public void Execute(IPCBIWindow parent)
{
IStep step = parent.GetCurrentStep();
if (step == null)
{
return;
}
//the symbol diameter selected by user
float diameterReplacedSymbolsInMils = 1;
foreach (ILayer activeLayer in step.GetActiveLayerList())
{
if (!(activeLayer is IODBLayer)) //component and picture layer irrelevant
{
continue;
}
IODBLayer Layer = (IODBLayer)activeLayer;
int symbolIndex = -1;
IFilter.AddToolDefinitionRound(Layer, diameterReplacedSymbolsInMils);
foreach (IODBObject obj in Layer.GetAllLayerObjects())
{
if (obj.GetDiameter() == 0) //all elements with diameter 0 replaced by new symbol
{
if (symbolIndex < 0)
{
symbolIndex = IFilter.AddToolDefinitionRound(Layer, diameterReplacedSymbolsInMils); //add new symbol only if used
}
obj.SetSpecifics(obj.GetSpecificsD(), symbolIndex);
}
}
}
}
private void CopyAllViasToNewLayer(IPCBIWindow parent, string layerName, string newLayerName)
{
IStep curStep = parent.GetCurrentStep();
if (curStep == null)
{
MessageBox.Show("No Job loaded, please load a job before start this script!", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
return;
}
ILayer relevantLayer = curStep.GetLayer(layerName);
ILayer NewLayer = curStep.GetLayer(newLayerName);
if (NewLayer == null || relevantLayer == null || !(NewLayer is IODBLayer))
{
MessageBox.Show("Check Layers, something is wrong!", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
List <IODBObject> ViaList = new List <IODBObject>();
//check all elements for via attribute
foreach (IObject obj in relevantLayer.GetAllLayerObjects())
{
if (obj is IODBObject)
{
if (((IODBObject)obj).Type == IObjectType.Pad)
{
Dictionary <PCBI.FeatureAttributeEnum, string> attributesOfPad = ((IODBObject)obj).GetAttributesDictionary();
if (attributesOfPad.ContainsKey(PCBI.FeatureAttributeEnum.pad_usage))
{
if (attributesOfPad[PCBI.FeatureAttributeEnum.pad_usage] == "via")
{
ViaList.Add((IODBObject)obj);
}
}
}
}
}
IFilter filter = new IFilter(parent); //to create copies on new layer
//add vias to new layer
foreach (IODBObject viaPad in ViaList)
{
IPadSpecificsD padInfo = (IPadSpecificsD)viaPad.GetSpecificsD();
int toolNr = IFilter.AddToolDefinitionRound((IODBLayer)NewLayer, (float)padInfo.Diameter, -1);
IODBObject newViaPad = filter.CreatePad((IODBLayer)NewLayer);
newViaPad.SetSpecifics(padInfo, toolNr);
newViaPad.SetAttribute("pad_usage=via");
}
}
public void CreateCopperLines()
{
IFilter filter = new IFilter(Parent);
IStep curStep = Parent.GetCurrentStep();
if (curStep == null)
{
MessageBox.Show("No Job loaded, please load a job before start this script!", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
return;
}
IODBLayer fiducialLayer = filter.CreateEmptyODBLayer("copper", curStep.Name);
if (fiducialLayer == null)
{
MessageBox.Show("Can't create new layer!", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
return;
}
float outerDiameter = 1800;
int shapeIndex = IFilter.AddToolDefinitionRound(fiducialLayer, outerDiameter / 25.4f, 0);
PCBI.MathUtils.PointD startLine = new PCBI.MathUtils.PointD(0, 0);
float distance = 2540 / 25.4f;
for (int y = 0; y < 39; y++)
{
float lastX = 0;
for (int i = 0; i < 63; i++)
{
IODBObject line = filter.CreateLine(fiducialLayer);
ILineSpecificsD ps = new ILineSpecificsD();
ps.Start = new PCBI.MathUtils.PointD(startLine.X, startLine.Y);
float lineEnd = lastX + distance;
ps.End = new PCBI.MathUtils.PointD(lineEnd, startLine.Y);
lastX = lineEnd;
ps.ShapeIndex = shapeIndex;
ps.Positive = true;
line.SetSpecifics(ps);
startLine.X += distance;
}
startLine.Y += distance;
startLine.X = 0;
}
IMatrix matrix = Parent.GetMatrix();
matrix.UpdateDataAndList();
Parent.UpdateView();
}
/// <summary>
/// Helper to create Symbols only once.
