protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
{
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
}
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
{
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
}
else
{
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
}
return;
}
if (pUnk is ICadastralFabric)
{
m_pCadaFab = (ICadastralFabric)pUnk;
}
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
if (!bIsFileBasedGDB && !bIsUnVersioned)
{
MessageBox.Show("Truncate operates on non-versioned fabrics."
+ Environment.NewLine +
"Please unversion the fabric and try again.", "Tables are versioned");
return;
}
//Do a Start and Stop editing to make sure truncate it not running within an edit session
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{//if start editing fails then bail
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
FabricUTILS.StopEditing(pWS);
dlgTruncate pTruncateDialog = new dlgTruncate();
IArray TableArray = new ESRI.ArcGIS.esriSystem.ArrayClass();
pTruncateDialog.TheFabric = m_pCadaFab;
pTruncateDialog.TheTableArray = TableArray;
//Display the dialog
DialogResult pDialogResult = pTruncateDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
pTruncateDialog = null;
if (TableArray != null)
{
TableArray.RemoveAll();
}
return;
}
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 0;
m_pStepProgressor.MaxRange = pTruncateDialog.DropRowCount;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
bool bSuccess = false;
int iControlRowCount = 0;
//look in registry to get flag on whether to run truncate on standard tables, or to delete by row.
string sDesktopVers = FabricUTILS.GetDesktopVersionFromRegistry();
if (sDesktopVers.Trim() == "")
{
sDesktopVers = "Desktop10.0";
}
else
{
sDesktopVers = "Desktop" + sDesktopVers;
}
bool bDeleteTablesByRowInsteadOfTruncate = false;
string sValues = FabricUTILS.ReadFromRegistry(RegistryHive.CurrentUser, "Software\\ESRI\\" + sDesktopVers + "\\ArcMap\\Cadastral",
"AddIn.DeleteFabricRecords_Truncate");
if (sValues.Trim().ToLower() == "deletebytruncateonstandardtables" || bIsFileBasedGDB)
{
bDeleteTablesByRowInsteadOfTruncate = false;
}
if (sValues.Trim().ToLower() == "deletebyrowonstandardtables")
{
bDeleteTablesByRowInsteadOfTruncate = true;
}
if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints)
{ // get the control point count
ITable pControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
iControlRowCount = pControlTable.RowCount(null);
}
try
{
//Work on the table array
pTable = null;
m_pFIDSet = new FIDSetClass();
for (int i = 0; i <= TableArray.Count - 1; i++)
{
//if (TableArray.get_Element(i) is ITable) ...redundant
{
pTable = (ITable)TableArray.get_Element(i);
IDataset pDataSet = (IDataset)pTable;
//Following code uses the truncate method
//***
if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate)
{
ITableWrite2 pTableWr = (ITableWrite2)pTable;
m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name;
int RowCnt = pTable.RowCount(null);
pTableWr.Truncate();
m_pStepProgressor.MaxRange -= RowCnt;
//now re-insert the default plan
string sName = pDataSet.Name.ToUpper().Trim();
if (sName.EndsWith("_PLANS"))
{
int idxPlanName = pTable.FindField("Name");
int idxPlanDescription = pTable.FindField("Description");
int idxPlanAngleUnits = pTable.FindField("AngleUnits");
int idxPlanAreaUnits = pTable.FindField("AreaUnits");
int idxPlanDistanceUnits = pTable.FindField("DistanceUnits");
int idxPlanDirectionFormat = pTable.FindField("DirectionFormat");
int idxPlanLineParameters = pTable.FindField("LineParameters");
int idxPlanCombinedGridFactor = pTable.FindField("CombinedGridFactor");
int idxPlanTrueMidBrg = pTable.FindField("TrueMidBrg");
int idxPlanAccuracy = pTable.FindField("Accuracy");
int idxPlanInternalAngles = pTable.FindField("InternalAngles");
ICursor pCur = pTableWr.InsertRows(false);
IRowBuffer pRowBuff = pTable.CreateRowBuffer();
double dOneMeterEquals = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab);
bool bIsMetric = (dOneMeterEquals == 1);
//write category 1
pRowBuff.set_Value(idxPlanName, "<map>");
pRowBuff.set_Value(idxPlanDescription, "System default plan");
pRowBuff.set_Value(idxPlanAngleUnits, 3);
//
if (bIsMetric)
{
pRowBuff.set_Value(idxPlanAreaUnits, 5);
pRowBuff.set_Value(idxPlanDistanceUnits, 9001);
pRowBuff.set_Value(idxPlanDirectionFormat, 1);
}
else
{
pRowBuff.set_Value(idxPlanAreaUnits, 4);
pRowBuff.set_Value(idxPlanDistanceUnits, 9003);
pRowBuff.set_Value(idxPlanDirectionFormat, 4);
}
pRowBuff.set_Value(idxPlanLineParameters, 4);
pRowBuff.set_Value(idxPlanCombinedGridFactor, 1);
//pRowBuff.set_Value(idxPlanTrueMidBrg, 1);
pRowBuff.set_Value(idxPlanAccuracy, 4);
pRowBuff.set_Value(idxPlanInternalAngles, 0);
pCur.InsertRow(pRowBuff);
pCur.Flush();
if (pRowBuff != null)
{
Marshal.ReleaseComObject(pRowBuff);
}
if (pCur != null)
{
Marshal.ReleaseComObject(pCur);
}
}
}
}
}
}
catch (COMException ex)
{
MessageBox.Show(ex.Message + ": " + Convert.ToString(ex.ErrorCode));
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
//do the loop again, this time within the edit transaction and using the delete function for the chosen tables
try
{
//Start an Edit Transaction
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{//if start editing fails then bail
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
for (int i = 0; i <= TableArray.Count - 1; i++)
{
//if (TableArray.get_Element(i) is ITable)
{
pTable = (ITable)TableArray.get_Element(i);
IDataset pDataSet = (IDataset)pTable;
if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate)
{
}
else
{
//The following code is in place to workaround a limitation of truncate for fabric classes
//without a shapefield. It uses an alternative method for removing all the rows
//with the Delete function.
//General note: This method could be used exclusively, without needing the truncate method.
//One advantage is that it allows the option to cancel the whole
//operation using the cancel tracker. Truncate is faster, but is problematic if
//the truncate fails, and leaves a partially deleted fabric. For example, if the
//lines table is deleted but the points table truncate fails, the fabric would be in a
//corrupt state.
//****
m_pFIDSet.SetEmpty();
string sName = pDataSet.Name.ToUpper().Trim();
m_pStepProgressor.Message = "Loading rows from " + pDataSet.Name;
if (sName.EndsWith("_PLANS"))
{//for Plans table make sure the default plan is not deleted
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
string sFieldName = "NAME";
//pQF.WhereClause = sPref + sFieldName + sSuff + " <> '<map>'";
pQF.WhereClause = sFieldName + " <> '<map>'";
if (!BuildFIDSetFromTable(pTable, pQF, ref m_pFIDSet))
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
else
{
if (!BuildFIDSetFromTable(pTable, null, ref m_pFIDSet))
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
if (m_pFIDSet.Count() == 0)
{
continue;
}
m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name;
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pTable, m_pFIDSet,
m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
}
}
//now need to Fix control-to-point associations if one table was truncated
//and the other was not
if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints)
{
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
ITable PointTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
m_pStepProgressor.Message = "Resetting control associations on points...please wait.";
int idxFld = PointTable.FindField("NAME");
string sFieldName = PointTable.Fields.get_Field(idxFld).Name;
//NAME IS NOT NULL AND (NAME <>'' OR NAME <>' ')
//pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND (" +
// sPref + sFieldName + sSuff + "<>'' OR " + sPref + sFieldName + sSuff + " <>' ')";
//pQF.WhereClause = sFieldName + " IS NOT NULL AND (" + sFieldName + "<>'' OR " + sFieldName + " <>' ')";
pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " > ''"; //changed 1/14/2016
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
pSchemaEd.ReleaseReadOnlyFields(PointTable, esriCadastralFabricTable.esriCFTPoints);
m_pStepProgressor.MinRange = 0;
m_pStepProgressor.MaxRange = iControlRowCount;
if (!ResetPointAssociations(PointTable, pQF, true, m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
}
else if (pTruncateDialog.TruncateParcelsLinesPoints && !pTruncateDialog.TruncateControl)
{
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//POINTID >=0 AND POINTID IS NOT NULL
m_pStepProgressor.Message = "Resetting associations on control points...please wait.";
ITable ControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
int idxFld = ControlTable.FindField("POINTID");
string sFieldName = ControlTable.Fields.get_Field(idxFld).Name;
//pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND " +
// sPref + sFieldName + sSuff + " >=0";
pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " >=0";
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
pSchemaEd.ReleaseReadOnlyFields(ControlTable, esriCadastralFabricTable.esriCFTControl);
if (!FabricUTILS.ResetControlAssociations(ControlTable, null, true))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);
}
//now need to re-assign default accuracy table values, if the option was checked
if (pTruncateDialog.ResetAccuracyTableDefaults)
{
double dCat1 = FabricUTILS.ConvertMetersToFabricUnits(0.001, m_pCadaFab);
double dCat2 = FabricUTILS.ConvertMetersToFabricUnits(0.01, m_pCadaFab);
double dCat3 = FabricUTILS.ConvertMetersToFabricUnits(0.02, m_pCadaFab);
double dCat4 = FabricUTILS.ConvertMetersToFabricUnits(0.05, m_pCadaFab);
double dCat5 = FabricUTILS.ConvertMetersToFabricUnits(0.2, m_pCadaFab);
double dCat6 = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab);
double dCat7 = FabricUTILS.ConvertMetersToFabricUnits(10, m_pCadaFab);
ITable pAccTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTAccuracy);
int idxBrgSD = pAccTable.FindField("BrgSD");
int idxDistSD = pAccTable.FindField("DistSD");
int idxPPM = pAccTable.FindField("PPM");
int idxCategory = pAccTable.FindField("Category");
int idxDescription = pAccTable.FindField("Description");
ITableWrite2 pTableWr = (ITableWrite2)pAccTable;
ICursor pCur = pTableWr.InsertRows(false);
IRowBuffer pRowBuff = pAccTable.CreateRowBuffer();
//write category 1
pRowBuff.set_Value(idxCategory, 1);
pRowBuff.set_Value(idxBrgSD, 5);
pRowBuff.set_Value(idxDistSD, dCat1);
pRowBuff.set_Value(idxPPM, 5);
pRowBuff.set_Value(idxDescription, "1 - Highest");
pCur.InsertRow(pRowBuff);
//write category 2
pRowBuff.set_Value(idxCategory, 2);
pRowBuff.set_Value(idxBrgSD, 30);
pRowBuff.set_Value(idxDistSD, dCat2);
pRowBuff.set_Value(idxPPM, 25);
pRowBuff.set_Value(idxDescription, "2 - After 1980");
pCur.InsertRow(pRowBuff);
//write category 3
pRowBuff.set_Value(idxCategory, 3);
pRowBuff.set_Value(idxBrgSD, 60);
pRowBuff.set_Value(idxDistSD, dCat3);
pRowBuff.set_Value(idxPPM, 50);
pRowBuff.set_Value(idxDescription, "3 - 1908 to 1980");
pCur.InsertRow(pRowBuff);
//write category 4
pRowBuff.set_Value(idxCategory, 4);
pRowBuff.set_Value(idxBrgSD, 120);
pRowBuff.set_Value(idxDistSD, dCat4);
pRowBuff.set_Value(idxPPM, 125);
pRowBuff.set_Value(idxDescription, "4 - 1881 to 1907");
