public override void OnInspectorGUI()
{
MegaLoftLayerCloneSplineRules layer = (MegaLoftLayerCloneSplineRules)target;
MegaShapeLoft loft = layer.GetComponent <MegaShapeLoft>();
if (loft && loft.undo)
{
undoManager.CheckUndo();
}
DisplayGUI();
CommonGUI();
if (GUI.changed)
{
if (loft)
{
loft.rebuild = true;
EditorUtility.SetDirty(loft);
}
if (layer)
{
EditorUtility.SetDirty(layer);
}
}
if (loft && loft.undo)
{
undoManager.CheckDirty();
}
}
public override MegaLoftLayerBase Copy(GameObject go)
{
MegaLoftLayerCloneSplineRules layer = go.AddComponent <MegaLoftLayerCloneSplineRules>();
Copy(this, layer);
loftverts = null;
loftuvs = null;
loftcols = null;
lofttris = null;
return(null);
}
private void OnEnable()
{
src = target as MegaLoftLayerCloneSplineRules;
undoManager = new MegaUndo(src, "Clone Spline Param");
}
void OnGUI()
{
if (Selection.activeGameObject == null)
{
return;
}
MegaShapeLoft loft = Selection.activeGameObject.GetComponent <MegaShapeLoft>();
if (loft == null)
{
return;
}
lofttype = (MegaLoftType)EditorGUILayout.EnumPopup("Type", lofttype);
LayerName = EditorGUILayout.TextField("Name", LayerName);
start = EditorGUILayout.FloatField("Start", start);
length = EditorGUILayout.FloatField("Length", length);
paramCol = EditorGUILayout.ColorField("Param Col", paramCol);
EditorStyles.textField.wordWrap = true;
switch (lofttype)
{
case MegaLoftType.Simple:
EditorGUILayout.TextArea("Basic Loft layer that uses a single spline for the path and another spline for the cross section", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
section = (MegaShape)EditorGUILayout.ObjectField("Section", section, typeof(MegaShape), true);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
//case MegaLoftType.Collider:
// colliderwidth = EditorGUILayout.FloatField("Collider Width", colliderwidth);
// break;
case MegaLoftType.CloneSimple:
EditorGUILayout.TextArea("Clone a mesh onto a surface with options for start, end and main meshes", GUILayout.Height(50.0f));
startObjMesh = (Mesh)EditorGUILayout.ObjectField("Start Obj", startObjMesh, typeof(Mesh), true);
mainObjMesh = (Mesh)EditorGUILayout.ObjectField("Main Obj", mainObjMesh, typeof(Mesh), true);
endObjMesh = (Mesh)EditorGUILayout.ObjectField("End Obj", endObjMesh, typeof(Mesh), true);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.ScatterSimple:
EditorGUILayout.TextArea("Scatters a choosen mesh and material over a surface", GUILayout.Height(50.0f));
mainObjMesh = (Mesh)EditorGUILayout.ObjectField("Obj", mainObjMesh, typeof(Mesh), true);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.Scatter:
EditorGUILayout.TextArea("Builds a mesh layer by scattering a choosen object over a surface", GUILayout.Height(50.0f));
mainObj = (GameObject)EditorGUILayout.ObjectField("Obj", mainObj, typeof(Mesh), true);
mainObj = MegaMeshCheck.ValidateObj(mainObj);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
break;
case MegaLoftType.ScatterSpline:
EditorGUILayout.TextArea("Build a mesh by scattering a choosen mesh and material along a spline", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
mainObjMesh = (Mesh)EditorGUILayout.ObjectField("Obj", mainObjMesh, typeof(Mesh), true);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.Complex:
EditorGUILayout.TextArea("Advanced lofter that uses a spline for the path and any number of cross section splines to define the loft", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