/// </summary>
private static int CheckShapeIndexRound(IFilter pcbiFilter, IODBLayer parentLayer, float thickness)
{
int shapeIndex = -1;
Dictionary <int, PCBI.Automation.IFilter.ToolDefinition> symbolList = pcbiFilter.GetUsedSymbolList(parentLayer);
foreach (KeyValuePair <int, PCBI.Automation.IFilter.ToolDefinition> symbs in symbolList)
{
if (symbs.Value.Diameter == thickness &&
symbs.Value.Type == PCBI.Symbol_Type.r)
{
return(symbs.Key);
}
}
shapeIndex = IFilter.AddToolDefinitionRound(parentLayer, thickness);
return(shapeIndex);
}
public void Execute(IPCBIWindow parent)
{
string PackageName = "TESTPUNKT";
bool topSide = true;
bool useFlattenStep = true;
if (!parent.JobIsLoaded)
{
return;
}
IFilter filter = new IFilter(parent);
IStep step = parent.GetCurrentStep();
IMatrix matrix = parent.GetMatrix();
if (matrix == null)
{
return;
}
step.TurnOffAllLayer();
step.ClearSelection();
//nicht für flatten step, da durch Threads zu langsam und dann evtl die neuen Daten wieder gelöscht werden!
if (!useFlattenStep)
{
matrix.DelateLayer("testpoint_locations_top", false);
matrix.DelateLayer("testpoint_locations_bot", false);
}
if (topSide)
{
CreateForOneSide(true, step, filter, PackageName, matrix.GetAllDrillLayersForThisLayer(matrix.GetTopSignalLayer()));
}
else
{
CreateForOneSide(false, step, filter, PackageName, matrix.GetAllDrillLayersForThisLayer(matrix.GetBotSignalLayer()));
}
//gitter 500x500
IODBLayer rasterLayer = filter.CreateEmptyODBLayer("raster", step.Name);
int shapeIndex = IFilter.AddToolDefinitionRound(rasterLayer, 10);
RectangleF boundsStep = step.GetBounds();
int countYLines = (int)(boundsStep.Height / 500) + 1;
int countXLines = (int)(boundsStep.Width / 500) + 1;
for (int y = 0; y <= countYLines; y++)
{
for (int x = 0; x <= countXLines; x++)
{
for (int i = 0; i < 5; i++) //5 sublines
{
int yVal = y * 500;
int xVal = x * 500;
if (x < countXLines)
{
CreateHorLine(filter, rasterLayer, shapeIndex, yVal, xVal + i * 100 + 25);
}
if (y < countYLines)
{
CreateVertLine(filter, rasterLayer, shapeIndex, yVal + i * 100 + 25, xVal);
}
}
}
}
for (int y = 0; y < countYLines; y++)
{
#region draw text
IODBObject textForPad = filter.CreateText(rasterLayer);
ITextSpecificsD text = (ITextSpecificsD)textForPad.GetSpecificsD();
text.Text = "Y" + (y + 1);
text.TextSize = new SizeF(50, 80);
text.Location = new PCBI.MathUtils.PointD(-120, y * 500 + 200);
text.WidthFactor = 1;
textForPad.SetSpecifics(text);
//right side
IODBObject textForPad2 = filter.CreateText(rasterLayer);
ITextSpecificsD text2 = (ITextSpecificsD)textForPad.GetSpecificsD();
text2.Text = text.Text;
text2.TextSize = new SizeF(50, 80);
text2.Location = new PCBI.MathUtils.PointD(countXLines * 500 + 120, y * 500 + 200);
text2.WidthFactor = 1;
textForPad2.SetSpecifics(text2);
}
for (int x = 0; x < countXLines; x++)
{
IODBObject textForPad = filter.CreateText(rasterLayer);
ITextSpecificsD text = (ITextSpecificsD)textForPad.GetSpecificsD();
text.Text = "X" + (x + 1);
text.TextSize = new SizeF(50, 80);
