/// <summary>
/// Prepare a detector for live assay/HV by adding it to the active list.
/// </summary>
/// <param name="det"></param>
public static void ActivateDetector(Detector det)
{
if (det.Id.SRType.IsSocketBasedLM())
{
if (det.Id.SRType == InstrType.LMMM)
{
LMInstrument lm = new LMInstrument(det);
lm.DAQState = DAQInstrState.Offline;
lm.selected = false; //must broadcast first to get it selected
if (!Instruments.All.Contains(lm))
{
Instruments.All.Add(lm); // add to global runtime list
}
}
else if (det.Id.SRType == InstrType.MCA527)
{
MCA527Instrument mca = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
mca.DAQState = DAQInstrState.Offline;
mca.selected = true;
if (!Instruments.Active.Contains(mca))
{
Instruments.Active.Add(mca);
}
}
else
{
// LMMM and MCA-527 are the only socket-based devices supported
}
}
else if (det.Id.SRType.IsUSBBasedLM())
{
Ptr32Instrument ptr = new Ptr32Instrument(det);
ptr.RDT.ResetRawDataBuffer(); // poor design recovery patch
ptr.RDT.SetLMStateFlags(((LMConnectionInfo)(ptr.id.FullConnInfo)).NetComm);
ptr.DAQState = DAQInstrState.Offline; // USB-based devices are manually initiated as opposed to auto-pickup
if (!Instruments.All.Contains(ptr))
{
Instruments.All.Add(ptr); // add to global runtime list
}
}
}
/// <summary>
/// Prepare a detector for live assay/HV by adding it to the active list.
/// </summary>
/// <param name="det"></param>
public static void ActivateDetector(Detector det)
{
if (det.Id.SRType.IsSocketBasedLM())
{
if (det.Id.SRType == InstrType.LMMM)
{
LMInstrument lm = new LMInstrument(det);
lm.DAQState = DAQInstrState.Offline;
lm.selected = false; //must broadcast first to get it selected
if (!Instruments.All.Contains(lm))
{
Instruments.All.Add(lm); // add to global runtime list
}
}
else if (det.Id.SRType == InstrType.MCA527)
{
MCA527Instrument mca = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
mca.DAQState = DAQInstrState.Offline;
mca.selected = true;
if (!Instruments.Active.Contains(mca))
{
Instruments.Active.Add(mca);
}
}
else
{
// LMMM and MCA-527 are the only socket-based devices supported
}
}
else if (det.Id.SRType.IsUSBBasedLM())
{
Ptr32Instrument ptr = new Ptr32Instrument(det);
ptr.DAQState = DAQInstrState.Offline; // these are manually initiated as opposed to auto-pickup
if (!Instruments.All.Contains(ptr))
{
Instruments.All.Add(ptr); // add to global runtime list
}
}
}
private void AnalysisWizardClick(object sender, RoutedEventArgs e)
{
AcquireParameters acq = null;
Detector det = null;
NC.App.DB.ResetAcquireParametersMap(); // force read from DB to get as-is default acquire state
// NEXT: do a refresh of the specific acquire instance, not the entire list
Integ.GetCurrentAcquireDetectorPair(ref acq, ref det);
if (!det.ListMode)
{
MessageBox.Show("'" + det.ToString() + "' is not a List Mode detector,\r\ncreate or select a List Mode detector\r\n with Setup > Facility/Inspection...", "List Mode Acquire");
return;
}
LMAcquire a = new LMAcquire(acq, det);
a.ShowDialog();
if (a.DialogResult == System.Windows.Forms.DialogResult.OK)
{
if (acq.modified || acq.lm.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, DateTime.Now);
acq.MeasDateTime = sel.TimeStamp; acq.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, acq); // it's a new one, not the existing one modified
}
switch (NC.App.Opstate.Measurement.AcquireState.data_src) // global access to latest acq here, same as acq set in wizard
{
case ConstructedSource.Live:
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (NC.App.Opstate.Measurement.Detector.ListMode)
{
// if ok, the analyzers are set up, so can kick it off now.
if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.PTR32)
{
Ptr32Instrument instrument = new Ptr32Instrument(NC.App.Opstate.Measurement.Detector);
instrument.DAQState = DAQInstrState.Offline;
instrument.selected = true;
instrument.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis)); // redundant now
instrument.RDT.ResetRawDataBuffer();
instrument.RDT.SetLMStateFlags(((LMConnectionInfo)(instrument.id.FullConnInfo)).NetComm);
if (!Instruments.Active.Contains(instrument))
{
Instruments.Active.Add(instrument);
}
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.MCA527)
{
MCA527Instrument mca = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
mca.DAQState = DAQInstrState.Offline; // these are manually initiated as opposed to auto-pickup
mca.selected = true;
mca.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis)); // redundant now?