section = (MegaShape)EditorGUILayout.ObjectField("Section", section, typeof(MegaShape), true);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.CloneSplineSimple:
EditorGUILayout.TextArea("Clone a mesh along a spline with options for start, end and main meshes", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
startObjMesh = (Mesh)EditorGUILayout.ObjectField("Start Obj", startObjMesh, typeof(Mesh), true);
//startObj = MegaMeshCheck.ValidateObj(startObj);
mainObjMesh = (Mesh)EditorGUILayout.ObjectField("Main Obj", mainObjMesh, typeof(Mesh), true);
//mainObj = MegaMeshCheck.ValidateObj(mainObj);
endObjMesh = (Mesh)EditorGUILayout.ObjectField("End Obj", endObjMesh, typeof(Mesh), true);
//endObj = MegaMeshCheck.ValidateObj(endObj);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.Clone:
EditorGUILayout.TextArea("Clone a mesh onto a surface with options for start, end and main meshes", GUILayout.Height(50.0f));
startObj = (GameObject)EditorGUILayout.ObjectField("Start Obj", startObj, typeof(GameObject), true);
startObj = MegaMeshCheck.ValidateObj(startObj);
mainObj = (GameObject)EditorGUILayout.ObjectField("Main Obj", mainObj, typeof(GameObject), true);
mainObj = MegaMeshCheck.ValidateObj(mainObj);
endObj = (GameObject)EditorGUILayout.ObjectField("End Obj", endObj, typeof(GameObject), true);
endObj = MegaMeshCheck.ValidateObj(endObj);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.CloneSpline:
EditorGUILayout.TextArea("Build a mesh layer by cloning objects along a spline with options for start, end and main objects", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
startObj = (GameObject)EditorGUILayout.ObjectField("Start Obj", startObj, typeof(GameObject), true);
startObj = MegaMeshCheck.ValidateObj(startObj);
mainObj = (GameObject)EditorGUILayout.ObjectField("Main Obj", mainObj, typeof(GameObject), true);
mainObj = MegaMeshCheck.ValidateObj(mainObj);
endObj = (GameObject)EditorGUILayout.ObjectField("End Obj", endObj, typeof(GameObject), true);
endObj = MegaMeshCheck.ValidateObj(endObj);
break;
case MegaLoftType.CloneRules:
EditorGUILayout.TextArea("Rule based clone onto a surface", GUILayout.Height(50.0f));
//path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
break;
case MegaLoftType.CloneSplineRules:
EditorGUILayout.TextArea("Rule based clone along a spline", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
surfaceLoft = (MegaShapeLoft)EditorGUILayout.ObjectField("Surface", surfaceLoft, typeof(MegaShapeLoft), true);
surfaceLayer = EditorGUILayout.Popup("Layer", surfaceLayer + 1, MegaShapeUtils.GetLayers(surfaceLoft)) - 1;
break;
#if true
case MegaLoftType.MultiMaterial:
EditorGUILayout.TextArea("Will create a loft using multiple materials based on material ids in the spline knots. It uses a single spline for the path and another spline for the cross section", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
section = (MegaShape)EditorGUILayout.ObjectField("Section", section, typeof(MegaShape), true);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
case MegaLoftType.MultiMaterialComplex:
EditorGUILayout.TextArea("Will create a complex loft using multiple materials based on material ids in the spline knots. It uses a single spline for the path and another spline for the cross section", GUILayout.Height(50.0f));
path = (MegaShape)EditorGUILayout.ObjectField("Path", path, typeof(MegaShape), true);
section = (MegaShape)EditorGUILayout.ObjectField("Section", section, typeof(MegaShape), true);
material = (Material)EditorGUILayout.ObjectField("Material", material, typeof(Material), true);
