 23, "Italy", @"http://en.wikipedia.org/wiki/Italy");
AddDataPoint(scaleX, bar, 47, "UK", @"http://en.wikipedia.org/wiki/UK");
AddDataPoint(scaleX, bar, 38, "Sweden", @"http://en.wikipedia.org/wiki/Sweden");
// add the index of the bar to highlight
NThinChartControl1.CustomData = 0;
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.FreshMultiColor);
styleSheet.Apply(bar);
// configure toolbar
NThinChartControl1.Toolbar.Visible = true;
NThinChartControl1.Controller.SetActivePanel(chart);
NThinChartControl1.AutoUpdateCallback = new NAutoUpdateCallback();
//NThinChartControl1.Controller.EnableAutoUpdate = true;
NTrackballTool tbt = new NTrackballTool();
tbt.Exclusive = true;
tbt.Enabled = true;
NThinChartControl1.Controller.Tools.Add(tbt);
// add a data zoom tool
NDataZoomTool dataZoomTool = new NDataZoomTool();
dataZoomTool.Exclusive = true;
dataZoomTool.Enabled = false;
NThinChartControl1.Controller.Tools.Add(dataZoomTool);
// add a data pan tool
NDataPanTool dataPanTool = new NDataPanTool();
dataPanTool.Exclusive = true;
dataPanTool.Enabled = false;
NThinChartControl1.Controller.Tools.Add(dataPanTool);
// add a tooltip tool
NThinChartControl1.Controller.Tools.Add(new NTooltipTool());
// add a cursor change tool
NThinChartControl1.Controller.Tools.Add(new NCursorTool());
// add a browser redirect tool
NThinChartControl1.Controller.Tools.Add(new NBrowserRedirectTool());
NThinChartControl1.Toolbar.Visible = true;
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NSaveStateAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NSaveImageAction("Save as PDF", new NPdfImageFormat(), true, new NSize(), 300)));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NSaveImageAction("Save as SVG", new NSvgImageFormat(), true, new NSize(), 96)));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NSaveImageAction("Save as XAML", new NXamlImageFormat(), true, new NSize(), 96)));
NSaveImageAction sia = new NSaveImageAction("Bitmap.bmp", new NBitmapImageFormat(), true, new NSize(), 96);
sia.Tooltip = "Print or Save as Bitmap";
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(sia));
NThinChartControl1.Toolbar.Items.Add(new NToolbarSeparator());
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NTogglePanelSelectorToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleDataZoomToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleDataPanToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleTrackballToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarSeparator());
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleAutoUpdateAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleChart3DAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleChartLightingAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarSeparator());
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleTooltipToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleBrowserRedirectToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new NToggleCursorToolAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarSeparator());
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new ShowDataLabelsAction()));
NThinChartControl1.Toolbar.Items.Add(new NToolbarButton(new HideDataLabelsAction()));
NThinChartControl1.CustomRequestCallback = new CustomRequestCallback();
}
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Stick Stock Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
title.TextStyle.FillStyle = new NColorFillStyle(GreyBlue);
// no legend
nChartControl1.Legends.Clear();
// setup chart
NChart chart = nChartControl1.Charts[0];
// setup X axis
NValueTimelineScaleConfigurator scaleX = new NValueTimelineScaleConfigurator();
scaleX.FirstRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.FirstRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(225, 225, 225));
scaleX.FirstRow.UseGridStyle = true;
scaleX.FirstRow.InnerTickStyle.Visible = false;
scaleX.SecondRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.SecondRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(215, 215, 215));
scaleX.SecondRow.UseGridStyle = true;
scaleX.SecondRow.InnerTickStyle.Visible = false;
scaleX.ThirdRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.ThirdRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(205, 205, 205));
scaleX.ThirdRow.UseGridStyle = true;
scaleX.ThirdRow.InnerTickStyle.Visible = false;
// calendar
NWeekDayRule wdr = new NWeekDayRule(WeekDayBit.All);
wdr.Saturday = false;
wdr.Sunday = false;
scaleX.Calendar.Rules.Add(wdr);
scaleX.EnableCalendar = true;
// set configurator
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = scaleX;
// setup Y axis
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
scaleY.OuterMajorTickStyle.Length = new NLength(3, NGraphicsUnit.Point);
scaleY.InnerMajorTickStyle.Visible = false;
NFillStyle stripFill = new NColorFillStyle(Color.FromArgb(234, 233, 237));
NScaleStripStyle stripStyle = new NScaleStripStyle(stripFill, null, true, 1, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
stripStyle.Interlaced = true;
scaleY.StripStyles.Add(stripStyle);
// add a stock series
m_Stock = (NStockSeries)chart.Series.Add(SeriesType.Stock);
m_Stock.CandleStyle = CandleStyle.Stick;
m_Stock.DataLabelStyle.Visible = false;
m_Stock.UpStrokeStyle.Width = new NLength(1, NGraphicsUnit.Point);
m_Stock.UpStrokeStyle.Color = Color.Black;
m_Stock.DownStrokeStyle.Width = new NLength(1, NGraphicsUnit.Point);
m_Stock.DownStrokeStyle.Color = Color.Crimson;
m_Stock.CandleWidth = new NLength(1.3f, NRelativeUnit.ParentPercentage);
m_Stock.UseXValues = true;
m_Stock.InflateMargins = true;
// add some stock items
const int count = 50;
GenerateOHLCData(m_Stock, 100.0, count, new NRange1DD(60, 140));
FillStockDates(m_Stock, count);
// apply layout
ConfigureStandardLayout(chart, title, null);
// init form controls
ShowHighLowCheckBox.IsChecked = true;
ShowOpenCheckBox.IsChecked = true;
ShowCloseCheckBox.IsChecked = true;
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("XYZ Error Bar");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
title.TextStyle.FillStyle = new NColorFillStyle(GreyBlue);
// remove the legend
nChartControl1.Legends.Clear();
// setup chart
m_Chart = nChartControl1.Charts[0];
m_Chart.Enable3D = true;
m_Chart.Projection.SetPredefinedProjection(PredefinedProjection.PerspectiveTilted);
m_Chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
m_Chart.BoundsMode = BoundsMode.Fit;
m_Chart.ContentAlignment = ContentAlignment.BottomRight;
m_Chart.Location = new NPointL(new NLength(8, NRelativeUnit.ParentPercentage), new NLength(8, NRelativeUnit.ParentPercentage));
m_Chart.Size = new NSizeL(new NLength(84, NRelativeUnit.ParentPercentage), new NLength(84, NRelativeUnit.ParentPercentage));
m_Chart.Depth = 55.0f;
m_Chart.Width = 55.0f;
m_Chart.Height = 55.0f;
// setup the x axis
NLinearScaleConfigurator linearScale = new NLinearScaleConfigurator();
m_Chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = linearScale;
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Floor, true);
// setup the y axis
linearScale = new NLinearScaleConfigurator();
m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = linearScale;
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// setup the z axis
linearScale = new NLinearScaleConfigurator();
m_Chart.Axis(StandardAxis.Depth).ScaleConfigurator = linearScale;
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Floor, true);
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Left, true);
// add an error bar series
NErrorBarSeries series = (NErrorBarSeries)m_Chart.Series.Add(SeriesType.ErrorBar);
series.DataLabelStyle.Visible = false;
series.BorderStyle = new NStrokeStyle(GreyBlue);
series.MarkerStyle.Visible = true;
series.MarkerStyle.AutoDepth = false;
series.MarkerStyle.FillStyle = new NColorFillStyle(DarkOrange);
series.MarkerStyle.BorderStyle = new NStrokeStyle(GreyBlue);
series.MarkerStyle.Width = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.MarkerStyle.Height = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.MarkerStyle.Depth = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.UseXValues = true;
series.UseZValues = true;
series.ShowLowerErrorX = true;
series.ShowLowerErrorY = true;
series.ShowLowerErrorZ = true;
series.ShowUpperErrorX = true;
series.ShowUpperErrorY = true;
series.ShowUpperErrorZ = true;
GenerateData(series);
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NTrackballTool());
// apply layout
ConfigureStandardLayout(m_Chart, title, null);
}
public override void Initialize()
{
base.Initialize();
nChartControl1.Panels.Clear();
// set a chart title
NLabel title = new NLabel("Animation Themes");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
title.DockMode = PanelDockMode.Top;
title.Margins = new NMarginsL(0, 10, 0, 0);
nChartControl1.Panels.Add(title);
NDockPanel contentPanel = new NDockPanel();
nChartControl1.Panels.Add(contentPanel);
contentPanel.DockMode = PanelDockMode.Fill;
// configure the chart
NCartesianChart chart = new NCartesianChart();
contentPanel.ChildPanels.Add(chart);
