/// <summary>
/// Constructs a new constraint which restricts one linear degree of freedom between two entities.
/// </summary>
/// <param name="connectionA">First entity of the constraint pair.</param>
/// <param name="connectionB">Second entity of the constraint pair.</param>
/// <param name="planeAnchor">Location of the anchor for the plane to be attached to connectionA in world space.</param>
/// <param name="planeNormal">Normal of the plane constraint in world space.</param>
/// <param name="xAxis">Direction in world space along which the X axis LinearAxisLimit and LinearAxisMotor work.
/// This is usually chosen to be perpendicular to the planeNormal and the yAxis.</param>
/// <param name="yAxis">Direction in world space along which the Y axis LinearAxisLimit and LinearAxisMotor work.
/// This is usually chosen to be perpendicular to the planeNormal and the xAxis.</param>
/// <param name="pointAnchor">Location of the anchor for the point to be attached to connectionB in world space.</param>
public PlaneSliderJoint(Entity connectionA, Entity connectionB, Vector3 planeAnchor, Vector3 planeNormal, Vector3 xAxis, Vector3 yAxis, Vector3 pointAnchor)
{
if (connectionA == null)
{
connectionA = TwoEntityConstraint.WorldEntity;
}
if (connectionB == null)
{
connectionB = TwoEntityConstraint.WorldEntity;
}
PointOnPlaneJoint = new PointOnPlaneJoint(connectionA, connectionB, planeAnchor, planeNormal, pointAnchor);
LimitX = new LinearAxisLimit(connectionA, connectionB, planeAnchor, pointAnchor, xAxis, 0, 0);
MotorX = new LinearAxisMotor(connectionA, connectionB, planeAnchor, pointAnchor, xAxis);
LimitY = new LinearAxisLimit(connectionA, connectionB, planeAnchor, pointAnchor, yAxis, 0, 0);
MotorY = new LinearAxisMotor(connectionA, connectionB, planeAnchor, pointAnchor, yAxis);
LimitX.IsActive = false;
MotorX.IsActive = false;
LimitY.IsActive = false;
MotorY.IsActive = false;
Add(PointOnPlaneJoint);
Add(LimitX);
Add(MotorX);
Add(LimitY);
Add(MotorY);
}
public TreadSegment(Vector3 segmentPosition, Entity body, TreadSegmentDescription treadSegmentDescription)
{
Entity = new Cylinder(segmentPosition, treadSegmentDescription.Width, treadSegmentDescription.Radius, treadSegmentDescription.Mass);
Entity.Material.KineticFriction = treadSegmentDescription.Friction;
Entity.Material.StaticFriction = treadSegmentDescription.Friction;
Entity.Orientation = Quaternion.CreateFromAxisAngle(Vector3.Forward, MathHelper.PiOver2);
//Preventing the occasional pointless collision pair can speed things up.
CollisionRules.AddRule(Entity, body, CollisionRule.NoBroadPhase);
//Connect the wheel to the body.
SuspensionAxisJoint = new PointOnLineJoint(body, Entity, Entity.Position, Vector3.Down, Entity.Position);
SuspensionLengthLimit = new LinearAxisLimit(body, Entity, Entity.Position, Entity.Position, Vector3.Down, -treadSegmentDescription.SuspensionLength, 0);
//This linear axis motor will give the suspension its springiness by pushing the wheels outward.
SuspensionSpring = new LinearAxisMotor(body, Entity, Entity.Position, Entity.Position, Vector3.Down);
SuspensionSpring.Settings.Mode = MotorMode.Servomechanism;
SuspensionSpring.Settings.Servo.Goal = 0;
SuspensionSpring.Settings.Servo.SpringSettings.Stiffness = treadSegmentDescription.SuspensionStiffness;
SuspensionSpring.Settings.Servo.SpringSettings.Damping = treadSegmentDescription.SuspensionDamping;
SuspensionAngularJoint = new RevoluteAngularJoint(body, Entity, Vector3.Right);
//Make the joint extremely rigid. There are going to be extreme conditions when the wheels get up to speed;
//we don't want the forces involved to torque the wheel off the frame!