pCur.InsertRow(pRowBuff);
//write category 5
pRowBuff.set_Value(idxCategory, 5);
pRowBuff.set_Value(idxBrgSD, 300);
pRowBuff.set_Value(idxDistSD, dCat5);
pRowBuff.set_Value(idxPPM, 125);
pRowBuff.set_Value(idxDescription, "5 - Before 1881");
pCur.InsertRow(pRowBuff);
//write category 6
pRowBuff.set_Value(idxCategory, 6);
pRowBuff.set_Value(idxBrgSD, 3600);
pRowBuff.set_Value(idxDistSD, dCat6);
pRowBuff.set_Value(idxPPM, 1000);
pRowBuff.set_Value(idxDescription, "6 - 1800");
pCur.InsertRow(pRowBuff);
//write category 7
pRowBuff.set_Value(idxCategory, 7);
pRowBuff.set_Value(idxBrgSD, 6000);
pRowBuff.set_Value(idxDistSD, dCat7);
pRowBuff.set_Value(idxPPM, 5000);
pRowBuff.set_Value(idxDescription, "7 - Lowest");
pCur.InsertRow(pRowBuff);
pCur.Flush();
if (pRowBuff != null)
{
Marshal.ReleaseComObject(pRowBuff);
}
if (pCur != null)
{
Marshal.ReleaseComObject(pCur);
}
}
//now need to cleanup the IDSequence table if ALL the tables were truncated
if (pTruncateDialog.TruncateControl &&
pTruncateDialog.TruncateParcelsLinesPoints &&
pTruncateDialog.TruncateJobs &&
pTruncateDialog.TruncateAdjustments)
{
IWorkspace2 pWS2 = (IWorkspace2)pWS;
IDataset TheFabricDS = (IDataset)m_pCadaFab;
string sFabricName = TheFabricDS.Name;
string sName = sFabricName + "_IDSequencer";
bool bExists = pWS2.get_NameExists(esriDatasetType.esriDTTable, sName);
IFeatureWorkspace pFWS = (IFeatureWorkspace)pWS;
ITable pSequencerTable;
if (bExists)
{
pSequencerTable = pFWS.OpenTable(sName);
IFIDSet pFIDSet = new FIDSetClass();
if (BuildFIDSetFromTable(pSequencerTable, null, ref pFIDSet))
{
FabricUTILS.DeleteRowsUnversioned(pWS, pSequencerTable, pFIDSet, null, null);
}
}
}
Cleanup(pProgressorDialog, pMouseCursor);
if (TableArray != null)
{
TableArray.RemoveAll();
}
FabricUTILS.StopEditing(pWS);
}
catch (Exception ex)
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
MessageBox.Show(Convert.ToString(ex.Message));
}
}
protected override void OnClick()
{
#region Prepare for editing
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("This command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
pCadFabric = pCadEd.CadastralFabric;
else
{
MessageBox.Show("Please start editing and try again.");
return;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
//bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
//ICadastralFabricLayer pCFLayer = null;
IWorkspace pWS = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
#endregion
dlgChangeParcelHistory pChangeHistoryDialog = new dlgChangeParcelHistory();
// ******** Display the dialog *********
DialogResult pDialogResult = pChangeHistoryDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
return;
//************************
#region Get Selection
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ICadastralFabricSchemaEdit2 pSchemaEd = null;
try
{
int iParcelCount = pCadaSel.SelectedParcelCount;
bool m_bShowProgressor = (iParcelCount > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iParcelCount * 14; //(estimate 7 lines per parcel, 4 pts per parcel)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Initializing...";
}
#endregion
#region Get Parcel History Fields
//Get the parcel table history fields
//SystemStart, SystemEnd, LegalStart, LegalEnd, Historic
int iParcSysStartDate = pParcelsTable.FindField("systemstartdate");
int iParcSysEndDate = pParcelsTable.FindField("systemenddate");
int iParcLegalStartDate = pParcelsTable.FindField("legalstartdate");
int iParcLegalEndDate = pParcelsTable.FindField("legalenddate");
int iParcHistorical = pParcelsTable.FindField("historical");
//Add the OIDs of all the selected parcels into a new feature IDSet
//Need a Lookup for the History information
Dictionary<int, string> ParcelToHistory_DICT = new Dictionary<int, string>();
List<string> sOIDList = new List<string>();
sOIDList.Add("");
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
break;
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
if (sOIDList[j].Trim() == "")
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
else
sOIDList[j] = sOIDList[j] + "," + Convert.ToString(pGSParcel.DatabaseId);
iCounter++;
}
else
{//maximum tokens reached
iCounter = 0;
//set up the next OIDList
j++;
sOIDList.Add("");
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
//add to the lookup
IGSAttributes pGSParcelAttributes = (IGSAttributes)pGSParcel;
object pObj = pGSParcelAttributes.GetProperty("systemstartdate");
string sSystemStartParcel = "";
if (pObj != null)
sSystemStartParcel = pObj.ToString();
pObj = pGSParcelAttributes.GetProperty("systemenddate");
string sSystemEndParcel = "";
if (pObj != null)
sSystemEndParcel = pObj.ToString();
string sLegalStartParcel = pGSParcel.LegalStartDate.ToString();
string sLegalEndParcel = pGSParcel.LegalEndDate.ToString();
string sHistorical = pGSParcel.Historical.ToString();
ParcelToHistory_DICT.Add(pGSParcel.DatabaseId, sSystemStartParcel + "," +
sSystemEndParcel + "," + sLegalStartParcel + "," + sLegalEndParcel + "," +
sHistorical);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
m_pStepProgressor.Step();
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
#endregion
#region Confirm Edit Locks
bool bIsFileBasedGDB = false;
bool bIsUnVersioned = false;
bool bUseNonVersioned = false;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
return;
//if we're in an enterprise then test for edit locks
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
Marshal.ReleaseComObject(pJob);
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
Marshal.ReleaseComObject(pJob);
}
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
Marshal.ReleaseComObject(pSoftLcksInConflict);
Marshal.ReleaseComObject(pParcelsToLock);
Marshal.ReleaseComObject(pLocksInConflict);
}
#endregion
string sParcelSysEndDate = pParcelsTable.Fields.get_Field(iParcSysEndDate).Name;
string sParcelLegalStartDate = pParcelsTable.Fields.get_Field(iParcLegalStartDate).Name;
string sParcelLegalEndDate = pParcelsTable.Fields.get_Field(iParcLegalEndDate).Name;
string sParcelHistoric = pParcelsTable.Fields.get_Field(iParcHistorical).Name;
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel history...";
}
pEd.StartOperation();
#region The Edit
//make change to parcels
bool bSuccess=false;
ICursor pCurs=null;
IQueryFilter pQuFilter= new QueryFilterClass();
pQuFilter.SubFields = pParcelsTable.OIDFieldName + "," + sParcelLegalEndDate + "," + sParcelLegalStartDate
+ "," + sParcelSysEndDate + "," + sParcelHistoric;
bool bSystemEndDate_Clear = pChangeHistoryDialog.chkSystemEndDate.Checked
&& pChangeHistoryDialog.optClearSEDate.Checked;
bool bLegalStDate_Clear = pChangeHistoryDialog.chkLegalStartDate.Checked
&& pChangeHistoryDialog.optClearLSDate.Checked;
bool bLegalEndDate_Clear = pChangeHistoryDialog.chkLegalEndDate.Checked
&& pChangeHistoryDialog.optClearLEDate.Checked;
bool bSystemEndDate_Set = pChangeHistoryDialog.chkSystemEndDate.Checked
&& pChangeHistoryDialog.optChooseSEDate.Checked;
bool bLegalStDate_Set = pChangeHistoryDialog.chkLegalStartDate.Checked
&& pChangeHistoryDialog.optChooseLSDate.Checked;
bool bLegalEndDate_Set = pChangeHistoryDialog.chkLegalEndDate.Checked
&& pChangeHistoryDialog.optChooseLEDate.Checked;
List<bool> bHistory = new List<bool>();
bHistory.Add(bSystemEndDate_Clear);
bHistory.Add(bLegalStDate_Clear);
bHistory.Add(bLegalEndDate_Clear);
bHistory.Add(bSystemEndDate_Set);
bHistory.Add(bLegalStDate_Set);
bHistory.Add(bLegalEndDate_Set);
List<string> sDates = new List<string>();
sDates.Add(pChangeHistoryDialog.dtSEDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLSDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLEDatePicker.Text);
pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pLinesTable, esriCadastralFabricTable.esriCFTLines); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
foreach (string sInClause in sOIDList)
{
if (sInClause.Trim() == "")
continue;
pQuFilter.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
pCurs=pParcelsTable.Update(pQuFilter,false);
bSuccess = FabricUTILS.ChangeDatesOnTableMulti(pCurs, bHistory, sDates, bUseNonVersioned,
ParcelToHistory_DICT,m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
FabricUTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
}
//make change to points and lines
if (!FabricUTILS.UpdateHistoryOnLines(pLinesTable, pPointsTable, iParcelCount,
pCadFabric, sOIDList, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel))
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
FabricUTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
}
else
pEd.StopOperation("Change Parcel History");
#endregion
//now refresh the map layers
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
catch (Exception ex)
{
pEd.AbortOperation();
MessageBox.Show("Error:" + ex.Message);
}
finally
{
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);//set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set safety back on
}
}
protected override void OnClick()
{
#region Prepare for editing
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("This command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
else
{
MessageBox.Show("Please start editing and try again.");
return;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
//bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
//ICadastralFabricLayer pCFLayer = null;
IWorkspace pWS = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
#endregion
dlgChangeParcelHistory pChangeHistoryDialog = new dlgChangeParcelHistory();
// ******** Display the dialog *********
DialogResult pDialogResult = pChangeHistoryDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
//************************
#region Get Selection
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ICadastralFabricSchemaEdit2 pSchemaEd = null;
try
{
int iParcelCount = pCadaSel.SelectedParcelCount;
bool m_bShowProgressor = (iParcelCount > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iParcelCount * 14; //(estimate 7 lines per parcel, 4 pts per parcel)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Initializing...";
}
#endregion
#region Get Parcel History Fields
//Get the parcel table history fields
//SystemStart, SystemEnd, LegalStart, LegalEnd, Historic
int iParcSysStartDate = pParcelsTable.FindField("systemstartdate");
int iParcSysEndDate = pParcelsTable.FindField("systemenddate");
int iParcLegalStartDate = pParcelsTable.FindField("legalstartdate");
int iParcLegalEndDate = pParcelsTable.FindField("legalenddate");
int iParcHistorical = pParcelsTable.FindField("historical");
//Add the OIDs of all the selected parcels into a new feature IDSet
//Need a Lookup for the History information
Dictionary <int, string> ParcelToHistory_DICT = new Dictionary <int, string>();
List <string> sOIDList = new List <string>();
sOIDList.Add("");
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
if (sOIDList[j].Trim() == "")
{
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
else
{
sOIDList[j] = sOIDList[j] + "," + Convert.ToString(pGSParcel.DatabaseId);
}
iCounter++;
}
else
{//maximum tokens reached
iCounter = 0;
//set up the next OIDList
j++;
sOIDList.Add("");
sOIDList[j] = Convert.ToString(pGSParcel.DatabaseId);
}
//add to the lookup
