public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath) { //创建项目模型存放地址 string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName; if (!Directory.Exists(itemPath)) { Directory.CreateDirectory(itemPath); } else { DialogResult result = MessageBox.Show("模型文件夹" + itemPath + "存在,如果之前pack已经执行过,将不执行pack过程而是直接修改模型,如果要继续请点击YES,否请点击No中断作图", "提示信息", MessageBoxButtons.YesNo); if (result == DialogResult.No) { return; } } //Pack的后缀 string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6); //判断文件是否存在,如果存在将不执行pack,如果不存在则执行pack //packango后需要接收打包完成的地址,参数为后缀 string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm"; if (!File.Exists(packedAssyPath)) { packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath); } //查询参数 LLKSJ item = (LLKSJ)objLLKSJService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString()); swApp.CommandInProgress = true; //告诉SolidWorks,现在是用外部程序调用命令 int warnings = 0; int errors = 0; suffix = "_" + suffix;//后缀 ModelDoc2 swModel = default(ModelDoc2); ModelDoc2 swPart = default(ModelDoc2); AssemblyDoc swAssy = default(AssemblyDoc); Component2 swComp; Feature swFeat = default(Feature); object configNames = null; ModelDocExtension swModelDocExt = default(ModelDocExtension); bool status = false; string compReName = string.Empty; //打开Pack后的模型 swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2; swAssy = swModel as AssemblyDoc; //装配体 string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称 swModelDocExt = (ModelDocExtension)swModel.Extension; //打开装配体后必须重建,使Pack后的零件名都更新到带后缀的状态,否则程序出错 swModel.ForceRebuild3(true); //TopOnly参数设置成true,只重建顶层,不重建零件内部 /*注意SolidWorks单位是m,计算是应当/1000m * 整形与整形运算得出的结果仍然时整形,1640 / 1000m结果为0,因此必须将其中一个转化成decimal型,使用后缀m就可以了 * (int)不进行四舍五入,Convert.ToInt32会四舍五入 */ //-----------计算中间值,---------- try { //----------Top Level---------- swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m; //----------边缘板---------- //重命名装配体内部 compReName = "FNCL0029[LLKS-" + tree.Module + "]{" + (int)item.LeftLength + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0029[LLKS-]{}-3") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-3" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-3"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = item.LeftLength / 1000m; } //重命名装配体内部 compReName = "FNCL0030[LLKS-" + tree.Module + "]{" + (int)item.RightLength + "}"; status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0030[LLKS-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); if (status) { swModelDocExt.RenameDocument(compReName); } swModel.ClearSelection2(true); status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0); swModel.ClearSelection2(true); if (status) { swComp = swAssy.GetComponentByName(compReName + "-2"); swPart = swComp.GetModelDoc2(); //打开零件 swPart.Parameter("D2@Skizze1").SystemValue = item.RightLength / 1000m; } //----------长玻璃---------- if (item.LongGlassNo > 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600015-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600015-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. } if (item.LongGlassNo > 1) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-12")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0031[LLKS-MID]{289}-7")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-16")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600015-6")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-12")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0031[LLKS-MID]{289}-7")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-16")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600015-6")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern1"); if (item.LongGlassNo > 2) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern1").SystemValue = item.LongGlassNo - 1; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } //----------短玻璃---------- if (item.ShortGlassNo > 0) { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600032-1")); swComp.SetSuppression2(2); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-18")); swComp.SetSuppression2(2); //2解压缩,0压缩. } else { swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600032-1")); swComp.SetSuppression2(0); //2解压缩,0压缩. swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-18")); swComp.SetSuppression2(0); //2解压缩,0压缩. } swFeat = swAssy.FeatureByName("LocalLPattern2"); if (item.ShortGlassNo > 1) { swFeat.SetSuppression2(1, 2, configNames); //参数1:1解压,0压缩 swModel.Parameter("D1@LocalLPattern2").SystemValue = item.ShortGlassNo; } else { swFeat.SetSuppression2(0, 2, configNames); //参数1:1解压,0压缩 } swModel.ForceRebuild3(true); //设置成true,直接更新顶层,速度很快,设置成false,每个零件都会更新,很慢 swModel.Save(); //保存,很耗时间 swApp.CloseDoc(packedAssyPath); //关闭,很快 } catch (Exception ex) { throw new Exception(packedAssyPath + "作图过程发生异常,详细:" + ex.Message); } finally { swApp.CommandInProgress = false; //及时关闭外部命令调用,否则影响SolidWorks的使用 } }