//找到复用梁
public List <string> GetItemAsync(string kval)
{
List <string> vs = new List <string>();
MxDrawSelectionSet select = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
filter.AddStringEx("TEXT,MTEXT", 5020);
select.Select2(MCAD_McSelect.mcSelectionSetAll, null, null, null, filter);
for (int i = 0; i < select.Count; i++)
{
MxDrawEntity entity = select.Item(i);
if (entity == null)
{
continue;
}
if (entity.ObjectName == "McDbText")
{
MxDrawText tx = entity as MxDrawText;
if (tx.TextString.Trim() != "" && kval.Contains(tx.TextString))
{
vs.Add(tx.handle);
}
}
}
return(vs);
}
//支座与L1最远交点共点梁线
public MxDrawLine GetXpoint(MxDrawPoint pts, MxDrawPoint pte, MxDrawPolyline seat)
{
MxDrawPoints pty = new MxDrawPoints();
MxDrawSelectionSet collect = new MxDrawSelectionSet();
for (int i = 0; i < seat.NumVerts; i++)
{
MxDrawPoint temp1 = seat.GetPointAt(i);
temp1.x = Math.Round(temp1.x, 6);
temp1.y = Math.Round(temp1.y, 6);
double angle = MathSience.GetAngle2(pts, pte);
if ((angle < 3 && angle > -2) || Math.Round(Math.Abs(angle)) == 180)//左右
{
if (Math.Round(pts.x, 6) != temp1.x && Math.Round(pte.x, 6) != temp1.x)
{
pty.Add2(temp1);
}
}
if ((angle > 80 && angle < 95) || (angle < -80 && angle > -95))//上下
{
if (Math.Round(pts.y, 6) != temp1.y && Math.Round(pte.y, 6) != temp1.y)
{
pty.Add2(temp1);
}
}
}
if (pty.Count > 1)
{
PointF ptx = MathSience.point_intersection(pts, pte, pty.Item(0), pty.Item(1));
collect.AllSelect();
for (int i = 0; i < collect.Count; i++)
{
MxDrawLine line = collect.Item(i) as MxDrawLine;
if (line == null)
{
continue;
}
if (line.ObjectName == "McDbLine")
{
MxDrawPoint t1 = line.StartPoint;
MxDrawPoint t2 = line.EndPoint;
MxDrawPoint tp = new MxDrawPoint
{
x = ptx.X,
y = ptx.Y
};
if (Math.Abs(Math.Round(t1.x) - ptx.X) < 1.5 && Math.Abs(Math.Round(t1.y) - ptx.Y) < 1.5)
{
return(line);
}
else if (Math.Abs(Math.Round(t2.x) - ptx.X) < 1.5 && Math.Abs(Math.Round(t2.y) - ptx.Y) < 1.5)
{
return(line);
}
}
}
}
return(new MxDrawLine());
}
//选择范围
private void T1007()
{
axMxDrawX1.DynWorldDraw += AxMxDrawX1_DynWorldDraw;//添加动态画框事件
axMxDrawX1.AddLayer("tkbox");
MxDrawPoint pt1 = axMxDrawX1.GetPoint(false, 0, 0, "开始坐标...") as MxDrawPoint;
if (pt1 == null)
{
return;
}
MxDrawUiPrPoint scpt = new MxDrawUiPrPoint();
scpt.message = "终点坐标...";
scpt.basePoint = pt1;
scpt.setUseBasePt(false);
var spdata = scpt.InitUserDraw("SelectRangeBox");
axMxDrawX1.SetSysVarLong("ORTHOMODE", 0);
spdata.SetPoint("BasePoint", pt1);
if (scpt.go() != MCAD_McUiPrStatus.mcOk)
{
return;
}
spdata.Draw();
//放大
axMxDrawX1.ZoomWindow(pt1.x, pt1.y, spdata.DragPoint.x, spdata.DragPoint.y);
PublicValue = new
{
Lx = pt1.x,
Ly = pt1.y,
Lz = pt1.z,
Rx = spdata.DragPoint.x,
Ry = spdata.DragPoint.y,
Rz = spdata.DragPoint.z
};
//删除选择框
MxDrawSelectionSet ss = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
filter.AddStringEx("tkbox", 8);
ss.Select(MCAD_McSelect.mcSelectionSetAll, null, null, filter);
for (int i = 0; i < ss.Count; i++)
{
axMxDrawX1.Erase(ss.Item(i).ObjectID);
}
//删掉画框的图层
MxDrawDatabase database = axMxDrawX1.GetDatabase() as MxDrawDatabase;
IMxDrawLayerTableRecord layer = database.GetLayerTable().GetAt("tkbox", false);
if (layer != null)
{
layer.Erase();
}
return;
}
//获取支座
public MxDrawPolyline GetSeatForRange(MxDrawPoint pt, MxDrawPoint spt)
{
double range1 = 2000, range2 = 300;
MxDrawSelectionSet collect = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
MxDrawLayerTable layer = (Program.MainForm.axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
MxDrawPoint start = new MxDrawPoint
{
x = pt.x + range1,
y = pt.y + range1,
z = pt.z
};
MxDrawPoint end = new MxDrawPoint
{
x = pt.x - range1,
y = pt.y - range1,
z = pt.z
};
//Program.MainForm.axMxDrawX1.DrawLine(start.x, start.y, start.x, start.y);