IGSAttributes pGSParcelAttributes = (IGSAttributes)pGSParcel;
object pObj = pGSParcelAttributes.GetProperty("systemstartdate");
string sSystemStartParcel = "";
if (pObj != null)
{
sSystemStartParcel = pObj.ToString();
}
pObj = pGSParcelAttributes.GetProperty("systemenddate");
string sSystemEndParcel = "";
if (pObj != null)
{
sSystemEndParcel = pObj.ToString();
}
string sLegalStartParcel = pGSParcel.LegalStartDate.ToString();
string sLegalEndParcel = pGSParcel.LegalEndDate.ToString();
string sHistorical = pGSParcel.Historical.ToString();
ParcelToHistory_DICT.Add(pGSParcel.DatabaseId, sSystemStartParcel + "," +
sSystemEndParcel + "," + sLegalStartParcel + "," + sLegalEndParcel + "," +
sHistorical);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
#endregion
#region Confirm Edit Locks
bool bIsFileBasedGDB = false;
bool bIsUnVersioned = false;
bool bUseNonVersioned = false;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
{
return;
}
//if we're in an enterprise then test for edit locks
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
Marshal.ReleaseComObject(pJob);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
Marshal.ReleaseComObject(pJob);
}
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
Marshal.ReleaseComObject(pSoftLcksInConflict);
Marshal.ReleaseComObject(pParcelsToLock);
Marshal.ReleaseComObject(pLocksInConflict);
}
#endregion
string sParcelSysEndDate = pParcelsTable.Fields.get_Field(iParcSysEndDate).Name;
string sParcelLegalStartDate = pParcelsTable.Fields.get_Field(iParcLegalStartDate).Name;
string sParcelLegalEndDate = pParcelsTable.Fields.get_Field(iParcLegalEndDate).Name;
string sParcelHistoric = pParcelsTable.Fields.get_Field(iParcHistorical).Name;
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel history...";
}
pEd.StartOperation();
#region The Edit
//make change to parcels
bool bSuccess = false;
ICursor pCurs = null;
IQueryFilter pQuFilter = new QueryFilterClass();
pQuFilter.SubFields = pParcelsTable.OIDFieldName + "," + sParcelLegalEndDate + "," + sParcelLegalStartDate
+ "," + sParcelSysEndDate + "," + sParcelHistoric;
bool bSystemEndDate_Clear = pChangeHistoryDialog.chkSystemEndDate.Checked &&
pChangeHistoryDialog.optClearSEDate.Checked;
bool bLegalStDate_Clear = pChangeHistoryDialog.chkLegalStartDate.Checked &&
pChangeHistoryDialog.optClearLSDate.Checked;
bool bLegalEndDate_Clear = pChangeHistoryDialog.chkLegalEndDate.Checked &&
pChangeHistoryDialog.optClearLEDate.Checked;
bool bSystemEndDate_Set = pChangeHistoryDialog.chkSystemEndDate.Checked &&
pChangeHistoryDialog.optChooseSEDate.Checked;
bool bLegalStDate_Set = pChangeHistoryDialog.chkLegalStartDate.Checked &&
pChangeHistoryDialog.optChooseLSDate.Checked;
bool bLegalEndDate_Set = pChangeHistoryDialog.chkLegalEndDate.Checked &&
pChangeHistoryDialog.optChooseLEDate.Checked;
List <bool> bHistory = new List <bool>();
bHistory.Add(bSystemEndDate_Clear);
bHistory.Add(bLegalStDate_Clear);
bHistory.Add(bLegalEndDate_Clear);
bHistory.Add(bSystemEndDate_Set);
bHistory.Add(bLegalStDate_Set);
bHistory.Add(bLegalEndDate_Set);
List <string> sDates = new List <string>();
sDates.Add(pChangeHistoryDialog.dtSEDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLSDatePicker.Text);
sDates.Add(pChangeHistoryDialog.dtLEDatePicker.Text);
pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pLinesTable, esriCadastralFabricTable.esriCFTLines); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
foreach (string sInClause in sOIDList)
{
if (sInClause.Trim() == "")
{
continue;
}
pQuFilter.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
pCurs = pParcelsTable.Update(pQuFilter, false);
bSuccess = FabricUTILS.ChangeDatesOnTableMulti(pCurs, bHistory, sDates, bUseNonVersioned,
ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
FabricUTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
}
//make change to points and lines
if (!FabricUTILS.UpdateHistoryOnLines(pLinesTable, pPointsTable, iParcelCount,
pCadFabric, sOIDList, ParcelToHistory_DICT, m_pStepProgressor, m_pTrackCancel))
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
FabricUTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
}
else
{
pEd.StopOperation("Change Parcel History");
}
#endregion
//now refresh the map layers
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
catch (Exception ex)
{
pEd.AbortOperation();
MessageBox.Show("Error:" + ex.Message);
}
finally
{
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines); //set safety back on
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels); //set safety back on
}
}
protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
else
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
return;
}
if (pUnk is ICadastralFabric)
m_pCadaFab = (ICadastralFabric)pUnk;
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
Utils FabricUTILS = new Utils();
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
//Do a Start and Stop editing to make sure we're not running in an edit session
if (!FabricUTILS.StartEditing(pWS, true))
{//if start editing fails then bail
if (pUnk != null)
Marshal.ReleaseComObject(pUnk);
Cleanup(pMouseCursor, null, pTable, null, pWS, null, true);
FabricUTILS = null;
return;
}
FabricUTILS.StopEditing(pWS);
ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans);
ITable pParcelsTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
int iRowCount = pPlansTable.RowCount(null);
int iRowCount2 = pParcelsTable.RowCount(null);
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange =iRowCount + iRowCount2;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Searching " + iRowCount2.ToString() + " parcel records...";
int iFixCnt = 0;
//load all the plan names into a string array
ArrayList NoPlanParcels = new ArrayList();
ArrayList NoPlanParcelsGrouped = new ArrayList();
ArrayList PlansList = new ArrayList();
Dictionary<int, int> ParcelLookup = new Dictionary<int, int>();
if (!FindNoPlanParcels(pPlansTable, pParcelsTable, ref PlansList, ref NoPlanParcels,
ref NoPlanParcelsGrouped, ref ParcelLookup, out iFixCnt))
{
pProgressorDialog.HideDialog();
if (iFixCnt > 0)
MessageBox.Show("Canceled searching for parcels with no plan.", "Fix Parcels With No Name");
NoPlanParcels = null;
Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
return;
}
m_pStepProgressor.Message = "Search complete.";
NoPlanParcels.Sort();
dlgFixParcelsWithNoPlan MissingPlansDialog = new dlgFixParcelsWithNoPlan();
FillTheList(MissingPlansDialog.listView1, NoPlanParcels);
FillTheList(MissingPlansDialog.listViewByGroup, NoPlanParcelsGrouped);
FillTheListBox(MissingPlansDialog.listPlans, PlansList);
MissingPlansDialog.ThePlansList = PlansList;
MissingPlansDialog.label1.Text = "Found " + iFixCnt.ToString() +
" parcels that have a missing plan record.";
MissingPlansDialog.lblSelectionCount.Text = "(" + iFixCnt.ToString() + " of "
+ iFixCnt.ToString() + " selected to fix)";
//cleanup
Cleanup(null, null, null, null, null, pProgressorDialog, false);
DialogResult dResult = MissingPlansDialog.ShowDialog();
if (dResult == DialogResult.Cancel)
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
return;
}
//re-initilize the progressor
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = MissingPlansDialog.listView1.CheckedItems.Count;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Fixing parcels without a plan...";
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
pProgressorDialog.HideDialog();
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
int iNewPlanID = 0;
//Need to collect the choices from the UI and write the results to the DB
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
if (MissingPlansDialog.radioBtnExistingPlan.Checked)
{//Get the id of the EXISTING Plan
string sPlanString = MissingPlansDialog.listPlans.SelectedItem.ToString();
string[] sPlanOID = Regex.Split(sPlanString, "oid:");
sPlanOID[1].Trim();
iNewPlanID = Convert.ToInt32(sPlanOID[1].Remove(sPlanOID[1].LastIndexOf(")")));
}
Dictionary<string, int> PlanLookUp= new Dictionary<string,int>();
ArrayList iUnitsAndFormat = new ArrayList();
iUnitsAndFormat.Add(m_AngleUnits);
iUnitsAndFormat.Add(m_AreaUnits);
iUnitsAndFormat.Add(m_DistanceUnits);
iUnitsAndFormat.Add(m_DirectionFormat);
iUnitsAndFormat.Add(m_LineParams);
if (MissingPlansDialog.radioBtnUserDef.Checked)
{ //create a NEW plan named with user's entered text
ArrayList sPlanInserts = new ArrayList();
pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch
sPlanInserts.Add(MissingPlansDialog.txtPlanName.Text);
FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts,iUnitsAndFormat,PlansList, bIsUnVersioned,
null, null, ref PlanLookUp);
if (!PlanLookUp.TryGetValue(MissingPlansDialog.txtPlanName.Text, out iNewPlanID))
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
if (MissingPlansDialog.radioBtnPlanID.Checked)
{//create multiple new plans for each PlanID
ArrayList sPlanInserts = new ArrayList();
foreach (ListViewItem listItem in MissingPlansDialog.listViewByGroup.CheckedItems)
sPlanInserts.Add("[" + listItem.SubItems[0].Text + "]");
pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch
FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts, iUnitsAndFormat, PlansList, bIsUnVersioned,
null, null, ref PlanLookUp);
}
ArrayList sParcelUpdates = new ArrayList();
sParcelUpdates.Add("");
int i = 0;
int iCnt = 0;
int iTokenLimit = 995;
foreach (ListViewItem listItem in MissingPlansDialog.listView1.CheckedItems)
{
string s = listItem.SubItems[1].Text;
string[] sItems = Regex.Split(s, "id:");
if (iCnt >= iTokenLimit)//time to start a new row
{
sParcelUpdates.Add("");//add a new item to the arraylist
iCnt = 0;//reset token counter
i++;//increment array index
}
sItems[1] = sItems[1].Remove(sItems[1].LastIndexOf(")"));
if (iCnt == 0)
sParcelUpdates[i] += sItems[1];
else
sParcelUpdates[i] += "," + sItems[1];
iCnt++;
}
//============edit block==========
try
{
pSchemaEd.ReleaseReadOnlyFields(pTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
if (MissingPlansDialog.radioBtnUserDef.Checked || MissingPlansDialog.radioBtnExistingPlan.Checked)
{
if (!FabricUTILS.UpdateParcelRecords(pTable, sParcelUpdates, iNewPlanID, bIsUnVersioned,
m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.AbortEditing(pWS);
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
if (MissingPlansDialog.radioBtnPlanID.Checked)
{
if (!FabricUTILS.UpdateParcelRecordsByPlanGroup(pTable, sParcelUpdates, PlanLookUp,
ParcelLookup, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.AbortEditing(pWS);
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.StopEditing(pWS);
//Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
//FabricUTILS = null;
}
catch (COMException Ex)
{
MessageBox.Show(Ex.ErrorCode.ToString() +":" + Ex.Message,"Fix Missing Plans");
}
finally
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
}
}
protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
else
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
return;
}
if (pUnk is ICadastralFabric)
m_pCadaFab = (ICadastralFabric)pUnk;
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
if (!bIsFileBasedGDB && !bIsUnVersioned)
{
MessageBox.Show("Truncate operates on non-versioned fabrics."
