private static void TemperatureSetpoint()
{
Console.WriteLine("Press [ENTER] to send command (1/1/16) - 28ºC");
Console.ReadLine();
_connection.Action("1/1/16", _connection.ToDataPoint("9.001", 28.0f));
Thread.Sleep(200);
Console.WriteLine("Press [ENTER] to send command (1/1/16) - 27ºC");
Console.ReadLine();
_connection.Action("1/1/16", _connection.ToDataPoint("9.001", 27.0f));
Thread.Sleep(200);
Console.WriteLine("Press [ENTER] to send command (1/1/16) - 26ºC");
Console.ReadLine();
_connection.Action("1/1/16", _connection.ToDataPoint("9.001", 26.0f));
Thread.Sleep(200);
Console.WriteLine("Press [ENTER] to send command (1/1/16) - 25ºC");
Console.ReadLine();
_connection.Action("1/1/16", _connection.ToDataPoint("9.001", 25.0f));
Thread.Sleep(200);
Console.WriteLine("Press [ENTER] to send command (1/1/16) - 24ºC");
Console.ReadLine();
_connection.Action("1/1/16", _connection.ToDataPoint("9.001", 24.0f));
Thread.Sleep(200);
}
public object InterfaceControl(MigInterfaceCommand request)
{
var response = new ResponseText("OK"); //default success value
Commands command;
Enum.TryParse(request.Command.Replace(".", "_"), out command);
var module = _modules.Find(m => m.Address.Equals(request.Address));
if (module != null)
{
switch (command)
{
case Commands.Control_On:
_connection.Action(module.Address.Replace(".", "/"), true);
break;
case Commands.Control_Off:
_connection.Action(module.Address.Replace(".", "/"), false);
// TODO: ...
break;
case Commands.Dimmer_Up:
_connection.Action(module.Address.Replace(".", "/"), _connection.ToDataPoint("3.008", 3));
// TODO: ...
break;
case Commands.Dimmer_Down:
_connection.Action(module.Address.Replace(".", "/"), _connection.ToDataPoint("3.008", -3));
// TODO: ...
break;
}
}
else
{
response = new ResponseText("ERROR: invalid module address");
}
return(response);
}
/// <summary>
/// Send action data to the specified address.
/// </summary>
/// <param name="address">Address.</param>
/// <param name="data">generic object action value.</param>
public KnxClientHelper Action(string address, object data)
{
knxClient.Action(address, knxClient.ToDataPoint("9001", data));
return(this);
}
public void Init()
{
lock (_runLock)
{
if (_run)
{
return;
}
_run = true;
}
_connection = new KnxConnectionTunneling("192.168.1.100", 3671, "192.168.1.101", 3671);
_connection.Debug = true;
_connection.KnxDisconnectedDelegate += Disconnected;
_connection.KnxConnectedDelegate += Connected;
_connection.KnxStatusDelegate += Status;
_connection.KnxEventDelegate += Event;
#region Never ending loop
Task.Factory.StartNew(() =>
{
//var doAction = true;
//var address = "0/0/1";
//var state = true;
//Repeat daily
var rrule = new RecurrencePattern(FrequencyType.Daily, 1);
double offsetOn = 0.5; //SP should become 20.5
double offsetOff = -2; //SP should become 18
var calendar = new Ical.Net.Calendar();
List <MyCalendarEvent> myCalendarEvents = new List <MyCalendarEvent>();
//off
var e_00__6_30 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 0, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 6, 30, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOff,
};
calendar.Events.Add(e_00__6_30);
myCalendarEvents.Add(e_00__6_30);
//on
var e_6_30__8 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 6, 30, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 8, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOn,
};
calendar.Events.Add(e_6_30__8);
myCalendarEvents.Add(e_6_30__8);
//off
var e_8__12 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 8, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 12, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOff,
};
calendar.Events.Add(e_8__12);
myCalendarEvents.Add(e_8__12);
//on
var e_12__14 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 12, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 14, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOn,
};
calendar.Events.Add(e_12__14);
myCalendarEvents.Add(e_12__14);
//off
var e_14__17 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 14, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 17, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOff,
};
calendar.Events.Add(e_14__17);
myCalendarEvents.Add(e_14__17);
//on
var e_17__18_30 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 17, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 18, 30, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOn,
};
calendar.Events.Add(e_17__18_30);
myCalendarEvents.Add(e_17__18_30);
//off
var e_18_30__20_30 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 18, 30, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 20, 30, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOff,
};
calendar.Events.Add(e_18_30__20_30);
myCalendarEvents.Add(e_18_30__20_30);
//on
var e_20_30__22 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 20, 30, 0)),
End = new CalDateTime(new DateTime(2021, 1, 4, 22, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOn,
};
calendar.Events.Add(e_20_30__22);
myCalendarEvents.Add(e_20_30__22);
//off
var e_22__00 = new MyCalendarEvent
{
Start = new CalDateTime(new DateTime(2021, 1, 4, 22, 0, 0)),
End = new CalDateTime(new DateTime(2021, 1, 5, 0, 0, 0)),
RecurrenceRules = new List <RecurrencePattern> {
rrule
},
Offset = offsetOff,
};
calendar.Events.Add(e_22__00);
myCalendarEvents.Add(e_22__00);
var serializer = new CalendarSerializer();
var serializedCalendar = serializer.SerializeToString(calendar);
var searchStart = DateTime.Now.Date;
var searchEnd = searchStart.AddDays(1);
List <EventOccurrency> events = GetEventOccurrencies(myCalendarEvents, calendar, searchStart, searchEnd);
