public static MMesh GetMMesh()
{
mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(0, 0.75f, 0));
MPoint b = mesh.CreatePoint(new Vector3(0, -0.75f, 0));
MCurveEdge curvb = mesh.CreateCurveEdge(b, 0.5f, Vector3.up);
mesh.CreateCircleFace(curvb);
mesh.CreateConeFace(a, curvb);
return(mesh);
}
public static MMesh GetMMesh()
{
mesh = new MMesh();
MPoint center = mesh.CreatePoint(Vector3.zero);
mesh.CreateSphereFace(center, 0.5f);
return(mesh);
}
public static MMesh GetMMesh()
{
MMesh mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(Mathf.Sqrt(3) / 2, 0, -0.5f));
MPoint b = mesh.CreatePoint(new Vector3(-Mathf.Sqrt(3) / 2, 0, -0.5f));
MPoint c = mesh.CreatePoint(new Vector3(0, 0, 1));
MLinearEdge ab = mesh.CreateLinearEdge(a, b);
MLinearEdge bc = mesh.CreateLinearEdge(b, c);
MLinearEdge ca = mesh.CreateLinearEdge(c, a);
List <MLinearEdge> abc = new List <MLinearEdge>();
abc.Add(ab);
abc.Add(bc);
abc.Add(ca);
mesh.CreatePolygonFace(abc);
return(mesh);
}
public static MMesh GetMMesh()
{
MMesh mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(0, 0, 0));
MCurveEdge curv = mesh.CreateCurveEdge(a, 0.5f, Vector3.up);
mesh.CreateCircleFace(curv);
return(mesh);
}
public static MMesh GetMMesh()
{
mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(Mathf.Sqrt(3) / 2, -0.75f, -0.5f));
MPoint b = mesh.CreatePoint(new Vector3(-Mathf.Sqrt(3) / 2, -0.75f, -0.5f));
MPoint c = mesh.CreatePoint(new Vector3(0, -0.75f, 1));
MPoint d = mesh.CreatePoint(new Vector3(0, 0.75f, 0));
MLinearEdge ab = mesh.CreateLinearEdge(a, b);
MLinearEdge bc = mesh.CreateLinearEdge(b, c);
MLinearEdge ca = mesh.CreateLinearEdge(c, a);
MLinearEdge ad = mesh.CreateLinearEdge(a, d);
MLinearEdge bd = mesh.CreateLinearEdge(b, d);
MLinearEdge cd = mesh.CreateLinearEdge(c, d);
List <MLinearEdge> abc = new List <MLinearEdge>();
abc.Add(ab);
abc.Add(bc);
abc.Add(ca);
mesh.CreatePolygonFace(abc);
List <MLinearEdge> abd = new List <MLinearEdge>();
abd.Add(ab);
abd.Add(bd);
abd.Add(ad);
mesh.CreatePolygonFace(abd);
List <MLinearEdge> bcd = new List <MLinearEdge>();
bcd.Add(bc);
bcd.Add(bd);
bcd.Add(cd);
mesh.CreatePolygonFace(bcd);
List <MLinearEdge> cad = new List <MLinearEdge>();
cad.Add(ca);
cad.Add(cd);
cad.Add(ad);
mesh.CreatePolygonFace(cad);
return(mesh);
}
public static MMesh GetMMesh()
{
MMesh mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(Mathf.Sqrt(3) / 4, -0.75f, -0.25f));
MPoint b = mesh.CreatePoint(new Vector3(-Mathf.Sqrt(3) / 4, -0.75f, -0.25f));
MPoint c = mesh.CreatePoint(new Vector3(0, -0.75f, 0.5f));
MPoint e = mesh.CreatePoint(new Vector3(Mathf.Sqrt(3) / 4, 0.75f, -0.25f));
MPoint f = mesh.CreatePoint(new Vector3(-Mathf.Sqrt(3) / 4, 0.75f, -0.25f));
MPoint g = mesh.CreatePoint(new Vector3(0, 0.75f, 0.5f));
MLinearEdge ab = mesh.CreateLinearEdge(a, b);
MLinearEdge bc = mesh.CreateLinearEdge(b, c);
MLinearEdge ca = mesh.CreateLinearEdge(c, a);
MLinearEdge ef = mesh.CreateLinearEdge(e, f);
MLinearEdge fg = mesh.CreateLinearEdge(f, g);