chart.Location = new NPointL(0, 0);
chart.Size = new NSizeL(new NLength(100, NRelativeUnit.ParentPercentage),
new NLength(60, NRelativeUnit.ParentPercentage));
chart.Enable3D = false;
chart.Axis(StandardAxis.Depth).Visible = false;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.BrightCameraLight);
chart.Margins = new NMarginsL(10, 10, 10, 10);
chart.BoundsMode = BoundsMode.Stretch;
chart.DockMode = PanelDockMode.Top;
// configure the legend
NLegend legend = new NLegend();
chart.ChildPanels.Add(legend);
chart.DisplayOnLegend = legend;
chart.PositionChildPanelsInContentBounds = true;
legend.DockMode = PanelDockMode.Top;
legend.FitAlignment = ContentAlignment.BottomRight;
legend.Location = new NPointL(new NLength(100, NRelativeUnit.ParentPercentage), new NLength(0));
legend.Margins = new NMarginsL(0, 5, 5, 0);
legend.OuterLeftBorderStyle.Width = new NLength(0);
legend.OuterRightBorderStyle.Width = new NLength(0);
legend.OuterTopBorderStyle.Width = new NLength(0);
legend.OuterBottomBorderStyle.Width = new NLength(0);
legend.VerticalBorderStyle.Width = new NLength(0);
legend.FillStyle.SetTransparencyPercent(50);
// configure axes
NOrdinalScaleConfigurator ordinalScale = chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.Labels.Add("2004");
ordinalScale.Labels.Add("2005");
ordinalScale.Labels.Add("2006");
ordinalScale.Labels.Add("2007");
ordinalScale.Labels.Add("2008");
ordinalScale.Labels.Add("2009");
// add interlace stripe
NLinearScaleConfigurator linearScale = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
linearScale.Title.Text = "Sales in Thousands USD";
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
NDockPanel gaugesPanel = new NDockPanel();
gaugesPanel.DockMode = PanelDockMode.Fill;
gaugesPanel.Margins = new NMarginsL(20, 0, 10, 0);
gaugesPanel.PositionChildPanelsInContentBounds = true;
contentPanel.ChildPanels.Add(gaugesPanel);
string[] companyNames = new string[] { "Company A", "Company B", "Company C" };
for (int i = 0; i < 3; i++)
{
NDockPanel gaugeContainer = new NDockPanel();
gaugeContainer.Location = new NPointL(new NLength(i * 35, NRelativeUnit.ParentPercentage),
new NLength(0));
gaugeContainer.Size = new NSizeL(new NLength(30, NRelativeUnit.ParentPercentage),
new NLength(100, NRelativeUnit.ParentPercentage));
gaugeContainer.ChildPanels.Add(CreateGaugeLabel(companyNames[i]));
gaugeContainer.ChildPanels.Add(CreateGauge());
gaugesPanel.ChildPanels.Add(gaugeContainer);
}
// init form controls
ChartTypeCombo.Items.Add("Bar");
ChartTypeCombo.Items.Add("Line");
ChartTypeCombo.Items.Add("Area");
ChartTypeCombo.SelectedIndex = 0;
AggregationComboBox.Items.Add("None");
AggregationComboBox.Items.Add("Stacked");
AggregationComboBox.Items.Add("Clustered");
AggregationComboBox.SelectedIndex = 1;
AnimationThemeTypeComboBox.FillFromEnum(typeof(AnimationThemeType));
AnimationThemeTypeComboBox.SelectedIndex = (int)AnimationThemeType.ScaleAndFade;
AxesAnimationDurationUpDown.Value = (decimal)3;
WallsAnimationDurationUpDown.Value = (decimal)3;
SeriesAnimationDurationUpDown.Value = (decimal)3;
IndicatorsAnimationDurationUpDown.Value = (decimal)3;
GenerateNewDataButton_Click(null, null);
CalculateIndicatorValues();
}
public override void Initialize()
{
base.Initialize();
// confgigure chart
nChartControl1.Panels.Clear();
// set a chart title
NLabel header = new NLabel("Legend Horizontal and Vertical Wrapping");
header.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
header.TextStyle.FillStyle = new NColorFillStyle(GreyBlue);
header.DockMode = PanelDockMode.Top;
header.Margins = new NMarginsL(0, 10, 0, 10);
nChartControl1.Panels.Add(header);
NDockPanel container = new NDockPanel();
container.DockMode = PanelDockMode.Fill;
container.Margins = new NMarginsL(10, 10, 10, 10);
container.PositionChildPanelsInContentBounds = true;
nChartControl1.Panels.Add(container);
// configure the legend
m_Legend = new NLegend();
m_Legend.Data.ExpandMode = LegendExpandMode.HorzWrap;
m_Legend.Location = new NPointL(new NLength(80, NRelativeUnit.ParentPercentage), new NLength(0));
m_Legend.BoundsMode = BoundsMode.None;
m_Legend.Size = new NSizeL(new NLength(20, NRelativeUnit.ParentPercentage), new NLength(100, NRelativeUnit.ParentPercentage));
m_Legend.UseAutomaticSize = false;
container.ChildPanels.Add(m_Legend);
// configure the chart
m_Chart = new NCartesianChart();
container.ChildPanels.Add(m_Chart);
m_Chart.BoundsMode = BoundsMode.Stretch;
m_Chart.Margins = new NMarginsL(0, 0, 10, 0);
m_Chart.Location = new NPointL(new NLength(0), new NLength(0));
m_Chart.Size = new NSizeL(new NLength(80, NRelativeUnit.ParentPercentage), new NLength(100, NRelativeUnit.ParentPercentage));
m_Chart.DisplayOnLegend = m_Legend;
m_Chart.Axis(StandardAxis.Depth).Visible = false;
m_Chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
m_Chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.BrightCameraLight);
// add interlace stripe
NLinearScaleConfigurator linearScale = m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// add the first bar
m_Bar1 = (NBarSeries)m_Chart.Series.Add(SeriesType.Bar);
m_Bar1.Name = "Bar1";
m_Bar1.MultiBarMode = MultiBarMode.Series;
m_Bar1.Legend.Mode = SeriesLegendMode.DataPoints;
m_Bar1.DataLabelStyle.Visible = false;
// add the second bar
m_Bar2 = (NBarSeries)m_Chart.Series.Add(SeriesType.Bar);
m_Bar2.Name = "Bar2";
m_Bar2.MultiBarMode = MultiBarMode.Stacked;
m_Bar2.Legend.Mode = SeriesLegendMode.DataPoints;
m_Bar2.DataLabelStyle.Visible = false;
// add the third bar
m_Bar3 = (NBarSeries)m_Chart.Series.Add(SeriesType.Bar);
m_Bar3.Name = "Bar3";
m_Bar3.Legend.Mode = SeriesLegendMode.DataPoints;
m_Bar3.DataLabelStyle.Visible = false;
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
string[] names = Enum.GetNames(typeof(ContentAlignment));
for (int i = 0; i < names.Length; i++)
{
FitAlignmentComboBox.Items.Add(names[i]);
}
FitAlignmentComboBox.SelectedItem = ContentAlignment.TopCenter.ToString();
LegendWidthNumericUpDown.Value = 30;
DataPointsPerSeriesNumericUpDown.Value = 10;
HorzWrapRadioButton.Checked = true;
DataPointsPerSeriesNumericUpDown_ValueChanged(null, null);
}
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
WebExamplesUtilities.FillComboWithValues(LABeginValueDropDownList, 0, 100, 10);
WebExamplesUtilities.FillComboWithValues(LAEndValueDropDownList, 0, 100, 10);
WebExamplesUtilities.FillComboWithValues(BABeginValueDropDownList, 0, 100, 10);
WebExamplesUtilities.FillComboWithValues(BAEndValueDropDownList, 0, 100, 10);
// init form controls
LABeginValueDropDownList.SelectedIndex = 2;
LAEndValueDropDownList.SelectedIndex = 6;
BABeginValueDropDownList.SelectedIndex = 2;
BAEndValueDropDownList.SelectedIndex = 6;
// init the form controls
WebExamplesUtilities.FillComboWithEnumNames(LAContentAlignmentDropDownList, typeof(ContentAlignment));
LAContentAlignmentDropDownList.SelectedIndex = 0;
LATextTextBox.Text = "Left Axis Line Text";
WebExamplesUtilities.FillComboWithEnumNames(BAContentAlignmentDropDownList, typeof(ContentAlignment));
BAContentAlignmentDropDownList.SelectedIndex = 0;
BATextTextBox.Text = "Bottom Axis Line Text";
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Axis Stripe Labels");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
NChart chart = nChartControl1.Charts[0];
// disable the depth axis
chart.Axis(StandardAxis.Depth).Visible = false;
NLinearScaleConfigurator linearScale = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = new NLinearScaleConfigurator();
// Add stripes for the left and the bottom axes
NAxisStripe stripeY = chart.Axis(StandardAxis.PrimaryY).Stripes.Add(2, 3);
NAxisStripe stripeX = chart.Axis(StandardAxis.PrimaryX).Stripes.Add(2, 3);
stripeY.FillStyle = new NColorFillStyle(Color.FromArgb(50, Color.Blue));
stripeY.From = LABeginValueDropDownList.SelectedIndex * 10;
stripeY.To = LAEndValueDropDownList.SelectedIndex * 10;
stripeY.SetShowAtWall(ChartWallType.Back, true);
stripeY.TextAlignment = (ContentAlignment)Enum.Parse(typeof(ContentAlignment), LAContentAlignmentDropDownList.SelectedItem.Text);
stripeY.Text = LATextTextBox.Text;
stripeX.FillStyle = new NColorFillStyle(Color.FromArgb(50, Color.Blue));
stripeX.From = BABeginValueDropDownList.SelectedIndex * 10;
stripeX.To = BAEndValueDropDownList.SelectedIndex * 10;
stripeX.SetShowAtWall(ChartWallType.Back, true);
stripeX.TextAlignment = (ContentAlignment)Enum.Parse(typeof(ContentAlignment), BAContentAlignmentDropDownList.SelectedItem.Text);
stripeX.Text = BATextTextBox.Text;
// Create a point series
NPointSeries pnt = (NPointSeries)chart.Series.Add(SeriesType.Point);
pnt.InflateMargins = true;
pnt.UseXValues = true;
pnt.Name = "Series 1";
pnt.DataLabelStyle.Visible = false;
// Add some data
pnt.Values.Add(31);
pnt.Values.Add(67);
pnt.Values.Add(12);
pnt.Values.Add(84);
pnt.Values.Add(90);
pnt.XValues.Add(10);
pnt.XValues.Add(36);
pnt.XValues.Add(52);
pnt.XValues.Add(62);
pnt.XValues.Add(88);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
protected void Page_Load(object sender, EventArgs e)
{
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Axis View Range");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