text.Location = new PCBI.MathUtils.PointD(x * 500 + 200, -100);
text.Rotation = -90;
text.WidthFactor = 1;
textForPad.SetSpecifics(text);
//top side
IODBObject textForPad2 = filter.CreateText(rasterLayer);
ITextSpecificsD text2 = (ITextSpecificsD)textForPad.GetSpecificsD();
text2.Text = text.Text;
text2.TextSize = new SizeF(50, 80);
text2.Location = new PCBI.MathUtils.PointD(x * 500 + 300, countYLines * 500 + 100);
text2.Rotation = 90;
text2.WidthFactor = 1;
textForPad2.SetSpecifics(text2);
#endregion
}
foreach (string drillName in matrix.GetAllDrillLayerNames())
{
IODBLayer drillLayer = (IODBLayer)step.GetLayer(drillName);
foreach (IODBObject drill in drillLayer.GetAllLayerObjects())
{
Dictionary <PCBI.FeatureAttributeEnum, string> attribs = drill.GetAttributesDictionary();
if (drill.Type == IObjectType.Pad && attribs.ContainsKey(PCBI.FeatureAttributeEnum.drill) && attribs.ContainsKey(PCBI.FeatureAttributeEnum.geometry))
{
if (attribs[PCBI.FeatureAttributeEnum.drill].ToUpperInvariant() == "NON_PLATED" && attribs[PCBI.FeatureAttributeEnum.geometry].ToUpperInvariant() == "ICTAUFNAHME")
{
IODBObject drillMarker = filter.CreatePad(rasterLayer);
IPadSpecificsD drillSpec = (IPadSpecificsD)drill.GetSpecificsD();
int shapeIndexNew = IFilter.AddToolDefinitionRound(rasterLayer, (float)drillSpec.Diameter);
drillSpec.ShapeIndex = shapeIndexNew;
drillMarker.SetSpecifics(drillSpec);
}
}
}
}
matrix.UpdateDataAndList();
if (!useFlattenStep)
{
parent.UIAction.Execute(ID_ActionItem.ID_PRINT_PREVIEW);
}
}
void CreateForOneSide(bool top, IStep step, IFilter filter, string PackageName, List <string> DrillLayers)
{
ICMPLayer compLayer = step.GetCMPLayer(top);
if (compLayer == null)
{
return;
}
IODBLayer newLayer = filter.CreateEmptyODBLayer("testpoint_locations_" + (top ? "top" : "bot"), step.Name);
if (newLayer == null)
{
return;
}
List <IODBLayer> allDrillLayers = new List <IODBLayer>();
foreach (string drillName in DrillLayers)
{
allDrillLayers.Add((IODBLayer)step.GetLayer(drillName));
}
int shapeIndex = IFilter.AddToolDefinitionRound(newLayer, 75);
int shapeIndexConnection = IFilter.AddToolDefinitionRound(newLayer, 1);
foreach (ICMPObject cmp in compLayer.GetAllLayerObjects())
{
if (!cmp.UsedPackageName.Contains(PackageName))
{
continue;
}
IODBObject markerPad = filter.CreatePad(newLayer);
IPadSpecificsD pad = (IPadSpecificsD)markerPad.GetSpecificsD();
pad.Location = new PCBI.MathUtils.PointD(cmp.Position);
pad.ShapeIndex = shapeIndex;
markerPad.SetSpecifics(pad);
markerPad.ObjectColor = Color.Green;
markerPad.SetAttribute("Steel needle <BST> (Testpoint)");
bool special = false;
foreach (IODBLayer drillLayer in allDrillLayers)
{
#region check drills
foreach (IODBObject drill in drillLayer.GetAllObjectsOnPosition(cmp.Position))
{
Dictionary <PCBI.FeatureAttributeEnum, string> attribs = drill.GetAttributesDictionary();
if (attribs.ContainsKey(PCBI.FeatureAttributeEnum.drill))
{
if (attribs[PCBI.FeatureAttributeEnum.drill].ToUpperInvariant() == "VIA")
{
markerPad.ObjectColor = Color.Blue;
markerPad.SetAttribute("Pyramid <H> (Via)");
