private void LoadInternal(ref XmlHelper xh)
{
XmlNode sbc = xh.m_toplevel;
dpmmX = xh.GetDouble(sbc, "DotsPermmX", 102.4);
dpmmY = xh.GetDouble(sbc, "DotsPermmY", 76.8);
xres = xh.GetInt(sbc, "XResolution", 1024);
yres = xh.GetInt(sbc, "YResolution", 768);
//ZThick = xh.GetDouble(sbc, "SliceHeight", 0.05);
//layertime_ms = xh.GetInt(sbc, "LayerTime", 1000); // 1 second default
//firstlayertime_ms = xh.GetInt(sbc, "FirstLayerTime", 5000);
blanktime_ms = xh.GetInt(sbc, "BlankTime", 2000); // 2 seconds blank
plat_temp = xh.GetInt(sbc, "PlatformTemp", 75);
//exportgcode = xh.GetBool(sbc, "ExportGCode"));
exportsvg = xh.GetBool(sbc, "ExportSVG", false);
export = xh.GetBool(sbc, "Export", false);;
XOffset = xh.GetInt(sbc, "XOffset", 0);
YOffset = xh.GetInt(sbc, "YOffset", 0);
//numfirstlayers = xh.GetInt(sbc, "NumberofBottomLayers", 3);
direction = (eBuildDirection)xh.GetEnum(sbc, "Direction", typeof(eBuildDirection), eBuildDirection.Bottom_Up);
liftdistance = xh.GetDouble(sbc, "LiftDistance", 5.0);
slidetiltval = xh.GetDouble(sbc, "SlideTiltValue", 0.0);
antialiasing = xh.GetBool(sbc, "AntiAliasing", false);
usemainliftgcode = xh.GetBool(sbc, "UseMainLiftGCode", false);
aaval = xh.GetDouble(sbc, "AntiAliasingValue", 1.5);
liftfeedrate = xh.GetDouble(sbc, "LiftFeedRate", 50.0); // 50mm/s
liftretractrate = xh.GetDouble(sbc, "LiftRetractRate", 100.0); // 100mm/s
m_exportopt = xh.GetString(sbc, "ExportOption", "SUBDIR"); // default to saving in subdirectory
m_flipX = xh.GetBool(sbc, "FlipX", false);
m_flipY = xh.GetBool(sbc, "FlipY", false);
m_notes = xh.GetString(sbc, "Notes", "");
//m_resinprice = xh.GetDouble(sbc, "ResinPriceL", 0.0);
m_headercode = xh.GetString(sbc, "GCodeHeader", DefGCodeHeader());
m_footercode = xh.GetString(sbc, "GCodeFooter", DefGCodeFooter());
m_preslicecode = xh.GetString(sbc, "GCodePreslice", DefGCodePreslice());
m_liftcode = xh.GetString(sbc, "GCodeLift", DefGCodeLift());
selectedInk = xh.GetString(sbc, "SelectedInk", "Default");
inks = new Dictionary <string, InkConfig>();
List <XmlNode> inkNodes = xh.FindAllChildElement(sbc, "InkConfig");
foreach (XmlNode xnode in inkNodes)
{
string name = xh.GetString(xnode, "Name", "Default");
InkConfig ic = new InkConfig(name);
ic.Load(xh, xnode);
inks[name] = ic;
}
if (!inks.ContainsKey(selectedInk))
{
InkConfig ic = new InkConfig(selectedInk);
ic.Load(xh, sbc); // try loading legacy settings from parent
inks[selectedInk] = ic;
}
SetCurrentInk(selectedInk);
minExposure = xh.GetInt(sbc, "MinTestExposure", 500);
exposureStep = xh.GetInt(sbc, "TestExposureStep", 200);
}
public void CreateDefault()
{
numfirstlayers = 3;
layertime_ms = 1000; // 1 second default
firstlayertime_ms = 5000;
blanktime_ms = 2000; // 2 seconds blank
xres = 1024;
yres = 768;
ZThick = .05;
plat_temp = 75;
dpmmX = 102.4;
dpmmY = 76.8;
XOffset = 0;
YOffset = 0;
numfirstlayers = 3;
//exportgcode = true;
exportsvg = 0;
export = false;
exportpng = false;
direction = eBuildDirection.Bottom_Up;
liftdistance = 5.0;
//raise_time_ms = 750;
slidetiltval = 0.0;
antialiasing = false;
usemainliftgcode = false;
aaval = 1.5;
liftfeedrate = 50.0; // 50mm/s
bottomliftfeedrate = 25.0;
liftretractrate = 100.0; // 100mm/s