MLinearEdge ge = mesh.CreateLinearEdge(g, e);
MLinearEdge ae = mesh.CreateLinearEdge(a, e);
MLinearEdge bf = mesh.CreateLinearEdge(b, f);
MLinearEdge cg = mesh.CreateLinearEdge(c, g);
List <MLinearEdge> abc = new List <MLinearEdge>();
abc.Add(ab);
abc.Add(bc);
abc.Add(ca);
mesh.CreatePolygonFace(abc);
List <MLinearEdge> efg = new List <MLinearEdge>();
efg.Add(ef);
efg.Add(fg);
efg.Add(ge);
mesh.CreatePolygonFace(efg);
List <MLinearEdge> abef = new List <MLinearEdge>();
abef.Add(ab);
abef.Add(ae);
abef.Add(ef);
abef.Add(bf);
mesh.CreatePolygonFace(abef);
List <MLinearEdge> bcfg = new List <MLinearEdge>();
bcfg.Add(bc);
bcfg.Add(bf);
bcfg.Add(fg);
bcfg.Add(cg);
mesh.CreatePolygonFace(bcfg);
List <MLinearEdge> cage = new List <MLinearEdge>();
cage.Add(ca);
cage.Add(cg);
cage.Add(ge);
cage.Add(ae);
mesh.CreatePolygonFace(cage);
return(mesh);
}
// 针对导入模型的初始化
public MObject(GameObject template, string filename)
{
this.template = template;
gameObject = GameObject.Instantiate(template);
mesh = new MMesh();
using(StreamReader sr = new StreamReader(MDefinitions.SAVE_PATH + "/" + filename))
{
string line = sr.ReadLine();
string[] lineComponent;
bool parseLine;
while (line!=null)
{
lineComponent = line.Split(' ');
string type = lineComponent[0];
parseLine = true;
switch (type)
{
case "p":
float x = (float)Convert.ToDouble(lineComponent[1]);
float y = (float)Convert.ToDouble(lineComponent[2]);
float z = (float)Convert.ToDouble(lineComponent[3]);
Vector3 position = new Vector3(x, y, z);
mesh.CreatePoint(position);
break;
case "le":
int start = Convert.ToInt32(lineComponent[1]);
int end = Convert.ToInt32(lineComponent[2]);
List<MPoint> pointList = mesh.pointList;
mesh.CreateLinearEdge(pointList[start], pointList[end]);
break;
case "ce":
int center = Convert.ToInt32(lineComponent[1]);
float radius = (float)Convert.ToDouble(lineComponent[2]);
Vector3 normal = new Vector3(
(float)Convert.ToDouble(lineComponent[3]),
(float)Convert.ToDouble(lineComponent[4]),
(float)Convert.ToDouble(lineComponent[5]));
mesh.CreateCurveEdge(mesh.pointList[center], radius, normal);
break;
case "ge":
List<Vector3> points = new List<Vector3>();
line = sr.ReadLine();
while (line != null)
{
lineComponent = line.Split(' ');
if(lineComponent[0] != "v")
{
parseLine = false;
break;
}
else
{
points.Add(new Vector3(
(float)Convert.ToDouble(lineComponent[1]),
(float)Convert.ToDouble(lineComponent[2]),
(float)Convert.ToDouble(lineComponent[3])));
}
line = sr.ReadLine();
}
mesh.CreateGeneralEdge(points);
break;
case "polyf":
List<MLinearEdge> edgeList = new List<MLinearEdge>();
line = sr.ReadLine();
while (line != null)
{
lineComponent = line.Split(' ');
if (lineComponent[0] != "e")
{
parseLine = false;
break;
}
else
{
int index = Convert.ToInt32(lineComponent[1]);
edgeList.Add((MLinearEdge)mesh.edgeList[index]);
}
line = sr.ReadLine();
}
mesh.CreatePolygonFace(edgeList);
break;
case "circf":
int circle = Convert.ToInt32(lineComponent[1]);
mesh.CreateCircleFace((MCurveEdge)mesh.edgeList[circle]);