//Program.MainForm.axMxDrawX1.DrawLine(start.x, start.y, start.x, end.y);
//Program.MainForm.axMxDrawX1.DrawLine(start.x, end.y, end.x, end.y);
//Program.MainForm.axMxDrawX1.DrawLine(end.x, end.y, end.x, start.y);
//Program.MainForm.axMxDrawX1.DrawLine(end.x, start.y, start.x, start.y);
collect.Select(MCAD_McSelect.mcSelectionSetCrossing, start, end, filter);
MxDrawEntity entity;
//MxDrawLayerTable layer = (Program.MainForm.axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
//MxDrawLayerTableRecord dd;
for (int i = 0; i < collect.Count; i++)
{
entity = collect.Item(i);
if (entity == null)
{
continue;
}
if (entity.ObjectName == "McDbPolyline")
{
MxDrawPolyline polyline = entity as MxDrawPolyline;
MxDrawLayerTableRecord dd = layer.GetAt(entity.Layer);
if (dd.Color.colorIndex != 9)
{
MxDrawPoint st = polyline.GetStartPoint();
MxDrawPoint et = polyline.GetEndPoint();
if (st.x == et.x && st.y == et.y)
{
return(polyline);
}
}
}
}
return(new MxDrawPolyline());
}
private void AxMxDrawX1_MouseEvent1(object sender, _DMxDrawXEvents_MouseEventEvent e)
{
if (e.lType == 2 && (Control.ModifierKeys & Keys.Control) == Keys.Control)
{
MxDrawSelectionSet mxDrawSelection = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
filter.AddStringEx("HLT_BEAM_CLINE", 8);
MxDrawPoint point = new MxDrawPoint
{
x = e.dX,
y = e.dY,
};
mxDrawSelection.SelectAtPoint(point, filter);
if (mxDrawSelection.Count > 0)
{
axMxDrawX1.TwinkeEnt(mxDrawSelection.Item(0).ObjectID);
onePeaceEdit.LineID = mxDrawSelection.Item(0).handle;
}
axMxDrawX1.MouseEvent -= AxMxDrawX1_MouseEvent1;
}
}
//获取梁线
public MxDrawLine GetLineForRange(MxDrawLine et)
{
MxDrawPoint pt = et.GetStartPoint();
MxDrawPoint ept = et.GetEndPoint();
MxDrawLayerTable layer = (Program.MainForm.axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
MxDrawSelectionSet collect = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
MxDrawLine entity;
MxDrawLine result = new MxDrawLine();
double distance = 100000000;
collect.Select(MCAD_McSelect.mcSelectionSetAll, null, null, filter);
for (int i = 0; i < collect.Count; i++)
{
entity = collect.Item(i) as MxDrawLine;
if (entity == null)
{
continue;
}
MxDrawLayerTableRecord dd = layer.GetAt(entity.Layer);
if (entity.ObjectName == "McDbLine" && entity.handle != et.handle && dd.Color.colorIndex != 1)
{
//double rs1 = MathSience.pointToLineDistance(entity.GetStartPoint(), entity.GetEndPoint(), pt.x, pt.y);
//double rs2 = MathSience.pointToLineDistance(entity.GetStartPoint(), entity.GetEndPoint(), ept.x, ept.y);
double rs1 = MathSience.DistanceForPointToABLine(pt.x, pt.y, entity.GetStartPoint(), entity.GetEndPoint());
double rs2 = MathSience.DistanceForPointToABLine(ept.x, ept.y, entity.GetStartPoint(), entity.GetEndPoint());
if (rs1 <= distance)
{
distance = rs1;
result = entity;
}
if (rs2 <= distance)
{
distance = rs2;
result = entity;
}
}
}
return(result);
}
private void axMxDrawX1_MxKeyUp(object sender, AxMxDrawXLib._DMxDrawXEvents_MxKeyUpEvent e)
{
//ESC取消掉执行此功能
if (e.lVk == 27)
{
bar_state.state = false;
}
//shift切换选择
if (e.lVk == 16)
{
if (bar_state.id == 1001)
{
MxDrawSelectionSet mxDrawSelection = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
mxDrawSelection.CurrentSelect(filter);
if (mxDrawSelection.Count > 0)
{
axMxDrawX1.AddCurrentSelect(mxDrawSelection.Item(objID).ObjectID, true, true);
}
}
}
}
private void Delete_layer()
{
MxDrawSelectionSet scn = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
filter.AddStringEx("HLT_BEAM_CLINE", 8);
scn.Select(MCAD_McSelect.mcSelectionSetWindow, null, null, filter);
for (int i = 0; i < scn.Count; i++)
{
scn.Item(i).Erase();
}
// 得到数据库对象.
MxDrawDatabase database = (MxDrawDatabase)axMxDrawX1.GetDatabase();
// 得到层表.