title.Margins = new NMarginsL(10, 10, 10, 10);
title.DockMode = PanelDockMode.Top;
// turn off the legend
nChartControl1.Legends[0].Mode = LegendMode.Disabled;
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.DockMode = PanelDockMode.Fill;
chart.Margins = new NMarginsL(10, 0, 10, 10);
// apply predefined lighting and projection
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
// add interlace stripe
NLinearScaleConfigurator linearScale = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// setup a bar series
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.Name = "Bar Series";
bar.BorderStyle.Width = new NLength(0, NGraphicsUnit.Pixel);
bar.ShadowStyle.Type = ShadowType.GaussianBlur;
bar.ShadowStyle.Offset = new NPointL(2, 2);
bar.ShadowStyle.Color = Color.FromArgb(80, 0, 0, 0);
bar.ShadowStyle.FadeLength = new NLength(5);
bar.HasBottomEdge = false;
// add some data to the bar series
bar.AddDataPoint(new NDataPoint(18, "Silverlight"));
bar.AddDataPoint(new NDataPoint(15, "Ajax"));
bar.AddDataPoint(new NDataPoint(21, "JackBe"));
bar.AddDataPoint(new NDataPoint(23, "Laszlo"));
bar.AddDataPoint(new NDataPoint(28, "Java FX"));
bar.AddDataPoint(new NDataPoint(29, "Flex"));
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.BrightMultiColor);
styleSheet.Apply(nChartControl1.Document.Charts[0]);
if (CustomViewRangeCheckBox.Checked)
{
// specify custom view range
chart.Axis(StandardAxis.PrimaryY).View = new NRangeAxisView(new NRange1DD(14, 30), true, true);
}
else
{
chart.Axis(StandardAxis.PrimaryY).View = new NContentAxisView();
}
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
NChart chart = nChartControl1.Charts[0];
nChartControl1.Controller.Selection.Add(chart);
nChartControl1.Controller.Tools.Add(new NTrackballTool());
// set a chart title
NLabel title = new NLabel("XY Smooth Line");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
// no legend
nChartControl1.Legends.Clear();
// configure the chart
chart.Enable3D = true;
chart.Width = 70;
chart.Height = 70;
chart.Depth = 15;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
// configure axes
chart.Axis(StandardAxis.Depth).Visible = false;
NLinearScaleConfigurator linearScale = new NLinearScaleConfigurator();
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = linearScale;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Floor, true);
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale = new NLinearScaleConfigurator();
chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = linearScale;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
// add interlaced stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// add the line
NSmoothLineSeries line = (NSmoothLineSeries)chart.Series.Add(SeriesType.SmoothLine);
line.Name = "Smooth Line";
line.InflateMargins = true;
line.Legend.Mode = SeriesLegendMode.Series;
line.DataLabelStyle.Visible = false;
line.MarkerStyle.Visible = true;
line.MarkerStyle.PointShape = PointShape.Cylinder;
line.MarkerStyle.AutoDepth = false;
line.MarkerStyle.Width = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Height = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Depth = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.UseXValues = true;
line.UseZValues = false;
line.Use1DInterpolationForXYScatter = false;
ChangeData();
// apply layout
ConfigureStandardLayout(chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
}
protected void Page_Load(object sender, System.EventArgs e)
{
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Custom Series");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// no legend
nChartControl1.Legends.Clear();
// setup chart
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
// setup Y axis
NAxis axisY = chart.Axis(StandardAxis.PrimaryY);
NLinearScaleConfigurator linearScaleConfigurator = (NLinearScaleConfigurator)axisY.ScaleConfigurator;
linearScaleConfigurator.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
// add interlaced stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScaleConfigurator.StripStyles.Add(stripStyle);
// configure X axis
NLinearScaleConfigurator linearScale = new NLinearScaleConfigurator();
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = linearScale;
// add a custom series and set its callback object
NCustomSeries customSeries = new NCustomSeries();
chart.Series.Add(customSeries);
// create a paint callback object for the custom series
MyCustomBezierSeries callback = new MyCustomBezierSeries(chart, customSeries);
customSeries.Callback = callback;
callback.Points = new NPointF[]
{
new NPointF(10, 20),
new NPointF(55, 60),
new NPointF(65, 180),
new NPointF(110, 102),
new NPointF(150, 99),
new NPointF(225, 180),
new NPointF(190, 202),
new NPointF(160, 221),
new NPointF(230, 45),
new NPointF(200, 21),
};
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = new NLabel("Real Time Stock");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
nChartControl1.Panels.Add(title);
m_Chart = (NCartesianChart)nChartControl1.Charts[0];
m_Chart.BoundsMode = BoundsMode.Stretch;
// add interlace stripes
NLinearScaleConfigurator linearScale = m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
linearScale.StripStyles.Add(stripStyle);
m_Chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = new NRangeTimelineScaleConfigurator();
// enable range selection
NRangeSelection rangeSelection = new NRangeSelection();
rangeSelection.VerticalValueSnapper = new NAxisRulerMinMaxSnapper();
m_Chart.RangeSelections.Add(rangeSelection);
// enable zooming and scrolling
m_Chart.Axis(StandardAxis.PrimaryX).ScrollBar.Visible = true;
m_Chart.Axis(StandardAxis.PrimaryX).PagingView = new NDateTimeAxisPagingView();
m_LineSMA = new NLineSeries();
// create a line series for the simple moving average
m_Chart.Series.Add(m_LineSMA);
m_LineSMA.Name = "SMA(20)";
m_LineSMA.DataLabelStyle.Visible = false;
m_LineSMA.BorderStyle.Color = Color.DarkOrange;
m_LineSMA.UseXValues = true;
// create the stock series
m_Stock = new NStockSeries();
m_Chart.Series.Add(m_Stock);
m_Stock.DisplayOnAxis(StandardAxis.PrimaryX, true);
m_Stock.Name = "Stock Data";
m_Stock.Legend.Mode = SeriesLegendMode.None;
m_Stock.DataLabelStyle.Visible = false;
m_Stock.CandleStyle = CandleStyle.Bar;
m_Stock.CandleWidth = new NLength(0.8f, NRelativeUnit.ParentPercentage);
m_Stock.InflateMargins = true;
m_Stock.UseXValues = true;
m_Stock.UpFillStyle = new NColorFillStyle(LightGreen);
m_Stock.UpStrokeStyle.Color = Color.Black;
m_Stock.DownFillStyle = new NColorFillStyle(Red);
m_Stock.DownStrokeStyle.Color = Color.Black;
m_Stock.OpenValues.Name = "open";
m_Stock.CloseValues.Name = "close";
m_Stock.HighValues.Name = "high";
m_Stock.LowValues.Name = "low";
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NAxisScrollTool());
nChartControl1.Controller.Tools.Add(new NDataZoomTool());
nChartControl1.Controller.Tools.Add(new NDataPanTool());
// apply layout
ConfigureStandardLayout(m_Chart, title, null);
NumberOfDataPointsComboBox.Items.Add("1000");
NumberOfDataPointsComboBox.Items.Add("5000");
NumberOfDataPointsComboBox.Items.Add("10000");
NumberOfDataPointsComboBox.SelectedIndex = 1;
AddData();
UseHardwareAccelerationCheckBox.IsChecked = true;
nChartControl1.Settings.RenderSurface = RenderSurface.Window;
StartTimer();
}
protected void Page_Load(object sender, EventArgs e)
{
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
nChartControl1.Settings.JitterMode = JitterMode.Enabled;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Wireframe Surface");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// no legend
nChartControl1.Legends.Clear();
// setup chart
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.Width = 70.0f;
chart.Depth = 70.0f;
chart.Height = 30.0f;
chart.Projection.Type = ProjectionType.Perspective;
chart.Projection.Elevation = 28;
chart.Projection.Rotation = -18;
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.ShinyTopLeft);
if (!IsPostBack)
{
RotationTextBox.Text = chart.Projection.Rotation.ToString();
ElevationTextBox.Text = chart.Projection.Elevation.ToString();
WebExamplesUtilities.FillComboWithColorNames(LineColorDropDownList, KnownColor.Black);
WebExamplesUtilities.FillComboWithValues(LineWidhtDropDownList, 1, 5, 1);
}
else
{
chart.Projection.Rotation = (float)Convert.ToDouble(RotationTextBox.Text);
chart.Projection.Elevation = (float)Convert.ToDouble(ElevationTextBox.Text);
}
// setup Y axis
NLinearScaleConfigurator linearScaleConfigurator = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
linearScaleConfigurator.LabelStyle.TextStyle.FontStyle = new NFontStyle("Arial", 8);
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScaleConfigurator.StripStyles.Add(stripStyle);
// setup X axis
NLinearScaleConfigurator scaleX = new NLinearScaleConfigurator();
scaleX.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Floor, ChartWallType.Back };
scaleX.RoundToTickMin = false;
scaleX.RoundToTickMax = false;
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = scaleX;
// setup Z axis