m_exportopt = "SUBDIR"; // default to saving in subdirectory
m_flipX = false;
m_flipY = false;
m_notes = "";
m_resinprice = 0.0;//
//set the default gcode segments
m_headercode = DefGCodeHeader();
m_footercode = DefGCodeFooter();
m_liftcode = DefGCodeLift();
m_preslicecode = DefGCodePreslice();
m_shutteropencode = DefGCodeOpenShutter();
m_shutterclosecode = DefGCodeCloseShutter();
inks = new Dictionary <string, InkConfig>();
selectedInk = "Default";
inks[selectedInk] = new InkConfig(selectedInk);
minExposure = 500;
m_createoutlines = false;
m_outlinewidth_inset = 2.0;
m_outlinewidth_outset = 0.0;
exposureStep = 200;
exportpreview = PreviewGenerator.ePreview.None;
userParams = new UserParameterList();
}
public bool UpdateCurrentInk()
{
if (inks.ContainsKey(selectedInk))
{
InkConfig ic = inks[selectedInk];
ic.ZThick = ZThick;
ic.layertime_ms = layertime_ms;
ic.firstlayertime_ms = firstlayertime_ms;
ic.numfirstlayers = numfirstlayers;
ic.resinprice = m_resinprice;
return(true);
}
return(false);
}
public bool SetCurrentInk(string inkname)
{
if (inks.ContainsKey(inkname))
{
selectedInk = inkname;
InkConfig ic = inks[inkname];
ZThick = ic.ZThick;
layertime_ms = ic.layertime_ms;
firstlayertime_ms = ic.firstlayertime_ms;
numfirstlayers = ic.numfirstlayers;
m_resinprice = ic.resinprice;
return(true);
}
return(false);
}
public string AddNewResin(string resinName)
{
if (inks.ContainsKey(resinName))
{
return("Resin profile name already exists");
}
InkConfig ic = new InkConfig(resinName);
if ((selectedInk != null) && inks.ContainsKey(selectedInk))
{
ic.CopyFrom(inks[selectedInk]);
}
inks[resinName] = ic;
SetCurrentInk(resinName);
return("OK");
}
private void LoadInternal(ref XmlHelper xh)
{
XmlNode sbc = xh.m_toplevel;
dpmmX = xh.GetDouble(sbc, "DotsPermmX", 102.4);
dpmmY = xh.GetDouble(sbc, "DotsPermmY", 76.8);
xres = xh.GetInt(sbc, "XResolution", 1024);
yres = xh.GetInt(sbc, "YResolution", 768);
//ZThick = xh.GetDouble(sbc, "SliceHeight", 0.05);
//layertime_ms = xh.GetInt(sbc, "LayerTime", 1000); // 1 second default
//firstlayertime_ms = xh.GetInt(sbc, "FirstLayerTime", 5000);
blanktime_ms = xh.GetInt(sbc, "BlankTime", 2000); // 2 seconds blank
plat_temp = xh.GetInt(sbc, "PlatformTemp", 75);
//exportgcode = xh.GetBool(sbc, "ExportGCode"));
exportsvg = xh.GetInt(sbc, "ExportSVG", 0); // the problem is this was previously a boolean variable
if ((exportsvg < 0) || (exportsvg > 4))
{
exportsvg = 0;
}
export = xh.GetBool(sbc, "Export", false);;
exportpng = xh.GetBool(sbc, "ExportPNG", false);;
XOffset = xh.GetInt(sbc, "XOffset", 0);
YOffset = xh.GetInt(sbc, "YOffset", 0);
//numfirstlayers = xh.GetInt(sbc, "NumberofBottomLayers", 3);
direction = (eBuildDirection)xh.GetEnum(sbc, "Direction", typeof(eBuildDirection), eBuildDirection.Bottom_Up);
liftdistance = xh.GetDouble(sbc, "LiftDistance", 5.0);
slidetiltval = xh.GetDouble(sbc, "SlideTiltValue", 0.0);
antialiasing = xh.GetBool(sbc, "AntiAliasing", false);
usemainliftgcode = xh.GetBool(sbc, "UseMainLiftGCode", false);
aaval = xh.GetDouble(sbc, "AntiAliasingValue", 1.5);
liftfeedrate = xh.GetDouble(sbc, "LiftFeedRate", 50.0); // 50mm/s
bottomliftfeedrate = xh.GetDouble(sbc, "BottomLiftFeedRate", 25.0); // 50mm/s