MxDrawLayerTable layerTable = database.GetLayerTable();
// 得到层。
MxDrawLayerTableRecord layer = layerTable.GetAt("HLT_BEAM_CLINE", false);
if (layer != null)
{
layer.Erase();
}
}
//鼠标点击事件
private void axMxDrawX1_MouseEvent(object sender, AxMxDrawXLib._DMxDrawXEvents_MouseEventEvent e)
{
/*
* 事件类型,1鼠标移动，2是鼠标左键按下，3是鼠标右键按下，4是鼠标左键双击
* 5是鼠标左键释放 6是鼠标右键释放 7是鼠标中键按下 8是鼠标中键释放
* 9是鼠标中键双击 10是鼠标中键滚动
*/
switch (e.lType)
{
case 4: //左键选择元素图层--所有元素
//if(bar_state.state==true&& bar_state.id == 1001)
{
MxDrawSelectionSet mxDrawSelection = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
MxDrawPoint point = new MxDrawPoint();
point.x = e.dX; point.y = e.dY;
mxDrawSelection.SelectAtPoint(point, filter);
if (mxDrawSelection.Count > 0)
{
MxDrawEntity entity = mxDrawSelection.Item(1);
//MxDrawLayerTable layer = (axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
//MxDrawLayerTableRecord dd = layer.GetAt(entity.Layer);
if (entity.ObjectName == "McDbLine")
{
MessageBox.Show(JsonConvert.SerializeObject(new
{
handle = entity.handle,
ID = entity.ObjectID,
Line = entity.ObjectName,
B = entity.LineType,
pt1 = ((MxDrawLine)entity).GetStartPoint(),
pt2 = ((MxDrawLine)entity).GetEndPoint(),
//color=dd.Color.colorIndex
}));
}
else
{
MessageBox.Show(JsonConvert.SerializeObject(new
{
handle = entity.handle,
ID = entity.ObjectID,
Line = entity.ObjectName,
B = entity.LineType,
rotate = ((MxDrawText)entity).Rotation
//pt1 = ((MxDrawLine)entity).GetStartPoint(),
//pt2 = ((MxDrawLine)entity).GetEndPoint(),
//color=dd.Color.colorIndex
}));
}
//double c=Models.MathSience.DistanceForPointToABLine(121324.953422, 33700.002475, ((MxDrawLine)entity).GetStartPoint(),((MxDrawLine)entity).GetEndPoint());
//double c1 = Algorithm.MathSience.GetAngle(new MxDrawPoint { x = 121324.95342187915, y = 54350.00279569807 }, ((MxDrawLine)entity).GetStartPoint(), ((MxDrawLine)entity).GetEndPoint());
double c1 = Algorithm.MathSience.GetLineK(((MxDrawLine)entity).GetStartPoint(), ((MxDrawLine)entity).GetEndPoint());
MessageBox.Show(c1.ToString());
//double c = Algorithm.MathSience.GetAngle2(((MxDrawLine)entity).GetStartPoint(), ((MxDrawLine)entity).GetEndPoint());
//MxDrawLine line = axMxDrawX1.HandleToObject("61FCB") as MxDrawLine;
//PointF point1 = Algorithm.MathSience.point_intersection(line.GetStartPoint(), line.GetEndPoint(), ((MxDrawLine)entity).GetStartPoint(), ((MxDrawLine)entity).GetEndPoint());
}
}
break;
}
}
//选择集
private void AxMxDrawX1_MouseEvent(object sender, _DMxDrawXEvents_MouseEventEvent e)
{
MxDrawPoint start = new MxDrawPoint(), end = new MxDrawPoint();
if (PublicValue != null)
{
dynamic c = PublicValue;
start.x = c.Lx;
start.y = c.Ly;
start.z = c.Lz;
end.x = c.Rx;
end.y = c.Ry;
end.z = c.Rz;
}
{
MxDrawSelectionSet mxDrawSelection;
MxDrawResbuf filter;
MxDrawPoint point;
if (e.lType == 2 && (Control.ModifierKeys & Keys.Control) == Keys.Control)
{
mxDrawSelection = new MxDrawSelectionSet();
filter = new MxDrawResbuf();
point = new MxDrawPoint();
point.x = e.dX; point.y = e.dY;
mxDrawSelection.SelectAtPoint(point, filter);
//MessageBox.Show(mxDrawSelection.Count.ToString());
if (mxDrawSelection.Count > 0)
{
if (start.x != 0 && end.x != 0)
{
if (!MathSience.IsContains(point, start, end))
{
return;
}
}
//MessageBox.Show(mxDrawSelection.Item(0).handle.ToString());
axMxDrawX1.TwinkeEnt(mxDrawSelection.Item(0).ObjectID);
if (BeamType == "change_line")
{
if (beam.beam.side_lines.Find(x => x == mxDrawSelection.Item(0).handle) == null)
{
beam.beam.side_lines.Add(mxDrawSelection.Item(0).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(0).ObjectID);
beam.beam.side_lines.Remove(mxDrawSelection.Item(0).handle);