NLinearScaleConfigurator scaleZ = new NLinearScaleConfigurator();
scaleZ.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Floor, ChartWallType.Left };
scaleZ.RoundToTickMin = false;
scaleZ.RoundToTickMax = false;
chart.Axis(StandardAxis.Depth).ScaleConfigurator = scaleZ;
// add the surface series
NGridSurfaceSeries surface = (NGridSurfaceSeries)chart.Series.Add(SeriesType.GridSurface);
surface.Name = "Surface";
surface.FillMode = SurfaceFillMode.None;
surface.FrameMode = SurfaceFrameMode.Mesh;
surface.Data.SetGridSize(30, 30);
surface.SyncPaletteWithAxisScale = false;
surface.PaletteSteps = 8;
surface.ValueFormatter.FormatSpecifier = "0.0";
surface.Legend.Mode = SeriesLegendMode.None;
if (PaletteFrameCheckBox.Checked)
{
surface.FrameColorMode = SurfaceFrameColorMode.Zone;
}
else
{
surface.FrameColorMode = SurfaceFrameColorMode.Uniform;
}
SmoothPaletteCheckBox.Enabled = PaletteFrameCheckBox.Checked;
if (SmoothPaletteCheckBox.Checked)
{
surface.SmoothPalette = true;
surface.Legend.Format = "<zone_value>";
}
else
{
surface.SmoothPalette = false;
surface.Legend.Format = "<zone_begin> - <zone_end>";
}
surface.FrameStrokeStyle.Color = WebExamplesUtilities.ColorFromDropDownList(LineColorDropDownList);
surface.FrameStrokeStyle.Width = new NLength(LineWidhtDropDownList.SelectedIndex + 1, NGraphicsUnit.Pixel);
FillData(surface);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("XY Error Bar");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
title.TextStyle.FillStyle = new NColorFillStyle(GreyBlue);
// remove the legend
nChartControl1.Legends.Clear();
m_Chart = nChartControl1.Charts[0];
// setup axes
NLinearScaleConfigurator linearScale = new NLinearScaleConfigurator();
linearScale.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back, ChartWallType.Floor };
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
m_Chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = linearScale;
linearScale = (NLinearScaleConfigurator)m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
linearScale.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back, ChartWallType.Left };
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
m_Chart.Axis(StandardAxis.Depth).Visible = false;
// add an error bar series
NErrorBarSeries series = (NErrorBarSeries)m_Chart.Series.Add(SeriesType.ErrorBar);
series.DataLabelStyle.Visible = false;
series.BorderStyle = new NStrokeStyle(GreyBlue);
series.MarkerStyle.Visible = true;
series.MarkerStyle.PointShape = PointShape.Ellipse;
series.MarkerStyle.AutoDepth = false;
series.MarkerStyle.FillStyle = new NColorFillStyle(DarkOrange);
series.MarkerStyle.BorderStyle = new NStrokeStyle(GreyBlue);
series.MarkerStyle.Width = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.MarkerStyle.Height = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.MarkerStyle.Depth = new NLength(1.2f, NRelativeUnit.ParentPercentage);
series.ShowLowerErrorX = true;
series.ShowUpperErrorX = true;
series.UseXValues = true;
GenerateData(series);
// apply layout
ConfigureStandardLayout(m_Chart, title, null);
// init form controls
YErrorWhiskerSizeScrollBar.Value = series.SizeY.Value / 5.0f;
ShowLowerYErrorCheckBox.IsChecked = series.ShowLowerErrorY;
ShowUpperYErrorCheckBox.IsChecked = series.ShowUpperErrorY;
XErrorWhiskerSizeScrollBar.Value = series.SizeX.Value / 5.0f;
ShowLowerXErrorCheckBox.IsChecked = series.ShowLowerErrorX;
ShowUpperXErrorCheckBox.IsChecked = series.ShowUpperErrorX;
LeftAxisRoundToTickCheckBox.IsChecked = true;
InflateMarginsCheckBox.IsChecked = true;
}
public override void Initialize()
{
base.Initialize();
nChartControl1.Panels.Clear();
// set a chart title
NLabel header = new NLabel("Company Sales by Region<br/><font size = '9pt'>Demonstrates how to use custom range labels to denote ranges on a scale</font>");
header.DockMode = PanelDockMode.Top;
header.Margins = new NMarginsL(0, 10, 0, 10);
header.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
header.TextStyle.TextFormat = TextFormat.XML;
header.ContentAlignment = ContentAlignment.BottomRight;
header.Location = new NPointL(new NLength(2, NRelativeUnit.ParentPercentage), new NLength(2, NRelativeUnit.ParentPercentage));
nChartControl1.Panels.Add(header);
NLegend legend = new NLegend();
legend.Margins = new NMarginsL(10, 0, 10, 0);
legend.DockMode = PanelDockMode.Right;
legend.FitAlignment = ContentAlignment.TopCenter;
nChartControl1.Panels.Add(legend);
NCartesianChart chart = new NCartesianChart();
nChartControl1.Panels.Add(chart);
chart.DisplayOnLegend = legend;
chart.DockMode = PanelDockMode.Fill;
chart.BoundsMode = BoundsMode.Stretch;
chart.Margins = new NMarginsL(10, 0, 0, 10);
chart.Axis(StandardAxis.Depth).Visible = false;
// add range selection
NRangeSelection rangeSelection = new NRangeSelection();
rangeSelection.VerticalValueSnapper = new NAxisRulerMinMaxSnapper();
chart.RangeSelections.Add(rangeSelection);
// add the first bar
m_Bar1 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
m_Bar1.Name = "Coca Cola";
m_Bar1.MultiBarMode = MultiBarMode.Series;
m_Bar1.DataLabelStyle.Format = "<value>";
// add the second bar
m_Bar2 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
m_Bar2.Name = "Pepsi";
m_Bar2.MultiBarMode = MultiBarMode.Clustered;
m_Bar2.DataLabelStyle.Format = "<value>";
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
// add custom labels to the X axis
NAxis xAxis = chart.Axis(StandardAxis.PrimaryX);
xAxis.ScrollBar.Visible = true;
NOrdinalScaleConfigurator ordinalScale = xAxis.ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.OuterMajorTickStyle.Visible = false;
ordinalScale.InnerMajorTickStyle.Visible = false;
// add custom labels to the Y axis
chart.Axis(StandardAxis.PrimaryY).View = new NRangeAxisView(new NRange1DD(0, 320));
NLinearScaleConfigurator linearScale = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
linearScale.RoundToTickMax = false;
NCustomRangeLabel rangeLabel = new NCustomRangeLabel(new NRange1DD(240, 320), "Target Volume");
rangeLabel.Style.TickMode = RangeLabelTickMode.Center;
rangeLabel.Style.WrapText = true;
rangeLabel.Style.Angle = new NScaleLabelAngle(ScaleLabelAngleMode.Scale, 0);
linearScale.CustomLabels.Add(rangeLabel);
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// configure interactivity
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NAxisScrollTool());
nChartControl1.Controller.Tools.Add(new NDataZoomTool());
// init form controls
LabelTickModeComboBox.FillFromEnum(typeof(RangeLabelTickMode));
LabelVisibilityModeComboBox.FillFromEnum(typeof(ScaleLabelVisibilityMode));
LabelFitModeComboBox.FillFromEnum(typeof(RangeLabelFitMode));
NRangeScaleLabelStyle defaultStyle = new NRangeScaleLabelStyle();
LabelTickModeComboBox.SelectedIndex = (int)defaultStyle.TickMode;
LabelVisibilityModeComboBox.SelectedIndex = (int)defaultStyle.VisibilityMode;
LabelFitModeComboBox.SelectedIndex = (int)defaultStyle.FitMode;
LabelAngleNumericUpDown.Value = (decimal)defaultStyle.Angle.CustomAngle;
TickPaddingNumericUpDown.Value = (decimal)defaultStyle.TickPadding.Value;
TickOffsetNumericUpDown.Value = (decimal)defaultStyle.TickOffset.Value;
TextOffsetNumericUpDown.Value = (decimal)defaultStyle.Offset.Value;
TextPaddingNumericUpDown.Value = (decimal)defaultStyle.TextPadding.Value;
// add some data
NorthAmericaCheckBox.Checked = true;
EuropeCheckBox.Checked = true;
AsiaCheckBox.Checked = true;
SouthAmericaCheckBox.Checked = true;
}
public override void Initialize()
{
base.Initialize();
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("XY Smooth Area");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
// no legends
nChartControl1.Legends.Clear();
// setup chart
m_Chart = nChartControl1.Charts[0];
m_Chart.Enable3D = true;
m_Chart.Width = 65;
m_Chart.Height = 40;
m_Chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective);
m_Chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
m_Chart.Axis(StandardAxis.Depth).Visible = false;
// setup axes
NLinearScaleConfigurator linearScaleX = new NLinearScaleConfigurator();
m_Chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = linearScaleX;
NLinearScaleConfigurator linearScaleY = (NLinearScaleConfigurator)m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
linearScaleY.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScaleY.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
// add interlaced stripe
NLinearScaleConfigurator linearScale = m_Chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScaleY.StripStyles.Add(stripStyle);
// add the area series
m_SmoothArea = new NSmoothAreaSeries();
m_Chart.Series.Add(m_SmoothArea);
m_SmoothArea.DataLabelStyle.Visible = false;
m_SmoothArea.MarkerStyle.Visible = false;
m_SmoothArea.UseXValues = true;
NPalette palette = new NPalette();
palette.Clear();
palette.Mode = PaletteMode.Custom;
palette.Add(0, Color.Green);
palette.Add(5, Color.Yellow);
palette.Add(10, Color.Red);
m_SmoothArea.Palette = palette;
GenerateYValues(nValuesCount);
GenerateXValues(nValuesCount);
// apply layout
ConfigureStandardLayout(m_Chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
SmoothPaletteCheckBox.Checked = true;