+ Environment.NewLine +
"Please unversion the fabric and try again.", "Tables are versioned");
return;
}
//Do a Start and Stop editing to make sure truncate it not running within an edit session
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{//if start editing fails then bail
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
FabricUTILS.StopEditing(pWS);
dlgTruncate pTruncateDialog = new dlgTruncate();
IArray TableArray = new ESRI.ArcGIS.esriSystem.ArrayClass();
pTruncateDialog.TheFabric = m_pCadaFab;
pTruncateDialog.TheTableArray = TableArray;
//Display the dialog
DialogResult pDialogResult = pTruncateDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
pTruncateDialog = null;
if (TableArray != null)
{
TableArray.RemoveAll();
}
return;
}
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 0;
m_pStepProgressor.MaxRange = pTruncateDialog.DropRowCount;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
bool bSuccess = false;
int iControlRowCount=0;
//look in registry to get flag on whether to run truncate on standard tables, or to delete by row.
string sDesktopVers = FabricUTILS.GetDesktopVersionFromRegistry();
if (sDesktopVers.Trim() == "")
sDesktopVers = "Desktop10.0";
else
sDesktopVers = "Desktop" + sDesktopVers;
bool bDeleteTablesByRowInsteadOfTruncate = false;
string sValues = FabricUTILS.ReadFromRegistry(RegistryHive.CurrentUser, "Software\\ESRI\\" + sDesktopVers + "\\ArcMap\\Cadastral",
"AddIn.DeleteFabricRecords_Truncate");
if (sValues.Trim().ToLower() == "deletebytruncateonstandardtables" || bIsFileBasedGDB)
bDeleteTablesByRowInsteadOfTruncate = false;
if (sValues.Trim().ToLower() == "deletebyrowonstandardtables")
bDeleteTablesByRowInsteadOfTruncate = true;
if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints)
{ // get the control point count
ITable pControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
iControlRowCount = pControlTable.RowCount(null);
}
try
{
//Work on the table array
pTable = null;
m_pFIDSet = new FIDSetClass();
for (int i = 0; i <= TableArray.Count - 1; i++)
{
//if (TableArray.get_Element(i) is ITable) ...redundant
{
pTable = (ITable)TableArray.get_Element(i);
IDataset pDataSet = (IDataset)pTable;
//Following code uses the truncate method
//***
if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate)
{
ITableWrite2 pTableWr = (ITableWrite2)pTable;
m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name;
int RowCnt=pTable.RowCount(null);
pTableWr.Truncate();
m_pStepProgressor.MaxRange -= RowCnt;
//now re-insert the default plan
string sName = pDataSet.Name.ToUpper().Trim();
if (sName.EndsWith("_PLANS"))
{
int idxPlanName = pTable.FindField("Name");
int idxPlanDescription = pTable.FindField("Description");
int idxPlanAngleUnits = pTable.FindField("AngleUnits");
int idxPlanAreaUnits = pTable.FindField("AreaUnits");
int idxPlanDistanceUnits = pTable.FindField("DistanceUnits");
int idxPlanDirectionFormat = pTable.FindField("DirectionFormat");
int idxPlanLineParameters = pTable.FindField("LineParameters");
int idxPlanCombinedGridFactor = pTable.FindField("CombinedGridFactor");
int idxPlanTrueMidBrg = pTable.FindField("TrueMidBrg");
int idxPlanAccuracy = pTable.FindField("Accuracy");
int idxPlanInternalAngles = pTable.FindField("InternalAngles");
ICursor pCur = pTableWr.InsertRows(false);
IRowBuffer pRowBuff = pTable.CreateRowBuffer();
double dOneMeterEquals = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab);
bool bIsMetric = (dOneMeterEquals==1);
//write category 1
pRowBuff.set_Value(idxPlanName, "<map>");
pRowBuff.set_Value(idxPlanDescription, "System default plan");
pRowBuff.set_Value(idxPlanAngleUnits, 3);
//
if (bIsMetric)
{
pRowBuff.set_Value(idxPlanAreaUnits, 5);
pRowBuff.set_Value(idxPlanDistanceUnits, 9001);
pRowBuff.set_Value(idxPlanDirectionFormat, 1);
}
else
{
pRowBuff.set_Value(idxPlanAreaUnits, 4);
pRowBuff.set_Value(idxPlanDistanceUnits, 9003);
pRowBuff.set_Value(idxPlanDirectionFormat, 4);
}
pRowBuff.set_Value(idxPlanLineParameters, 4);
pRowBuff.set_Value(idxPlanCombinedGridFactor, 1);
//pRowBuff.set_Value(idxPlanTrueMidBrg, 1);
pRowBuff.set_Value(idxPlanAccuracy, 4);
pRowBuff.set_Value(idxPlanInternalAngles, 0);
pCur.InsertRow(pRowBuff);
pCur.Flush();
if (pRowBuff != null)
Marshal.ReleaseComObject(pRowBuff);
if (pCur != null)
Marshal.ReleaseComObject(pCur);
}
}
}
}
}
catch(COMException ex)
{
MessageBox.Show(ex.Message + ": " + Convert.ToString(ex.ErrorCode));
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
//do the loop again, this time within the edit transaction and using the delete function for the chosen tables
try
{
//Start an Edit Transaction
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{//if start editing fails then bail
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
for (int i = 0; i <= TableArray.Count - 1; i++)
{
//if (TableArray.get_Element(i) is ITable)
{
pTable = (ITable)TableArray.get_Element(i);
IDataset pDataSet = (IDataset)pTable;
if (pTable is IFeatureClass || !bDeleteTablesByRowInsteadOfTruncate)
{
}
else
{
//The following code is in place to workaround a limitation of truncate for fabric classes
//without a shapefield. It uses an alternative method for removing all the rows
//with the Delete function.
//General note: This method could be used exclusively, without needing the truncate method.
//One advantage is that it allows the option to cancel the whole
//operation using the cancel tracker. Truncate is faster, but is problematic if
//the truncate fails, and leaves a partially deleted fabric. For example, if the
//lines table is deleted but the points table truncate fails, the fabric would be in a
//corrupt state.
//****
m_pFIDSet.SetEmpty();
string sName = pDataSet.Name.ToUpper().Trim();
m_pStepProgressor.Message = "Loading rows from " + pDataSet.Name;
if (sName.EndsWith("_PLANS"))
{//for Plans table make sure the default plan is not deleted
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
string sFieldName = "NAME";
//pQF.WhereClause = sPref + sFieldName + sSuff + " <> '<map>'";
pQF.WhereClause = sFieldName + " <> '<map>'";
if (!BuildFIDSetFromTable(pTable, pQF, ref m_pFIDSet))
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
else
{
if (!BuildFIDSetFromTable(pTable, null, ref m_pFIDSet))
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
if (m_pFIDSet.Count() == 0)
continue;
m_pStepProgressor.Message = "Deleting all rows in " + pDataSet.Name;
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pTable, m_pFIDSet,
m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
}
}
}
//now need to Fix control-to-point associations if one table was truncated
//and the other was not
if (pTruncateDialog.TruncateControl && !pTruncateDialog.TruncateParcelsLinesPoints)
{
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
ITable PointTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
m_pStepProgressor.Message = "Resetting control associations on points...please wait.";
int idxFld = PointTable.FindField("NAME");
string sFieldName = PointTable.Fields.get_Field(idxFld).Name;
//NAME IS NOT NULL AND (NAME <>'' OR NAME <>' ')
//pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND (" +
// sPref + sFieldName + sSuff + "<>'' OR " + sPref + sFieldName + sSuff + " <>' ')";
//pQF.WhereClause = sFieldName + " IS NOT NULL AND (" + sFieldName + "<>'' OR " + sFieldName + " <>' ')";
pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " > ''"; //changed 1/14/2016
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
pSchemaEd.ReleaseReadOnlyFields(PointTable, esriCadastralFabricTable.esriCFTPoints);
m_pStepProgressor.MinRange = 0;
m_pStepProgressor.MaxRange = iControlRowCount;
if (!ResetPointAssociations(PointTable, pQF, true, m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
}
else if (pTruncateDialog.TruncateParcelsLinesPoints && !pTruncateDialog.TruncateControl)
{
IQueryFilter pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//POINTID >=0 AND POINTID IS NOT NULL
m_pStepProgressor.Message = "Resetting associations on control points...please wait.";
ITable ControlTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
int idxFld = ControlTable.FindField("POINTID");
string sFieldName = ControlTable.Fields.get_Field(idxFld).Name;
//pQF.WhereClause = sPref + sFieldName + sSuff + " IS NOT NULL AND " +
// sPref + sFieldName + sSuff + " >=0";
pQF.WhereClause = sFieldName + " IS NOT NULL AND " + sFieldName + " >=0";
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
pSchemaEd.ReleaseReadOnlyFields(ControlTable, esriCadastralFabricTable.esriCFTControl);
if (!FabricUTILS.ResetControlAssociations(ControlTable, null, true))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);
}
//now need to re-assign default accuracy table values, if the option was checked
if (pTruncateDialog.ResetAccuracyTableDefaults)
{
double dCat1 = FabricUTILS.ConvertMetersToFabricUnits(0.001, m_pCadaFab);
double dCat2 = FabricUTILS.ConvertMetersToFabricUnits(0.01, m_pCadaFab);
double dCat3 = FabricUTILS.ConvertMetersToFabricUnits(0.02, m_pCadaFab);
double dCat4 = FabricUTILS.ConvertMetersToFabricUnits(0.05, m_pCadaFab);
double dCat5 = FabricUTILS.ConvertMetersToFabricUnits(0.2, m_pCadaFab);