if (!Instruments.Active.Contains(mca))
{
Instruments.Active.Add(mca);
}
}
else // LMMM
{
LMInstrument lm = new LMInstrument(NC.App.Opstate.Measurement.Detector);
lm.DAQState = DAQInstrState.Offline; // these are manually initiated as opposed to auto-pickup
lm.selected = false; //must broadcast first to get it selected
if (!Instruments.All.Contains(lm))
{
Instruments.All.Add(lm); // add to global runtime list
}
}
}
else
{
SRInstrument sri = new SRInstrument(NC.App.Opstate.Measurement.Detector);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
{
Instruments.All.Add(sri); // add to global runtime list
}
}
break;
case ConstructedSource.DB:
UIIntegration.Controller.file = true;
return;
//break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
return;
//break;
case ConstructedSource.CycleFile:
case ConstructedSource.ReviewFile:
UIIntegration.Controller.file = true;
string xs = UIIntegration.GetUsersFolder("Select Input Folder", NC.App.AppContext.FileInput);
if (!string.IsNullOrEmpty(xs))
{
NC.App.AppContext.FileInput = xs;
NC.App.AppContext.FileInputList = null; // no explicit file list
}
SRInstrument sri2 = new SRInstrument(NC.App.Opstate.Measurement.Detector);
sri2.selected = true;
sri2.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri2))
{
Instruments.All.Add(sri2); // add to global runtime list
}
break;
case ConstructedSource.NCDFile:
NC.App.AppContext.NCDFileAssay = true; // suntoucher, this is right here how we're flowing now
UIIntegration.Controller.file = true;
break;
case ConstructedSource.SortedPulseTextFile:
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
break;
case ConstructedSource.PTRFile:
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
break;
case ConstructedSource.MCA527File:
NC.App.AppContext.MCA527FileAssay = true;
UIIntegration.Controller.file = true;
break;
default:
break;
}
NC.App.Opstate.Measurement.Detector.Id.source = NC.App.Opstate.Measurement.AcquireState.data_src; // set the detector overall data source value here
UIIntegration.Controller.SetAssay(); // tell the controller to do an assay operation using the current measurement state
UIIntegration.Controller.Perform(); // start the measurement file or DAQ thread
}
}
private void OKBtn_Click(object sender, EventArgs e)
{
if (hvp.modified)
{
DialogResult = DialogResult.OK;
HVCalibrationParameters c = NC.App.DB.HVParameters.Get(det.Id.DetectorName);
if (c != null)
{
c.Copy(hvp); // copy changes back to original on user affirmation
}
else
{
c = hvp;
NC.App.DB.HVParameters.GetMap().Add(det, c);
}
NC.App.DB.HVParameters.Set(det, c);
// dev note: LM HV vals on LM Acquire record, but SR uses separate DB table so move HV vals so unify the scheme
}
else
{
DialogResult = DialogResult.Ignore;
}
acq.data_src = ConstructedSource.Live;
if (OpenInExcel.Checked != acq.lm.HVX)
{
acq.lm.HVX = OpenInExcel.Checked;
NC.App.DB.UpdateAcquireParams(acq, det.ListMode);
}
// The acquire is set to occur, build up the measurement state
Integ.BuildMeasurement(acq, det, AssaySelector.MeasurementOption.unspecified);
NC.App.Opstate.Measurement.Detector.Id.source = ConstructedSource.Live;
if (acq.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, DateTime.Now);
acq.MeasDateTime = sel.TimeStamp; acq.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, acq); // it's a new one, not the existing one modified
}
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
Instrument instrument = null;
if (NC.App.Opstate.Measurement.Detector.ListMode)
{
if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.PTR32)
{
instrument = new Ptr32Instrument(NC.App.Opstate.Measurement.Detector);
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.MCA527)
{
instrument = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
((Analysis.MCA527ProcessingState)instrument.RDT.State).writingFile = false; // force this
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.LMMM)
{
instrument = new LMInstrument(NC.App.Opstate.Measurement.Detector);
}
instrument.DAQState = DAQInstrState.Offline;
instrument.selected = true;
instrument.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.Active.Exists(i => instrument.id.Equals(i.id)))
{
