/// <summary>
/// This is the routine to convert the input node to triangle faces.
/// </summary>
/// <param name="nodeHandle"> Input the node by handle. </param>
/// <param name="convertToTri"> Input whether to convert to a tri object first. </param>
/// <param name="addShell"> Input whether to add the shell modifier when finished converting to face. </param>
/// <param name="shell"> Input the shell thickness amount. </param>
/// <param name="addEditMesh"> Input whether to add the Edit Mesh modifier when finished converting to face. </param>
/// <param name="collapseNode"> Input whether to collapse the node afterwards. </param>
/// <param name="centerPivot"> Input whether to center the pivot on each new face. </param>
/// <returns> Returns 1 if successful or -1 if not. </returns>
static public int ConvertToTriangleFaces(uint nodeHandle,
bool convertToTri = true, // C# now supports default parameters
bool addShell = true,
float shell = 0.1f,
bool addEditMesh = true,
bool collapseNode = true,
bool centerPivot = true)
{
try
{
IGlobal global = Autodesk.Max.GlobalInterface.Instance;
IInterface14 ip = global.COREInterface14;
IINode node = ip.GetINodeByHandle(nodeHandle);
// Get it's current object state. If a modifier has been applied, for example,
// it is going to return the OS of the mesh in it's current form in the timeline.
IObjectState os = node.ObjectRef.Eval(ip.Time);
// Now grab the object itself.
IObject objOriginal = os.Obj;
// Let's make sure it is a TriObject, which is the typical kind of object with a mesh
if (!objOriginal.IsSubClassOf(global.TriObjectClassID))
{
// If it is NOT, see if we can convert it...
if (convertToTri && objOriginal.CanConvertToType(global.TriObjectClassID) == 1)
{
objOriginal = objOriginal.ConvertToType(ip.Time, global.TriObjectClassID);
}
else
{
return(-1);
}
}
// Now we should be safe to know it is a TriObject and we can cast it as such.
// An exception will be thrown...
ITriObject triOriginal = objOriginal as ITriObject;
// Let's first setup a class ID for the type of objects are are creating.
// New TriObject in this case to hold each face.
IClass_ID cid = global.Class_ID.Create((uint)BuiltInClassIDA.TRIOBJ_CLASS_ID, 0);
IMatrix3 mat = node.GetNodeTM(0, null);
IPoint3 ptOffsetPos = node.ObjOffsetPos;
IQuat quatOffsetRot = node.ObjOffsetRot;
IScaleValue scaleOffsetScale = node.ObjOffsetScale;
// We can grab the faces as a List and iterate them in .NET API.
IMesh mesh = triOriginal.Mesh;
IList <IFace> faces = triOriginal.Mesh.Faces;
int nNumFaces = faces.Count;
if (m_bUsingProgress)
{
m_ctrlProgress.PB_ProgressMaxNum = nNumFaces;
}
ADN_UserBreakCheck checkUserBreak = new ADN_UserBreakCheck();
int count = 0;
foreach (IFace face in faces)
{
if (checkUserBreak.Check() == true)
{
return(-1);
}
if (m_bUsingProgress)
{
m_ctrlProgress.PB_ProgressCurrNum = ++count;
}
// Create a new TriObject for each new face.
object objectNewFace = ip.CreateInstance(SClass_ID.Geomobject, cid as IClass_ID);
// Create a new node to hold it in the scene.
IObject objNewFace = (IObject)objectNewFace;
IINode n = global.COREInterface.CreateObjectNode(objNewFace);
// Name it and ensure it is unique...
string newname = "ADN-Sample-Face";
ip.MakeNameUnique(ref newname);
n.Name = newname;
// Based on what we created above, we can safely cast it to TriObject
ITriObject triNewFace = objNewFace as ITriObject;
// Setup the new TriObject with 1 face, and the vertex count from the original object's face we are processing
triNewFace.Mesh.SetNumFaces(1, false, false);
triNewFace.Mesh.SetNumVerts(face.V.Count(), false, false);
// Finish setting up the face (always face '0' because there will only be one per object).
triNewFace.Mesh.Faces[0].SetVerts(0, 1, 2);
triNewFace.Mesh.Faces[0].SetEdgeVisFlags(EdgeVisibility.Vis, EdgeVisibility.Vis, EdgeVisibility.Vis);
triNewFace.Mesh.Faces[0].SmGroup = 2;
// Now, for each vertex, get the old face's points and store into new.
for (int i = 0; i < face.V.Count(); i++)
{
//Get the vertex from the original object's face we are processing
IPoint3 point = triOriginal.Mesh.GetVert((int)face.GetVert(i));
// Set the vertex point in the new face vertex
triNewFace.Mesh.SetVert(i, point);
}
// make it draw.
triNewFace.Mesh.InvalidateGeomCache();
if (addShell)
{
AddOsmShell(n.Handle, shell);
}
if (addEditMesh)
{
AddOsmEditMesh(n.Handle);
}
if (collapseNode)
{
ip.CollapseNode(n, true);
}
// update transform to match object being exploded.
n.SetNodeTM(0, mat);
n.ObjOffsetPos = ptOffsetPos;
n.ObjOffsetRot = quatOffsetRot;
n.ObjOffsetScale = scaleOffsetScale;
n.ObjOffsetPos = ptOffsetPos;
if (centerPivot)
{
n.CenterPivot(0, false);
}
}
}
catch (Exception)
{
return(-1);
}
return(1);
}
/// <summary>
/// This is the routine to convert the input node to polygon faces.