double dCat6 = FabricUTILS.ConvertMetersToFabricUnits(1, m_pCadaFab);
double dCat7 = FabricUTILS.ConvertMetersToFabricUnits(10, m_pCadaFab);
ITable pAccTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTAccuracy);
int idxBrgSD = pAccTable.FindField("BrgSD");
int idxDistSD = pAccTable.FindField("DistSD");
int idxPPM = pAccTable.FindField("PPM");
int idxCategory = pAccTable.FindField("Category");
int idxDescription = pAccTable.FindField("Description");
ITableWrite2 pTableWr = (ITableWrite2)pAccTable;
ICursor pCur = pTableWr.InsertRows(false);
IRowBuffer pRowBuff = pAccTable.CreateRowBuffer();
//write category 1
pRowBuff.set_Value(idxCategory, 1);
pRowBuff.set_Value(idxBrgSD, 5);
pRowBuff.set_Value(idxDistSD, dCat1);
pRowBuff.set_Value(idxPPM, 5);
pRowBuff.set_Value(idxDescription, "1 - Highest");
pCur.InsertRow(pRowBuff);
//write category 2
pRowBuff.set_Value(idxCategory, 2);
pRowBuff.set_Value(idxBrgSD, 30);
pRowBuff.set_Value(idxDistSD, dCat2);
pRowBuff.set_Value(idxPPM, 25);
pRowBuff.set_Value(idxDescription, "2 - After 1980");
pCur.InsertRow(pRowBuff);
//write category 3
pRowBuff.set_Value(idxCategory, 3);
pRowBuff.set_Value(idxBrgSD, 60);
pRowBuff.set_Value(idxDistSD, dCat3);
pRowBuff.set_Value(idxPPM, 50);
pRowBuff.set_Value(idxDescription, "3 - 1908 to 1980");
pCur.InsertRow(pRowBuff);
//write category 4
pRowBuff.set_Value(idxCategory, 4);
pRowBuff.set_Value(idxBrgSD, 120);
pRowBuff.set_Value(idxDistSD, dCat4);
pRowBuff.set_Value(idxPPM, 125);
pRowBuff.set_Value(idxDescription, "4 - 1881 to 1907");
pCur.InsertRow(pRowBuff);
//write category 5
pRowBuff.set_Value(idxCategory, 5);
pRowBuff.set_Value(idxBrgSD, 300);
pRowBuff.set_Value(idxDistSD, dCat5);
pRowBuff.set_Value(idxPPM, 125);
pRowBuff.set_Value(idxDescription, "5 - Before 1881");
pCur.InsertRow(pRowBuff);
//write category 6
pRowBuff.set_Value(idxCategory, 6);
pRowBuff.set_Value(idxBrgSD, 3600);
pRowBuff.set_Value(idxDistSD, dCat6);
pRowBuff.set_Value(idxPPM, 1000);
pRowBuff.set_Value(idxDescription, "6 - 1800");
pCur.InsertRow(pRowBuff);
//write category 7
pRowBuff.set_Value(idxCategory, 7);
pRowBuff.set_Value(idxBrgSD, 6000);
pRowBuff.set_Value(idxDistSD, dCat7);
pRowBuff.set_Value(idxPPM, 5000);
pRowBuff.set_Value(idxDescription, "7 - Lowest");
pCur.InsertRow(pRowBuff);
pCur.Flush();
if (pRowBuff != null)
Marshal.ReleaseComObject(pRowBuff);
if (pCur != null)
Marshal.ReleaseComObject(pCur);
}
//now need to cleanup the IDSequence table if ALL the tables were truncated
if(pTruncateDialog.TruncateControl&&
pTruncateDialog.TruncateParcelsLinesPoints &&
pTruncateDialog.TruncateJobs &&
pTruncateDialog.TruncateAdjustments)
{
IWorkspace2 pWS2=(IWorkspace2)pWS;
IDataset TheFabricDS=(IDataset)m_pCadaFab;
string sFabricName=TheFabricDS.Name;
string sName = sFabricName + "_IDSequencer";
bool bExists=pWS2.get_NameExists(esriDatasetType.esriDTTable, sName);
IFeatureWorkspace pFWS=(IFeatureWorkspace)pWS;
ITable pSequencerTable;
if (bExists)
{
pSequencerTable = pFWS.OpenTable(sName);
IFIDSet pFIDSet= new FIDSetClass();
if (BuildFIDSetFromTable(pSequencerTable, null, ref pFIDSet))
FabricUTILS.DeleteRowsUnversioned(pWS, pSequencerTable, pFIDSet, null, null);
}
}
Cleanup(pProgressorDialog, pMouseCursor);
if (TableArray != null)
{
TableArray.RemoveAll();
}
FabricUTILS.StopEditing(pWS);
}
catch (Exception ex)
{
FabricUTILS.AbortEditing(pWS);
Cleanup(pProgressorDialog, pMouseCursor);
MessageBox.Show(Convert.ToString(ex.Message));
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
Marshal.ReleaseComObject(pUID);
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IFeatureLayer CFPointLayer = null; IFeatureLayer CFLineLayer = null;
IFeatureLayer CFControlLayer = null;
IFeatureLayer CFLinePointLayer = null;
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
IProgressDialog2 pProgressorDialog = null;
clsFabricUtils UTILS = new clsFabricUtils();
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!UTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(UTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersioned = false;
IWorkspace pWS = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!UTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
{
return;
}
if (bUseNonVersioned)
{
ICadastralFabricLayer pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
Hashtable FabLyrToFieldMap = new Hashtable();
DateChanger pDateChangerDialog = new DateChanger();
pDateChangerDialog.cboBoxFabricClasses.Items.Clear();
string[] FieldStrArr = new string[CFParcelLayers.Count];
for (int i = 0; i < CFParcelLayers.Count; i++)
{
FieldStrArr[i] = "";
IFeatureLayer lyr = (IFeatureLayer)CFParcelLayers.get_Element(i);
// ICadastralFabricLayer cflyr = CFParcelLayers.get_Element(i);
pDateChangerDialog.cboBoxFabricClasses.Items.Add(lyr.Name);
IFields pFlds = lyr.FeatureClass.Fields;
for (int j = 0; j < lyr.FeatureClass.Fields.FieldCount; j++)
{
IField pFld = lyr.FeatureClass.Fields.get_Field(j);
if (pFld.Type == esriFieldType.esriFieldTypeDate)
{
if (FieldStrArr[i].Trim() == "")
{
FieldStrArr[i] = pFld.Name;
}
else
{
FieldStrArr[i] += "," + pFld.Name;
}
}
}
FabLyrToFieldMap.Add(i, FieldStrArr[i]);
}
pDateChangerDialog.FieldMap = FabLyrToFieldMap;
pDateChangerDialog.cboBoxFabricClasses.SelectedIndex = 0;
// ******** Display the dialog *********
DialogResult pDialogResult = pDateChangerDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
//************************
//*** get the choices from the dialog
IFeatureLayer flyr = (IFeatureLayer)CFParcelLayers.get_Element(pDateChangerDialog.cboBoxFabricClasses.SelectedIndex);
int iDateFld = flyr.FeatureClass.Fields.FindField(pDateChangerDialog.cboBoxFields.Text);
if (pDateChangerDialog.radioButton2.Checked)
{
IField pFld = flyr.FeatureClass.Fields.get_Field(iDateFld);
if (!pFld.IsNullable)
{
MessageBox.Show("The field you selected does not allow NULL values, and must have a date." + Environment.NewLine +
"Please try again using the date option, or using a different date field.", "Field does not Allow Null", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
ICadastralFabricSubLayer pSubLyr = (ICadastralFabricSubLayer)flyr;
bool bLines = false;
bool bParcels = false;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTLines)
{
bLines = true;
}
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTParcels)
{
bParcels = true;
}
//find out if there is a selection for the chosen layer
bool ChosenLayerHasSelection = false;
IFeatureSelection pFeatSel = null;
ISelectionSet2 pSelSet = null;
ICadastralSelection pCadaSel = null;
IEnumGSParcels pEnumGSParcels = null;
int iFeatureCnt = 0;
pFeatSel = (IFeatureSelection)flyr;
if (pFeatSel != null)
{
pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ChosenLayerHasSelection = (pSelSet.Count > 0);
iFeatureCnt = pSelSet.Count;
}
//****
if (iFeatureCnt == 0)
{
if (MessageBox.Show("There are no features selected in the " + flyr.Name + " layer." + Environment.NewLine + "Click OK to Change dates for ALL features in the layer.", "No Selection",
MessageBoxButtons.OKCancel) != DialogResult.OK)
{
return;
}
}
else
{
pCadaSel = (ICadastralSelection)pCadEd;
//** TODO: this enum should be based on the selected points, lines, or line-points
pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
//***
}
if (iFeatureCnt == 0)
{
m_pCursor = (ICursor)flyr.FeatureClass.Search(null, false);
ITable pTable = (ITable)flyr.FeatureClass;
iFeatureCnt = pTable.RowCount(null);
}
m_bShowProgressor = (iFeatureCnt > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iFeatureCnt;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting data...";
}
bool bCont = true;
m_pFIDSetParcels = new FIDSetClass();
if (ChosenLayerHasSelection && bParcels && !bIsUnVersioned)
{
//if there is a selection add the OIDs of all the selected parcels into a new feature IDSet
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
//}
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
}
if ((!ChosenLayerHasSelection && bParcels && !bIsUnVersioned) ||
(!ChosenLayerHasSelection && bLines && !bIsUnVersioned))
{
IRow pRow = m_pCursor.NextRow();
while (pRow != null)
{
m_pFIDSetParcels.Add(pRow.OID);
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
if (bLines && ChosenLayerHasSelection && !bIsUnVersioned)
{
pSelSet.Search(null, false, out m_pCursor);
IRow pRow = m_pCursor.NextRow();
int iFld = m_pCursor.FindField("PARCELID");
while (pRow != null)
{
m_pFIDSetParcels.Add((int)pRow.get_Value(iFld));
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
//=========================================================
if (!bCont)
{
//Since I'm using update cursor need to clear the cadastral selection
pCadaSel.SelectedParcels = null;
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
string sTime = "";
if (!bIsUnVersioned)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Change Date on selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
UTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_pStepProgressor != null && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
else
{
MessageBox.Show(Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//Now... start the edit. Start an edit operation.