}
}
if (BeamType == "change_dim")
{
if (beam.beam.dim_texts.Find(x => x == mxDrawSelection.Item(0).handle) == null)
{
beam.beam.dim_texts.Add(mxDrawSelection.Item(0).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(0).ObjectID);
beam.beam.dim_texts.Remove(mxDrawSelection.Item(0).handle);
}
}
if (BeamType == "change_seat")
{
if (beam.beam.seat_lines.Find(x => x == mxDrawSelection.Item(0).handle) == null)
{
beam.beam.seat_lines.Add(mxDrawSelection.Item(0).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(0).ObjectID);
beam.beam.seat_lines.Remove(mxDrawSelection.Item(0).handle);
}
}
}
}
else if (e.lType == 2 && (Control.ModifierKeys & Keys.Shift) == Keys.Shift)
{
//dynamic pt = PublicValue;
//MxDrawPoint sp = new MxDrawPoint { x = pt.Lx, y = pt.Ly };
//MxDrawPoint ep = new MxDrawPoint { x = pt.Rx, y = pt.Ry };
mxDrawSelection = new MxDrawSelectionSet();
filter = new MxDrawResbuf();
point = new MxDrawPoint();
point.x = e.dX; point.y = e.dY;
mxDrawSelection.SelectAtPoint(point, filter);
if (mxDrawSelection.Count > 0)
{
MxDrawEntity entity = mxDrawSelection.Item(0);
//MessageBox.Show(entity.Layer);
filter = new MxDrawResbuf();
mxDrawSelection = new MxDrawSelectionSet();
filter.AddStringEx(entity.Layer, 8);//
if (start.x == 0)
{
mxDrawSelection.Select(MCAD_McSelect.mcSelectionSetAll, null, null, filter);//获取此图层元素
}
else
{
mxDrawSelection.Select(MCAD_McSelect.mcSelectionSetWindow, start, end, filter);//获取此图层元素
}
for (int i = 0; i < mxDrawSelection.Count; i++)
{
axMxDrawX1.TwinkeEnt(mxDrawSelection.Item(i).ObjectID);
if (BeamType == "change_line")
{
if (beam.beam.side_lines.Find(x => x == mxDrawSelection.Item(i).handle) == null)
{
beam.beam.side_lines.Add(mxDrawSelection.Item(i).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(i).ObjectID);
beam.beam.side_lines.Remove(mxDrawSelection.Item(i).handle);
}
}
if (BeamType == "change_dim")
{
if (beam.beam.dim_texts.Find(x => x == mxDrawSelection.Item(i).handle) == null)
{
beam.beam.dim_texts.Add(mxDrawSelection.Item(i).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(i).ObjectID);
beam.beam.dim_texts.Remove(mxDrawSelection.Item(i).handle);
}
}
if (BeamType == "change_seat")
{
if (beam.beam.seat_lines.Find(x => x == mxDrawSelection.Item(i).handle) == null)
{
beam.beam.seat_lines.Add(mxDrawSelection.Item(i).handle);
}
else
{
axMxDrawX1.StopTwinkeEnt(mxDrawSelection.Item(i).ObjectID);
beam.beam.seat_lines.Remove(mxDrawSelection.Item(i).handle);
}
}
//beam.beam.seat_lines.Add(mxDrawSelection.Item(i).handle);
//选中元素
//axMxDrawX1.AddCurrentSelect(mxDrawSelection.Item(i).ObjectID, false, false);
}
}
}
//axMxDrawX1.SendStringToExecute("");
};
}
private void makeAutoImgBtn_Click(object sender, RoutedEventArgs e)
{
//先进行参数计算
//每一开深度，三开底部和煤层顶板的距离
double oneKai = 30;
if (wanQuDaiTb.Text.Trim().Equals(""))
{
MessageBox.Show("未计算弯曲带高度，请修正再尝试井型设计");
return;
}
double twoKai = double.Parse(wanQuDaiTb.Text) + 20;
int meiIndex = layers.Count - 1;
for (; meiIndex >= 0; meiIndex--)
{
if (layers[meiIndex].yanXing.Equals("煤"))
{
break;
}
}
if (meiIndex <= 0)
{
MessageBox.Show("岩层数据有误，请修正再尝试自动设计");
tabControl.SelectedItem = gridinputTabItem;
return;
}
double threeKai = layers[meiIndex - 1].leiJiShenDu - 10;
double threeToMei = 10;
//局部固井的深度值
double jbgjShendu = double.Parse(wanQuDaiTb.Text);
//各级套管外径；水泥环厚度
double snhHoudu = editZengYi.a1 - editZengYi.aw;
double tgwj1, tgwj2, tgwj3;
tgwj1 = keyLayers[0].tgwj;
tgwj2 = keyLayers[wanQuDaiIndex].tgwj;
tgwj3 = keyLayers[keyLayers.Count - 1].tgwj;
//高位位置数量，破坏主因
string dangerStr = "";
int dangerCnt = 0;
ERRORCODE errcode = computeSafe(keyLayers.Count);
switch (errcode)
{