break;
case "conf":
int top = Convert.ToInt32(lineComponent[1]);
int bottom = Convert.ToInt32(lineComponent[2]);
mesh.CreateConeFace(mesh.pointList[top], (MCurveEdge)mesh.edgeList[bottom]);
break;
case "cylf":
top = Convert.ToInt32(lineComponent[1]);
bottom = Convert.ToInt32(lineComponent[2]);
mesh.CreateCylinderFace((MCurveEdge)mesh.edgeList[top], (MCurveEdge)mesh.edgeList[bottom]);
break;
case "sf":
center = Convert.ToInt32(lineComponent[1]);
radius = (float)Convert.ToDouble(lineComponent[2]);
mesh.CreateSphereFace(mesh.pointList[center], radius);
break;
case "gff":
points = new List<Vector3>();
line = sr.ReadLine();
while (line != null)
{
lineComponent = line.Split(' ');
if (lineComponent[0] != "v")
{
parseLine = false;
break;
}
else
{
points.Add(new Vector3(
(float)Convert.ToDouble(lineComponent[1]),
(float)Convert.ToDouble(lineComponent[2]),
(float)Convert.ToDouble(lineComponent[3])));
}
line = sr.ReadLine();
}
mesh.CreateGeneralFlatFace(points);
break;
case "gcf":
List<Vector3> vertices = new List<Vector3>();
line = sr.ReadLine();
while (line != null)
{
lineComponent = line.Split(' ');
if (lineComponent[0] != "v")
{
parseLine = false;
break;
}
else
{
vertices.Add(new Vector3(
(float)Convert.ToDouble(lineComponent[1]),
(float)Convert.ToDouble(lineComponent[2]),
(float)Convert.ToDouble(lineComponent[3])));
}
line = sr.ReadLine();
}
List<int> triangles = new List<int>();
if (!parseLine) line = sr.ReadLine();
while (line != null)
{
lineComponent = line.Split(' ');
if (lineComponent[0] != "f")
{
parseLine = false;
break;
}
else
{
triangles.Add(Convert.ToInt32(lineComponent[1]));
triangles.Add(Convert.ToInt32(lineComponent[2]));
triangles.Add(Convert.ToInt32(lineComponent[3]));
}
line = sr.ReadLine();
}
Mesh m = new Mesh();
m.vertices = vertices.ToArray();
m.triangles = triangles.ToArray();
m.RecalculateNormals();
mesh.CreateGeneralCurveFace(m);
break;
}
if(parseLine)line = sr.ReadLine();
}
sr.Close();
}
InitObject();
}
public List<MObject> PlaneSplit(Vector3 normal, Vector3 planePoint)
{
normal = worldToLocalMatrix.MultiplyVector(normal).normalized;
planePoint = worldToLocalMatrix.MultiplyPoint(planePoint);
MMesh mesh1 = new MMesh();
MMesh mesh2 = new MMesh();
foreach(MPoint p in mesh.pointList)
{
int r = MHelperFunctions.FloatZero(Vector3.Dot(p.position - planePoint, normal));
if(r == 0)
{
mesh1.CreatePoint(p.position);
mesh2.CreatePoint(p.position);
}
else if(r > 0)
{
mesh1.CreatePoint(p.position);
}
else
{
mesh2.CreatePoint(p.position);
}
}
Dictionary<MEdge, List<MEdge>> edgeMap = new Dictionary<MEdge, List<MEdge>>();
List<MFace> facesNeedSplit = new List<MFace>();
foreach(MEdge edge in mesh.edgeList)
{
switch (edge.edgeType)
{
case MEdge.MEdgeType.LINEAR:
{
MLinearEdge le = edge as MLinearEdge;
Vector3 v1 = le.start.position - MHelperFunctions.PointProjectionInFace(le.start.position, normal, planePoint);
Vector3 v2 = le.end.position - MHelperFunctions.PointProjectionInFace(le.end.position, normal, planePoint);