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StartOperation();
}
if (bUseNonVersioned)
{
if (!UTILS.StartEditing(pWS, bUseNonVersioned))
{
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//Change all the date records
if (m_pStepProgressor != null)
{
m_pStepProgressor.Message = "Changing dates...";
}
bool bSuccess = true;
ITable Table2Edit = (ITable)flyr.FeatureClass;
ITableWrite pTableWr = (ITableWrite)Table2Edit;
if (ChosenLayerHasSelection)
{
//TODO: Selection based update does not work on unversioned tables
//need to change this code to create an update cursor from the selection,
//including code for tokens > 995
pSelSet.Update(null, false, out m_pCursor);
}
else
{
if (bUseNonVersioned)
{
m_pCursor = pTableWr.UpdateRows(null, false);
}
else
{
m_pCursor = Table2Edit.Update(null, false);
}
}
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
if (bLines)
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLines); //release safety-catch
}
else if (bParcels)
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTParcels); //release safety-catch
}
else
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
if (pDateChangerDialog.radioButton2.Checked)
{
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text, "",
bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
}
else
{
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text,
pDateChangerDialog.dateTimePicker1.Text, bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
if (bUseNonVersioned)
{
UTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Change Date");
}
if (bUseNonVersioned)
{
UTILS.StopEditing(pWS);
}
if (bParcels)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
}
else if (bLines)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
}
else
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
}
catch (Exception ex)
{
MessageBox.Show("Error:" + ex.Message);
if (bUseNonVersioned)
{
UTILS.AbortEditing(pWS);
}
else
{
pEd.AbortOperation();
}
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
}
}
protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
else
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
return;
}
if (pUnk is ICadastralFabric)
m_pCadaFab = (ICadastralFabric)pUnk;
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
Utils FabricUTILS = new Utils();
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
//Do a Start and Stop editing to make sure we're not running in an edit session
if (!FabricUTILS.StartEditing(pWS, true))
{//if start editing fails then bail
if (pUnk != null)
Marshal.ReleaseComObject(pUnk);
Cleanup(pMouseCursor, null, pTable, null, pWS, null);
FabricUTILS = null;
return;
}
FabricUTILS.StopEditing(pWS);
IFIDSet pPlansToDelete = null;
try
{
string[] SummaryNames = new string[0]; //define as dynamic array
string[] RepeatPlans = new string[0]; //define as dynamic array
ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans);
//load all the plan names into a string array
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
int iRowCount = pPlansTable.RowCount(null);
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iRowCount * 2;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Finding same-name plans to merge...";
int iRepeatCnt = 0;
if (!FindRepeatPlans(pPlansTable, out RepeatPlans, out SummaryNames, out iRepeatCnt))
{
pProgressorDialog.HideDialog();
if (iRepeatCnt == 0)
{
MessageBox.Show("All plans in the fabric have unique names." +
Environment.NewLine + "There are no plans to merge.", "Merge plans by name");
}
else
{
MessageBox.Show("There was a problem searching for repeat plans.", "Merge plans by name");
}
SummaryNames = null;
RepeatPlans = null;
Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog);
return;
}
dlgMergeSameNamePlans TheSummaryDialog = new dlgMergeSameNamePlans();
FillTheSummaryList(TheSummaryDialog, SummaryNames);
DialogResult dResult = TheSummaryDialog.ShowDialog();
if (dResult == DialogResult.Cancel)
{
pProgressorDialog.HideDialog();
SummaryNames = null;
RepeatPlans = null;
Cleanup(pMouseCursor, null,pTable, pPlansTable, pWS, pProgressorDialog);
pPlansTable = null;
return;
}
//get the time now
m_pStartTime = new TimeClass();
m_pStartTime.SetFromCurrentLocalTime();
Dictionary<int, int> Lookup = new Dictionary<int, int>();
string[] InClause = new string[0]; //define as dynamic array
m_pStepProgressor.Message = "Creating the merge query...";
FabricUTILS.BuildSearchMapAndQuery(RepeatPlans, out Lookup, out InClause, out pPlansToDelete);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
ITable ParcelTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ReleaseReadOnlyFields(ParcelTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
Cleanup(pMouseCursor, pPlansToDelete,pTable, pPlansTable, pWS, pProgressorDialog);
InClause = null;
Lookup.Clear();
Lookup = null;
return;
}
//setup progressor dialog for merge
m_pStepProgressor.Message = "Moving parcels from source to target plans...";
if (!FabricUTILS.MergePlans(ParcelTable, Lookup, InClause, bIsUnVersioned,m_pStepProgressor,m_pTrackCancel))
{
FabricUTILS.AbortEditing(pWS);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
Cleanup(pMouseCursor, pPlansToDelete,pTable,pPlansTable, pWS,pProgressorDialog);
InClause = null;
Lookup.Clear();
Lookup = null;
return;
}
if (TheSummaryDialog.checkBox1.Checked)
{
//setup progressor dialog for Delete
m_pStepProgressor.MaxRange = pPlansToDelete.Count();
m_pStepProgressor.Message = "Deleting source plans...";
if (bIsUnVersioned)
{
if (!FabricUTILS.DeleteRowsUnversioned(pWS, pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel))
Cleanup(pMouseCursor, pPlansToDelete,pTable,pPlansTable,pWS,pProgressorDialog);
}
else
{
if (!FabricUTILS.DeleteRowsByFIDSet(pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel))
Cleanup(pMouseCursor, pPlansToDelete,pTable,pPlansTable, pWS,pProgressorDialog);
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
m_pEndTime = new TimeClass();
m_pEndTime.SetFromCurrentLocalTime();
ITimeDuration HowLong = m_pEndTime.SubtractTime(m_pStartTime);
m_pStepProgressor.Message = "["
+ HowLong.Hours.ToString("00") + "h "
+ HowLong.Minutes.ToString("00") + "m "
+ HowLong.Seconds.ToString("00") + "s]" + " Saving changes...please wait.";
FabricUTILS.StopEditing(pWS);
Cleanup(pMouseCursor, pPlansToDelete,pTable,pPlansTable, pWS,pProgressorDialog);
}
catch (COMException ex)
{
MessageBox.Show(Convert.ToString(ex.ErrorCode));
Cleanup(pMouseCursor, pPlansToDelete,pTable,null,pWS,null);
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
Marshal.ReleaseComObject(pUID);
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IFeatureLayer CFPointLayer = null; IFeatureLayer CFLineLayer = null;
IFeatureLayer CFControlLayer = null;
IFeatureLayer CFLinePointLayer = null;
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
IProgressDialog2 pProgressorDialog = null;
clsFabricUtils UTILS = new clsFabricUtils();
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
pCadFabric = pCadEd.CadastralFabric;
if (pCadFabric == null)
{//find the first fabric in the map
if (!UTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(UTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
return; //no fabric sublayers available for the targeted fabric
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersioned = false;
IWorkspace pWS = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!UTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersioned))
return;
if (bUseNonVersioned)
{
ICadastralFabricLayer pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
Hashtable FabLyrToFieldMap = new Hashtable();
DateChanger pDateChangerDialog = new DateChanger();
pDateChangerDialog.cboBoxFabricClasses.Items.Clear();
string[] FieldStrArr = new string[CFParcelLayers.Count];
for (int i = 0; i < CFParcelLayers.Count; i++)
{
FieldStrArr[i] = "";
IFeatureLayer lyr = (IFeatureLayer)CFParcelLayers.get_Element(i);
// ICadastralFabricLayer cflyr = CFParcelLayers.get_Element(i);
pDateChangerDialog.cboBoxFabricClasses.Items.Add(lyr.Name);
IFields pFlds = lyr.FeatureClass.Fields;
for (int j = 0; j < lyr.FeatureClass.Fields.FieldCount; j++)
{
IField pFld = lyr.FeatureClass.Fields.get_Field(j);
if (pFld.Type == esriFieldType.esriFieldTypeDate)
{
if (FieldStrArr[i].Trim() == "")
FieldStrArr[i] = pFld.Name;
else
FieldStrArr[i] += "," + pFld.Name;
}
}
FabLyrToFieldMap.Add(i, FieldStrArr[i]);
}
pDateChangerDialog.FieldMap = FabLyrToFieldMap;
pDateChangerDialog.cboBoxFabricClasses.SelectedIndex = 0;
// ******** Display the dialog *********
DialogResult pDialogResult = pDateChangerDialog.ShowDialog();
if (pDialogResult != DialogResult.OK)
return;
//************************
//*** get the choices from the dialog
IFeatureLayer flyr = (IFeatureLayer)CFParcelLayers.get_Element(pDateChangerDialog.cboBoxFabricClasses.SelectedIndex);
int iDateFld = flyr.FeatureClass.Fields.FindField(pDateChangerDialog.cboBoxFields.Text);
if (pDateChangerDialog.radioButton2.Checked)
{
IField pFld = flyr.FeatureClass.Fields.get_Field(iDateFld);
if (!pFld.IsNullable)
{
MessageBox.Show("The field you selected does not allow NULL values, and must have a date." + Environment.NewLine +
"Please try again using the date option, or using a different date field.", "Field does not Allow Null", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
}
ICadastralFabricSubLayer pSubLyr = (ICadastralFabricSubLayer)flyr;
bool bLines = false;
bool bParcels = false;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTLines)
bLines = true;
if (pSubLyr.CadastralTableType == esriCadastralFabricTable.esriCFTParcels)
bParcels = true;
//find out if there is a selection for the chosen layer
bool ChosenLayerHasSelection = false;
IFeatureSelection pFeatSel = null;
ISelectionSet2 pSelSet = null;
ICadastralSelection pCadaSel = null;
IEnumGSParcels pEnumGSParcels = null;
int iFeatureCnt = 0;
pFeatSel = (IFeatureSelection)flyr;
if (pFeatSel != null)
{
pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ChosenLayerHasSelection = (pSelSet.Count > 0);
iFeatureCnt = pSelSet.Count;
}
//****
if (iFeatureCnt == 0)
{
if (MessageBox.Show("There are no features selected in the " + flyr.Name + " layer." + Environment.NewLine + "Click OK to Change dates for ALL features in the layer.", "No Selection",
MessageBoxButtons.OKCancel) != DialogResult.OK)
return;
}
else
{
pCadaSel = (ICadastralSelection)pCadEd;
//** TODO: this enum should be based on the selected points, lines, or line-points
pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
//***
}
if (iFeatureCnt == 0)
{
m_pCursor = (ICursor)flyr.FeatureClass.Search(null, false);
ITable pTable = (ITable)flyr.FeatureClass;
iFeatureCnt = pTable.RowCount(null);
}
m_bShowProgressor = (iFeatureCnt > 10);
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iFeatureCnt;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting data...";
}
bool bCont = true;
m_pFIDSetParcels = new FIDSetClass();
if (ChosenLayerHasSelection && bParcels && !bIsUnVersioned)
{
//if there is a selection add the OIDs of all the selected parcels into a new feature IDSet
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
break;
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
//}
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
m_pStepProgressor.Step();
}
}
}
if ((!ChosenLayerHasSelection && bParcels && !bIsUnVersioned) ||
(!ChosenLayerHasSelection && bLines && !bIsUnVersioned))
{
IRow pRow = m_pCursor.NextRow();
while (pRow != null)
{
m_pFIDSetParcels.Add(pRow.OID);
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
if (bLines && ChosenLayerHasSelection && !bIsUnVersioned)
{
pSelSet.Search(null, false, out m_pCursor);
IRow pRow = m_pCursor.NextRow();
int iFld = m_pCursor.FindField("PARCELID");
while (pRow != null)
{
m_pFIDSetParcels.Add((int)pRow.get_Value(iFld));
Marshal.ReleaseComObject(pRow);
pRow = m_pCursor.NextRow();
}
Marshal.ReleaseComObject(m_pCursor);
}
//=========================================================
if (!bCont)
{
//Since I'm using update cursor need to clear the cadastral selection
pCadaSel.SelectedParcels = null;
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
string sTime = "";
if (!bIsUnVersioned)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Change Date on selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
UTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_pStepProgressor != null && !bIsFileBasedGDB)
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
}
else
{
MessageBox.Show(Convert.ToString(pCOMEx.ErrorCode));
}
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//Now... start the edit. Start an edit operation.