SuspensionAngularJoint.SpringSettings.Damping *= Entity.Mass * 50;
SuspensionAngularJoint.SpringSettings.Stiffness *= Entity.Mass * 50;
//Motorize the wheel.
Motor = new RevoluteMotor(body, Entity, Vector3.Left);
Motor.Settings.VelocityMotor.Softness = treadSegmentDescription.MotorSoftness;
Motor.Settings.MaximumForce = treadSegmentDescription.MotorMaximumForce;
}
void AddBackWheel(Vector3 wheelOffset, Entity body)
{
var wheel = new Cylinder(body.Position + wheelOffset, .4m, .5m, 5);
wheel.Material.KineticFriction = 2.5m;
wheel.Material.StaticFriction = 3.5m;
wheel.Orientation = Quaternion.CreateFromAxisAngle(Vector3.Forward, MathHelper.PiOver2);
//Preventing the occasional pointless collision pair can speed things up.
CollisionRules.AddRule(wheel, body, CollisionRule.NoBroadPhase);
//Connect the wheel to the body.
var pointOnLineJoint = new PointOnLineJoint(body, wheel, wheel.Position, Vector3.Down, wheel.Position);
var suspensionLimit = new LinearAxisLimit(body, wheel, wheel.Position, wheel.Position, Vector3.Down, -1, 0);
//This linear axis motor will give the suspension its springiness by pushing the wheels outward.
var suspensionSpring = new LinearAxisMotor(body, wheel, wheel.Position, wheel.Position, Vector3.Down);
suspensionSpring.Settings.Mode = MotorMode.Servomechanism;
suspensionSpring.Settings.Servo.Goal = 0;
suspensionSpring.Settings.Servo.SpringSettings.Stiffness = 300;
suspensionSpring.Settings.Servo.SpringSettings.Damping = 70;
var revoluteAngularJoint = new RevoluteAngularJoint(body, wheel, Vector3.Right);
//Add the wheel and connection to the space.
Space.Add(wheel);
Space.Add(pointOnLineJoint);
Space.Add(suspensionLimit);
Space.Add(suspensionSpring);
Space.Add(revoluteAngularJoint);
}
public override SolverUpdateable GetBaseJoint()
{
LinearAxisMotor lam = new LinearAxisMotor(Ent1.Body, Ent2.Body, Ent2.GetPosition().ToBVector(), Ent2.GetPosition().ToBVector(), Axis.ToBVector());
lam.Settings.Mode = Mode ? MotorMode.Servomechanism : MotorMode.VelocityMotor;
lam.Settings.Servo.Goal = 1;
lam.Settings.Servo.SpringSettings.Stiffness = 300;
lam.Settings.Servo.SpringSettings.Damping = 70;
return(lam);
}
/// <summary>
/// Constructs a new constraint which restricts two degrees of linear freedom and two degrees of angular freedom between two entities.
/// This constructs the internal constraints, but does not configure them. Before using a constraint constructed in this manner,
/// ensure that its active constituent constraints are properly configured. The entire group as well as all internal constraints are initially inactive (IsActive = false).
/// </summary>
public LineSliderJoint()
{
IsActive = false;
PointOnLineJoint = new PointOnLineJoint();
AngularJoint = new RevoluteAngularJoint();
Limit = new LinearAxisLimit();
Motor = new LinearAxisMotor();
Add(PointOnLineJoint);
Add(AngularJoint);
Add(Limit);
Add(Motor);
}
/// <summary>
/// Constructs a new constraint which restricts two degrees of linear freedom and all three degrees of angular freedom.
/// This constructs the internal constraints, but does not configure them. Before using a constraint constructed in this manner,
/// ensure that its active constituent constraints are properly configured. The entire group as well as all internal constraints are initially inactive (IsActive = false).