case ERRORCODE.计算成功:
for (int i = 0; i < keyLayers.Count; i++)
{
if (keyLayers[i].jqaqxs < 1)
{
keyLayers[i].IsDangerous = true;
dangerCnt++;
dangerStr += "\\P" + dangerCnt + " 深度：" + keyLayers[i].ycsd.ToString("f3") + "m 剪切安全系数低，值为：" + keyLayers[i].jqaqxs.ToString("f3");
}
else if(keyLayers[i].lsaqxs < 1)
{
keyLayers[i].IsDangerous = true;
dangerCnt++;
dangerStr += "\\P" + dangerCnt + " 深度：" + keyLayers[i].ycsd.ToString("f3") + "m 拉伸安全系数低，值为：" + keyLayers[i].lsaqxs.ToString("f3");
}
else
{
keyLayers[i].IsDangerous = false;
}
}
break;
case ERRORCODE.计算异常:
MessageBox.Show("因计算安全系数出错，未生成cad图，请检查数据合理性");
return;
case ERRORCODE.没有关键层数据:
MessageBox.Show("因没有关键层数据，未生成cad图");
return;
}
//显示cad
tabControl.SelectedItem = autoDesignCadTabItem;
cadViewer.OpenDwgFile("cads/三开-一全固二局固三" + AutoWjfs3 + ".dwg");
cadViewer.ZoomCenter(2500, 300);
cadViewer.ZoomScale(1);
//参数标注
MxDrawSelectionSet ss = new MxDrawSelectionSet();
IMxDrawResbuf spFilter = new MxDrawResbuf();
ss.Select2(MCAD_McSelect.mcSelectionSetAll, null, null, null, null);
for (int j = 0; j < ss.Count; j++)
{
MxDrawEntity ent = ss.Item(j);
if (ent is MxDrawMText)
{
MxDrawMText mText = (MxDrawMText)ent;
string contents = mText.Contents;
//MessageBox.Show(contents);
//地面井名称
if(contents.Contains("地面井名称"))
{
mText.Contents = contents.Replace("地面井名称", "地面井名称:" + Path.GetFileNameWithoutExtension(FilePath));
}
//描述
else if(contents.Contains("一开结构"))
{
mText.Contents = contents.Replace("一开结构", "一开结构\\P\\P" + AutoMiaoshu1);
}
else if(contents.Contains("二开结构")){
mText.Contents = contents.Replace("二开结构", "二开结构\\P\\P" + AutoMiaoshu2);
}
else if(contents.Contains("三开结构")){
mText.Contents = contents.Replace("三开结构", "三开结构\\P\\P" + AutoMiaoshu3);
}
//各级套管深度、局部固井深度、三开底部和煤层顶板的距离
else if (contents.Contains("一开深度"))
{
mText.Contents = contents.Replace("一开深度", oneKai.ToString("f3") + "m");
}
else if (contents.Contains("二开深度"))
{
mText.Contents = contents.Replace("二开深度", twoKai.ToString("f3") + "m");
}
else if (contents.Contains("三开深度"))
{
mText.Contents = contents.Replace("三开深度", threeKai.ToString("f3") + "m");
}
else if (contents.Contains("局部固井深度"))
{
mText.Contents = contents.Replace("局部固井深度", jbgjShendu.ToString("f3") + "m");
}
else if (contents.Contains("底部到顶板距离"))
{
mText.Contents = contents.Replace("底部到顶板距离", threeToMei.ToString("f3") + "m");
}
//各级套管型号和参数
else if (contents.Contains("各级套管型号和参数"))
{
mText.Contents = contents.Replace("各级套管型号和参数", "各级套管型号和参数\\P\\P" +
"一开型号：" + AutoTgxh1 + " 外径：" + tgwj1 + "mm" + "\\P" +
"二开型号：" + AutoTgxh2 + " 外径：" + tgwj2 + "mm" + "\\P" +
"三开型号：" + AutoTgxh3 + " 外径：" + tgwj3 + "mm" );
}
//固井工艺、完井工艺、水泥环厚度
else if (contents.Contains("固井工艺、完井工艺、水泥环厚度"))
{
mText.Contents = contents.Replace("固井工艺、完井工艺、水泥环厚度", "固井工艺、完井工艺、水泥环厚度\\P\\P" +
"一全固二局固三" + AutoWjfs3 + "\\P" +
"水泥环厚度：" + snhHoudu + "m");
}
//高危位置
else if (contents.Contains("高危位置"))
{
mText.Contents = contents.Replace("高危位置", "高危位置数量：" + dangerCnt + "\\P" + dangerStr);
}
}
}
cadViewer.ReDraw();
}
//获取相邻的梁线
public MxDrawLine GetMoreLine(MxDrawLine line)
{
int range = 600;
MxDrawSelectionSet collect = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
MxDrawPoint start = line.GetStartPoint();
MxDrawPoint end = line.GetEndPoint();
MxDrawLayerTable layer = (Program.MainForm.axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
collect.Select(MCAD_McSelect.mcSelectionSetCrossing, new MxDrawPoint
{
x = end.x + range,
y = end.y + range,
z = end.z
}, new MxDrawPoint
{
x = end.x - range,
y = end.y - range,
z = end.z
}, filter);
//获取线判断角度<2
for (int i = 0; i < collect.Count; i++)
{
MxDrawLine entity = collect.Item(i) as MxDrawLine;
if (entity == null)