special = true;
break;
}
}
}
if (special)
{
break;
}
#endregion
}
if (!special)
{
//check for component pin
foreach (ICMPObject comp in compLayer.GetAllObjectsOnPosition(cmp.Position))
{
if (comp == cmp)
{
continue; //testpunkt selbst wird ignoriert
}
foreach (IPin pin in comp.GetPinList())
{
PCBI.MathUtils.IPolyClass cmpPoly = pin.GetPolygonOutline(comp);
if (cmpPoly.PointInPolygon(pad.Location))
{
markerPad.ObjectColor = Color.Red;
markerPad.SetAttribute("Serrated <C>"); //hier evtl noch überprüfen ob pin bzw. body drüber liegt?
special = true; //oder Serrated with overlapping plastic <CS>
break;
}
}
if (special)
{
break;
}
}
}
}
foreach (ICMPObject cmp in compLayer.GetAllLayerObjects()) //neue schleife da erst alle pads plaziert werden sollen!
{
if (!cmp.UsedPackageName.Contains(PackageName))
{
continue;
}
IODBObject textForPad = filter.CreateText(newLayer);
ITextSpecificsD text = (ITextSpecificsD)textForPad.GetSpecificsD();
text.Text = cmp.Ref.Remove(0, 2); //Annahme das alle mit TP beginnen
text.TextSize = new SizeF(25, 50);
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X + 50, cmp.Position.Y - 10);
text.WidthFactor = 0.6;
textForPad.SetSpecifics(text);
textForPad.ObjectColor = Color.DarkGray;
//text location should not be intersecting!
List <IObject> otherObjectsOnSameLocation = newLayer.GetAllObjectInRectangle(textForPad.GetBoundsD());
int offset = 50;
bool horChecked = false;
while (otherObjectsOnSameLocation.Count > 1)
{
//move text
if (horChecked)
{
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X, cmp.Position.Y + offset);
}
else
{
text.Location = new PCBI.MathUtils.PointD(cmp.Position.X - offset - textForPad.GetBoundsD().Width, cmp.Position.Y - 10);
}
offset += 50;
horChecked = true;
textForPad.SetSpecifics(text);
otherObjectsOnSameLocation = newLayer.GetAllObjectInRectangle(textForPad.GetBoundsD());
}
IODBObject connectionLine = filter.CreateLine(newLayer);
ILineSpecificsD line = (ILineSpecificsD)connectionLine.GetSpecificsD();
line.ShapeIndex = shapeIndexConnection;
line.Start = new PCBI.MathUtils.PointD(cmp.Position);
line.End = new PCBI.MathUtils.PointD(text.Location.X, text.Location.Y + 25);
connectionLine.SetSpecifics(line);
connectionLine.ObjectColor = Color.LightGray;
}
}
public void Execute(IPCBIWindow parent)
{
double sizeRouting = PCBI.MathUtils.IMath.MM2Mils(2); //2 mm
double sizeCutout = PCBI.MathUtils.IMath.MM2Mils(2); //2 mm
double spaceCutout = PCBI.MathUtils.IMath.MM2Mils(100); //100 mm
double lengthCutout = PCBI.MathUtils.IMath.MM2Mils(5); //5 mm
double sumUpLength = 0; //offset for start
IStep step = parent.GetCurrentStep();
if (step == null)
{
return;
}
PCBI.MathUtils.IPolyClass polyOfOutline = step.GetPCBOutlinePoly();
if (polyOfOutline.GetEdgeCount() == 0)
{
return;
}
IFilter filter = new IFilter(parent);
IODBLayer HelperLayer = filter.CreateEmptyODBLayer("rout_outline_helper", step.Name); //this helper layer contains the uncutted line elements
IODBLayer outlineLayerRouting = filter.CreateEmptyODBLayer("rout_outline", step.Name);