int r1 = MHelperFunctions.FloatZero(Vector3.Dot(v1, normal));
int r2 = MHelperFunctions.FloatZero(Vector3.Dot(v2, normal));
if (r1 == 0 && r2 == 0)
{
mesh1.CreateLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position));
mesh2.CreateLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position));
}
else if (r1 >= 0 && r2 >= 0)
{
mesh1.CreateLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position));
}
else if (r1 <= 0 && r2 <= 0)
{
mesh2.CreateLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position));
}
else
{
foreach (MFace face in le.faces)
{
if(!facesNeedSplit.Contains(face))facesNeedSplit.Add(face);
}
List<MEdge> edgeList = new List<MEdge>();
Vector3 v = (le.end.position - le.start.position).normalized * v1.magnitude / (v1.magnitude + v2.magnitude) + le.start.position;
if (r1 > 0)
{
edgeList.Add(mesh1.CreateLinearEdge(new MPoint(le.start.position), new MPoint(v)));
edgeList.Add(mesh2.CreateLinearEdge(new MPoint(v), new MPoint(le.end.position)));
}
else
{
edgeList.Add(mesh1.CreateLinearEdge(new MPoint(le.end.position), new MPoint(v)));
edgeList.Add(mesh2.CreateLinearEdge(new MPoint(v), new MPoint(le.start.position)));
}
if(edgeList.Count == 2)edgeMap.Add(le, edgeList);
}
break;
}
case MEdge.MEdgeType.CURVE:
{
MCurveEdge ce = edge as MCurveEdge;
int r = MHelperFunctions.FloatZero(Vector3.Dot(ce.center.position - planePoint, normal));
if (MHelperFunctions.Parallel(normal, ce.normal))
{
if (r == 0)
{
mesh1.CreateCurveEdge(ce.center, ce.radius, ce.normal);
mesh2.CreateCurveEdge(ce.center, ce.radius, ce.normal);
}
else if (r > 0)
{
mesh1.CreateCurveEdge(ce.center, ce.radius, ce.normal);
}
else
{
mesh2.CreateCurveEdge(ce.center, ce.radius, ce.normal);
}
}
else
{
float sin = Vector3.Cross(normal.normalized, ce.normal.normalized).magnitude;
float h = MHelperFunctions.DistanceP2F(ce.center.position, normal, planePoint);
float thresh = h / ce.radius;
if (sin <= thresh) //不相交
{
if (r > 0)
{
mesh1.CreateCurveEdge(ce.center, ce.radius, ce.normal);
}
else
{
mesh2.CreateCurveEdge(ce.center, ce.radius, ce.normal);
}
}
else //相交
{
foreach (MFace face in ce.faces)
{
facesNeedSplit.Add(face);
}
Vector3 p;
Vector3 centerProjection = MHelperFunctions.PointProjectionInFace(ce.center.position, normal, planePoint);
if (!MHelperFunctions.Perpendicular(ce.normal, normal))
{
Vector3 intersection = MHelperFunctions.IntersectionLineWithFace(ce.normal, ce.center.position, normal, planePoint);
p = (centerProjection - intersection).normalized * (h * h / Vector3.Distance(centerProjection, intersection)) + centerProjection;
}
else
{
p = centerProjection;
}
Vector3 n = Vector3.Cross(normal, ce.normal).normalized;
float l = Vector3.Distance(p, ce.center.position);
float d = Mathf.Sqrt(ce.radius * ce.radius - l * l);
Vector3 secp1 = p + n * d;
Vector3 secp2 = p - n * d;
List<MEdge> edgeList = new List<MEdge>();
List<Vector3> points1 = MHelperFunctions.GenerateArcPoint(secp1, secp2, ce.normal, ce.center.position);