/// </summary>
public PrismaticJoint()
{
IsActive = false;
PointOnLineJoint = new PointOnLineJoint();
AngularJoint = new NoRotationJoint();
Limit = new LinearAxisLimit();
Motor = new LinearAxisMotor();
Add(PointOnLineJoint);
Add(AngularJoint);
Add(Limit);
Add(Motor);
}
public void CreateSuspensionString(BepuEntity connectionA, Entity connectionB)
{
//code taken from bepu physics demo suspensioncardemo.cs and adapted for this project
LinearAxisMotor suspensionSpring = new LinearAxisMotor(connectionA.body, connectionB, connectionB.Position, connectionB.Position, Vector3.Down);
suspensionSpring.Settings.Mode = MotorMode.Servomechanism;
suspensionSpring.Settings.Servo.Goal = 0;
suspensionSpring.Settings.Servo.SpringSettings.StiffnessConstant = 300;
suspensionSpring.Settings.Servo.SpringSettings.DampingConstant = 70;
Game1.Instance.Space.Add(suspensionSpring);
//my own code ,add joints to lists of joints for explosion
suspensionSprings.Add(suspensionSpring);
}
/// <summary>
/// Constructs a new constraint which restricts one linear degree of freedom between two entities.
/// This constructs the internal constraints, but does not configure them. Before using a constraint constructed in this manner,
/// ensure that its active constituent constraints are properly configured. The entire group as well as all internal constraints are initially inactive (IsActive = false).
/// </summary>
public PlaneSliderJoint()
{
IsActive = false;
PointOnPlaneJoint = new PointOnPlaneJoint();
LimitX = new LinearAxisLimit();
MotorX = new LinearAxisMotor();
LimitY = new LinearAxisLimit();
MotorY = new LinearAxisMotor();
Add(PointOnPlaneJoint);
Add(LimitX);
Add(MotorX);
Add(LimitY);
Add(MotorY);
}
/// <summary>
/// Constructs a new constraint which restricts two degrees of linear freedom and two degrees of angular freedom between two entities.
/// </summary>
/// <param name="connectionA">First entity of the constraint pair.</param>
/// <param name="connectionB">Second entity of the constraint pair.</param>
/// <param name="lineAnchor">Location of the anchor for the line to be attached to connectionA in world space.</param>
/// <param name="lineDirection">Axis in world space to be attached to connectionA along which connectionB can move and rotate.</param>
/// <param name="pointAnchor">Location of the anchor for the point to be attached to connectionB in world space.</param>
public LineSliderJoint(Entity connectionA, Entity connectionB, Vector3 lineAnchor, Vector3 lineDirection, Vector3 pointAnchor)
{
if (connectionA == null)
{
connectionA = TwoEntityConstraint.WorldEntity;
}
if (connectionB == null)
{
connectionB = TwoEntityConstraint.WorldEntity;
}
PointOnLineJoint = new PointOnLineJoint(connectionA, connectionB, lineAnchor, lineDirection, pointAnchor);
AngularJoint = new RevoluteAngularJoint(connectionA, connectionB, lineDirection);
Limit = new LinearAxisLimit(connectionA, connectionB, lineAnchor, pointAnchor, lineDirection, 0, 0);
Motor = new LinearAxisMotor(connectionA, connectionB, lineAnchor, pointAnchor, lineDirection);
Limit.IsActive = false;
Motor.IsActive = false;
Add(PointOnLineJoint);
Add(AngularJoint);
Add(Limit);
Add(Motor);
}
/// <summary>
/// Constructs a new constraint which restricts two degrees of linear freedom and all three degrees of angular freedom.
/// </summary>
/// <param name="connectionA">First entity of the constraint pair.</param>
/// <param name="connectionB">Second entity of the constraint pair.</param>
/// <param name="lineAnchor">Location of the anchor for the line to be attached to connectionA in world space.</param>
/// <param name="lineDirection">Axis in world space to be attached to connectionA along which connectionB can move.</param>
/// <param name="pointAnchor">Location of the anchor for the point to be attached to connectionB in world space.</param>
public PrismaticJoint(Entity connectionA, Entity connectionB, System.Numerics.Vector3 lineAnchor, System.Numerics.Vector3 lineDirection, System.Numerics.Vector3 pointAnchor)
{
if (connectionA == null)
{
connectionA = TwoEntityConstraint.WorldEntity;
}
if (connectionB == null)
{
connectionB = TwoEntityConstraint.WorldEntity;
}
PointOnLineJoint = new PointOnLineJoint(connectionA, connectionB, lineAnchor, lineDirection, pointAnchor);
AngularJoint = new NoRotationJoint(connectionA, connectionB);
Limit = new LinearAxisLimit(connectionA, connectionB, lineAnchor, pointAnchor, lineDirection, 0, 0);
Motor = new LinearAxisMotor(connectionA, connectionB, lineAnchor, pointAnchor, lineDirection);
Limit.IsActive = false;
Motor.IsActive = false;
Add(PointOnLineJoint);
Add(AngularJoint);
Add(Limit);
Add(Motor);
}
Entity AddDriveWheel(Vector3 wheelOffset, Entity body, out RevoluteMotor drivingMotor, out RevoluteMotor steeringMotor)
{
var wheel = new Cylinder(body.Position + wheelOffset, .4m, .5m, 5);
wheel.Material.KineticFriction = 2.5m;
wheel.Material.StaticFriction = 3.5m;
wheel.Orientation = Quaternion.CreateFromAxisAngle(Vector3.Forward, MathHelper.PiOver2);
//Preventing the occasional pointless collision pair can speed things up.