{
continue;
}
if (entity.handle == line.handle)
{
continue;
}
if (entity.ObjectName == "McDbLine")
{
MxDrawLayerTableRecord cd = layer.GetAt(entity.Layer);
if (cd.Color.colorIndex != 1)
{
double angleLine = MathSience.GetAngle(line.EndPoint, entity.StartPoint, entity.EndPoint);
if (angleLine < 2)
{
double angle = MathSience.GetAngle2(line.GetStartPoint(), line.GetEndPoint());
double angle2 = MathSience.GetAngle2(entity.GetStartPoint(), entity.GetEndPoint());
if ((angle < 3 && angle > -2) || Math.Abs(Math.Round(angle)) == 180)//左右
{
if (angle2 < 3 && angle2 > -2)
{
if (MathSience.GetDistance(entity.StartPoint.x, entity.StartPoint.y, entity.EndPoint.x, entity.EndPoint.y) > 100)
{
return(entity);
}
}
}
if ((angle > 80 && angle < 95) || (angle < -80 && angle > -95))//上下
{
if ((angle2 > 80 && angle2 < 95) || (angle2 < -80 && angle2 > -95))
{
if (MathSience.GetDistance(entity.StartPoint.x, entity.StartPoint.y, entity.EndPoint.x, entity.EndPoint.y) > 100)
{
return(entity);
}
}
}
}
}
}
}
return(new MxDrawLine());
}
//获取平行线
public MxDrawLine GetparallelLine(MxDrawLine line)
{
double range = 600, range2 = 600;
MxDrawPoint start = line.GetStartPoint();
MxDrawPoint end = line.GetEndPoint();
MxDrawSelectionSet select = new MxDrawSelectionSet();
MxDrawResbuf filter = new MxDrawResbuf();
MxDrawLayerTable layer = (Program.MainForm.axMxDrawX1.GetDatabase() as MxDrawDatabase).GetLayerTable();
double angle = MathSience.GetAngle2(start, end);
if (angle < 3 && angle > -2)
{
range = 0;
}
else
{
range2 = 0;
}
select.Select(MCAD_McSelect.mcSelectionSetCrossing, new MxDrawPoint
{
x = start.x - range,
y = start.y - range2,
z = start.z
}, new MxDrawPoint
{
x = end.x + range,
y = end.y + range2,
z = end.z
}, filter);
//Program.MainForm.axMxDrawX1.DrawLine(end.x - range, end.y - range2, end.x - range, end.y+range2);
//Program.MainForm.axMxDrawX1.DrawLine(end.x - range, end.y + range2, end.x + range, end.y + range2);
//Program.MainForm.axMxDrawX1.DrawLine(end.x + range, end.y + range2, end.x + range, end.y - range2);
//Program.MainForm.axMxDrawX1.DrawLine(end.x + range, end.y - range2, end.x - range, end.y - range2);
for (int i = 0; i < select.Count; i++)
{
MxDrawLine entity = select.Item(i) as MxDrawLine;
if (entity == null)
{
continue;
}
if (select.Item(i).ObjectName == "McDbLine")
{
MxDrawLayerTableRecord dd = layer.GetAt(entity.Layer);
if (line.handle != entity.handle && dd.Color.colorIndex != 1)
{
if (MathSience.parallel(entity.GetStartPoint(), entity.GetEndPoint(), line.GetStartPoint(), line.GetEndPoint()))
{
PointF point = MathSience.point_intersection(line.GetStartPoint(), line.GetEndPoint(), entity.GetStartPoint(), entity.GetEndPoint());
//if (point.X==0&&point.Y==0)
{
var c1 = entity.GetStartPoint();
var c2 = entity.GetEndPoint();
//if (MathSience.GetPointIsInLine(point, c1, c2, 2))
{
return(entity);
}
}
}
}
}
}
return(new MxDrawLine());
}
private void FillBeamStruct()
{
#region beam
HLTSmart smart = new HLTSmart();
//第一步：遍历所有文字，找出满足如下正则表达式的文字，即为集中标注第一行
List <Regex> regex1 = new List <Regex> {
//new Regex(@"(KL|L|WKL|WL|KZL|LL|JL|DL)[-]?\d{1,4}")
new Regex(@"((KL|L|WKL|WL|KZL|LL|JL|DL)(\d{1,4})\([A-Z0-9]{1,4}\)\s)?(\d{1,4})X(\d{1,4})")
};
List <Text> texts = new List <Text>();
//获取dim_text值
MxDrawText entity;
foreach (var item in beam.dim_texts)
{
entity = Program.MainForm.axMxDrawX1.HandleToObject(item) as MxDrawText;
if (entity != null)
{
texts.Add(new Text
{
Position = new Point3d {
X = entity.Position.x, Y = entity.Position.y, Z = entity.Position.z
},
Layer = entity.Layer,
TextString = entity.TextString,
Height = entity.Height,
Rotation = entity.Rotation
});
}
}