List<Vector3> points2 = MHelperFunctions.GenerateArcPoint(secp2, secp1, ce.normal, ce.center.position);
int count1 = points1.Count;
int count2 = points2.Count;
Vector3 sample = count1 >= count2 ? points1[count1/2] : points2[count2/2];
r = MHelperFunctions.FloatZero(Vector3.Dot(sample, normal));
if((r > 0 && points1.Count >= points2.Count) || (r < 0 && points1.Count < points2.Count))
{
edgeList.Add(mesh1.CreateGeneralEdge(points1));
edgeList.Add(mesh2.CreateGeneralEdge(points2));
}
else
{
edgeList.Add(mesh1.CreateGeneralEdge(points2));
edgeList.Add(mesh2.CreateGeneralEdge(points1));
}
edgeMap.Add(ce, edgeList);
}
}
break;
}
case MEdge.MEdgeType.GENERAL:
{
MGeneralEdge ge = edge as MGeneralEdge;
Vector3 p;
int r;
int topHalf = 0;
int count = ge.points.Count;
List<Vector3> points = new List<Vector3>();
for(int i = 0; i < count; i++)
{
p = ge.points[i];
r = MHelperFunctions.FloatZero(Vector3.Dot(p - planePoint, normal));
if(topHalf != 0)
{
if(r > 0 && topHalf < 0)
{
Vector3 intersection = MHelperFunctions.IntersectionLineWithFace(p - ge.points[i - 1], p, normal, planePoint);
points.Add(intersection);
mesh2.CreateGeneralEdge(points);
points = new List<Vector3>();
points.Add(intersection);
topHalf = 1;
} else if(r < 0 && topHalf > 0)
{
Vector3 intersection = MHelperFunctions.IntersectionLineWithFace(p - ge.points[i - 1], p, normal, planePoint);
points.Add(intersection);
mesh1.CreateGeneralEdge(points);
points = new List<Vector3>();
points.Add(intersection);
topHalf = -1;
}
}
else
{
topHalf = r;
}
points.Add(p);
}
if(points.Count > 1)
{
if(topHalf > 0)
{
mesh1.CreateGeneralEdge(points);
}
else
{
mesh2.CreateGeneralEdge(points);
}
}
break;
}
}
}
List<List<Vector3>> splitPoints = new List<List<Vector3>>();
Dictionary<Vector3, List<KeyValuePair<Vector3, int>>> splitGraph = new Dictionary<Vector3, List<KeyValuePair<Vector3, int>>>();
foreach(MFace face in mesh.faceList)
{
switch (face.faceType)
{
case MFace.MFaceType.CIRCLE:
{
MCircleFace cirf = face as MCircleFace;
if (facesNeedSplit.Contains(cirf))
{
List<MEdge> edges;
if (!edgeMap.TryGetValue(cirf.circle, out edges)) break;
List<Vector3> points1 = new List<Vector3>(((MGeneralEdge)edges[0]).points);
List<Vector3> points2 = new List<Vector3>(((MGeneralEdge)edges[1]).points);
List<Vector3> split = new List<Vector3>();
split.Add(points1[0]);
split.Add(points2[0]);
int count = splitPoints.Count;
splitPoints.Add(split);
MHelperFunctions.AddValToDictionary(splitGraph, points1[0], points2[0], count);
MHelperFunctions.AddValToDictionary(splitGraph, points2[0], points1[0], count);
mesh1.CreateLinearEdge(new MPoint(points1[0]), new MPoint(points2[0]));
mesh2.CreateLinearEdge(new MPoint(points1[0]), new MPoint(points2[0]));
points1.Add(points1[0]);
points2.Add(points2[0]);
mesh1.CreateGeneralFlatFace(points1);
mesh2.CreateGeneralFlatFace(points2);
}
else
{
int r = MHelperFunctions.FloatZero(Vector3.Dot(cirf.circle.center.position - planePoint, normal));
if(r == 0)
{