if (pEd.EditState == esriEditState.esriStateEditing)
pEd.StartOperation();
if (bUseNonVersioned)
{
if (!UTILS.StartEditing(pWS, bUseNonVersioned))
{
if (bUseNonVersioned)
pCadEd.CadastralFabricLayer = null;
return;
}
}
//Change all the date records
if (m_pStepProgressor != null)
m_pStepProgressor.Message = "Changing dates...";
bool bSuccess = true;
ITable Table2Edit = (ITable)flyr.FeatureClass;
ITableWrite pTableWr = (ITableWrite)Table2Edit;
if (ChosenLayerHasSelection)
//TODO: Selection based update does not work on unversioned tables
//need to change this code to create an update cursor from the selection,
//including code for tokens > 995
pSelSet.Update(null, false, out m_pCursor);
else
{
if (bUseNonVersioned)
{
m_pCursor = pTableWr.UpdateRows(null, false);
}
else
m_pCursor = Table2Edit.Update(null, false);
}
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
if (bLines)
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLines); //release safety-catch
else if (bParcels)
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTParcels); //release safety-catch
else
{
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ReleaseReadOnlyFields(Table2Edit,
esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
if (pDateChangerDialog.radioButton2.Checked)
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text, "",
bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
else
bSuccess = UTILS.ChangeDatesOnTable(m_pCursor, pDateChangerDialog.cboBoxFields.Text,
pDateChangerDialog.dateTimePicker1.Text, bUseNonVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
pFabLocks.UndoLastAcquiredLocks();
if (bUseNonVersioned)
UTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
//clear selection, to make sure the parcel explorer is updated and refreshed properly
return;
}
if (pEd.EditState == esriEditState.esriStateEditing)
pEd.StopOperation("Change Date");
if (bUseNonVersioned)
UTILS.StopEditing(pWS);
if (bParcels)
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
else if (bLines)
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
else
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl); //release safety-catch
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLinePoints); //release safety-catch
}
}
catch (Exception ex)
{
MessageBox.Show("Error:" + ex.Message);
if (bUseNonVersioned)
UTILS.AbortEditing(pWS);
else
pEd.AbortOperation();
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
if (bUseNonVersioned)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
pProgressorDialog.HideDialog();
pProgressorDialog = null;
}
}
protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
{
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
}
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
{
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
}
else
{
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
}
return;
}
if (pUnk is ICadastralFabric)
{
m_pCadaFab = (ICadastralFabric)pUnk;
}
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
Utils FabricUTILS = new Utils();
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
//Do a Start and Stop editing to make sure we're not running in an edit session
if (!FabricUTILS.StartEditing(pWS, true))
{//if start editing fails then bail
if (pUnk != null)
{
Marshal.ReleaseComObject(pUnk);
}
Cleanup(pMouseCursor, null, pTable, null, pWS, null);
FabricUTILS = null;
return;
}
FabricUTILS.StopEditing(pWS);
IFIDSet pPlansToDelete = null;
try
{
string[] SummaryNames = new string[0]; //define as dynamic array
string[] RepeatPlans = new string[0]; //define as dynamic array
ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans);
//load all the plan names into a string array
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
int iRowCount = pPlansTable.RowCount(null);
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iRowCount * 2;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Finding same-name plans to merge...";
int iRepeatCnt = 0;
if (!FindRepeatPlans(pPlansTable, out RepeatPlans, out SummaryNames, out iRepeatCnt))
{
pProgressorDialog.HideDialog();
if (iRepeatCnt == 0)
{
MessageBox.Show("All plans in the fabric have unique names." +
Environment.NewLine + "There are no plans to merge.", "Merge plans by name");
}
else
{
MessageBox.Show("There was a problem searching for repeat plans.", "Merge plans by name");
}
SummaryNames = null;
RepeatPlans = null;
Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog);
return;
}
dlgMergeSameNamePlans TheSummaryDialog = new dlgMergeSameNamePlans();
FillTheSummaryList(TheSummaryDialog, SummaryNames);
DialogResult dResult = TheSummaryDialog.ShowDialog();
if (dResult == DialogResult.Cancel)
{
pProgressorDialog.HideDialog();
SummaryNames = null;
RepeatPlans = null;
Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog);
pPlansTable = null;
return;
}
//get the time now
m_pStartTime = new TimeClass();
m_pStartTime.SetFromCurrentLocalTime();
Dictionary <int, int> Lookup = new Dictionary <int, int>();
string[] InClause = new string[0]; //define as dynamic array
m_pStepProgressor.Message = "Creating the merge query...";
FabricUTILS.BuildSearchMapAndQuery(RepeatPlans, out Lookup, out InClause, out pPlansToDelete);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
ITable ParcelTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ReleaseReadOnlyFields(ParcelTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog);
InClause = null;
Lookup.Clear();
Lookup = null;
return;
}
//setup progressor dialog for merge
m_pStepProgressor.Message = "Moving parcels from source to target plans...";
if (!FabricUTILS.MergePlans(ParcelTable, Lookup, InClause, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel))
{
FabricUTILS.AbortEditing(pWS);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog);
InClause = null;
Lookup.Clear();
Lookup = null;
return;
}
if (TheSummaryDialog.checkBox1.Checked)
{
//setup progressor dialog for Delete
m_pStepProgressor.MaxRange = pPlansToDelete.Count();
m_pStepProgressor.Message = "Deleting source plans...";
if (bIsUnVersioned)
{
if (!FabricUTILS.DeleteRowsUnversioned(pWS, pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel))
{
Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog);
}
}
else
{
if (!FabricUTILS.DeleteRowsByFIDSet(pPlansTable, pPlansToDelete, m_pStepProgressor, m_pTrackCancel))
{
Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog);
}
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
m_pEndTime = new TimeClass();
m_pEndTime.SetFromCurrentLocalTime();
ITimeDuration HowLong = m_pEndTime.SubtractTime(m_pStartTime);
m_pStepProgressor.Message = "["
+ HowLong.Hours.ToString("00") + "h "
+ HowLong.Minutes.ToString("00") + "m "
+ HowLong.Seconds.ToString("00") + "s]" + " Saving changes...please wait.";
FabricUTILS.StopEditing(pWS);
Cleanup(pMouseCursor, pPlansToDelete, pTable, pPlansTable, pWS, pProgressorDialog);
}
catch (COMException ex)
{
MessageBox.Show(Convert.ToString(ex.ErrorCode));
Cleanup(pMouseCursor, pPlansToDelete, pTable, null, pWS, null);
}
}
protected override void OnClick()
{
m_pApp = (IApplication)ArcMap.Application;
if (m_pApp == null)
{
//if the app is null then could be running from ArcCatalog
m_pApp = (IApplication)ArcCatalog.Application;
}
if (m_pApp == null)
{
MessageBox.Show("Could not access the application.", "No Application found");
return;
}
IGxApplication pGXApp = (IGxApplication)m_pApp;
stdole.IUnknown pUnk = null;
try
{
pUnk = (stdole.IUnknown)pGXApp.SelectedObject.InternalObjectName.Open();
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_DATASET_TYPE_NOT_SUPPORTED_IN_RELEASE ||
ex.ErrorCode == -2147220944)
{
MessageBox.Show("The dataset is not supported in this release.", "Could not open the dataset");
}
else
{
MessageBox.Show(ex.ErrorCode.ToString(), "Could not open the dataset");
}
return;
}
if (pUnk is ICadastralFabric)
{
m_pCadaFab = (ICadastralFabric)pUnk;
}
else
{
MessageBox.Show("Please select a parcel fabric and try again.", "Not a parcel fabric");
return;
}
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
Utils FabricUTILS = new Utils();
ITable pTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
IDataset pDS = (IDataset)pTable;
IWorkspace pWS = pDS.Workspace;
bool bIsFileBasedGDB = true;
bool bIsUnVersioned = true;
FabricUTILS.GetFabricPlatform(pWS, m_pCadaFab, out bIsFileBasedGDB,
out bIsUnVersioned);
//Do a Start and Stop editing to make sure we're not running in an edit session
if (!FabricUTILS.StartEditing(pWS, true))
{//if start editing fails then bail
if (pUnk != null)
{
Marshal.ReleaseComObject(pUnk);
}
Cleanup(pMouseCursor, null, pTable, null, pWS, null, true);
FabricUTILS = null;
return;
}
FabricUTILS.StopEditing(pWS);
ITable pPlansTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTPlans);
ITable pParcelsTable = m_pCadaFab.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
int iRowCount = pPlansTable.RowCount(null);
int iRowCount2 = pParcelsTable.RowCount(null);
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = iRowCount + iRowCount2;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Searching " + iRowCount2.ToString() + " parcel records...";
int iFixCnt = 0;
//load all the plan names into a string array
ArrayList NoPlanParcels = new ArrayList();
ArrayList NoPlanParcelsGrouped = new ArrayList();
ArrayList PlansList = new ArrayList();
Dictionary <int, int> ParcelLookup = new Dictionary <int, int>();
if (!FindNoPlanParcels(pPlansTable, pParcelsTable, ref PlansList, ref NoPlanParcels,
ref NoPlanParcelsGrouped, ref ParcelLookup, out iFixCnt))
{
pProgressorDialog.HideDialog();
if (iFixCnt > 0)
{
MessageBox.Show("Canceled searching for parcels with no plan.", "Fix Parcels With No Name");
}
NoPlanParcels = null;
Cleanup(pMouseCursor, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
return;
}
m_pStepProgressor.Message = "Search complete.";
NoPlanParcels.Sort();
dlgFixParcelsWithNoPlan MissingPlansDialog = new dlgFixParcelsWithNoPlan();
FillTheList(MissingPlansDialog.listView1, NoPlanParcels);
FillTheList(MissingPlansDialog.listViewByGroup, NoPlanParcelsGrouped);
FillTheListBox(MissingPlansDialog.listPlans, PlansList);
MissingPlansDialog.ThePlansList = PlansList;
MissingPlansDialog.label1.Text = "Found " + iFixCnt.ToString() +
" parcels that have a missing plan record.";
MissingPlansDialog.lblSelectionCount.Text = "(" + iFixCnt.ToString() + " of "
+ iFixCnt.ToString() + " selected to fix)";
//cleanup
Cleanup(null, null, null, null, null, pProgressorDialog, false);
DialogResult dResult = MissingPlansDialog.ShowDialog();
if (dResult == DialogResult.Cancel)
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
return;
}
//re-initilize the progressor
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, m_pApp.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = MissingPlansDialog.listView1.CheckedItems.Count;
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Fixing parcels without a plan...";
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
pProgressorDialog.HideDialog();
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
int iNewPlanID = 0;
//Need to collect the choices from the UI and write the results to the DB
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)m_pCadaFab;
if (MissingPlansDialog.radioBtnExistingPlan.Checked)
{//Get the id of the EXISTING Plan
string sPlanString = MissingPlansDialog.listPlans.SelectedItem.ToString();
string[] sPlanOID = Regex.Split(sPlanString, "oid:");
sPlanOID[1].Trim();
iNewPlanID = Convert.ToInt32(sPlanOID[1].Remove(sPlanOID[1].LastIndexOf(")")));
}
Dictionary <string, int> PlanLookUp = new Dictionary <string, int>();
ArrayList iUnitsAndFormat = new ArrayList();
iUnitsAndFormat.Add(m_AngleUnits);
iUnitsAndFormat.Add(m_AreaUnits);
iUnitsAndFormat.Add(m_DistanceUnits);
iUnitsAndFormat.Add(m_DirectionFormat);
iUnitsAndFormat.Add(m_LineParams);
if (MissingPlansDialog.radioBtnUserDef.Checked)
{ //create a NEW plan named with user's entered text
ArrayList sPlanInserts = new ArrayList();
pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch
sPlanInserts.Add(MissingPlansDialog.txtPlanName.Text);
FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts, iUnitsAndFormat, PlansList, bIsUnVersioned,
null, null, ref PlanLookUp);
if (!PlanLookUp.TryGetValue(MissingPlansDialog.txtPlanName.Text, out iNewPlanID))
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
if (MissingPlansDialog.radioBtnPlanID.Checked)
{//create multiple new plans for each PlanID
ArrayList sPlanInserts = new ArrayList();
foreach (ListViewItem listItem in MissingPlansDialog.listViewByGroup.CheckedItems)
{
sPlanInserts.Add("[" + listItem.SubItems[0].Text + "]");
}
pSchemaEd.ReleaseReadOnlyFields(pPlansTable, esriCadastralFabricTable.esriCFTPlans); //release safety-catch
FabricUTILS.InsertPlanRecords(pPlansTable, sPlanInserts, iUnitsAndFormat, PlansList, bIsUnVersioned,
null, null, ref PlanLookUp);
}
ArrayList sParcelUpdates = new ArrayList();
sParcelUpdates.Add("");
int i = 0;
int iCnt = 0;
int iTokenLimit = 995;
foreach (ListViewItem listItem in MissingPlansDialog.listView1.CheckedItems)
{
string s = listItem.SubItems[1].Text;
string[] sItems = Regex.Split(s, "id:");
if (iCnt >= iTokenLimit) //time to start a new row
{
sParcelUpdates.Add(""); //add a new item to the arraylist
iCnt = 0; //reset token counter
i++; //increment array index
}
sItems[1] = sItems[1].Remove(sItems[1].LastIndexOf(")"));
if (iCnt == 0)
{
sParcelUpdates[i] += sItems[1];
}
else
{
sParcelUpdates[i] += "," + sItems[1];
}
iCnt++;
}
//============edit block==========
try
{
pSchemaEd.ReleaseReadOnlyFields(pTable, esriCadastralFabricTable.esriCFTParcels); //release safety-catch
if (MissingPlansDialog.radioBtnUserDef.Checked || MissingPlansDialog.radioBtnExistingPlan.Checked)
{
if (!FabricUTILS.UpdateParcelRecords(pTable, sParcelUpdates, iNewPlanID, bIsUnVersioned,
m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.AbortEditing(pWS);
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
if (MissingPlansDialog.radioBtnPlanID.Checked)
{
if (!FabricUTILS.UpdateParcelRecordsByPlanGroup(pTable, sParcelUpdates, PlanLookUp,
ParcelLookup, bIsUnVersioned, m_pStepProgressor, m_pTrackCancel))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.AbortEditing(pWS);
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
return;
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPlans);
FabricUTILS.StopEditing(pWS);
//Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
//FabricUTILS = null;
}
catch (COMException Ex)
{
MessageBox.Show(Ex.ErrorCode.ToString() + ":" + Ex.Message, "Fix Missing Plans");
}
finally
{
Cleanup(null, null, pTable, pPlansTable, pWS, pProgressorDialog, true);
FabricUTILS = null;
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ICadastralFabricLayer pCFLayer = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
ITable pControlTable = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
if (bUseNonVersionedDelete)
{
pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
pMouseCursor.SetCursor(0);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
return;
}
if (bMoreThan995UnjoinedParcels)
{
m_bShowProgressor = (pSelSet.Count > 10);
}
else
{
m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10);
}
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
if (bMoreThan995UnjoinedParcels)
{
m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
else
{
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
string[] sOIDList = { "(" };
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
//===================== start bug workaraound for 10.0 client ===================
if (bMoreThan995UnjoinedParcels)
{
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels
IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor;
IFeature pParcFeat = pParcelFeatCurs.NextFeature();
while (pParcFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetParcels.Find(pParcFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetParcels.Add(pParcFeat.OID);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
}
}
Marshal.ReleaseComObject(pParcFeat); //garbage collection
pParcFeat = pParcelFeatCurs.NextFeature();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
//===================== end bug workaraound for 10.0 client ===================
}
else //===the following code path is preferred======
{
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
}
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return;
}
}
//Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines
m_pFIDSetLines = new FIDSetClass();
m_pFIDSetPoints = new FIDSetClass();
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//first delete all the parcel records
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting parcels...";
}
bool bSuccess = true;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable,
m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (!bIsUnVersioned)
{
//check version and if the Cancel button was not clicked and we're higher than
//version 10.0, then re-try the delete with the core delete command
string sVersion = Application.ProductVersion;
int iErrCode = FabricUTILS.LastErrorCode;
if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400)
{
FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}");
}
}
return;
}
//next need to use an in clause for lines, so ...