IODBLayer cutoutLayerRouting = filter.CreateEmptyODBLayer("rout_cutout", step.Name);
#region clean layers for multi use
List <IODBObject> objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in HelperLayer.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
HelperLayer.RemoveObjects(objListToRemove);
objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in cutoutLayerRouting.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
cutoutLayerRouting.RemoveObjects(objListToRemove);
objListToRemove = new List <IODBObject>();
foreach (IODBObject obj in outlineLayerRouting.GetAllLayerObjects())
{
objListToRemove.Add(obj);
}
outlineLayerRouting.RemoveObjects(objListToRemove);
#endregion
int shapeIndexOutlinediameter = IFilter.AddToolDefinitionRound(HelperLayer, (float)sizeRouting);
foreach (PCBI.MathUtils.IEdge edge in polyOfOutline.GetEdges())
{
#region outline elements
if (edge.Type == IEdgeType.Arc)
{
IODBObject newArc = filter.CreateArc(HelperLayer);
IArcSpecificsD arc = (IArcSpecificsD)newArc.GetSpecificsD();
arc.ClockWise = ((IArcEdge)edge).ClockWise;
if (arc.ClockWise)
{
arc.Start = edge.Begin;
arc.End = edge.End;
}
else
{
arc.End = edge.Begin;
arc.Start = edge.End;
}
arc.Center = ((PCBI.MathUtils.IArcEdge)edge).Center;
arc.ShapeIndex = shapeIndexOutlinediameter;
newArc.SetSpecifics(arc);
}
else
{
IODBObject newLine = filter.CreateLine(HelperLayer);
ILineSpecificsD line = (ILineSpecificsD)newLine.GetSpecificsD();
line.Start = edge.Begin;
line.End = edge.End;
line.ShapeIndex = shapeIndexOutlinediameter;
newLine.SetSpecifics(line);
}
#endregion
}
//make one surface of all lines and arcs
HelperLayer.CreateLayerNetList(true);
HelperLayer.PolygonizeLayer(0, false);
PointD lastPToIdentifyHole = PointD.InfPoint;
foreach (IODBObject surface in HelperLayer.GetAllLayerObjects())
{
#region replace surfaces by routing lines and arcs
if (surface.Type != IObjectType.Surface)
{
continue;
}
objListToRemove.Add(surface);
List <ISurfaceSpecificsD> isle = ((ISurfaceSpecificsD)surface.GetSpecificsD()).SplitInIsleAndHoles(parent);
if (isle.Count > 0)
{
for (int i = 0; i < isle.Count; i++)
{
bool foundelement = false;
foreach (IODBObject linesAndArcs in isle[i].GetOutline())
{
if (linesAndArcs.Type == IObjectType.Arc)
{
#region arc
IODBObject newArc = filter.CreateArc(HelperLayer);
IArcSpecificsD arc = (IArcSpecificsD)linesAndArcs.GetSpecificsD();
if (lastPToIdentifyHole == PointD.InfPoint || !(lastPToIdentifyHole != arc.Start && lastPToIdentifyHole != arc.End))
{
lastPToIdentifyHole = arc.End;
}
else
{
break;
}
newArc.SetSpecifics(arc);
#endregion
}
else
{
#region line
IODBObject newLine = filter.CreateLine(HelperLayer);
ILineSpecificsD line = (ILineSpecificsD)linesAndArcs.GetSpecificsD();
if (lastPToIdentifyHole == PointD.InfPoint || line.Start == lastPToIdentifyHole)
{
lastPToIdentifyHole = line.End;
}
else
{
break;
}
newLine.SetSpecifics(line);
#endregion
}
foundelement = true;
}
if (foundelement)
{
break;
}
}
}
#endregion
}
HelperLayer.RemoveObjects(objListToRemove); //surface remove