mesh1.CreateCircleFace(new MCurveEdge(new MPoint(cirf.circle.center.position), cirf.circle.normal, cirf.circle.radius));
mesh2.CreateCircleFace(new MCurveEdge(new MPoint(cirf.circle.center.position), cirf.circle.normal, cirf.circle.radius));
} else if(r > 0)
{
mesh1.CreateCircleFace(new MCurveEdge(new MPoint(cirf.circle.center.position), cirf.circle.normal, cirf.circle.radius));
} else
{
mesh2.CreateCircleFace(new MCurveEdge(new MPoint(cirf.circle.center.position), cirf.circle.normal, cirf.circle.radius));
}
}
break;
}
case MFace.MFaceType.CONE:
case MFace.MFaceType.CYLINDER:
case MFace.MFaceType.GENERAL_CURVE:
{
List<List<Vector3>> split;
List<Mesh> meshs = MHelperFunctions.MeshSplit(face.mesh, normal, planePoint, out split);
mesh1.CreateGeneralCurveFace(meshs[0]);
mesh2.CreateGeneralCurveFace(meshs[1]);
foreach(List<Vector3> l in split)
{
if(l.Count < 2)
{
Debug.Log("unexpected list count");
continue;
}
if(MHelperFunctions.BlurEqual(l[0], l[l.Count - 1]))
{
mesh1.CreateGeneralFlatFace(l);
mesh2.CreateGeneralFlatFace(l);
}
else
{
int count = splitPoints.Count;
splitPoints.Add(l);
MHelperFunctions.AddValToDictionary(splitGraph, l[0], l[l.Count - 1], count);
MHelperFunctions.AddValToDictionary(splitGraph, l[l.Count - 1],l[0], count);
}
if (MHelperFunctions.PointsInLine(l))
{
mesh1.CreateLinearEdge(new MPoint(l[0]), new MPoint(l[l.Count - 1]));
mesh2.CreateLinearEdge(new MPoint(l[0]), new MPoint(l[l.Count - 1]));
}
else
{
mesh1.CreateGeneralEdge(new List<Vector3>(l));
mesh2.CreateGeneralEdge(new List<Vector3>(l));
}
}
break;
}
case MFace.MFaceType.SPHERE:
{
MSphereFace sf = face as MSphereFace;
List<List<Vector3>> split;
List<Mesh> meshs = MHelperFunctions.MeshSplit(face.mesh, normal, planePoint, out split);
mesh1.CreateGeneralCurveFace(meshs[0]);
mesh2.CreateGeneralCurveFace(meshs[1]);
Vector3 projCenter = MHelperFunctions.PointProjectionInFace(sf.center.position, normal, planePoint);
float dis = Vector3.Distance(sf.center.position, projCenter);
if(dis < sf.radius)
{
float r = Mathf.Sqrt(sf.radius * sf.radius - dis * dis);
MCurveEdge ce = mesh1.CreateCurveEdge(new MPoint(projCenter), r, normal);
mesh1.CreateCircleFace(ce);
ce = mesh2.CreateCurveEdge(new MPoint(projCenter), r, normal);
mesh2.CreateCircleFace(ce);
}
break;
}
case MFace.MFaceType.POLYGON:
{
MPolygonFace polyf = face as MPolygonFace;
if (facesNeedSplit.Contains(polyf))
{
List<MEdge> edges;
List<MLinearEdge> edges1 = new List<MLinearEdge>();
List<MLinearEdge> edges2 = new List<MLinearEdge>();
List<Vector3> split = new List<Vector3>();
foreach(MLinearEdge edge in polyf.edgeList)
{
if(edgeMap.TryGetValue(edge, out edges))
{
MLinearEdge le = edges[0] as MLinearEdge;
edges1.Add(new MLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position)));
split.Add(le.end.position);
le = edges[1] as MLinearEdge;
edges2.Add(new MLinearEdge(new MPoint(le.start.position), new MPoint(le.end.position)));
}
else
{
int r1 = MHelperFunctions.FloatZero(Vector3.Dot(edge.start.position - planePoint, normal));