Enable3DCheckBox.Checked = true;
}
public override void Initialize()
{
base.Initialize();
// set a chart title
NLabel title = new NLabel("Gantt Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
// no legend
nChartControl1.Legends.Clear();
// configure the chart
NCartesianChart chart = (NCartesianChart)nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
chart.SetPredefinedChartStyle(PredefinedChartStyle.HorizontalLeft);
chart.Axis(StandardAxis.Depth).Visible = false;
// setup the value axis
NRangeTimelineScaleConfigurator dateTimeScale = new NRangeTimelineScaleConfigurator();
dateTimeScale.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
// add interlaced stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
stripStyle.Interlaced = true;
dateTimeScale.StripStyles.Add(stripStyle);
chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = dateTimeScale;
chart.Axis(StandardAxis.PrimaryY).Anchor = new NDockAxisAnchor(AxisDockZone.FrontRight, true, 0, 100);
// fill data
DateTime start = DateTime.Now;
DateTime end = start + new TimeSpan(10, 0, 0, 0);
TaskCollection tasks = new TaskCollection();
tasks.Add(new Task("Write Proposal",
new DateTime(2001, 4, 1),
new DateTime(2001, 4, 5),
new uint[] { 1, 2 }));
tasks.Add(new Task("Obtain Approval",
new DateTime(2001, 4, 12),
new DateTime(2001, 9, 4),
new uint[] { 9 }));
tasks.Add(new Task("Requirements Analysis",
new DateTime(2001, 4, 9),
new DateTime(2001, 5, 5),
new uint[] { 3 }));
tasks.Add(new Task("Design Phase",
new DateTime(2001, 5, 6),
new DateTime(2001, 5, 30),
new uint[] { 4 }));
tasks.Add(new Task("Design Signoff",
new DateTime(2001, 6, 2),
new DateTime(2001, 6, 2),
new uint[] { 5 }));
tasks.Add(new Task("Alpha Implementation",
new DateTime(2001, 6, 3),
new DateTime(2001, 7, 31),
new uint[] { 6 }));
tasks.Add(new Task("Design Review",
new DateTime(2001, 8, 1),
new DateTime(2001, 8, 8),
new uint[] { 7 }));
tasks.Add(new Task("Revised Design Signoff",
new DateTime(2001, 8, 10),
new DateTime(2001, 8, 10),
new uint[] { 8 }));
tasks.Add(new Task("Beta Implementation",
new DateTime(2001, 8, 12),
new DateTime(2001, 9, 12),
new uint[] { 9 }));
tasks.Add(new Task("Testing",
new DateTime(2001, 9, 13),
new DateTime(2001, 10, 31),
new uint[] { 10 }));
tasks.Add(new Task("Final Implementation",
new DateTime(2001, 11, 1),
new DateTime(2001, 11, 15),
new uint[] { 11 }));
tasks.Add(new Task("Signoff",
new DateTime(2001, 11, 28),
new DateTime(2001, 11, 30),
new uint[] { 12 }));
tasks.ConfigureChart(chart);
// apply layout
ConfigureStandardLayout(chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.FreshMultiColor);
styleSheet.Apply(nChartControl1.Document);
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NFloatBarDragPointTool());
// init form controls
ShowGanttConnectorLinesCheckBox.Checked = true;
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader(this.Title);
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
title.ContentAlignment = ContentAlignment.BottomCenter;
title.Location = new NPointL(new NLength(50, NRelativeUnit.ParentPercentage), new NLength(2, NRelativeUnit.ParentPercentage));
// no legend
nChartControl1.Legends.Clear();
// do not update automatic legends
nChartControl1.ServiceManager.LegendUpdateService.UpdateAutoLegends();
nChartControl1.ServiceManager.LegendUpdateService.Stop();
// configure the chart
NCartesianChart chart = (NCartesianChart)nChartControl1.Charts[0];
chart.Projection.SetPredefinedProjection(PredefinedProjection.PerspectiveTilted);
chart.BoundsMode = BoundsMode.Fit;
chart.Enable3D = true;
chart.Fit3DAxisContent = false;
// make the aspect 6:1:2
chart.Width = 60;
chart.Height = 20;
chart.Depth = 20;
// configure the y axis
NAxis yAxis = chart.Axis(StandardAxis.PrimaryY);
yAxis.View = new NRangeAxisView(new NRange1DD(0, m_MaxValue));
NLinearScaleConfigurator linearScale = yAxis.ScaleConfigurator as NLinearScaleConfigurator;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
linearScale.MajorGridStyle.LineStyle.Color = Color.LightSteelBlue;
linearScale.InnerMinorTickStyle.Visible = false;
linearScale.InnerMajorTickStyle.Visible = false;
linearScale.LabelFitModes = new LabelFitMode[0];
// configure the x axis
NAxis xAxis = chart.Axis(StandardAxis.PrimaryX);
linearScale = new NLinearScaleConfigurator();
linearScale.LabelFitModes = new LabelFitMode[0];
xAxis.ScaleConfigurator = linearScale;
linearScale.RoundToTickMax = false;
linearScale.RoundToTickMin = false;
linearScale.InnerMinorTickStyle.Visible = false;
linearScale.InnerMajorTickStyle.Visible = false;
chart.Axis(StandardAxis.Depth).Visible = false;
// apply layout
ConfigureStandardLayout(chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NTrackballTool());
GridSizeXComboBox.Items.Add("10");
GridSizeXComboBox.Items.Add("50");
GridSizeXComboBox.Items.Add("100");
GridSizeYComboBox.Items.Add("10");
GridSizeYComboBox.Items.Add("50");
GridSizeYComboBox.Items.Add("100");
GridSizeXComboBox.SelectedIndex = 2;
GridSizeYComboBox.SelectedIndex = 2;
UseHardwareAccelerationCheckBox.IsChecked = true;
nChartControl1.Settings.RenderSurface = RenderSurface.Window;
StartTimer();
ConfigureStandardLayout(chart, title, null);
}
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
DefaultFormatDropDown.Items.Add("[value] [label]");
DefaultFormatDropDown.Items.Add("[index] [cumulative]");
DefaultFormatDropDown.Items.Add("[percent] [total]");
DefaultFormatDropDown.SelectedIndex = 0;
DefaultVerticalAlignDropDown.Items.Add("Center");
DefaultVerticalAlignDropDown.Items.Add("Top");
DefaultVerticalAlignDropDown.Items.Add("Bottom");
DefaultVerticalAlignDropDown.SelectedIndex = 1;
DefaultLabelVisibleCheck.Checked = true;
DefaultBackplaneVisibleCheck.Checked = true;
Label3FormatDropDown.Items.Add("Individual");
Label3FormatDropDown.Items.Add("[value] [label]");
Label3FormatDropDown.Items.Add("[index] [cumulative]");
Label3FormatDropDown.Items.Add("[percent] [total]");
Label3FormatDropDown.SelectedIndex = 0;
Label3VerticalAlignDropDown.Items.Add("Center");
Label3VerticalAlignDropDown.Items.Add("Top");
Label3VerticalAlignDropDown.Items.Add("Bottom");
Label3VerticalAlignDropDown.SelectedIndex = 1;
Label3VisibleCheck.Checked = true;
Backplane3VisibleCheck.Checked = true;
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
nChartControl1.Legends[0].Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Data Labels");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// no legend
nChartControl1.Legends.Clear();
// setup chart
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
chart.Axis(StandardAxis.Depth).Visible = false;
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.AddDataPoint(new NDataPoint(10, "Item A"));
bar.AddDataPoint(new NDataPoint(20, "Item B"));
bar.AddDataPoint(new NDataPoint(30, "Item C"));
bar.AddDataPoint(new NDataPoint(25, "Item D"));
bar.AddDataPoint(new NDataPoint(29, "Item E"));
// add interlaced stripe
NLinearScaleConfigurator linearScaleConfigurator = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScaleConfigurator.StripStyles.Add(stripStyle);
// apply style sheet
NFillStyleSheetConfigurator fillStyleSheet = new NFillStyleSheetConfigurator();
fillStyleSheet.SeriesFillTemplate = new NGradientFillStyleTemplate(GradientStyle.Horizontal, GradientVariant.Variant1);
fillStyleSheet.MultiColorSeries = true;
fillStyleSheet.Palette.SetPredefinedPalette(ChartPredefinedPalette.Nature);
NStrokeStyleSheetConfigurator strokeStyleSheet = new NStrokeStyleSheetConfigurator();
strokeStyleSheet.MultiColorSeries = true;
strokeStyleSheet.ApplyToDataLabels = false;
strokeStyleSheet.Palette.SetPredefinedPalette(ChartPredefinedPalette.Nature);
NStyleSheet styleSheet = new NStyleSheet();
fillStyleSheet.ConfigureSheet(styleSheet);
strokeStyleSheet.ConfigureSheet(styleSheet);
styleSheet.Apply(bar);
// add a different data label for data point 3
NDataLabelStyle label = new NDataLabelStyle();
label.TextStyle.FontStyle.Style = FontStyle.Bold;
label.TextStyle.FillStyle = new NColorFillStyle(Color.Crimson);
label.TextStyle.BackplaneStyle.Inflate = new NSizeL(3, 3);
label.TextStyle.BackplaneStyle.FillStyle = new NGradientFillStyle(GradientStyle.Horizontal, GradientVariant.Variant2, Color.White, Color.Lavender);
bar.DataLabelStyles[3] = label;
label.Format = WebExamplesUtilities.GetXmlFormatString(Label3FormatDropDown.SelectedItem.Text);
label.VertAlign = (VertAlign)Label3VerticalAlignDropDown.SelectedIndex;
label.Visible = Label3VisibleCheck.Checked;
label.TextStyle.BackplaneStyle.Visible = Backplane3VisibleCheck.Checked;
bar.DataLabelStyle.Format = WebExamplesUtilities.GetXmlFormatString(DefaultFormatDropDown.SelectedItem.Text);
bar.DataLabelStyle.VertAlign = (VertAlign)DefaultVerticalAlignDropDown.SelectedIndex;
bar.DataLabelStyle.Visible = DefaultLabelVisibleCheck.Checked;
bar.DataLabelStyle.TextStyle.BackplaneStyle.Visible = DefaultBackplaneVisibleCheck.Checked;
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
public override void Initialize()
{
base.Initialize();
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NTrackballTool());