liftretractrate = xh.GetDouble(sbc, "LiftRetractRate", 100.0); // 100mm/s
m_exportopt = xh.GetString(sbc, "ExportOption", "SUBDIR"); // default to saving in subdirectory
m_flipX = xh.GetBool(sbc, "FlipX", false);
m_flipY = xh.GetBool(sbc, "FlipY", false);
m_notes = xh.GetString(sbc, "Notes", "");
m_createoutlines = xh.GetBool(sbc, "RenderOutlines", false);
m_outlinewidth_inset = xh.GetDouble(sbc, "OutlineWidth_Inset", 2.0);
m_outlinewidth_outset = xh.GetDouble(sbc, "OutlineWidth_Outset", 0.0);
m_feed_thickness = xh.GetDouble(sbc, "FeedThickness", 1);
m_wall_thickness = xh.GetDouble(sbc, "WallThickness", 1);
m_speed_spareading = xh.GetDouble(sbc, "SpeedSpareading", 1);
m_speed_printing = xh.GetDouble(sbc, "SpeedPrinting", 1);
m_roller_speed = xh.GetDouble(sbc, "Speed_printing", 1);
m_bottom_layers = xh.GetDouble(sbc, "BottomLayers", 1);
//m_resinprice = xh.GetDouble(sbc, "ResinPriceL", 0.0);
m_headercode = xh.GetString(sbc, "GCodeHeader", DefGCodeHeader());
m_footercode = xh.GetString(sbc, "GCodeFooter", DefGCodeFooter());
m_preslicecode = xh.GetString(sbc, "GCodePreslice", DefGCodePreslice());
m_liftcode = xh.GetString(sbc, "GCodeLift", DefGCodeLift());
m_layercode = xh.GetString(sbc, "GCodeLayer", DefGCodeLayer());
selectedInk = xh.GetString(sbc, "SelectedInk", "Default");
selectedpowder = xh.GetString(sbc, "SelectedPowder", "Default");
selectedfluid = xh.GetString(sbc, "SelectedFluid", "Default");
inks = new Dictionary <string, InkConfig>();
List <XmlNode> inkNodes = xh.FindAllChildElement(sbc, "InkConfig");
foreach (XmlNode xnode in inkNodes)
{
string name = xh.GetString(xnode, "Name", "Default");
InkConfig ic = new InkConfig(name);
ic.Load(xh, xnode);
inks[name] = ic;
}
if (!inks.ContainsKey(selectedInk))
{
InkConfig ic = new InkConfig(selectedInk);
ic.Load(xh, sbc); // try loading legacy settings from parent
inks[selectedInk] = ic;
}
fluids = new Dictionary <string, FluidConfig>();
List <XmlNode> fluidNodes = xh.FindAllChildElement(sbc, "FluidConfig");
foreach (XmlNode xnode in fluidNodes)
{
string name = xh.GetString(xnode, "Name", "Default");
var ic = new FluidConfig(name);
ic.Load(xh, xnode);
fluids[name] = ic;
}
if (!fluids.ContainsKey(selectedfluid))
{
FluidConfig ic = new FluidConfig(selectedfluid);
ic.Load(xh, sbc); // try loading legacy settings from parent
fluids[selectedfluid] = ic;
}
powders = new Dictionary <string, PowderConfig>();
List <XmlNode> powderNodes = xh.FindAllChildElement(sbc, "PowderConfig");
foreach (XmlNode xnode in powderNodes)
{
string name = xh.GetString(xnode, "Name", "Default");
var ic = new PowderConfig(name);
ic.Load(xh, xnode);
powders[name] = ic;
}
if (!powders.ContainsKey(selectedpowder))
{
PowderConfig ic = new PowderConfig(selectedpowder);
ic.Load(xh, sbc); // try loading legacy settings from parent
powders[selectedpowder] = ic;
}
SetCurrentInk(selectedInk);
SetCurrentPowder(selectedpowder);
SetCurrentFluid(selectedfluid);
minExposure = xh.GetInt(sbc, "MinTestExposure", 500);
exposureStep = xh.GetInt(sbc, "TestExposureStep", 200);
exportpreview = (PreviewGenerator.ePreview)xh.GetEnum(sbc, "ExportPreview", typeof(PreviewGenerator.ePreview), PreviewGenerator.ePreview.None);
xh.LoadUserParamList(userParams);
}