string[] sPointOIDList = { "" };
int iCnt = 0;
int iTokenCnt = 0;
int iStepCnt = 1;
//...for each item in the sOIDList array
foreach (string inClause in sOIDList)
{
ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID");
IRow pRow = pLineCurs.NextRow();
Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID");
Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID");
while (pRow != null)
{
if (iTokenCnt >= tokenLimit)
{
FabricUTILS.RedimPreserveString(ref sPointOIDList, 1);
iTokenCnt = 0;
iCnt++;
}
m_pFIDSetLines.Add(pRow.OID);
Int32 i = (Int32)pRow.get_Value(iFromPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
i = (Int32)pRow.get_Value(iToPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
Marshal.ReleaseComObject(pRow); //garbage collection
pRow = pLineCurs.NextRow();
}
Marshal.ReleaseComObject(pLineCurs); //garbage collection
//delete line records based on the selected parcels
string sMessage = "Deleting lines...";
int iSetCnt = sOIDList.GetLength(0);
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//delete the line points for the deleted parcels
//build the list of the line points that need to be deleted.
//IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass;
string NewInClause = "";
//remove trailing comma
if ((inClause.Substring(inClause.Length - 1, 1)) == ",")
{
NewInClause = inClause.Substring(0, inClause.Length - 1);
}
//m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")";
m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")";
ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false);
IRow pLinePointFeat = pLinePointCurs.NextRow();
//Build an IDSet of linepoints for parcels to be deleted
IFIDSet pFIDSetLinePoints = new FIDSetClass();
while (pLinePointFeat != null)
{
pFIDSetLinePoints.Add(pLinePointFeat.OID);
Marshal.ReleaseComObject(pLinePointFeat); //garbage collection
pLinePointFeat = pLinePointCurs.NextRow();
}
//===========deletes linepoints associated with parcels
iSetCnt = sOIDList.GetLength(0);
sMessage = "Deleting line-points...";
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (pLinePointCurs != null)
{
Marshal.ReleaseComObject(pLinePointCurs); //garbage
}
return;
}
///////==============================================
Marshal.ReleaseComObject(pLinePointCurs); //garbage
iStepCnt++;
}
//now need to get points that should not be deleted, because they are used by lines that are not deleted.
//first search for the remaining lines. Any that have from/to points that are in the point fidset are the points
//that should stay
IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass();
IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass();
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Updating point delete list...";
}
for (int z = 0; z <= iCnt; z++)
{
//remove trailing comma
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",")
{
sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1);
}
}
//string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
//TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
string TheWhereClause = "(FROMPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
TheWhereClause = "(TOPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting points...";
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points.
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting line-points...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
continue;
}
//remove line points where underlying points were deleted
bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")),
sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
}
//=====
//Empty geometry on points that are floating points on unjoined parcels
m_pEmptyGeoms = new FIDSetClass();
FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
if (!bUseNonVersionedDelete)
{
FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms);
}
else
{
FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms);
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Resetting control point associations...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
//cleanup associated control points, and associations where underlying points were deleted
//m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")";
m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")";
pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch
if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete parcels");
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
if (pFeatSel != null && bMoreThan995UnjoinedParcels)
{
pFeatSel.Clear();
}
}
catch (Exception ex)
{
if (bUseNonVersionedDelete)
{
FabricUTILS.AbortEditing(pWS);
}
if (pEd != null)
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.AbortOperation();
}
}
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
}
}
protected override void OnClick()
{
IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
if (m_pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing first, and try again.", "Start Editing", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IArray PolygonLyrArr;
IMap pMap = m_pEd.Map;
ICadastralFabric pCadFabric = null;
//if we're in an edit session then grab the target fabric
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
MessageBox.Show
("No Parcel Fabric found in the workspace you're editing.\r\nPlease re-start editing on a workspace with a fabric, and try again.",
"No Fabric found", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
Utilities Utils = new Utilities();
if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTParcels, out PolygonLyrArr))
{
return;
}
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadEd;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Area Calculation does not work when the parcel is open.\r\nPlease close the parcel and try again.",
"Calculate Stated Area", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IActiveView pActiveView = ArcMap.Document.ActiveView;
CalcStatedAreaDLG CalcStatedArea = new CalcStatedAreaDLG();
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedEdit = false;
IWorkspace pWS = null;
ITable pParcelsTable = null;
IProgressDialog2 pProgressorDialog = null;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
var pTool = ArcMap.Application.CurrentTool;
try
{
IFeatureLayer pFL = (IFeatureLayer)PolygonLyrArr.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedEdit))
{
return;
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
ArcMap.Application.CurrentTool = null;
//Display the dialog
DialogResult pDialogResult = CalcStatedArea.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
m_bShowProgressor = (pSelSet.Count > 10) || pCadaSel.SelectedParcelCount > 10;
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 3; //(3 runs through the selection)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
//pEnumGSParcels should take care of this automatically
//but need to do this for line sublayer
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
int tokenLimit = 995;
List <int> oidList = new List <int>();
Dictionary <int, string> dict_ParcelSelection2CalculatedArea = new Dictionary <int, string>();
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
int iDBId = pGSParcel.DatabaseId;
if (!oidList.Contains(iDBId))
{
oidList.Add(iDBId);
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
string sSuffixUnit = CalcStatedArea.txtSuffix.Text;
int iAreaPrec = (int)CalcStatedArea.numDecPlaces.Value;
double dSqMPerUnit = 1;
if (CalcStatedArea.cboAreaUnit.FindStringExact("Acres") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 4046.86;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Hectares") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 10000;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290304;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet US") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290341;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Computing areas...";
}
List <string> sInClauseList0 = null;
m_pQF = new QueryFilterClass();
if (oidList.Count() > 0)
{
sInClauseList0 = Utils.InClauseFromOIDsList(oidList, tokenLimit);
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
CalculateStatedArea(m_pQF, pParcelsTable, pCadEd, m_pEd.Map.SpatialReference, dSqMPerUnit, sSuffixUnit,
iAreaPrec, ref dict_ParcelSelection2CalculatedArea, m_pTrackCancel);
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
}
}
else
{
return;
}
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
#region Create Cadastral Job
//string sTime = "";
//if (!bIsUnVersioned && !bIsFileBasedGDB)
//{
// //see if parcel locks can be obtained on the selected parcels. First create a job.
// DateTime localNow = DateTime.Now;
// sTime = Convert.ToString(localNow);
// ICadastralJob pJob = new CadastralJobClass();
// pJob.Name = sTime;
// pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
// pJob.Description = "Interpolate Z values on selected features";
// try
// {
// Int32 jobId = pCadFabric.CreateJob(pJob);
// }
// catch (COMException ex)
// {
// if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
// {
// MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
// }
// else
// {
// MessageBox.Show(ex.Message);
// }
// return;
// }
//}
#endregion
//ILongArray pTempParcelsLongArray = new LongArrayClass();
//List<int> lstParcelChanges = Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pTempParcelsLongArray, ref pParcelIds, m_pStepProgressor);
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
try
{
m_pEd.StartOperation();
}
catch
{
m_pEd.AbortOperation();//abort any open edit operations and try again
m_pEd.StartOperation();
}
}
if (bUseNonVersionedEdit)
{
if (!Utils.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
//pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels);
int idxParcelStatedArea = pParcelsTable.FindField("STATEDAREA");
string ParcelStatedAreaFieldName = pParcelsTable.Fields.get_Field(idxParcelStatedArea).Name;
if (m_bShowProgressor)
{
// pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel areas...";
}
IRow pTheFeatRow = null;
ICursor pUpdateCursor = null;
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
if (bUseNonVersionedEdit)
{
ITableWrite pTableWr = (ITableWrite)pParcelsTable; //used for unversioned table
pUpdateCursor = pTableWr.UpdateRows(m_pQF, false);
}
else
{
pUpdateCursor = pParcelsTable.Update(m_pQF, false);
}
pTheFeatRow = pUpdateCursor.NextRow();
while (pTheFeatRow != null)
{
string sAreaString = dict_ParcelSelection2CalculatedArea[pTheFeatRow.OID];
pTheFeatRow.set_Value(idxParcelStatedArea, sAreaString);
pTheFeatRow.Store();
Marshal.ReleaseComObject(pTheFeatRow); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
pTheFeatRow = pUpdateCursor.NextRow();
}
Marshal.ReleaseComObject(pUpdateCursor); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
}
m_pEd.StopOperation("Calculate Stated Area");
//pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set fields back to read-only
}
catch (Exception ex)
{
if (m_pEd != null)
{
AbortEdits(bIsUnVersioned, m_pEd, pWS);
}
MessageBox.Show(ex.Message);
}
finally
{
ArcMap.Application.CurrentTool = pTool;
m_pStepProgressor = null;
m_pTrackCancel = null;
if (pProgressorDialog != null)
{
pProgressorDialog.HideDialog();
}
RefreshMap(pActiveView, PolygonLyrArr);
ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd;
IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow;
pPropW.RefreshAll();
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
// refresh the attributes dialog
ISelectionEvents pSelEvents = (ISelectionEvents)m_pEd.Map;
pSelEvents.SelectionChanged();
if (bUseNonVersionedEdit)
{
pCadEd.CadastralFabricLayer = null;
PolygonLyrArr = null;
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
}
}