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("Cluster Stack Bar Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
// configure the chart
NChart chart = nChartControl1.Charts[0];
// configure Y axis
NLinearScaleConfigurator scaleY = new NLinearScaleConfigurator();
scaleY.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
scaleY.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = scaleY;
// add interlaced stripe for Y axis
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleY.StripStyles.Add(stripStyle);
NSizeL dataPointSafeguardSize = new NSizeL(
new NLength(1.3f, NRelativeUnit.ParentPercentage),
new NLength(1.3f, NRelativeUnit.ParentPercentage));
// series 1
NBarSeries series1 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
series1.Name = "Bar 1";
series1.FillStyle = new NColorFillStyle(DarkOrange);
series1.DataLabelStyle.Visible = true;
series1.DataLabelStyle.VertAlign = VertAlign.Center;
// series 2
NBarSeries series2 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
series2.Name = "Bar 2";
series2.MultiBarMode = MultiBarMode.Stacked;
series2.FillStyle = new NColorFillStyle(LightOrange);
series2.DataLabelStyle.Visible = true;
series2.DataLabelStyle.VertAlign = VertAlign.Center;
// series 3
NBarSeries series3 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
series3.Name = "Bar 3";
series3.MultiBarMode = MultiBarMode.Clustered;
series3.FillStyle = new NColorFillStyle(LightGreen);
series3.DataLabelStyle.Visible = true;
series3.DataLabelStyle.VertAlign = VertAlign.Top;
series3.DataLabelStyle.ArrowLength = new NLength(10);
// generate random data
GenerateData(chart);
// enable initial labels positioning
chart.LabelLayout.EnableInitialPositioning = true;
// enable label adjustment
chart.LabelLayout.EnableLabelAdjustment = true;
// series 1 data points must not be overlapped
series1.LabelLayout.EnableDataPointSafeguard = true;
series1.LabelLayout.DataPointSafeguardSize = dataPointSafeguardSize;
// do not use label location proposals for series 1
series1.LabelLayout.UseLabelLocations = false;
// series 2 data points must not be overlapped
series2.LabelLayout.EnableDataPointSafeguard = true;
series2.LabelLayout.DataPointSafeguardSize = dataPointSafeguardSize;
// do not use label location proposals for series 2
series2.LabelLayout.UseLabelLocations = false;
// series 3 data points must not be overlapped
series3.LabelLayout.EnableDataPointSafeguard = true;
series3.LabelLayout.DataPointSafeguardSize = dataPointSafeguardSize;
// series 3 data labels can be placed above and below the origin point
series3.LabelLayout.UseLabelLocations = true;
series3.LabelLayout.LabelLocations = new LabelLocation[] { LabelLocation.Top, LabelLocation.Bottom };
series3.LabelLayout.InvertLocationsIfIgnored = false;
series3.LabelLayout.OutOfBoundsLocationMode = OutOfBoundsLocationMode.PushWithinBounds;
// apply layout
ConfigureStandardLayout(chart, title, nChartControl1.Legends[0]);
// init form controls
EnableInitialPositioningCheck.Checked = true;
EnableLabelAdjustmentCheck.Checked = true;
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = new NLabel("Cluster Float Bar");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.Width = 65;
chart.Height = 40;
chart.Axis(StandardAxis.Depth).Visible = false;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
// add interlaced stripe to the Y axis
NLinearScaleConfigurator scaleY = new NLinearScaleConfigurator();
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
stripStyle.Interlaced = true;
scaleY.StripStyles.Add(stripStyle);
chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = scaleY;
// setup the bar series
NBarSeries bar = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar.Name = "Bar series";
bar.DataLabelStyle.Visible = false;
bar.Values.FillRandomRange(Random, 8, 7, 15);
// setup the floatbar series
NFloatBarSeries floatbar = (NFloatBarSeries)chart.Series.Add(SeriesType.FloatBar);
floatbar.MultiFloatBarMode = MultiFloatBarMode.Clustered;
floatbar.Name = "Floatbar series";
floatbar.DataLabelStyle.Visible = false;
floatbar.AddDataPoint(new NFloatBarDataPoint(3.1, 5.2));
floatbar.AddDataPoint(new NFloatBarDataPoint(4.0, 6.1));
floatbar.AddDataPoint(new NFloatBarDataPoint(2.0, 6.4));
floatbar.AddDataPoint(new NFloatBarDataPoint(5.3, 7.3));
floatbar.AddDataPoint(new NFloatBarDataPoint(3.8, 8.4));
floatbar.AddDataPoint(new NFloatBarDataPoint(4.0, 7.7));
floatbar.AddDataPoint(new NFloatBarDataPoint(2.9, 4.1));
floatbar.AddDataPoint(new NFloatBarDataPoint(5.0, 7.2));
// apply layout
ConfigureStandardLayout(chart, title, nChartControl1.Legends[0]);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
nChartControl1.Controller.Tools.Add(new NPanelSelectorTool());
nChartControl1.Controller.Tools.Add(new NTrackballTool());
}
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
}
nChartControl1.Panels.Clear();
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = new NLabel("Flash Interactivity");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.DockMode = PanelDockMode.Top;
title.InteractivityStyle.UrlLink.Url = "http://www.apple.com";
nChartControl1.Panels.Add(title);
NDockPanel contentPanel = new NDockPanel();
nChartControl1.Panels.Add(contentPanel);
contentPanel.DockMode = PanelDockMode.Fill;
// configure the chart
NCartesianChart chart = new NCartesianChart();
contentPanel.ChildPanels.Add(chart);
chart.Location = new NPointL(0, 0);
chart.Size = new NSizeL(new NLength(100, NRelativeUnit.ParentPercentage),
new NLength(60, NRelativeUnit.ParentPercentage));
chart.Enable3D = false;
chart.Axis(StandardAxis.Depth).Visible = false;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.BrightCameraLight);
chart.Margins = new NMarginsL(5, 5, 5, 5);
chart.BoundsMode = BoundsMode.Stretch;
chart.DockMode = PanelDockMode.Fill;
// configure axes
NOrdinalScaleConfigurator ordinalScale = chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.Labels.Add("2004");
ordinalScale.Labels.Add("2005");
ordinalScale.Labels.Add("2006");
ordinalScale.Labels.Add("2007");
ordinalScale.Labels.Add("2008");
ordinalScale.Labels.Add("2009");
// add interlace stripe
NLinearScaleConfigurator linearScale = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
linearScale.Title.Text = "Sales in Thousands USD";
linearScale.MinTickDistance = new NLength(15);
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
// create series
NBarSeries bar1 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
NBarSeries bar2 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
NBarSeries bar3 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar1.MultiBarMode = MultiBarMode.Clustered;
bar2.MultiBarMode = MultiBarMode.Clustered;
bar3.MultiBarMode = MultiBarMode.Clustered;
// configure common settings
bar1.Name = "Apple";
bar2.InteractivityStyle.UrlLink.Url = "http://www.apple.com";
bar1.DataLabelStyle.Visible = false;
bar2.Name = "Nokia";
bar2.InteractivityStyle.UrlLink.Url = "http://www.nokia.com";
bar2.DataLabelStyle.Visible = false;
bar3.Name = "HTC";
bar3.InteractivityStyle.UrlLink.Url = "http://www.htc.com";
bar3.DataLabelStyle.Visible = false;
// fill with random data
bar1.Values.FillRandomRange(Random, 6, 10, 100);
bar2.Values.FillRandomRange(Random, 6, 10, 100);
bar3.Values.FillRandomRange(Random, 6, 10, 100);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
// apply animation theme
NAnimationTheme animationTheme = new NAnimationTheme();
animationTheme.AnimateSeriesSequentially = true;
animationTheme.AnimateDataPointsSequentially = false;
animationTheme.AnimateChartsSequentially = false;
animationTheme.WallsAnimationDuration = 1;
animationTheme.AxesAnimationDuration = 1;
animationTheme.SeriesAnimationDuration = 1;
animationTheme.AnimationThemeType = AnimationThemeType.ScaleAndFade;
// animationTheme.Apply(nChartControl1.Document);
NImageResponse swfResponse = new NImageResponse();
swfResponse.ImageFormat = new NSwfImageFormat();
nChartControl1.ImageAcquisitionMode = ClientSideImageAcquisitionMode.TempFile;
nChartControl1.ServerSettings.BrowserResponseSettings.DefaultResponse = swfResponse;
}
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
DataLabelFormatDropDownList.Items.Add("high");
DataLabelFormatDropDownList.Items.Add("low");
DataLabelFormatDropDownList.Items.Add("high low");
DataLabelFormatDropDownList.SelectedIndex = 0;
WebExamplesUtilities.FillComboWithEnumValues(MarkerShapeDropDownList, typeof(PointShape));
MarkerShapeDropDownList.SelectedIndex = 0;
WebExamplesUtilities.FillComboWithColorNames(HighAreaColorDropDownList, KnownColor.LightSlateGray);
WebExamplesUtilities.FillComboWithColorNames(LowAreaColorDropDownList, KnownColor.DarkOrange);
WebExamplesUtilities.FillComboWithValues(MarkerSizeDropDownList, 0, 5, 1);
MarkerSizeDropDownList.SelectedIndex = 2;
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("2D High-Low Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
// setup X axis
NOrdinalScaleConfigurator scaleX = (NOrdinalScaleConfigurator)chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator;
scaleX.DisplayDataPointsBetweenTicks = false;
// setup Y axis