Instruments.Active.Add(instrument);
}
}
else
{
instrument = new SRInstrument(NC.App.Opstate.Measurement.Detector);
instrument.selected = true;
instrument.Init(null, null);
if (!Instruments.Active.Exists(i => instrument.id.Equals(i)))
{
Instruments.All.Add(instrument); // add to global runtime list
}
}
UIIntegration.Controller.SetHVCalib(); // tell the controller to do an HV operation using the current measurement state
UIIntegration.Controller.Perform(); // start the HV DAQ thread
Close();
}
private void OKBtn_Click(object sender, EventArgs e)
{
if (hvp.modified)
{
DialogResult = DialogResult.OK;
HVCalibrationParameters c = NC.App.DB.HVParameters.Get(det.Id.DetectorName);
if (c != null)
c.Copy(hvp); // copy changes back to original on user affirmation
else
{
c = hvp;
NC.App.DB.HVParameters.GetMap().Add(det, c);
}
NC.App.DB.HVParameters.Set(det,c);
// dev note: LM HV vals on LM Acquire record, but SR uses separate DB table so move HV vals so unify the scheme
}
else
DialogResult = DialogResult.Ignore;
acq.data_src = ConstructedSource.Live;
if (OpenInExcel.Checked != acq.lm.HVX)
{
acq.lm.HVX = OpenInExcel.Checked;
NC.App.DB.UpdateAcquireParams(acq, det.ListMode);
}
// The acquire is set to occur, build up the measurement state
Integ.BuildMeasurement(acq, det, AssaySelector.MeasurementOption.unspecified);
NC.App.Opstate.Measurement.Detector.Id.source = ConstructedSource.Live;
if (acq.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, DateTime.Now);
acq.MeasDateTime = sel.TimeStamp; acq.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, acq); // it's a new one, not the existing one modified
}
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
Instrument instrument = null;
if (NC.App.Opstate.Measurement.Detector.ListMode)
{
if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.PTR32)
{
instrument = new Ptr32Instrument(NC.App.Opstate.Measurement.Detector);
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.MCA527)
{
instrument = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
((Analysis.MCA527ProcessingState)instrument.RDT.State).writingFile = false; // force this
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.LMMM)
{
instrument = new LMInstrument(NC.App.Opstate.Measurement.Detector);
}
instrument.DAQState = DAQInstrState.Offline;
instrument.selected = true;
instrument.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.Active.Exists(i => instrument.id.Equals(i.id)))
Instruments.Active.Add(instrument);
}
else
{
instrument = new SRInstrument(NC.App.Opstate.Measurement.Detector);
instrument.selected = true;
instrument.Init(null, null);
if (!Instruments.Active.Exists(i => instrument.id.Equals(i)))
Instruments.All.Add(instrument); // add to global runtime list
}
UIIntegration.Controller.SetHVCalib(); // tell the controller to do an HV operation using the current measurement state
UIIntegration.Controller.Perform(); // start the HV DAQ thread
Close();
}
private void AnalysisWizardClick(object sender, RoutedEventArgs e)
{
AcquireParameters acq = null;
Detector det = null;
NC.App.DB.ResetAcquireParametersMap(); // force read from DB to get as-is default acquire state
// NEXT: do a refresh of the specific acquire instance, not the entire list
Integ.GetCurrentAcquireDetectorPair(ref acq, ref det);
if (!det.ListMode)
{
MessageBox.Show("'" + det.ToString() + "' is not a List Mode detector,\r\ncreate or select a List Mode detector\r\n with Setup > Facility/Inspection...", "List Mode Acquire");
return;
}
LMAcquire a = new LMAcquire(acq, det);
a.ShowDialog();
if (a.DialogResult == System.Windows.Forms.DialogResult.OK)
{
if (acq.modified || acq.lm.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, DateTime.Now);
acq.MeasDateTime = sel.TimeStamp; acq.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, acq); // it's a new one, not the existing one modified
}
switch (NC.App.Opstate.Measurement.AcquireState.data_src) // global access to latest acq here, same as acq set in wizard
{
case ConstructedSource.Live:
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (NC.App.Opstate.Measurement.Detector.ListMode)
{
// if ok, the analyzers are set up, so can kick it off now.