break;
#endif
}
EditorStyles.textField.wordWrap = false;
EditorGUILayout.BeginHorizontal();
if (GUILayout.Button("Create"))
{
MegaLoftLayerBase laybase = null;
switch (lofttype)
{
case MegaLoftType.Simple:
{
MegaLoftLayerSimple layer = Selection.activeGameObject.AddComponent <MegaLoftLayerSimple>();
layer.pathStart = start;
layer.pathLength = length;
layer.layerPath = path;
layer.layerSection = section;
laybase = layer;
}
break;
case MegaLoftType.CloneSimple:
{
MegaLoftLayerCloneSimple layer = Selection.activeGameObject.AddComponent <MegaLoftLayerCloneSimple>();
layer.startObj = startObjMesh;
layer.mainObj = mainObjMesh;
layer.endObj = endObjMesh;
layer.surfaceLoft = surfaceLoft;
layer.surfaceLayer = surfaceLayer;
laybase = layer;
}
break;
case MegaLoftType.ScatterSimple:
{
MegaLoftLayerScatterSimple layer = Selection.activeGameObject.AddComponent <MegaLoftLayerScatterSimple>();
layer.scatterMesh = mainObjMesh;
layer.surfaceLoft = surfaceLoft;
layer.surfaceLayer = surfaceLayer;
laybase = layer;
}
break;
case MegaLoftType.Scatter:
{
MegaLoftLayerScatter layer = Selection.activeGameObject.AddComponent <MegaLoftLayerScatter>();
layer.mainObj = mainObj;
layer.surfaceLoft = surfaceLoft;
layer.surfaceLayer = surfaceLayer;
laybase = layer;
}
break;
case MegaLoftType.ScatterSpline:
{
MegaLoftLayerScatterSpline layer = Selection.activeGameObject.AddComponent <MegaLoftLayerScatterSpline>();
layer.scatterMesh = mainObjMesh;
layer.layerPath = path;
laybase = layer;
}
break;
case MegaLoftType.Complex:
{
MegaLoftLayerComplex layer = Selection.activeGameObject.AddComponent <MegaLoftLayerComplex>();
layer.layerPath = path;
layer.layerSection = section;
laybase = layer;
}
break;
case MegaLoftType.CloneSplineSimple:
{
MegaLoftLayerCloneSplineSimple layer = Selection.activeGameObject.AddComponent <MegaLoftLayerCloneSplineSimple>();
layer.layerPath = path;
layer.startObj = startObjMesh;
layer.mainObj = mainObjMesh;
layer.endObj = endObjMesh;
laybase = layer;
}
break;
case MegaLoftType.CloneSpline:
{
MegaLoftLayerCloneSpline layer = Selection.activeGameObject.AddComponent <MegaLoftLayerCloneSpline>();
layer.layerPath = path;
layer.startObj = startObj;
layer.mainObj = mainObj;
layer.endObj = endObj;
laybase = layer;
}
break;
case MegaLoftType.Clone:
{
MegaLoftLayerClone layer = Selection.activeGameObject.AddComponent <MegaLoftLayerClone>();
layer.surfaceLoft = surfaceLoft;
layer.surfaceLayer = surfaceLayer;
layer.startObj = startObj;
layer.mainObj = mainObj;
layer.endObj = endObj;
laybase = layer;
}
break;
case MegaLoftType.CloneRules:
{
MegaLoftLayerCloneRules layer = Selection.activeGameObject.AddComponent <MegaLoftLayerCloneRules>();
layer.surfaceLoft = surfaceLoft;
layer.surfaceLayer = surfaceLayer;
//layer.layerPath = path;
//layer.layerSection = section;
laybase = layer;
}
break;
case MegaLoftType.CloneSplineRules:
{
MegaLoftLayerCloneSplineRules layer = Selection.activeGameObject.AddComponent <MegaLoftLayerCloneSplineRules>();
layer.layerPath = path;
laybase = layer;
}
break;
#if true
case MegaLoftType.MultiMaterial:
{
MegaLoftLayerMultiMat layer = Selection.activeGameObject.AddComponent <MegaLoftLayerMultiMat>();
layer.pathStart = start;
layer.pathLength = length;
layer.layerPath = path;
layer.layerSection = section;
MegaMaterialSection ms = new MegaMaterialSection();
ms.mat = material;
layer.sections.Add(ms);
laybase = layer;
}
break;
// We should add two loft sections
// if cross has multiple splines add them all equally spaced?
