protected override (ulong, ulong) ConsiderCode(IFileFormatReader image, uint loc)
{
// Setup
var buffSize = 0x76; // minimum number of bytes to process the longest expected function
var leaSize = 7; // the length of an LEA instruction with a 64-bit register operand and a 32-bit memory operand
var xor64Size = 3; // the length of a XOR instruction of two 64-bit registers
var xor32Size = 2; // the length of a XOR instruction of two 32-bit registers
var pushSize = 2; // the length of a PUSH instruction with a 64-bit register
var offset = 0;
int RAX = 0, RBX = 3, RCX = 1, RDX = 2, RSI = 6, RDI = 7; // R8 = 8
ulong pCgr = 0; // the point to the code registration function
image.Position = loc;
var buff = image.ReadBytes(buffSize);
// We have seen two versions of the initializer:
// 1. Regular version
// 2. Inlined version with il2cpp::utils::RegisterRuntimeInitializeAndCleanup(CallbackFunction, CallbackFunction, order)
// Version 1 passes "this" in rcx and the arguments in rdx (our wanted pointer), r8d (always zero) and r9d (always zero)
// or "this" in rdi, and the arguments in rsi (our wanted pointer), edx (always zero) and ecx (always zero)
// Version 2 has a standard prologue and loads the wanted pointer into rax or rbp (lea rax/rbp)
(int reg, uint operand)? lea;
// Check for regular version
// Generalize it as follows:
// - each instruction must be lea r64, imm32 or xor r32, r32
// - xors must always have the same register for both operands
// - lea that can't be mapped into the file is the pointer to 'this', otherwise it's the pointer to the init function
// - the last instruction should always be jmp (not currently enforced)
// - function length should not be longer than 5 instructions (two leas, two xors and one jmp)
offset = 0;
for (var instructions = 0; instructions < 4; instructions++)
{
// All allowed instruction types
var xor32 = getXorR32R32(buff, offset);
var xor64 = getXorR64R64(buff, offset);
lea = getLea(buff, offset);
if (xor32 != null && xor32.Value.reg_op1 == xor32.Value.reg_op2)
{
offset += xor32Size;
}
else if (xor64 != null && xor64.Value.reg_op1 == xor64.Value.reg_op2)
{
offset += xor64Size;
}
else if (lea != null)
{
offset += leaSize;
if (pCgr == 0)
{
try {
// We may have found Il2CppCodegenRegistration(void)
pCgr = image.GlobalOffset + loc + (ulong)offset + lea.Value.operand;
var newLoc = image.MapVATR(pCgr);
}
catch (InvalidOperationException) {
// this pointer
pCgr = 0;
}
}
}
else
{
// not lea or xor
pCgr = 0;
break;
}
}
// Check for inlined version
if (pCgr == 0)
{
// Check for prologue
// - A sequence of 0 or more mov [rsp+argX], rXX followed by 1 or more push rXX
offset = 0;
while (isMovRM64R64(buff, offset))
{
offset += 5;
}
if (isPushR64(buff, offset))
{
// Linear sweep for LEA
var leaInlined = findLea(buff, pushSize, buffSize - pushSize);
if (leaInlined != null)
{
pCgr = image.GlobalOffset + loc + (uint)leaInlined.Value.foundOffset + (uint)leaSize + leaInlined.Value.operand;
}
}
}
// Assume we've found the pointer to Il2CppCodegenRegistration(void) and jump there
if (pCgr != 0)
{
try {
Image.Position = Image.MapVATR(pCgr);
}
// Couldn't map virtual address to data in file, so it's not this function
catch (InvalidOperationException) {
pCgr = 0;
}
}
// Find the first 2 LEAs which we'll hope contain pointers to CodeRegistration and MetadataRegistration
// There are two options here:
// 1. il2cpp::vm::MetadataCache::Register is called directly with arguments in rcx, rdx, r8 or rdi, rsi, rdx (lea, lea, lea, jmp)
// 2. The two functions being inlined. The arguments are loaded sequentially into rax after the prologue
if (pCgr != 0)
{
var buff2Size = 0x50;
var buff2 = image.ReadBytes(buffSize);
offset = 0;
var leas = new Dictionary <(int index, ulong address), int>();
// Find the first three LEAs in the function
while (offset + leaSize < buff2Size && leas.Count < 3)
{
var nextLea = findLea(buff2, offset, buff2Size - (offset + leaSize));
// Use the original pointer found, not the file location + GlobalOffset because the data may be in a different section
if (nextLea != null)
{
leas.Add((leas.Count, pCgr + (uint)nextLea.Value.foundOffset + (uint)leaSize + nextLea.Value.operand), nextLea.Value.reg);
}
offset = nextLea?.foundOffset + leaSize ?? buff2Size;
}
if ((image.Version < 21 && leas.Count == 2) || (image.Version >= 21 && leas.Count == 3))
{
// Register-based argument passing?