int shapeIndexCutoutdiameter = IFilter.AddToolDefinitionRound(outlineLayerRouting, (float)sizeCutout);
int shapeIndexCutoutdiameter2 = IFilter.AddToolDefinitionRound(cutoutLayerRouting, (float)sizeCutout);
double sumUpGap = 0;
foreach (IODBObject lineOrArc in HelperLayer.GetAllLayerObjects())
{
if (lineOrArc.Type == IObjectType.Line)
{
#region lines
ILineSpecificsD line = (ILineSpecificsD)lineOrArc.GetSpecificsD();
double length = IMath.DistancePointToPoint(line.Start, line.End);
double lengthComplete = length;
while (true)
{
if (length <= lengthCutout)
{
#region short lines
sumUpLength += lengthCutout;
if (sumUpLength > spaceCutout)
{
sumUpGap += lengthCutout;
IODBObject lineObj = filter.CreateLine(cutoutLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter2;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length = 0;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
else
{
IODBObject lineObj = filter.CreateLine(outlineLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length = 0;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
break;
#endregion
}
else
{
#region long lines
sumUpLength += lengthCutout;
if (sumUpLength > spaceCutout || sumUpGap > 0)
{
sumUpGap += lengthCutout;
IODBObject lineObj = filter.CreateLine(cutoutLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter2;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length -= lengthCutout;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
else
{
IODBObject lineObj = filter.CreateLine(outlineLayerRouting);
ILineSpecificsD lineSub = (ILineSpecificsD)lineOrArc.GetSpecificsD();
lineSub.ShapeIndex = shapeIndexCutoutdiameter;
lineSub.Start = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
length -= lengthCutout;
lineSub.End = IMath.GetPointOnLine(line.Start, line.End, lengthComplete - length);
lineObj.SetSpecifics(lineSub);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, lineObj);
}
#endregion
}
}
#endregion
}
else if (lineOrArc.Type == IObjectType.Arc)
{
#region arcs
IArcSpecificsD arc = (IArcSpecificsD)lineOrArc.GetSpecificsD();
double arcLength = IMath.DistancePointToPoint(arc.Start, arc.End);
sumUpLength += arcLength;
if (sumUpLength > spaceCutout || sumUpGap > 0)
{
sumUpGap += arcLength;
IODBObject arcObj = filter.CreateArc(cutoutLayerRouting);
arc.ShapeIndex = shapeIndexCutoutdiameter2;
arcObj.SetSpecifics(arc);
if (sumUpGap > lengthCutout)
{
sumUpGap = 0;
sumUpLength = 0;
}
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, arcObj);
}
else
{
IODBObject arcObj = filter.CreateArc(outlineLayerRouting);
arc.ShapeIndex = shapeIndexCutoutdiameter;
arcObj.SetSpecifics(arc);
IAttributeElement attribRoutningComp = new IAttributeElement(PCBI.FeatureAttributeEnum.comp);
attribRoutningComp.Value = "none";
IAttribute.SetAttribute(attribRoutningComp, arcObj);
}
#endregion
}
}
//additional attributes are .feed, .speed, .rout_flag, .comp. and .rout_chain
IMatrix matrix = parent.GetMatrix();
if (matrix != null)
{
matrix.UpdateDataAndList();
}
parent.UpdateView();
}