case MegaLoftType.MultiMaterialComplex:
{
MegaLoftLayerMultiMatComplex layer = Selection.activeGameObject.AddComponent <MegaLoftLayerMultiMatComplex>();
layer.pathStart = start;
layer.pathLength = length;
layer.layerPath = path;
layer.layerSection = section;
MegaMaterialSection ms = new MegaMaterialSection();
ms.mat = material;
layer.sections.Add(ms);
laybase = layer;
}
break;
#endif
default:
EditorUtility.DisplayDialog("Layer Not Supported", "Currently this layer type is not not supported", "OK");
break;
}
// Common params
if (laybase)
{
laybase.paramcol = paramCol;
laybase.LayerName = LayerName;
laybase.LayerName = LayerName;
laybase.material = material;
}
this.Close();
}
if (GUILayout.Button("Cancel"))
{
this.Close();
}
EditorGUILayout.EndHorizontal();
}
private void OnEnable()
{
src = target as MegaLoftLayerCloneSplineRules;
undoManager = new MegaUndo(src, "Clone Spline Param");
}
public void DisplayGUI()
{
MegaLoftLayerCloneSplineRules layer = (MegaLoftLayerCloneSplineRules)target;
MegaShapeLoftEditor.PushCols();
GUI.color = Color.white;
GUI.backgroundColor = layer.paramcol;
GUI.contentColor = Color.white;
EditorGUILayout.BeginVertical("TextArea");
SetLimits(layer.gameObject);
layer.LayerName = EditorGUILayout.TextField(MegaToolTip.LayerName, layer.LayerName);
layer.LayerEnabled = EditorGUILayout.Toggle(MegaToolTip.Enabled, layer.LayerEnabled);
layer.paramcol = EditorGUILayout.ColorField(MegaToolTip.ParamCol, layer.paramcol);
if (layer.LayerEnabled)
{
layer.Lock = EditorGUILayout.Toggle("Lock", layer.Lock);
if (!layer.Lock)
{
layer.layerPath = (MegaShape)EditorGUILayout.ObjectField(MegaToolTip.Path, layer.layerPath, typeof(MegaShape), true);
if (layer.layerPath && layer.layerPath.splines.Count > 1)
{
layer.curve = EditorGUILayout.IntSlider(MegaToolTip.Curve, layer.curve, 0, layer.layerPath.splines.Count - 1);
layer.snap = EditorGUILayout.Toggle(MegaToolTip.Snap, layer.snap);
}
layer.start = EditorGUILayout.Slider(MegaToolTip.Start, layer.start, sl, sh);
layer.Length = EditorGUILayout.Slider(MegaToolTip.Length, layer.Length, ll, lh);
layer.offset = EditorGUILayout.Vector3Field("Offset", layer.offset);
layer.Seed = EditorGUILayout.IntField("Seed", layer.Seed);
layer.tmrot = EditorGUILayout.Vector3Field("TMRotate", layer.tmrot);
layer.scale = EditorGUILayout.Vector3Field("Scale", layer.scale);
layer.tangent = EditorGUILayout.FloatField("Tangent", layer.tangent);
layer.axis = (MegaAxis)EditorGUILayout.EnumPopup("Axis", layer.axis);
layer.twist = EditorGUILayout.FloatField("Twist", layer.twist);
layer.twistCrv = EditorGUILayout.CurveField("Twist Crv", layer.twistCrv);
// Advanced
layer.RemoveDof = EditorGUILayout.FloatField("UpRight", layer.RemoveDof);
layer.GlobalScale = EditorGUILayout.FloatField("Global Scale", layer.GlobalScale);
if (GUILayout.Button("Add Rule"))
{
MegaLoftRule newrule = new MegaLoftRule();
layer.rules.Add(newrule);
GUI.changed = true;
}
//layer.showmainparams = EditorGUILayout.Foldout(layer.showmainparams, "Rules");
layer.showmainparams = MegaFoldOut.Start("Rules", layer.showmainparams, new Color(1.0f, 0.5f, 0.5f));
if (layer.showmainparams)
{
for (int i = 0; i < layer.rules.Count; i++)
{
DisplayRuleGUI(layer.rules[i]);
if (GUILayout.Button("Delete Rule"))
{
layer.rules.RemoveAt(i);
i--;
GUI.changed = true;
}
}
}
MegaFoldOut.End(layer.showmainparams);
}
//EditorGUILayout.EndVertical();
//MegaShapeLoftEditor.PopCols();
layer.showConformParams = MegaFoldOut.Start("Conform Params", layer.showConformParams, new Color(1.0f, 1.0f, 0.5f));
if (layer.showConformParams)
{
layer.conform = EditorGUILayout.BeginToggleGroup("Conform", layer.conform);
GameObject contarget = (GameObject)EditorGUILayout.ObjectField("Target", layer.target, typeof(GameObject), true);
if (contarget != layer.target)
{
layer.SetTarget(contarget);
}
layer.conformAmount = EditorGUILayout.Slider("Amount", layer.conformAmount, 0.0f, 1.0f);
layer.raystartoff = EditorGUILayout.FloatField("Ray Start Off", layer.raystartoff);
layer.conformOffset = EditorGUILayout.FloatField("Conform Offset", layer.conformOffset);
layer.raydist = EditorGUILayout.FloatField("Ray Dist", layer.raydist);
EditorGUILayout.EndToggleGroup();
}
MegaFoldOut.End(layer.showConformParams);
}
EditorGUILayout.EndVertical();
MegaShapeLoftEditor.PopCols();
}