List <Text> Restexts = smart.GetWord(texts, regex1);
//第二步：找到后还需验证这个字的左侧定位点 字体高度2倍范围内有无直线（即指示线）
Point3d pt = new Point3d();
MxDrawSelectionSet select = new MxDrawSelectionSet();
foreach (var item in Restexts)
{
pt = item.Position;
MxDrawPoint pt1 = new MxDrawPoint
{
x = pt.X - 1 * item.Height,
y = pt.Y - 1 * item.Height,
z = pt.Z
};
MxDrawPoint pt2 = new MxDrawPoint
{
x = pt.X + 1 * item.Height,
y = pt.Y + 1 * item.Height,
z = pt.Z
};
//Program.MainForm.axMxDrawX1.DrawLine(pt.X, pt.Y, pt.X+1, pt.Y+1);
//Program.MainForm.axMxDrawX1.DrawLine(pt1.x, pt1.y, pt1.x, pt2.y);
//Program.MainForm.axMxDrawX1.DrawLine(pt1.x, pt2.y, pt2.x, pt2.y);
//Program.MainForm.axMxDrawX1.DrawLine(pt2.x, pt2.y, pt2.x, pt1.y);
//Program.MainForm.axMxDrawX1.DrawLine(pt2.x, pt1.y, pt1.x, pt1.y);
select.Select(MCAD_McSelect.mcSelectionSetCrossing, pt1, pt2, new MxDrawResbuf());
MxDrawLine drawEntity; MxDrawPoint pst, ped;
List <Text> text3 = new List <Text>();
for (int i = 0; i < select.Count; i++)
{
drawEntity = select.Item(i) as MxDrawLine;
//第三步：遍历第二步的结果，逐一按下面计算，例如第n个结果
if (drawEntity != null && drawEntity.ObjectName == "McDbLine")
{
Program.MainForm.axMxDrawX1.TwinkeEnt(drawEntity.ObjectID);
pst = drawEntity.GetStartPoint();
ped = drawEntity.GetEndPoint();
text3 = smart.SelectTextByBox(texts, new Point3d
{
X = pst.x,
Y = pst.y,
Z = pst.z
}, item.Position);
//第四步：从第三步结果中逐行用关键字匹配出参数信息
Beam beams = new Beam();
beams.owner = new List <string>();
beams.Sections = new List <Beam_Section>();
beams.Stirrup_info = new List <Stirrup_Dim>();
beams.Public_Bar = new List <Rebar_Dim>();
beams.Mid_Beam_Rebars = new List <List <Rebar_Dim> >();
beams.Waist_Bar = new List <Rebar_Dim>();
beams.Twist_Bar = new List <Rebar_Dim>();
string kval = "";
for (int k = 0; k < text3.Count; k++)
{
//KL14(1A) 300X400
kval = Regex.Match(text3[k].TextString, @"(KL|L|WKL|WL|KZL|LL|JL|DL)").Value;
if (kval != "")
{
beams.type = kval;//(Side_type)Enum.Parse(typeof(Side_type),kval);
beams.owner = GetItemAsync(text3[k].TextString);
}
//梁截面
kval = Regex.Match(text3[k].TextString, @"(\d{2,4}~)?(\d{2,4})(x|X)(\d{2,4})(~\d{2,4})?").Value;
string[] vals = kval.Split(new char[] { '~', 'x', 'X' });
if (kval != "")
{
if (kval.IndexOf('~') == -1)
{
beams.Sections.Add(new Beam_Section
{
a = 1,
b = Convert.ToDouble(vals[0]),
h = Convert.ToDouble(vals[1])
});
}
else
{
if (kval.IndexOf("x", StringComparison.OrdinalIgnoreCase) > kval.IndexOf('~'))
{
//变截面宽 350~450x700
beams.Sections.Add(new Beam_Section
{
a = 1,
b = Convert.ToDouble(vals[0]),
h = Convert.ToDouble(vals[2]),
});
beams.Sections.Add(new Beam_Section
{
a = 1,
b = Convert.ToDouble(vals[1]),
h = Convert.ToDouble(vals[2]),
});
}
else
{
//变截面高 350x650~800
beams.Sections.Add(new Beam_Section
{
a = 1,
b = Convert.ToDouble(vals[0]),
h = Convert.ToDouble(vals[1]),
});
beams.Sections.Add(new Beam_Section
{
a = 1,
b = Convert.ToDouble(vals[0]),
h = Convert.ToDouble(vals[2]),
});
}
}
continue;
}
//箍筋 Φ12@100/200(4)
kval = Regex.Match(text3[k].TextString, @"((%%130)|(%%131)|(%%132))(\d{1,3})@(\d{2,3})(/\d{2,3})?\(\d{1,2}\)").Value;
if (kval != "")
{
beams.Stirrup_info.Add(new Stirrup_Dim
{
D = Convert.ToDouble(kval.Substring(5, kval.IndexOf('@') - 5)),
Se = Convert.ToDouble(SplitStr(kval, kval.IndexOf('@'), "/(")),
Sa = Convert.ToDouble(SplitStr(kval, kval.IndexOf('/'), "((")),
n = Convert.ToInt32(SplitStr(kval, kval.IndexOf('('), "))"))
});
continue;
}
//通长钢筋 4Φ20;7Φ20 3/4
kval = Regex.Match(text3[k].TextString, @"^[A-Z]{0}(\(?\d{1,3}%%132\d{1,3}\)?)(\+\(?\d{1,3}%%132\d{1,3}\))?;?(\(?\d{1,3}%%132\d{1,3}\)?)?\s?(/?(\d{1,3})?)*").Value;
if (kval != "")
{
string[] sp1 = kval.Split(';');