int r2 = MHelperFunctions.FloatZero(Vector3.Dot(edge.end.position - planePoint, normal));
if (r1 == 0 && r2 == 0)
{
edges1.Add(new MLinearEdge(new MPoint(edge.start.position), new MPoint(edge.end.position)));
edges2.Add(new MLinearEdge(new MPoint(edge.start.position), new MPoint(edge.end.position)));
} else if(r1 >= 0 && r2 >= 0)
{
edges1.Add(new MLinearEdge(new MPoint(edge.start.position), new MPoint(edge.end.position)));
} else if(r1 <= 0 && r2 <= 0)
{
edges2.Add(new MLinearEdge(new MPoint(edge.start.position), new MPoint(edge.end.position)));
}
else
{
Debug.Log("r1: " + r1 + ", r2: " + r2);
}
}
}
if(split.Count != 2)
{
// TODO: 非凸多边形 被分割成了大于2个面
Debug.Log("unexpected split count");
continue;
}
else
{
edges1.Add(new MLinearEdge(new MPoint(split[0]), new MPoint(split[1])));
edges2.Add(new MLinearEdge(new MPoint(split[0]), new MPoint(split[1])));
}
int count = splitPoints.Count;
splitPoints.Add(split);
MHelperFunctions.AddValToDictionary(splitGraph, split[0], split[1], count);
MHelperFunctions.AddValToDictionary(splitGraph, split[1], split[0], count);
mesh1.CreatePolygonFace(edges1);
mesh2.CreatePolygonFace(edges2);
}
else
{
int r = MHelperFunctions.FloatZero(Vector3.Dot(polyf.edgeList[0].start.position - planePoint, normal));
if (r == 0)
{
List<MLinearEdge> edges1 = new List<MLinearEdge>();
List<MLinearEdge> edges2 = new List<MLinearEdge>();
foreach(MLinearEdge e in polyf.edgeList)
{
edges1.Add(new MLinearEdge(new MPoint(e.start.position), new MPoint(e.end.position)));
edges2.Add(new MLinearEdge(new MPoint(e.start.position), new MPoint(e.end.position)));
}
mesh1.CreatePolygonFace(edges1);
mesh2.CreatePolygonFace(edges2);
}
else
{
List<MLinearEdge> edges = new List<MLinearEdge>();
foreach (MLinearEdge e in polyf.edgeList)
{
edges.Add(new MLinearEdge(new MPoint(e.start.position), new MPoint(e.end.position)));
}
if(r > 0)
{
mesh1.CreatePolygonFace(edges);
}
else
{
mesh2.CreatePolygonFace(edges);
}
}
}
break;
}
case MFace.MFaceType.GENERAL_FLAT:
{
MGeneralFlatFace gff = face as MGeneralFlatFace;
List<Vector3> points1 = new List<Vector3>();
List<Vector3> points2 = new List<Vector3>();
List<Vector3> split = new List<Vector3>();
Vector3 p;
int lastr = 0;
int r;
int count = gff.points.Count;
for (int i = 0; i < count; i++)
{
p = gff.points[i];
r = MHelperFunctions.FloatZero(Vector3.Dot(p - planePoint, normal));
if(lastr >= 0 && r >= 0)
{
points1.Add(p);
} else if(lastr <= 0 && r <= 0)
{
points2.Add(p);
}
else
{
Vector3 intersect = MHelperFunctions.IntersectionLineWithFace(p - gff.points[i - 1], p, normal, planePoint);
split.Add(intersect);
points1.Add(intersect);
points2.Add(intersect);
if(r > 0)
{
points1.Add(p);
}
else
{
points2.Add(p);
}
}
lastr = r;
}
if (split.Count != 2)
{
// TODO: 非凸多边形 被分割成了大于2个面
Debug.Log("unexpected split count");
continue;
}
else
{
mesh1.CreateLinearEdge(new MPoint(split[0]), new MPoint(split[1]));
mesh2.CreateLinearEdge(new MPoint(split[0]), new MPoint(split[1]));
}
int cnt = splitPoints.Count;
splitPoints.Add(split);