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
scaleY.MajorGridStyle.LineStyle.Color = Color.LightGray;
// add interlace stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleY.StripStyles.Add(stripStyle);
NHighLowSeries highLow = (NHighLowSeries)chart.Series.Add(SeriesType.HighLow);
highLow.Name = "High-Low Series";
highLow.InflateMargins = true;
highLow.Legend.Mode = SeriesLegendMode.SeriesLogic;
highLow.MarkerStyle.FillStyle = new NColorFillStyle(Red);
highLow.DataLabelStyle.TextStyle.FontStyle.EmSize = new NLength(7);
highLow.LowValues.ValueFormatter = new NNumericValueFormatter("0.#");
highLow.HighValues.ValueFormatter = new NNumericValueFormatter("0.#");
highLow.HighFillStyle = new NColorFillStyle(WebExamplesUtilities.ColorFromDropDownList(HighAreaColorDropDownList));
highLow.LowFillStyle = new NColorFillStyle(WebExamplesUtilities.ColorFromDropDownList(LowAreaColorDropDownList));
highLow.DropLines = ShowDropLinesCheckBox.Checked;
highLow.DataLabelStyle.Visible = ShowDataLabelsCheckBox.Checked;
switch (DataLabelFormatDropDownList.SelectedIndex)
{
case 0:
highLow.DataLabelStyle.Format = "<high_value>";
break;
case 1:
highLow.DataLabelStyle.Format = "<low_value>";
break;
case 2:
highLow.DataLabelStyle.Format = "<high_value> - <low_value>";
break;
}
MarkerShapeDropDownList.Enabled = ShowMarkersCheckBox.Checked;
MarkerSizeDropDownList.Enabled = ShowMarkersCheckBox.Checked;
highLow.MarkerStyle.Visible = ShowMarkersCheckBox.Checked;
highLow.MarkerStyle.PointShape = (PointShape)MarkerShapeDropDownList.SelectedIndex;
highLow.MarkerStyle.Width = new NLength((float)MarkerSizeDropDownList.SelectedIndex, NRelativeUnit.ParentPercentage);
highLow.MarkerStyle.Height = new NLength((float)MarkerSizeDropDownList.SelectedIndex, NRelativeUnit.ParentPercentage);
GenerateData(highLow);
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, nChartControl1.Legends[0]);
}
/// <summary>
/// Called to initialize the example
/// </summary>
/// <param name="chartControl"></param>
public override void Create()
{
// set a chart title
NLabel title = new NLabel("Gantt");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, System.Drawing.FontStyle.Italic);
// no legend
nChartControl1.Legends.Clear();
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.BoundsMode = BoundsMode.Stretch;
chart.Projection.ViewerRotation = 270;
chart.Axis(StandardAxis.Depth).Visible = false;
// setup the value axis
NDateTimeScaleConfigurator dateTimeScale = new NDateTimeScaleConfigurator();
dateTimeScale.LabelValueFormatter = new NDateTimeValueFormatter(DateTimeValueFormat.Date);
dateTimeScale.MajorGridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
// add interlaced stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
stripStyle.Interlaced = true;
dateTimeScale.StripStyles.Add(stripStyle);
chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator = dateTimeScale;
chart.Axis(StandardAxis.PrimaryY).Anchor = new NDockAxisAnchor(AxisDockZone.FrontRight, true, 0, 100);
// label the X axis
NOrdinalScaleConfigurator ordinalScale = chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator as NOrdinalScaleConfigurator;
ordinalScale.AutoLabels = false;
ordinalScale.Labels.Add("Market Research");
ordinalScale.Labels.Add("Specifications");
ordinalScale.Labels.Add("Architecture");
ordinalScale.Labels.Add("Project Planning");
ordinalScale.Labels.Add("Detailed Design");
ordinalScale.Labels.Add("Development");
ordinalScale.Labels.Add("Test Plan");
ordinalScale.Labels.Add("Testing and QA");
ordinalScale.Labels.Add("Documentation");
// create a floatbar series
NFloatBarSeries floatBar = (NFloatBarSeries)chart.Series.Add(SeriesType.FloatBar);
floatBar.BeginValues.ValueFormatter = new NDateTimeValueFormatter(DateTimeValueFormat.Date);
floatBar.EndValues.ValueFormatter = new NDateTimeValueFormatter(DateTimeValueFormat.Date);
floatBar.DataLabelStyle.Visible = false;
AddDataPoint(floatBar, new DateTime(2009, 2, 2), new DateTime(2009, 2, 16));
AddDataPoint(floatBar, new DateTime(2009, 2, 16), new DateTime(2009, 3, 2));
AddDataPoint(floatBar, new DateTime(2009, 3, 2), new DateTime(2009, 3, 16));
AddDataPoint(floatBar, new DateTime(2009, 3, 9), new DateTime(2009, 3, 23));
AddDataPoint(floatBar, new DateTime(2009, 3, 16), new DateTime(2009, 3, 30));
AddDataPoint(floatBar, new DateTime(2009, 3, 23), new DateTime(2009, 4, 27));
AddDataPoint(floatBar, new DateTime(2009, 4, 13), new DateTime(2009, 4, 27));
AddDataPoint(floatBar, new DateTime(2009, 4, 20), new DateTime(2009, 5, 4));
AddDataPoint(floatBar, new DateTime(2009, 4, 27), new DateTime(2009, 5, 4));
// apply layout
ConfigureStandardLayout(chart, title, null);
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.FreshMultiColor);
styleSheet.Apply(nChartControl1.Document);
}
public NevChartUC( )
{
InitializeComponent();
// set a chart title
NLabel title = nevronChart.Labels.AddHeader("Stick Stock Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
title.TextStyle.FillStyle = new NColorFillStyle(Color.Blue);
// no legend
nevronChart.Legends.Clear();
// setup chart
chart = nevronChart.Charts[0];
// setup X axis
NValueTimelineScaleConfigurator scaleX = new NValueTimelineScaleConfigurator();
scaleX.FirstRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.FirstRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(225, 225, 225));
scaleX.FirstRow.UseGridStyle = true;
scaleX.FirstRow.InnerTickStyle.Visible = false;
scaleX.SecondRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.SecondRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(215, 215, 215));
scaleX.SecondRow.UseGridStyle = true;
scaleX.SecondRow.InnerTickStyle.Visible = false;
scaleX.ThirdRow.GridStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
scaleX.ThirdRow.GridStyle.LineStyle = new NStrokeStyle(1, Color.FromArgb(205, 205, 205));
scaleX.ThirdRow.UseGridStyle = true;
scaleX.ThirdRow.InnerTickStyle.Visible = false;
// calendar
NWeekDayRule wdr = new NWeekDayRule(WeekDayBit.All);
wdr.Saturday = false;
wdr.Sunday = false;
scaleX.Calendar.Rules.Add(wdr);
scaleX.EnableCalendar = true;
// set configurator
chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator = scaleX;
// setup Y axis
NLinearScaleConfigurator scaleY = (NLinearScaleConfigurator)chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
scaleY.OuterMajorTickStyle.Length = new NLength(3, NGraphicsUnit.Point);
scaleY.InnerMajorTickStyle.Visible = false;
NFillStyle stripFill = new NColorFillStyle(Color.FromArgb(234, 233, 237));
NScaleStripStyle stripStyle = new NScaleStripStyle(stripFill, null, true, 1, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back };
stripStyle.Interlaced = true;
scaleY.StripStyles.Add(stripStyle);
// add a stock series
m_Stock = (NStockSeries)chart.Series.Add(SeriesType.Stock);
m_Stock.CandleStyle = CandleStyle.Stick;
m_Stock.DataLabelStyle.Visible = false;
m_Stock.UpStrokeStyle.Width = new NLength(1, NGraphicsUnit.Point);
m_Stock.UpStrokeStyle.Color = Color.Black;
m_Stock.DownStrokeStyle.Width = new NLength(1, NGraphicsUnit.Point);
m_Stock.DownStrokeStyle.Color = Color.Crimson;
m_Stock.CandleWidth = new NLength(1.3f, NRelativeUnit.ParentPercentage);
m_Stock.UseXValues = true;
m_Stock.InflateMargins = true;
// apply layout
ConfigureStandardLayout(chart, title, null);
}
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
// fill the combo
LineStyleDropDownList.Items.Add("Line");
LineStyleDropDownList.Items.Add("Tape");
LineStyleDropDownList.Items.Add("Tube");
LineStyleDropDownList.Items.Add("Ellipsoid");
LineStyleDropDownList.SelectedIndex = 0;
WebExamplesUtilities.FillComboWithEnumValues(MarkerShapeDropDownList, typeof(PointShape));
MarkerShapeDropDownList.SelectedIndex = 1;
WebExamplesUtilities.FillComboWithPercents(LineDepthDropDownList, 10);
LineDepthDropDownList.SelectedIndex = 4;
WebExamplesUtilities.FillComboWithValues(LineWidthDropDownList, 0, 5, 1);
LineWidthDropDownList.SelectedIndex = 1;
WebExamplesUtilities.FillComboWithColorNames(LineColorDropDownList, KnownColor.DarkSalmon);
WebExamplesUtilities.FillComboWithColorNames(LineFillColorDropDownList, KnownColor.LightSalmon);
WebExamplesUtilities.FillComboWithValues(MarkerSizeDropDownList, 0, 10, 1);
MarkerSizeDropDownList.SelectedIndex = 2;
ShowMarkersCheckBox.Checked = true;
LeftAxisRoundToTickCheckBox.Checked = true;
}
nChartControl1.BackgroundStyle.FrameStyle.Visible = false;
nChartControl1.Settings.JitterMode = JitterMode.Enabled;
// set a chart title
NLabel title = nChartControl1.Labels.AddHeader("3D Line Chart");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 14, FontStyle.Italic);
title.TextStyle.ShadowStyle.Type = ShadowType.LinearBlur;
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective2);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
chart.Axis(StandardAxis.Depth).Visible = false;
// setup Y axis
NLinearScaleConfigurator scaleY = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
scaleY.RoundToTickMin = LeftAxisRoundToTickCheckBox.Checked;
scaleY.RoundToTickMax = LeftAxisRoundToTickCheckBox.Checked;
// add Y axis interlaced stripe
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