/// </summary>
/// <param name="nodeHandle"> Input the node by handle. </param>
/// <param name="convertToTri"> Input whether to convert to a poly object first. </param>
/// <param name="addShell"> Input whether to add the shell modifier when finished converting to face. </param>
/// <param name="shell"> Input the shell thickness amount. </param>
/// <param name="addEditMesh"> Input whether to add the Edit Mesh modifier when finished converting to face. </param>
/// <param name="collapseNode"> Input whether to collapse the node afterwards. </param>
/// <param name="centerPivot"> Input whether to center the pivot on each new face. </param>
/// <returns> Returns 1 if successful or -1 if not. </returns>
static public int ConvertToPolygonFaces(uint nodeHandle,
bool convertToPoly = true, // C# now supports default parameters
bool addShell = true,
float shell = 0.1f,
bool addEditMesh = true,
bool collapseNode = true,
bool centerPivot = true)
{
try
{
IGlobal global = Autodesk.Max.GlobalInterface.Instance;
IInterface14 ip = global.COREInterface14;
IINode node = ip.GetINodeByHandle(nodeHandle);
if (node == null)
{
return(-1);
}
// Get it's current object state. If a modifier has been applied, for example,
// it is going to return the OS of the mesh in it's current form in the timeline.
IObjectState os = node.ObjectRef.Eval(ip.Time);
// Now grab the object itself.
IObject objOriginal = os.Obj;
IPolyObject polyObject = objOriginal as IPolyObject;
IClass_ID cid = global.Class_ID.Create((uint)BuiltInClassIDA.POLYOBJ_CLASS_ID, 0);
IPolyObject polyObj = ip.CreateInstance(SClass_ID.Geomobject, cid as IClass_ID) as IPolyObject;
if (polyObject == null && convertToPoly)
{
if (objOriginal.CanConvertToType(global.TriObjectClassID) == 1)
{
objOriginal = objOriginal.ConvertToType(ip.Time, global.TriObjectClassID);
}
else
{
return(-1);
}
ITriObject triOriginal = objOriginal as ITriObject;
polyObj.Mesh.AddTri(triOriginal.Mesh);
polyObj.Mesh.FillInMesh();
polyObj.Mesh.EliminateBadVerts(0);
polyObj.Mesh.MakePolyMesh(0, true);
}
else if (polyObject == null)
{
polyObj = polyObject;
}
else
{
return(-1);
}
IMatrix3 mat = node.GetNodeTM(0, null);
IPoint3 ptOffsetPos = node.ObjOffsetPos;
IQuat quatOffsetRot = node.ObjOffsetRot;
IScaleValue scaleOffsetScale = node.ObjOffsetScale;
// We can grab the faces as a List and iterate them in .NET API.
int nNumFaces = polyObj.Mesh.FNum;
if (m_bUsingProgress)
{
m_ctrlProgress.PB_ProgressMaxNum = nNumFaces;
}
ADN_UserBreakCheck checkUserBreak = new ADN_UserBreakCheck();
for (int i = 0; i < nNumFaces; i++)
{
if (checkUserBreak.Check() == true)
{
return(-1);
}
if (m_bUsingProgress)
{
m_ctrlProgress.PB_ProgressCurrNum = i;
}
// Create a new poly object for each new face.
object objectNewFace = ip.CreateInstance(SClass_ID.Geomobject, cid as IClass_ID);
// Create a new node to hold it in the scene.
IObject objNewFace = (IObject)objectNewFace;
IINode n = global.COREInterface.CreateObjectNode(objNewFace);
// Name it and ensure it is unique...
