public static void filterParam(Element elementEx, Autodesk.Revit.DB.BuiltInCategory Cat, BuiltInParameter param01, BuiltInParameter param02,
BuiltInParameter param03, BuiltInParameter param04, BuiltInParameter param05)
{
string elemParam01 = elementEx.get_Parameter(param01).AsValueString();
string elemParam02 = elementEx.get_Parameter(param02).AsValueString();
string elemParam03 = elementEx.get_Parameter(param03).AsValueString();
string elemParam04 = elementEx.get_Parameter(param04).AsValueString();
string elemParam05 = elementEx.get_Parameter(param05).AsValueString();
FilteredElementCollector viewCollector = new FilteredElementCollector(doc, uidoc.ActiveView.Id);
List <Element> ducts = new FilteredElementCollector(doc, uidoc.ActiveView.Id)
.OfCategory(Cat)
.Where(a => a.get_Parameter(param01).AsValueString() == elemParam01)
.Where(a => a.get_Parameter(param02).AsValueString() == elemParam02)
.Where(a => a.get_Parameter(param03).AsValueString() == elemParam03)
.Where(a => a.get_Parameter(param04).AsValueString() == elemParam04)
.Where(a => a.get_Parameter(param05).AsValueString() == elemParam05)
.ToList();
foreach (Element x in ducts)
{
selectedElements.Add(x);
ListOfElements.Add(x);
}
}
/// <summary>
/// Assing number to element
/// </summary>
/// <param name="element"></param>
/// <param name="partNumber"></param>
public static void AssingPartNumber(Element element, string partNumber)
{
Category category = element.Category;
BuiltInCategory enumCategory = (BuiltInCategory)category.Id.IntegerValue;
List <BuiltInCategory> allBuiltinCategories = FabricationCategories();
if (allBuiltinCategories.Contains(enumCategory))
{
try
{
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ITEM_NUMBER).Set(partNumber);
ListOfElements.Add(element);
ActualCounter = partNumber;
uidoc.RefreshActiveView();
uidoc.Selection.SetElementIds(new List <ElementId>()
{
element.Id
});
}
catch (Exception ex) { MessageBox.Show(ex.Message); }
}
else
{
Guid guid = new Guid("460e0a79-a970-4b03-95f1-ac395c070beb");
element.get_Parameter(guid).Set(partNumber);
ListOfElements.Add(element);
uidoc.Selection.SetElementIds(new List <ElementId>()
{
element.Id
});
}
}
//sortowanie elementów po cena / waga
public void bubblesort(ListOfElements list)
{
bool koniec = false;
ListOfElements pivot = new ListOfElements();
pivot.Add(new Element(0, 0));
for (int i = 0; i < list.Count; i++)
{
koniec = true;
for (int j = 1; j < list.Count; j++)
{
if (list[j - 1].price / list[j - 1].weight < list[j].price / list[j].weight)
{
pivot[0].price = list[j].price;
pivot[0].weight = list[j].weight;
list[j].price = list[j - 1].price;
list[j].weight = list[j - 1].weight;
list[j - 1].price = pivot[0].price;
list[j - 1].weight = pivot[0].weight;
koniec = false;
}
}
if (koniec == true)
break;
}
LOE = list;
}
//sortuje po cenie, od najdrożyszej do najtańszej
public ListOfElements bubblesort_max_price(ListOfElements list)
{
bool koniec = false;
ListOfElements pivot = new ListOfElements();
pivot.Add(new Element(0, 0));
for (int i = 0; i < list.Count; i++)
{
koniec = true;
for (int j = 1; j < list.Count; j++)
{
if (list[j - 1].price < list[j].price)
{
pivot[0] = list[j - 1];
list[j - 1] = list[j];
list[j] = pivot[0];
koniec = false;
}
}
if (koniec == true)
break;
}
return list;
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection(bool duplicated)
{
selectedElements.Clear();
var filterS = new SelectionFilter();
var refElement = uidoc.Selection.PickObject(ObjectType.Element, new SelectionFilter());
if (refElement != null)
{
var element = uidoc.Document.GetElement(refElement);
if (duplicated)
{
selectedElements.AddRange(GetallElementsDuplicated(element));
}
selectedElements.Add(element);
//TODO: check if element is from the right category
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
Color colorSelect = MainForm.ColorSelected;
//Split coloSelect in R,G,B to be transformed to a Revit color later
byte r = colorSelect.R;
byte g = colorSelect.G;
byte b = colorSelect.B;
#if REVIT2020
OverrideElemtColor.Graphics20192020(doc, ref overrideGraphicSettings, r, g, b);
#elif REVIT2019
OverrideElemtColor.Graphics20172020(doc, ref overrideGraphicSettings, r, g, b);
#endif
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
selectedElement = element;
//Add element to the temporary list of selected elemenents
ListOfElements.Add(element);
}
}
//przycisk generujący wszystkie dane
private void button1_Click(object sender, EventArgs e)
{
if (nWeightMax.Value <= 0 || nWeightMin.Value <= 0 || nPriceMax.Value <= 0 || nPriceMin.Value <= 0 || nBackpackSize.Value <= 0 || nNumberOfElements.Value <= 0)
{
lError.Visible = true;
return;
}
if (check_values((int)nWeightMin.Value, (int)nWeightMax.Value))
{
