private void CheckForFishErrorDialog(IInteractionProvider provider)
{
// Check if a dialog appeared, which means we don't have any more jelly beans or
// the fish bucket is full.
var screenshot = provider.GetCurrentWindowScreenshot();
bool foundDialog = true;
foreach (var point in fishErrorDialogCoordinates)
{
if (!CompareColor(fishDialogColor, screenshot.GetPixel(
screenshot.WindowPosition.ScaleCoordinates(point, MouseHelpers.ReferenceWindowSize)), 4))
{
foundDialog = false;
break;
}
}
if (foundDialog)
{
throw new InvalidOperationException(
"Either your fish bucket is full or you don't have any more jellybeans for bait.");
}
}
public override sealed async Task RunAsync(IInteractionProvider provider)
{
// Cast the fishing rod
OnActionInformationUpdated("Casting…");
await StartCastFishingRodAsync(provider);
await FinishCastFishingRodAsync(provider);
// Then, wait until we find a window displaying the caught fish
// or the specified number of seconds has passed.
OnActionInformationUpdated("Waiting for the fish result dialog…");
var sw = new Stopwatch();
sw.Start();
bool found = false;
while (!found && sw.ElapsedMilliseconds <= this.WaitingForFishResultDialogTime)
{
await provider.WaitAsync(500);
// Get a current screenshot.
var screenshot = provider.GetCurrentWindowScreenshot();
foreach (var c in fishResultDialogCoordinates)
{
var cc = screenshot.WindowPosition.ScaleCoordinates(
c, MouseHelpers.ReferenceWindowSize);
var col = screenshot.GetPixel(cc);
if (CompareColor(fishDialogColor, col, 10))
{
// OK, we caught a fish, so break from the loop.
found = true;
break;
}
}
}
}
public override sealed async Task RunAsync(IInteractionProvider provider)
{
// Cast the fishing rod
OnActionInformationUpdated("Casting…");
await StartCastFishingRodAsync(provider);
await FinishCastFishingRodAsync(provider);
// Then, wait until we find a window displaying the caught fish
// or the specified number of seconds has passed.
OnActionInformationUpdated("Waiting for the fish result dialog…");
Stopwatch sw = new Stopwatch();
sw.Start();
bool found = false;
while (!found && sw.ElapsedMilliseconds <= WaitingForFishResultDialogTime)
{
await provider.WaitAsync(500);
// Get a current screenshot.
var screenshot = provider.GetCurrentWindowScreenshot();
foreach (Coordinates c in fishResultDialogCoordinates)
{
var cc = screenshot.WindowPosition.ScaleCoordinates(
c, MouseHelpers.ReferenceWindowSize);
var col = screenshot.GetPixel(cc);
if (CompareColor(fishDialogColor, col, 10))
{
// OK, we caught a fish, so break from the loop.
found = true;
break;
}
}
}
}
protected override sealed async Task FinishCastFishingRodAsync(IInteractionProvider provider)
{
// Try to find a bubble.
const string actionInformationScanning = "Scanning for fish bubbles…";
OnActionInformationUpdated(actionInformationScanning);
const int scanStep = 15;
Stopwatch sw = new Stopwatch();
sw.Start();
Coordinates? oldCoords = null;
Coordinates? newCoords;
int coordsMatchCounter = 0;
while (true)
{
var screenshot = provider.GetCurrentWindowScreenshot();
newCoords = null;
// TODO: The fish bubble detection should be changed so that it does not scan
// for a specific color, but instead checks that for a point if the color is
// darker than the neighbor pixels (in some distance).
for (int y = spotData.Scan1.Y; y <= spotData.Scan2.Y && !newCoords.HasValue; y += scanStep)
{
for (int x = spotData.Scan1.X; x <= spotData.Scan2.X; x += scanStep)
{
var c = new Coordinates(x, y);
c = screenshot.WindowPosition.ScaleCoordinates(c,
MouseHelpers.ReferenceWindowSize);
if (CompareColor(spotData.BubbleColor, screenshot.GetPixel(c),
spotData.Tolerance))
{
newCoords = new Coordinates(x + 20, y + 20);
Coordinates scaledCoords = screenshot.WindowPosition.RelativeToAbsoluteCoordinates(
screenshot.WindowPosition.ScaleCoordinates(
newCoords.Value, MouseHelpers.ReferenceWindowSize));
OnActionInformationUpdated($"Found bubble at {scaledCoords.X}, {scaledCoords.Y}…");
break;
}
}
}
if (!newCoords.HasValue)
OnActionInformationUpdated(actionInformationScanning);
if (newCoords.HasValue && oldCoords.HasValue
&& Math.Abs(oldCoords.Value.X - newCoords.Value.X) <= scanStep
&& Math.Abs(oldCoords.Value.Y - newCoords.Value.Y) <= scanStep)
{
// The new coordinates are (nearly) the same as the previous ones.
coordsMatchCounter++;
}
else
{
// Reset the counter and update the coordinates even if we currently didn't
// find them.
oldCoords = newCoords;
coordsMatchCounter = 0;
}
// Now position the mouse already so that we just need to release the button.
if (!newCoords.HasValue)
{
// If we couldn't find the bubble we use default destination x,y values.
newCoords = new Coordinates(800, 1009);
}
else
{
// Calculate the destination coordinates.
newCoords = new Coordinates(
(int)Math.Round(800d + 120d / 429d * (800d - newCoords.Value.X) *
(0.75 + (820d - newCoords.Value.Y) / 820 * 0.38)),
(int)Math.Round(846d + 169d / 428d * (820d - newCoords.Value.Y))
);
}
// Note: Instead of using a center position for scaling the X coordinate,
// TTR seems to interpret it as being scaled from an 4/3 ratio. Therefore
// we need to specify "NoAspectRatio" here.