foreach (var myEvent in events)
{
_logger.LogInformation("Event: {0} - {1}, offset: {2}", myEvent.Start, myEvent.End, myEvent.Offset);
}
EventOccurrency currentEvent = null;
while (_run)
{
if (!_connected)
{
InitGroups();
_logger.LogInformation("Connecting");
_connection.Connect();
Task.Delay(5000).GetAwaiter().GetResult();
StartupCaldaia();
//var readOnlyGroupAddresses = Groups.Values.Where(g => g.Direction == KnxGroupDirection.OUTPUT).Select(g => g.Address).ToList();
//foreach (var readOnlyGroupAddress in readOnlyGroupAddresses)
//{
// if (!_connected)
// {
// break;
// }
// _connection.RequestStatus(readOnlyGroupAddress);
// Task.Run(() =>
// {
// Thread.Sleep(1000);
// }).Wait();
//}
//_connection.Action("2/1/11", true);
//Task.Delay(2000).GetAwaiter().GetResult();
//_connection.RequestStatus("2/1/11");
//if (_connected)
//{
// var dpValue = _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.HVAC], "3");
// _connection.Action("2/1/4", dpValue);
// var dpTempValue = _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.TEMPERATURE], "1");
// _connection.Action("2/1/13", dpTempValue);
// var _2_1_xAddresses = Groups.Values.Where(v => v.Address.StartsWith("2/1/")).ToList();
// foreach (var _2_1_xAddress in _2_1_xAddresses)
// {
// _connection.RequestStatus(_2_1_xAddress.Address);
// Task.Delay(200).GetAwaiter().GetResult();
// }
// //Task.Delay(2000).GetAwaiter().GetResult();
// //_connection.RequestStatus("2/1/4");
//}
}
var now = DateTime.Now;
if (now >= searchEnd)
{
searchStart = now.Date;
searchEnd = searchStart.AddDays(1);
_logger.LogInformation("Changing day: {0} - {1}", searchStart, searchEnd);
events = GetEventOccurrencies(myCalendarEvents, calendar, searchStart, searchEnd);
foreach (var myEvent in events)
{
_logger.LogInformation("Event: {0} - {1}, offset: {2}", myEvent.Start, myEvent.End, myEvent.Offset);
}
}
//now < searchEnd
else if (currentEvent == null || currentEvent.End <= now)
{
_logger.LogInformation("Set current event: {0}", now);
events.RemoveAll(e => e.End <= now);
if (events.Any())
{
currentEvent = events.OrderBy(e => e.Start).First();
_logger.LogInformation("Event: {0} - {1}, offset: {2}", currentEvent.Start, currentEvent.End, currentEvent.Offset);
var offsetString = currentEvent.Offset.ToString(CultureInfo.InvariantCulture);
var dpTempValue = _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.TEMPERATURE], offsetString);
_connection.Action("2/1/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
_connection.Action("2/2/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
_connection.Action("2/3/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
_connection.Action("2/4/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
_connection.Action("2/5/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
_connection.Action("2/6/13", dpTempValue);
Task.Delay(200).GetAwaiter().GetResult();
}
}
Task.Delay(100).GetAwaiter().GetResult();
}
});
#endregion
}
private void RequestStateChange(KnxGroupWithStateDto group)
{
switch (group.DPT.Value)
{
case KnxDPTEnum.BOOLEAN:
{
Console.Write("true/false: ");
var boolString = Console.In.ReadLine();
bool boolState;
if (bool.TryParse(boolString, out boolState))
{
_connection.Action(group.Address, boolState);
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.SWITCH:
{
Console.Write("on/off: ");
var onOffString = Console.In.ReadLine();
if (onOffString.ToLower() == "on".ToLower())
{
_connection.Action(group.Address, true);
}
else if (onOffString.ToLower() == "off".ToLower())
{
_connection.Action(group.Address, false);
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.UP_DOWN:
{
Console.Write("up/down: ");
var onOffString = Console.In.ReadLine();
if (onOffString.ToLower() == "up".ToLower())
{
_connection.Action(group.Address, false);
}
else if (onOffString.ToLower() == "down".ToLower())
{
_connection.Action(group.Address, true);
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.TEMPERATURE:
{
Console.Write("5..28: ");
var tempString = Console.In.ReadLine();
double tempState;
if (double.TryParse(tempString, NumberStyles.Any, CultureInfo.InvariantCulture, out tempState))
{
_connection.Action(group.Address, _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.TEMPERATURE], tempString));
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.OPEN_CLOSE:
{
Console.Write("open/closed: ");
var openClosedString = Console.In.ReadLine();
if (openClosedString.ToLower() == "open".ToLower())
{
_connection.Action(group.Address, false);
}
else if (openClosedString.ToLower() == "closed".ToLower())
{
_connection.Action(group.Address, true);
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.COUNTER_PULSES:
case KnxDPTEnum.DIMMING_CONTROL:
Console.Out.WriteLine("DPT non gestito");
break;
case KnxDPTEnum.PERCENTAGE:
{
Console.Write("0..100: ");
var percString = Console.In.ReadLine();
double percState;
if (double.TryParse(percString, NumberStyles.Any, CultureInfo.InvariantCulture, out percState) &&
percState >= 0 && percState <= 100)
{
_connection.Action(group.Address, _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.PERCENTAGE], percString));
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
case KnxDPTEnum.HVAC:
{
Console.Write("0..4: ");
var intString = Console.In.ReadLine();
int intHVAC;
if (int.TryParse(intString, NumberStyles.Any, CultureInfo.InvariantCulture, out intHVAC) &&
intHVAC >= 0 && intHVAC <= 4)
{
_connection.Action(group.Address, _connection.ToDataPoint(KnxDPT.KnxDPTs[KnxDPTEnum.HVAC], intString));
}
else
{
Console.Out.WriteLine("Stato non valido");
}
}
break;
default:
break;
}
}