lError.Visible = true;
return;
}
if (check_values((int)nPriceMin.Value, (int)nPriceMax.Value))
{
lError.Visible = true;
return;
}
int copy = 1;
if (nMaxCopyOfElement.Value > 1)
{
copy = (int)nMaxCopyOfElement.Value;
}
lError.Visible = false;
Random rnd = new Random();
for (int i = 0; i < nNumberOfElements.Value; i++)
{
if (list.Count <= 0)
{
list.Clear();
}
list.Add(new Element(rnd.Next((int)nWeightMin.Value, (int)nWeightMax.Value), rnd.Next((int)nPriceMin.Value, (int)nPriceMax.Value), rnd.Next(1, copy)));
}
bWeight.Enabled = true;
bPrice.Enabled = true;
listaWygenerowanychElementówToolStripMenuItem.Enabled = true;
listaPosortowamaCenaWagaToolStripMenuItem.Enabled = true;
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection()
{
selectedElements.Clear();
var filterS = new SelectionFilter();
var refElement = uidoc.Selection.PickObject(Autodesk.Revit.UI.Selection.ObjectType.Element, new SelectionFilter());
if (refElement != null)
{
var element = uidoc.Document.GetElement(refElement);
Category category = element.Category;
BuiltInCategory enumCategory = (BuiltInCategory)category.Id.IntegerValue;
//Check for other rectangular ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_WIDTH_PARAM, BuiltInParameter.RBS_CURVE_HEIGHT_PARAM);
}
//Check for other ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_DuctFitting" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
string elemParam01 = element.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString();
string elemParam02 = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString();
string elemParam03 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString();
string elemParam04 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString();
string elemParam05 = element.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString();
FilteredElementCollector viewCollector = new FilteredElementCollector(doc, uidoc.ActiveView.Id);
List <Element> ducts = new FilteredElementCollector(doc, uidoc.ActiveView.Id)
.OfCategory(Autodesk.Revit.DB.BuiltInCategory.OST_DuctFitting)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString() == elemParam01)
.Where(a => a.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString() == elemParam02)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString() == elemParam03)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString() == elemParam04)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString() == elemParam05)
.ToList();
foreach (Element x in ducts)
{
selectedElements.Add(x);
ListOfElements.Add(x);
}
}
bool boolTest = false;
var familyTypee = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTypee.Contains("Bend"))
{
boolTest = true;
}
bool TapTest = false;
var familyTapType = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTapType.Contains("Tap"))
{
TapTest = true;
}
//Check for other round ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() != null &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_SURFACE_AREA, BuiltInParameter.RBS_CURVE_DIAMETER_PARAM);
}
//Check for other rectangular fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() != "Generic Square Bend" &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
//if (enumCategory.ToString() == "OST_FabricationDuctwork"
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() == "Generic Square Bend"
// )
//{
// filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
// BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
//}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
boolTest == true &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DEPTH_IN, BuiltInParameter.FABRICATION_PART_WIDTH_IN);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DIAMETER_IN, BuiltInParameter.RBS_REFERENCE_OVERALLSIZE);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.FABRICATION_PART_SHEETMETAL_AREA, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest == true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.RBS_REFERENCE_OVERALLSIZE, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
selectedElements.Add(element);
//TODO: check if element is from the right category
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
Color colorSelect = MainForm.ColorSelected;
//Split coloSelect in R,G,B to be transformed to a Revit color later
byte r = colorSelect.R;
byte b = colorSelect.B;
byte g = colorSelect.G;
//Set override properties to fill and line colors
overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(r, g, b));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(r, g, b));
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
selectedElement = element;
//Add element to the temporary list of selected elemenents
ListOfElements.Add(element);
}
}