var leaRSI = leas.FirstOrDefault(l => l.Value == RSI).Key.address;
var leaRDI = leas.FirstOrDefault(l => l.Value == RDI).Key.address;
if (leaRSI != 0 && leaRDI != 0)
{
return(leaRDI, leaRSI);
}
var leaRCX = leas.FirstOrDefault(l => l.Value == RCX).Key.address;
var leaRDX = leas.FirstOrDefault(l => l.Value == RDX).Key.address;
if (leaRCX != 0 && leaRDX != 0)
{
return(leaRCX, leaRDX);
}
// RAX sequential loading? If so, take the first two arguments
var leasRAX = leas.Where(l => l.Value == RAX).OrderBy(l => l.Key.index).Select(l => l.Key.address).ToArray();
if (leasRAX.Length > 1)
{
return(leasRAX[0], leasRAX[1]);
}
}
}
// If no initializer is found, we may be looking at a DT_INIT function which calls its own function table manually
// In the sample we have seen (PlayStation 4), this function runs through two function tables:
// 1. Start address of table loaded into rbx, pointer past end of table in r12 (lea rbx; lea r12)
// 2. Pointer to final address of 2nd table loaded into rbx (lea rbx), runs backwards (8 bytes per entry) until finding 0xFFFFFFFF_FFFFFFFF
// The strategy: find these LEAs, acquire and merge the two function tables, then call ourselves in a loop to check each function address
// Expect function prologue and at least 3 64-bit register pushes (there are probably more)
if (!isPrologue(buff) || !isPushR64(buff, 4) || !isPushR64(buff, 6) || !isPushR64(buff, 8))
{
return(0, 0);
}
// Find the start and end addresses of the first function table
var leaOfStart = findLea(buff, 10, buffSize - 10);
if (leaOfStart == null || leaOfStart.Value.reg != RBX) // Most be lea rbx
{
return(0, 0);
}
var leaOfEnd = findLea(buff, leaOfStart.Value.foundOffset + leaSize, buffSize - (leaOfStart.Value.foundOffset + leaSize));
if (leaOfEnd == null || leaOfEnd.Value.reg == RBX) // Must be lea with any register besides rbx
{
return(0, 0);
}
var ptrStart1 = leaOfStart.Value.foundOffset + leaSize + leaOfStart.Value.operand;
var ptrEnd1 = leaOfEnd.Value.foundOffset + leaSize + leaOfEnd.Value.operand;
// Find the address of the last item in the second function table
var leaOfLastItem = findLea(buff, leaOfEnd.Value.foundOffset + leaSize, buffSize - (leaOfEnd.Value.foundOffset + leaSize));
if (leaOfLastItem == null || leaOfLastItem.Value.reg != 0b11) // Must be lea rbx
{
return(0, 0);
}
var entrySize = 8; // 64-bit array entries
var ptrEnd2 = leaOfLastItem.Value.foundOffset + leaSize + leaOfLastItem.Value.operand + entrySize;
// Work backwards to find the address of the first item in the second function table
var ptrStart2 = ptrEnd2;
while (image.ReadUInt64(image.MapVATR((ulong)ptrStart2)) != 0xFFFF_FFFF_FFFF_FFFF)
{
ptrStart2 -= entrySize;
}
ptrStart2 += entrySize;
// Acquire both function tables
var funcs1 = image.ReadMappedWordArray((ulong)ptrStart1, (int)(ptrEnd1 - ptrStart1) / entrySize);
var funcs2 = image.ReadMappedWordArray((ulong)ptrStart2, (int)(ptrEnd2 - ptrStart2) / entrySize);
// Check every function
var funcs = funcs1.Concat(funcs2);
foreach (var pFunc in funcs)
{
var result = ConsiderCode(image, image.MapVATR((ulong)pFunc));
if (result != (0, 0))
{
return(result);
}
}
return(0, 0);
}
private Dictionary <uint, ulong> sweepForAddressLoads(List <uint> func, ulong baseAddress, IFileFormatReader image)
{
// List of registers and addresses loaded into them
var regs = new Dictionary <uint, ulong>();
// Iterate each instruction
var pc = baseAddress;
foreach (var inst in func)
{
// Is it an ADRP Xn, #page?
if (getAdrp(inst, pc) is (uint reg, ulong page))
{
// If we've had an earlier ADRP for the same register, we'll discard the previous load
if (regs.ContainsKey(reg))
{
regs[reg] = page;
}
else
{
regs.Add(reg, page);
}
}
if (getAdr(inst, pc) is (uint reg_adr, ulong addr))
{
if (regs.ContainsKey(reg_adr))
{
regs[reg_adr] = addr;
}
else
{
regs.Add(reg_adr, addr);
}
}
// Is it an ADD Xm, Xn, #offset?
if (getAdd64(inst) is (uint reg_n, uint reg_d, uint imm))
{
// We are only interested in registers that have already had an ADRP, and the ADD must be to itself
if (reg_n == reg_d && regs.ContainsKey(reg_d))
{
regs[reg_d] += imm;
}
}
// Is it an LDR Xm, [Xn, #offset]?
if (getLdr64ImmOffset(inst) is (uint reg_t, uint reg_ldr_n, uint simm))
{
// We are only interested in registers that have already had an ADRP, and the LDR must be to itself
if (reg_t == reg_ldr_n && regs.ContainsKey(reg_ldr_n))
{
regs[reg_ldr_n] += simm * 8; // simm is a byte offset in a multiple of 8
// Now we have a pointer address, dereference it
regs[reg_ldr_n] = image.ReadUInt64(image.MapVATR(regs[reg_ldr_n]));
}
}
// Advance program counter which we need to calculate ADRP pages correctly
pc += 4;
}
return(regs);
}