if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.PTR32)
{
Ptr32Instrument instrument = new Ptr32Instrument(NC.App.Opstate.Measurement.Detector);
instrument.DAQState = DAQInstrState.Offline;
instrument.selected = true;
instrument.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis)); // redundant now
instrument.RDT.ResetRawDataBuffer();
instrument.RDT.SetLMStateFlags(((LMConnectionInfo)(instrument.id.FullConnInfo)).NetComm);
if (!Instruments.Active.Contains(instrument))
Instruments.Active.Add(instrument);
}
else if (NC.App.Opstate.Measurement.Detector.Id.SRType == InstrType.MCA527)
{
MCA527Instrument mca = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
mca.DAQState = DAQInstrState.Offline; // these are manually initiated as opposed to auto-pickup
mca.selected = true;
mca.Init(NC.App.Logger(LMLoggers.AppSection.Data), NC.App.Logger(LMLoggers.AppSection.Analysis)); // redundant now?
if (!Instruments.Active.Contains(mca))
Instruments.Active.Add(mca);
}
else // LMMM
{
LMInstrument lm = new LMInstrument(NC.App.Opstate.Measurement.Detector);
lm.DAQState = DAQInstrState.Offline; // these are manually initiated as opposed to auto-pickup
lm.selected = false; //must broadcast first to get it selected
if (!Instruments.All.Contains(lm))
Instruments.All.Add(lm); // add to global runtime list
}
}
else
{
SRInstrument sri = new SRInstrument(NC.App.Opstate.Measurement.Detector);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
Instruments.All.Add(sri); // add to global runtime list
}
break;
case ConstructedSource.DB:
UIIntegration.Controller.file = true;
return;
//break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
return;
//break;
case ConstructedSource.CycleFile:
case ConstructedSource.ReviewFile:
UIIntegration.Controller.file = true;
string xs = UIIntegration.GetUsersFolder("Select Input Folder", NC.App.AppContext.FileInput);
if (!string.IsNullOrEmpty(xs))
{
NC.App.AppContext.FileInput = xs;
NC.App.AppContext.FileInputList = null; // no explicit file list
}
SRInstrument sri2 = new SRInstrument(NC.App.Opstate.Measurement.Detector);
sri2.selected = true;
sri2.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri2))
Instruments.All.Add(sri2); // add to global runtime list
break;
case ConstructedSource.NCDFile:
NC.App.AppContext.NCDFileAssay = true; // suntoucher, this is right here how we're flowing now
UIIntegration.Controller.file = true;
break;
case ConstructedSource.SortedPulseTextFile:
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
break;
case ConstructedSource.PTRFile:
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
break;
case ConstructedSource.MCA527File:
NC.App.AppContext.MCA527FileAssay = true;
UIIntegration.Controller.file = true;
break;
default:
break;
}
NC.App.Opstate.Measurement.Detector.Id.source = NC.App.Opstate.Measurement.AcquireState.data_src; // set the detector overall data source value here
UIIntegration.Controller.SetAssay(); // tell the controller to do an assay operation using the current measurement state
UIIntegration.Controller.Perform(); // start the measurement file or DAQ thread
}
}
/// <summary>
/// Prepare a detector for live assay/HV by adding it to the active list.
/// </summary>
/// <param name="det"></param>
public static void ActivateDetector(Detector det)
{
if (det.Id.SRType.IsSocketBasedLM())
{
if (det.Id.SRType == InstrType.LMMM)
{
LMInstrument lm = new LMInstrument(det);
lm.DAQState = DAQInstrState.Offline;
lm.selected = false; //must broadcast first to get it selected
if (!Instruments.All.Contains(lm))
Instruments.All.Add(lm); // add to global runtime list
}
else if (det.Id.SRType == InstrType.MCA527)
{
MCA527Instrument mca = new MCA527Instrument(NC.App.Opstate.Measurement.Detector);
mca.DAQState = DAQInstrState.Offline;
mca.selected = true;
if (!Instruments.Active.Contains(mca))
Instruments.Active.Add(mca);
}
else
{
// LMMM and MCA-527 are the only socket-based devices supported
}
}
else if (det.Id.SRType.IsUSBBasedLM())
{
Ptr32Instrument ptr = new Ptr32Instrument(det);
ptr.RDT.ResetRawDataBuffer(); // poor design recovery patch
ptr.RDT.SetLMStateFlags(((LMConnectionInfo)(ptr.id.FullConnInfo)).NetComm);
ptr.DAQState = DAQInstrState.Offline; // USB-based devices are manually initiated as opposed to auto-pickup
if (!Instruments.All.Contains(ptr))
Instruments.All.Add(ptr); // add to global runtime list
}
}