// However it could be that they will change this in the future, then
// we would need to use "Center".
// Note: We assume the point to click on is exactly centered. Otherwise
// we would need to adjust the X coordinate accordingly.
var coords = screenshot.WindowPosition.RelativeToAbsoluteCoordinates(
screenshot.WindowPosition.ScaleCoordinates(newCoords.Value,
MouseHelpers.ReferenceWindowSize, VerticalScaleAlignment.NoAspectRatio));
provider.MoveMouse(coords);
if (coordsMatchCounter == 2)
{
// If we found the same coordinates two times, we assume
// the bubble is not moving at the moment.
break;
}
await provider.WaitAsync(500);
// Ensure we don't wait longer than 36 seconds.
if (sw.ElapsedMilliseconds >= 36000)
break;
}
// There is no need to wait here because the mouse has already been positioned and we
// waited at least 2x 500 ms at the new position, so now just release the mouse button.
provider.ReleaseMouseButton();
}
private void CheckForFishErrorDialog(IInteractionProvider provider)
{
// Check if a dialog appeared, which means we don't have any more jelly beans or
// the fish bucket is full.
var screenshot = provider.GetCurrentWindowScreenshot();
bool foundDialog = true;
foreach (var point in fishErrorDialogCoordinates)
{
if (!CompareColor(fishDialogColor, screenshot.GetPixel(
screenshot.WindowPosition.ScaleCoordinates(point, MouseHelpers.ReferenceWindowSize)), 4))
{
foundDialog = false;
break;
}
}
if (foundDialog)
{
throw new InvalidOperationException(
"Either your fish bucket is full or you don't have any more jellybeans for bait.");
}
}
protected override sealed async Task FinishCastFishingRodAsync(IInteractionProvider provider)
{
// Try to find a bubble.
const string actionInformationScanning = "Scanning for fish bubbles…";
OnActionInformationUpdated(actionInformationScanning);
const int scanStep = 15;
var sw = new Stopwatch();
sw.Start();
Coordinates?oldCoords = null;
Coordinates?newCoords;
int coordsMatchCounter = 0;
while (true)
{
var screenshot = provider.GetCurrentWindowScreenshot();
newCoords = null;
// TODO: The fish bubble detection should be changed so that it does not scan
// for a specific color, but instead checks that for a point if the color is
// darker than the neighbor pixels (in some distance).
for (int y = this.spotData.Scan1.Y; y <= this.spotData.Scan2.Y && !newCoords.HasValue; y += scanStep)
{
for (int x = this.spotData.Scan1.X; x <= this.spotData.Scan2.X; x += scanStep)
{
var c = new Coordinates(x, y);
c = screenshot.WindowPosition.ScaleCoordinates(c,
MouseHelpers.ReferenceWindowSize);
if (CompareColor(this.spotData.BubbleColor, screenshot.GetPixel(c),
this.spotData.Tolerance))
{
newCoords = new Coordinates(x + 20, y + 20);
var scaledCoords = screenshot.WindowPosition.ScaleCoordinates(
newCoords.Value, MouseHelpers.ReferenceWindowSize);
OnActionInformationUpdated($"Found bubble at {scaledCoords.X}, {scaledCoords.Y}…");
break;
}
}
}
if (!newCoords.HasValue)
{
OnActionInformationUpdated(actionInformationScanning);
}
if (newCoords.HasValue && oldCoords.HasValue &&
Math.Abs(oldCoords.Value.X - newCoords.Value.X) <= scanStep &&
Math.Abs(oldCoords.Value.Y - newCoords.Value.Y) <= scanStep)
{
// The new coordinates are (nearly) the same as the previous ones.
coordsMatchCounter++;
}
else
{
// Reset the counter and update the coordinates even if we currently didn't
// find them.
oldCoords = newCoords;
coordsMatchCounter = 0;
}
// Now position the mouse already so that we just need to release the button.
if (!newCoords.HasValue)
{
// If we couldn't find the bubble we use default destination x,y values.
newCoords = new Coordinates(800, 1009);
}
else
{
// Calculate the destination coordinates.
newCoords = new Coordinates(
(int)Math.Round(800d + 120d / 429d * (800d - newCoords.Value.X) *
(0.75 + (820d - newCoords.Value.Y) / 820 * 0.38)),
(int)Math.Round(846d + 169d / 428d * (820d - newCoords.Value.Y))
);
}
// Note: Instead of using a center position for scaling the X coordinate,
// TTR seems to interpret it as being scaled from an 4/3 ratio. Therefore
// we need to specify "NoAspectRatio" here.
// However it could be that they will change this in the future, then
// we would need to use "Center".
// Note: We assume the point to click on is exactly centered. Otherwise
// we would need to adjust the X coordinate accordingly.
var coords = screenshot.WindowPosition.ScaleCoordinates(newCoords.Value,
MouseHelpers.ReferenceWindowSize, VerticalScaleAlignment.NoAspectRatio);
provider.MoveMouse(coords);
if (coordsMatchCounter == 2)
{
// If we found the same coordinates two times, we assume
// the bubble is not moving at the moment.
break;
}
await provider.WaitAsync(500);
// Ensure we don't wait longer than 36 seconds.
if (sw.ElapsedMilliseconds >= 36000)
{
break;
}
}
// There is no need to wait here because the mouse has already been positioned and we
// waited at least 2x 500 ms at the new position, so now just release the mouse button.
provider.ReleaseMouseButton();
}