MHelperFunctions.AddValToDictionary(splitGraph, split[0], split[1], cnt);
MHelperFunctions.AddValToDictionary(splitGraph, split[1], split[0], cnt);
mesh1.CreateGeneralFlatFace(points1);
mesh2.CreateGeneralFlatFace(points2);
break;
}
}
}
List<List<Vector3>> loops = MHelperFunctions.GroupLoop(splitGraph, splitPoints);
foreach(List<Vector3> list in loops)
{
mesh1.CreateGeneralFlatFace(list);
mesh2.CreateGeneralFlatFace(list);
}
List<MObject> objects = new List<MObject>();
if (!mesh1.IsEmpty())
{
MObject obj = new MObject(template, mesh1);
obj.transform.position = transform.position;
obj.transform.rotation = transform.rotation;
obj.transform.localScale = transform.localScale;
objects.Add(obj);
}
if (!mesh2.IsEmpty())
{
MObject obj = new MObject(template, mesh2);
obj.transform.position = transform.position;
obj.transform.rotation = transform.rotation;
obj.transform.localScale = transform.localScale;
objects.Add(obj);
}
return objects;
}
public void CreatePoint(Vector3 localSpacePos)
{
mesh.CreatePoint(localSpacePos);
}
public static MMesh GetMMesh()
{
mesh = new MMesh();
MPoint a = mesh.CreatePoint(new Vector3(-0.5f, -0.5f, -0.5f));
MPoint b = mesh.CreatePoint(new Vector3(-0.5f, -0.5f, 0.5f));
MPoint c = mesh.CreatePoint(new Vector3(0.5f, -0.5f, 0.5f));
MPoint d = mesh.CreatePoint(new Vector3(0.5f, -0.5f, -0.5f));
MPoint e = mesh.CreatePoint(new Vector3(-0.5f, 0.5f, -0.5f));
MPoint f = mesh.CreatePoint(new Vector3(-0.5f, 0.5f, 0.5f));
MPoint g = mesh.CreatePoint(new Vector3(0.5f, 0.5f, 0.5f));
MPoint h = mesh.CreatePoint(new Vector3(0.5f, 0.5f, -0.5f));
MLinearEdge ab = mesh.CreateLinearEdge(a, b);
MLinearEdge bc = mesh.CreateLinearEdge(b, c);
MLinearEdge cd = mesh.CreateLinearEdge(c, d);
MLinearEdge da = mesh.CreateLinearEdge(d, a);
MLinearEdge ef = mesh.CreateLinearEdge(e, f);
MLinearEdge fg = mesh.CreateLinearEdge(f, g);
MLinearEdge gh = mesh.CreateLinearEdge(g, h);
MLinearEdge he = mesh.CreateLinearEdge(h, e);
MLinearEdge ae = mesh.CreateLinearEdge(a, e);
MLinearEdge bf = mesh.CreateLinearEdge(b, f);
MLinearEdge cg = mesh.CreateLinearEdge(c, g);
MLinearEdge dh = mesh.CreateLinearEdge(d, h);
List <MLinearEdge> abcd = new List <MLinearEdge>();
abcd.Add(ab);
abcd.Add(bc);
abcd.Add(cd);
abcd.Add(da);
mesh.CreatePolygonFace(abcd);
List <MLinearEdge> efgh = new List <MLinearEdge>();
efgh.Add(ef);
efgh.Add(fg);
efgh.Add(gh);
efgh.Add(he);
mesh.CreatePolygonFace(efgh);
List <MLinearEdge> abef = new List <MLinearEdge>();
abef.Add(ab);
abef.Add(ef);
abef.Add(ae);
abef.Add(bf);
mesh.CreatePolygonFace(abef);
List <MLinearEdge> bcfg = new List <MLinearEdge>();
bcfg.Add(bc);
bcfg.Add(fg);
bcfg.Add(bf);
bcfg.Add(cg);
mesh.CreatePolygonFace(bcfg);
List <MLinearEdge> cdgh = new List <MLinearEdge>();
cdgh.Add(cd);
cdgh.Add(gh);
cdgh.Add(cg);
cdgh.Add(dh);
mesh.CreatePolygonFace(cdgh);
List <MLinearEdge> dahe = new List <MLinearEdge>();
dahe.Add(da);
dahe.Add(he);
dahe.Add(dh);
dahe.Add(ae);
mesh.CreatePolygonFace(dahe);
return(mesh);
}