CollisionRules.AddRule(wheel, body, CollisionRule.NoBroadPhase);
//Connect the wheel to the body.
var pointOnLineJoint = new PointOnLineJoint(body, wheel, wheel.Position, Vector3.Down, wheel.Position);
var suspensionLimit = new LinearAxisLimit(body, wheel, wheel.Position, wheel.Position, Vector3.Down, -1, 0);
//This linear axis motor will give the suspension its springiness by pushing the wheels outward.
var suspensionSpring = new LinearAxisMotor(body, wheel, wheel.Position, wheel.Position, Vector3.Down);
suspensionSpring.Settings.Mode = MotorMode.Servomechanism;
suspensionSpring.Settings.Servo.Goal = 0;
suspensionSpring.Settings.Servo.SpringSettings.Stiffness = 300;
suspensionSpring.Settings.Servo.SpringSettings.Damping = 70;
var swivelHingeAngularJoint = new SwivelHingeAngularJoint(body, wheel, Vector3.Up, Vector3.Right);
//Motorize the wheel.
drivingMotor = new RevoluteMotor(body, wheel, Vector3.Left);
drivingMotor.Settings.VelocityMotor.Softness = .3m;
drivingMotor.Settings.MaximumForce = 100;
//Let it roll when the user isn't giving specific commands.
drivingMotor.IsActive = false;
steeringMotor = new RevoluteMotor(body, wheel, Vector3.Up);
steeringMotor.Settings.Mode = MotorMode.Servomechanism;
//The constructor makes a guess about how to set up the constraint.
//It can't always be right since it doesn't have all the information;
//in this case, it chooses the basis and test axis incorrectly.
//This leads to a 'flipping' behavior when the wheel is rolling
//(the test axis is 'rolling' with the wheel, and passes over
//a singularity which causes a flip).
//To fix this, we configure the constraint directly.
//The basis is aligned with how the wheel is set up; we choose 'up' as
//the motorized axis, and right/forward to define the angle measurement plane.
//The test axis is set to be perpendicular to the wheel's rotation so that
//it only measures the steering angle.
//If you're curious, the angle measurement is just a Math.Atan2.
//The current world test axis is dotted against the two plane axes (Right and Forward here).
//This gives an x and y value. These can be plugged into Atan2 just like when
//you compute an angle on a normal 2d graph.
steeringMotor.Basis.SetWorldAxes(Vector3.Up, Vector3.Right);
steeringMotor.TestAxis = Vector3.Right;
steeringMotor.Settings.Servo.BaseCorrectiveSpeed = 5;
//The revolute motor is weaker than some other types of constraints and maintaining a goal in the presence of extremely fast rotation and integration issues.
//Laying a revolute limit on top of it can help mitigate the problem.
var steeringConstraint = new RevoluteLimit(body, wheel, Vector3.Up, Vector3.Right, -maximumTurnAngle, maximumTurnAngle);
//Add the wheel and connection to the space.
Space.Add(wheel);
Space.Add(pointOnLineJoint);
Space.Add(suspensionLimit);
Space.Add(suspensionSpring);
Space.Add(swivelHingeAngularJoint);
Space.Add(drivingMotor);
Space.Add(steeringMotor);
Space.Add(steeringConstraint);
return(wheel);
}