string newname = "ADN-Sample-Face";
ip.MakeNameUnique(ref newname);
n.Name = newname;
// Based on what we created above, we can safely cast it to TriObject
IPolyObject polyNewFace = objNewFace as IPolyObject;
// Setup the new poly object with 1 face, and the vertex count from the original object's face we are processing
polyNewFace.Mesh.SetNumFaces(1);
polyNewFace.Mesh.SetMapNum(2);
IMNFace f = polyObj.Mesh.F(i);
polyNewFace.Mesh.F(0).Assign(f);
IMNFace fnew = polyNewFace.Mesh.F(0);
IList <int> vtx = f.Vtx;
polyNewFace.Mesh.SetNumVerts(vtx.Count);
for (int k = 0; k < vtx.Count; k++)
{
int nvindex = vtx[k];
IMNVert vert = polyObj.Mesh.V(nvindex);
Debug.Print("\nVertex = " + k + ", " + nvindex);
polyNewFace.Mesh.V(k).Assign(vert);
fnew.Vtx[k] = k;
}
int nedge = nedge = polyNewFace.Mesh.SimpleNewEdge(0, 1);
IMNEdge edge = polyNewFace.Mesh.E(nedge);
edge.Track = -1;
edge.F1 = 0;
edge.F2 = -1;
polyNewFace.Mesh.SetEdgeVis(nedge, true);
nedge = polyNewFace.Mesh.SimpleNewEdge(1, 2);
edge = polyNewFace.Mesh.E(nedge);
edge.Track = -1;
edge.F1 = 0;
edge.F2 = -1;
polyNewFace.Mesh.SetEdgeVis(nedge, true);
nedge = polyNewFace.Mesh.SimpleNewEdge(2, 3);
edge = polyNewFace.Mesh.E(nedge);
edge.Track = -1;
edge.F1 = 0;
edge.F2 = -1;
polyNewFace.Mesh.SetEdgeVis(nedge, true);
nedge = polyNewFace.Mesh.SimpleNewEdge(3, 0);
edge = polyNewFace.Mesh.E(nedge);
edge.Track = -1;
edge.F1 = 0;
edge.F2 = -1;
polyNewFace.Mesh.SetEdgeVis(nedge, true);
polyNewFace.Mesh.FillInMesh();
// make it update.
polyNewFace.Mesh.InvalidateGeomCache();
if (addShell)
{
AddOsmShell(n.Handle, shell);
}
if (addEditMesh)
{
AddOsmEditMesh(n.Handle);
}
if (collapseNode)
{
ip.CollapseNode(n, true);
}
// update transform to match object being exploded.
n.SetNodeTM(0, mat);
n.ObjOffsetPos = ptOffsetPos;
n.ObjOffsetRot = quatOffsetRot;
n.ObjOffsetScale = scaleOffsetScale;
n.ObjOffsetPos = ptOffsetPos;
if (centerPivot)
{
n.CenterPivot(0, false);
}
}
}
catch (Exception ex)
{
Debug.Print(ex.Message);
return(-1);
}
return(1);
}
static public string UpdateNodes(float vertexPercent, bool keepNormals, bool collapseStack)
{
IGlobal globalInterface = Autodesk.Max.GlobalInterface.Instance;
IInterface14 coreInterface = globalInterface.COREInterface14;
// start the scene process
globalInterface.TheHold.Begin();
IINode nodeRoot = coreInterface.RootNode;
m_sceneNodes.Clear();
GetSceneNodes(nodeRoot);
List <IINode> optimizedNodes = new List <IINode> {
};
// Iterate each node in the scene file and process all meshes into ProOptimized meshes.
foreach (IINode node in m_sceneNodes)
{
// Check for object assigned to node (could be something other than object)
if (node.ObjectRef != null)
{
IObjectState os = node.ObjectRef.Eval(coreInterface.Time);
IObject objOriginal = os.Obj;
if (!objOriginal.IsSubClassOf(globalInterface.TriObjectClassID))
{
// If it is NOT, see if we can convert it...
if (objOriginal.CanConvertToType(globalInterface.TriObjectClassID) == 1)
{
objOriginal = objOriginal.ConvertToType(coreInterface.Time, globalInterface.TriObjectClassID);
}
else
{
RuntimeExecute.LogTrace("\nNode {0} Object Not Converted Error: {1}", node.NodeName, objOriginal.ObjectName);
continue;
}
}
ITriObject tri = objOriginal as ITriObject;
if (tri == null)
{
RuntimeExecute.LogTrace("\nNode {0} Object Not Converted Error: {1}", node.NodeName, objOriginal.ObjectName);
continue;
}
int val = tri.Mesh.NumVerts;
AddOsmProoptimizer(node, vertexPercent, keepNormals);
// get new mesh state
os = node.ObjectRef.Eval(coreInterface.Time);
tri = os.Obj as ITriObject;
// ** after modifier operation we can see if success by checking if the mesh size is different than before
if (val != tri.Mesh.NumVerts)
{
if (collapseStack)
{
coreInterface.CollapseNode(node, true);
}
optimizedNodes.Add(node);
}
}
}
int status;
if (optimizedNodes.Count() > 0)
{
// Build result file name based on percentage used
string full_filename = coreInterface.CurFilePath;
string filename = coreInterface.CurFileName;
vertexPercent = vertexPercent * 100;
string stringVertexPercent = vertexPercent.ToString("F1");
stringVertexPercent = stringVertexPercent.Replace('.', '_');
string output = "outputFile-" + stringVertexPercent + ".max";
string new_filename = full_filename.Replace(filename, output);
status = coreInterface.SaveToFile(new_filename, true, false);
// setup to export as FBX as well
string outputFBX = new_filename.Replace(".max", ".fbx");
string msCmdFbxExport = "exportFile \"" + outputFBX + "\" #noPrompt using:FBXEXP";
bool fbxOk = globalInterface.ExecuteMAXScriptScript(msCmdFbxExport, false, null, false);
// If we changed something, put scene back for next iteration
globalInterface.TheHold.Cancel();
if ((status == 0) || (fbxOk == false)) // error saving max or fbx file
{
return(null);
}
return(new_filename);
}
return(null);
}