for (int v = 0; v < sp1.Count(); v++)
{
string[] sp2 = sp1[v].Split('+');
for (int f = 0; f < sp2.Count(); f++)
{
sp2[f] = sp2[f].Replace("(", "");
sp2[f] = sp2[f].Replace(")", "");
sp2[f] = sp2[f].Replace("%%132", "|");
string[] sp3 = sp2[f].Split('|');
List <Rebar_Dim> Bdim = new List <Rebar_Dim>();
if (sp2[f].IndexOf('/') == -1)
{
int c = 0;
if (sp2.Count() > 1)
{
c = f + 1;
}
if (v == 1)
{
Bdim.Add(new Rebar_Dim
{
C = c,
n = Convert.ToInt32(sp3[0]),
D = Convert.ToInt32(sp3[1])
});
}
else
{
beams.Public_Bar.Add(new Rebar_Dim
{
C = c,
n = Convert.ToInt32(sp3[0]),
D = Convert.ToInt32(sp3[1])
});
}
}
else
{
sp3[1] = sp3[1].Split(' ')[0];
string xi = sp2[f].Substring(sp2[f].IndexOf(' '));
string[] sp4 = xi.Trim().Split('/');
for (int s = 0; s < sp4.Count(); s++)
{
if (v == 1)
{
Bdim.Add(new Rebar_Dim
{
n = Convert.ToInt32(sp4[s]),
D = Convert.ToInt32(sp3[1])
});
}
else
{
beams.Public_Bar.Add(new Rebar_Dim
{
n = Convert.ToInt32(sp4[s]),
D = Convert.ToInt32(sp3[1])
});
}
}
}
beams.Mid_Beam_Rebars.Add(Bdim);
}
}
continue;
}
//腰筋 G4Φ12+N4Φ12
kval = Regex.Match(text3[k].TextString, @"(\+?(G|N)\d{1,3}%%132\d{1,3})*").Value;
if (kval != null)
{
string[] sp1 = kval.Split('+');
for (int c = 0; c < sp1.Length; c++)
{
sp1[c] = sp1[c].Replace("%%132", "|");
string[] sp2 = sp1[c].Split('|');
if (sp2.Length == 2)
{
char G = sp2[0][0];
int N = Convert.ToInt32(sp2[0].Substring(1));
int C = 0; if (sp1.Length == 2)
{
C = c + 1;
}
if (G == 'G')
{
beams.Waist_Bar.Add(new Rebar_Dim
{
n = N,
C = C,
D = Convert.ToDouble(sp2[1])
});
}
if (G == 'N')
{
beams.Twist_Bar.Add(new Rebar_Dim
{
n = N,
C = C,
D = Convert.ToDouble(sp2[1])
});
}
}
}
continue;
}
//标高 (-0.150)
kval = Regex.Match(text3[k].TextString, @"(\(?-?\d{1,3}.\d{3}\)?)").Value;
if (kval != null)
{
kval = kval.Replace("(", "");
kval = kval.Replace(")", "");
beams.Sections = beams.Sections.Select(x => { x.H = Convert.ToDouble(kval); return(x); }).ToList();
}
}
beam.beams.Add(beams);
beams.side_lines = new List <string>();
//识别梁
//1.集中标注指示线两个端点分别找到垂直距离最近的梁线，两者最近的就是第一根梁线L1
MxDrawLine LT1;
MxDrawLine L1 = GetLineForRange(drawEntity);
beams.side_lines.Add(L1.handle);
//L1 = Program.MainForm.axMxDrawX1.HandleToObject("61FBA") as MxDrawLine;
LT1 = L1;
for (int c1 = 0; c1 < 2; c1++)
{
//2.L1有两个点P1,P2，先从P1开始如下步骤，完了之后再P2
//3.找距离P1点2000内的支座线，并且L1与支座线交点距离P1小于300,若有结果则按3.2若无结果按3.1
L1 = LT1;
Program.MainForm.axMxDrawX1.TwinkeEnt(L1.ObjectID);
int cs = 0;
do
{
if (c1 == 1)
{
MxDrawPoint temp = L1.StartPoint;
L1.StartPoint = L1.EndPoint;
L1.EndPoint = temp;
}
MxDrawPolyline seat = GetSeatForRange(L1.EndPoint, L1.StartPoint);
MxDrawLine L2 = new MxDrawLine();
MxDrawLine L2s = new MxDrawLine();
MxDrawLine Rline = new MxDrawLine();
if (seat.handle != "0")
{
//有结果3.2
L2 = GetparallelLine(L1);
Rline = GetXpoint(L1.EndPoint, L1.StartPoint, seat);
L1 = Rline;
beams.side_lines.Add(L2.handle);
beams.side_lines.Add(Rline.handle);
}
else
{
//无结果3.1
L2s = GetMoreLine(L1);
L2 = GetparallelLine(L1);
L1 = L2s;
beams.side_lines.Add(L2s.handle);
}
//3.1 找到另一根梁线L2，L2的两个端点之一与P1最近且距离小于600且两线角度差别不超过2度，找到后凭L2另一个端点重复3
/*3.2 说明一段梁结束，去寻找这段梁已识别梁线的平行线，即水平距离小于梁宽的1.5倍且两线相关，
* 再寻找与这些梁线共点且角度差别小于40度的梁线，找完写入beam；
* 然后用3的支座线与L1求到最远相关交点P3，求与P3最近的梁线，且角度差别小于40度，用这根新梁线远端点作为P1重复3
*/
cs++;
//Program.MainForm.axMxDrawX1.StopAllTwinkeEnt();
Program.MainForm.axMxDrawX1.TwinkeEnt(L1.ObjectID);
Program.MainForm.axMxDrawX1.TwinkeEnt(L2s.ObjectID);
Program.MainForm.axMxDrawX1.TwinkeEnt(seat.ObjectID);
Program.MainForm.axMxDrawX1.TwinkeEnt(L2.ObjectID);
Program.MainForm.axMxDrawX1.TwinkeEnt(Rline.ObjectID);
if (cs > 10)
{
break;
}
} while (L1.handle != "0");
}
//break;
}
}
}
#endregion over
}