scaleY.StripStyles.Add(stripStyle);
// setup X axis
NOrdinalScaleConfigurator scaleX = chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator as NOrdinalScaleConfigurator;
scaleX.MajorTickMode = MajorTickMode.AutoMaxCount;
scaleX.DisplayDataPointsBetweenTicks = false;
// setup the line series
NLineSeries nLine = (NLineSeries)chart.Series.Add(SeriesType.Line);
nLine.Values.FillRandom(Random, 10);
nLine.DataLabelStyle.Visible = false;
nLine.Legend.Mode = SeriesLegendMode.DataPoints;
nLine.BorderStyle.Width = new NLength(LineWidthDropDownList.SelectedIndex, NGraphicsUnit.Pixel);
nLine.DepthPercent = LineDepthDropDownList.SelectedIndex * 10;
nLine.BorderStyle.Color = WebExamplesUtilities.ColorFromDropDownList(LineColorDropDownList);
nLine.FillStyle = new NColorFillStyle(WebExamplesUtilities.ColorFromDropDownList(LineFillColorDropDownList));
nLine.InflateMargins = InflateMarginsCheckBox.Checked;
nLine.MarkerStyle.Visible = ShowMarkersCheckBox.Checked;
bool bSimpleLine = (LineStyleDropDownList.SelectedIndex == 0);
switch (LineStyleDropDownList.SelectedIndex)
{
case 0: // simple line
nLine.LineSegmentShape = LineSegmentShape.Line;
break;
case 1: // tape
nLine.LineSegmentShape = LineSegmentShape.Tape;
break;
case 2: // tube
nLine.LineSegmentShape = LineSegmentShape.Tube;
break;
case 3: // elipsoid
nLine.LineSegmentShape = LineSegmentShape.Ellipsoid;
break;
}
LineDepthDropDownList.Enabled = !bSimpleLine;
LineFillColorDropDownList.Enabled = !bSimpleLine;
MarkerShapeDropDownList.Enabled = ShowMarkersCheckBox.Checked;
MarkerSizeDropDownList.Enabled = ShowMarkersCheckBox.Checked;
if (nLine.MarkerStyle.Visible)
{
nLine.MarkerStyle.PointShape = (PointShape)MarkerShapeDropDownList.SelectedIndex;
nLine.MarkerStyle.Height = new NLength((float)MarkerSizeDropDownList.SelectedIndex, NRelativeUnit.ParentPercentage);
nLine.MarkerStyle.Width = new NLength((float)MarkerSizeDropDownList.SelectedIndex, NRelativeUnit.ParentPercentage);
nLine.MarkerStyle.FillStyle = new NColorFillStyle(Red);
nLine.MarkerStyle.BorderStyle.Color = WebExamplesUtilities.ColorFromDropDownList(LineColorDropDownList);
}
// apply layout
ApplyLayoutTemplate(0, nChartControl1, chart, title, null);
}
public override void Initialize()
{
base.Initialize();
// set a chart title
NLabel title = new NLabel("Stack Float Bar");
title.TextStyle.FontStyle = new NFontStyle("Times New Roman", 18, FontStyle.Italic);
// configure the chart
NChart chart = nChartControl1.Charts[0];
chart.Enable3D = true;
chart.Width = 65;
chart.Height = 40;
chart.Axis(StandardAxis.Depth).Visible = false;
chart.Projection.SetPredefinedProjection(PredefinedProjection.Perspective1);
chart.LightModel.SetPredefinedLightModel(PredefinedLightModel.GlitterLeft);
// add interlaced stripe to the Y axis
NLinearScaleConfigurator scaleY = chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator as NLinearScaleConfigurator;
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.ShowAtWalls = new ChartWallType[] { ChartWallType.Back, ChartWallType.Left };
stripStyle.Interlaced = true;
scaleY.StripStyles.Add(stripStyle);
// setup the floatbar series
NFloatBarSeries floatbar = (NFloatBarSeries)chart.Series.Add(SeriesType.FloatBar);
floatbar.MultiFloatBarMode = MultiFloatBarMode.Series;
floatbar.Name = "Floatbar series";
floatbar.FillStyle = new NColorFillStyle(Color.SandyBrown);
floatbar.DataLabelStyle.Visible = false;
// setup the bar series
NBarSeries bar1 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar1.Name = "Bar series";
bar1.MultiBarMode = MultiBarMode.Stacked;
bar1.FillStyle = new NColorFillStyle(Color.Green);
bar1.DataLabelStyle.Visible = false;
// setup the bar series
NBarSeries bar2 = (NBarSeries)chart.Series.Add(SeriesType.Bar);
bar2.Name = "Bar series";
bar2.MultiBarMode = MultiBarMode.Stacked;
bar2.FillStyle = new NColorFillStyle(Color.CornflowerBlue);
bar2.DataLabelStyle.Visible = false;
GeneratePosData();
// apply layout
ConfigureStandardLayout(chart, title, nChartControl1.Legends[0]);
// init form controls
BarShapeCombo.FillFromEnum(typeof(BarShape));
BarShapeCombo.SelectedIndex = 0;
// apply style sheet
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Fresh);
styleSheet.Apply(nChartControl1.Document);
}
private void Init2dChart()
{
nChartControl2.Settings.ShapeRenderingMode = ShapeRenderingMode.HighSpeed;
nChartControl2.Legends.Clear(); // no legend
NChart chart2d = nChartControl2.Charts[0];
NSmoothLineSeries surface = null;
if (chart2d.Series.Count == 0)
{
surface = (NSmoothLineSeries)chart2d.Series.Add(SeriesType.SmoothLine);
}
else
{
surface = (NSmoothLineSeries)chart2d.Series[0];
}
chart2d.BoundsMode = BoundsMode.Stretch;
NLinearScaleConfigurator linearScale = (NLinearScaleConfigurator)chart2d.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
NSmoothLineSeries line = null;
if (chart2d.Series.Count == 0)
{
line = (NSmoothLineSeries)chart2d.Series.Add(SeriesType.SmoothLine);
}
else
{
line = (NSmoothLineSeries)chart2d.Series[0];
}
line.Name = m_map_name;
line.Legend.Mode = SeriesLegendMode.Series;
line.UseXValues = true;
line.UseZValues = false;
line.DataLabelStyle.Visible = true;
line.MarkerStyle.Visible = true;
line.MarkerStyle.PointShape = PointShape.Sphere;
line.MarkerStyle.AutoDepth = true;
line.MarkerStyle.Width = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Height = new NLength(1.4f, NRelativeUnit.ParentPercentage);
line.MarkerStyle.Depth = new NLength(1.4f, NRelativeUnit.ParentPercentage);
//line.HorizontalAxes = y_axisvalues;
surface.Name = "Surface";
//surface.Legend.Mode = SeriesLegendMode.SeriesLogic;
//surface.PositionValue = 10.0;
for (int i = 0; i < y_axisvalues.Length; i++)
{
surface.XValues.Add(y_axisvalues.GetValue(i));
}
NStyleSheet styleSheet = NStyleSheet.CreatePredefinedStyleSheet(PredefinedStyleSheet.Nevron);
styleSheet.Apply(nChartControl2.Document);
}
/*Построение 2д графика*/
public void Draw2D(bool exp)
{
int numFromPoint = numberOfPointY();
mainForm.nChartControl1.Clear();
mainForm.nChartControl1.Controller.Tools.Add(new NSelectorTool());
mainForm.nChartControl1.Controller.Tools.Add(new NTrackballTool());
var chart = (NCartesianChart) mainForm.nChartControl1.Charts[0];
mainForm.nChartControl1.Legends[0].Mode = LegendMode.Disabled;
chart.BoundsMode = BoundsMode.Stretch;
var scaleConfiguratorY1 = (NStandardScaleConfigurator) chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
var scaleConfiguratorX1 = (NStandardScaleConfigurator) chart.Axis(StandardAxis.PrimaryX).ScaleConfigurator;
scaleConfiguratorY1.Title.Text = mainForm.dgwExperiment.Columns[1].HeaderCell.Value.ToString();
scaleConfiguratorY1.Title.TextStyle = new NTextStyle(new Font("Microsoft Sans Serif", 10, FontStyle.Bold));
scaleConfiguratorY1.LabelStyle.TextStyle =
new NTextStyle(new Font("Microsoft Sans Serif", 10, FontStyle.Bold));
scaleConfiguratorX1.Title.Text = mainForm.dgwExperiment.Columns[0].HeaderCell.Value.ToString();
scaleConfiguratorX1.Title.TextStyle = new NTextStyle(new Font("Microsoft Sans Serif", 10, FontStyle.Bold));
scaleConfiguratorX1.LabelStyle.TextStyle =
new NTextStyle(new Font("Microsoft Sans Serif", 10, FontStyle.Bold));
chart.Location = new NPointL(
new NLength(10, NRelativeUnit.ParentPercentage),
new NLength(12, NRelativeUnit.ParentPercentage));
chart.Size = new NSizeL(
new NLength(80, NRelativeUnit.ParentPercentage),
new NLength(78, NRelativeUnit.ParentPercentage));
NLinearScaleConfigurator linearScale =
(NLinearScaleConfigurator) chart.Axis(StandardAxis.PrimaryY).ScaleConfigurator;
linearScale.MajorGridStyle.LineStyle.Pattern = LinePattern.Dot;
linearScale.MajorGridStyle.SetShowAtWall(ChartWallType.Back, true);
NScaleStripStyle stripStyle = new NScaleStripStyle(new NColorFillStyle(Color.Beige), null, true, 0, 0, 1, 1);
stripStyle.Interlaced = true;
stripStyle.SetShowAtWall(ChartWallType.Back, true);
stripStyle.SetShowAtWall(ChartWallType.Left, true);
linearScale.StripStyles.Add(stripStyle);
NSmoothLineSeries line = (NSmoothLineSeries) chart.Series.Add(SeriesType.SmoothLine);
line.Name = "Smooth Line";
line.InflateMargins = true;
line.Legend.Mode = SeriesLegendMode.Series;
line.UseXValues = true;
line.UseZValues = false;
line.DataLabelStyle.Visible = false;
line.MarkerStyle.Visible = false;
double firstMin = Convert.ToDouble(mainForm.graphSettings.txtFirstParamMin.Text);
double firstMax = Convert.ToDouble(mainForm.graphSettings.txtFirstParamMax.Text);
double firstStep = Convert.ToDouble(mainForm.graphSettings.txtStepChart.Text);
resultForm.dataGridView1.Columns.Clear();
int c = 0;
for (double i = firstMin; i < firstMax + firstStep; i += firstStep)
{
if (i > firstMax - firstStep)
{
i = firstMax;
}
double[] data = { i };
double yPoint = Ymath(data);
line.Values.Add(yPoint);
line.XValues.Add(i);
resultForm.dataGridView1.Columns.Add(i.ToString(), i.ToString());
resultForm.dataGridView1.Rows[0].Cells[c].Value = Math.Round(yPoint, numFromPoint).ToString().Replace(".", ",");
c++;
}
resultForm.dataGridView1.TopLeftHeaderCell.Value = "x";
resultForm.dataGridView1.Rows[0].HeaderCell.Value = "y";
if (exp)
{
mainForm.DrawExpPoints2D();
}
}