void OnBeforeStopParcelEditing()
{
if (m_ParcelEditHelperExt.RecordToField)
{
return;
}
IParcelConstruction4 pTrav = (IParcelConstruction4)m_pParcEditorMan.ParcelConstruction;
IEnumGSLines pGSLines = pTrav.GetLines(false, false);
pGSLines.Reset();
IGSLine pGSLine = null;
IGSParcel pGSParcel = null;
pGSLines.Next(ref pGSParcel, ref pGSLine);
while (pGSLine != null)
{
IGSAttributes pLineAtts = (IGSAttributes)pGSLine;
double brgRecord = Convert.ToDouble(pGSLine.Bearing);
brgRecord = brgRecord * 180 / Math.PI;
pLineAtts.SetProperty(m_ParcelEditHelperExt.FieldName, brgRecord);
//pGSParcel.Modified();
pGSLines.Next(ref pGSParcel, ref pGSLine);
}
pTrav.UpdateGridFromGSLines(true, false);
}
protected override void OnClick()
{
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
ICadastralPacketManager pCadPacketMan = (ICadastralPacketManager)pCadEd;
//bool bStartedWithPacketOpen = pCadPacketMan.PacketOpen;
if (pParcEditorMan == null)
{
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
if (pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing and try again.");
return;
}
IParcelConstruction pConstr = pParcEditorMan.ParcelConstruction;
IParcelConstruction4 pConstr4 = pConstr as IParcelConstruction4;
ICadastralPoints pCadastralPts = pConstr4 as ICadastralPoints;
ICadastralEditorSettings2 pCadastralEditorSettings2 = pCadEd as ICadastralEditorSettings2;
ICadastralFixedPoints pFixedPoints = pCadastralPts as ICadastralFixedPoints;
IPointCalculation pPointCalc = new PointCalculationClass();
if (pConstr == null)
{
return;
}
IGSLine pParcelLine = null;
IMetricUnitConverter pMetricUnitConv = (IMetricUnitConverter)pCadEd;
IGSPoint pStartPoint = null;
List <int> lstPointIds = new List <int>();
List <IVector3D> Traverse = new List <IVector3D>();
//get rotation here
IParcelConstructionData pConstrData = pConstr4.ConstructionData;
IConstructionParentParcels pConstructionParentParcels = pConstrData as IConstructionParentParcels;
ICadastralUndoRedo pCadUndoRedo = pConstr as ICadastralUndoRedo;
try
{
int iParcelID = -1;
if (pConstructionParentParcels.ParentParcelCount > 0)
{
pConstructionParentParcels.GetParentParcel(0, ref iParcelID);
}
ICadastralParcel pCadaParcel = pCadPacketMan.JobPacket as ICadastralParcel;
IGSParcel pGSParcel = null;
if (pCadaParcel != null)
{
pGSParcel = pCadaParcel.GetParcel(iParcelID);
}
//if in measurement view then rotation is 0
double TheRotation = 0;
if (pGSParcel == null)
{
pGSParcel = pConstr.Parcel;
}
if (!pCadastralEditorSettings2.MeasurementView)
{
TheRotation = pGSParcel.Rotation;//radians
}
if (TheRotation == 123456789)
{
TheRotation = 0;
}
pPointCalc.Rotation = TheRotation;
IGSPoint pClosingPoint = null;
#region simple method as fall-back
bool bUseSimpleStackSelection = false;
if (bUseSimpleStackSelection)
{
//bool bLineSelectionSequence = false;
//IGSLine pLastSelectedGSLineInGrid = null;
//for (int i = 0; i < pConstr.LineCount; i++)
//{
// if (pConstr.GetLineSelection(i))
// {
// if (pConstr.GetLine(i, ref pParcelLine))
// {
// if (!bLineSelectionSequence) //first line
// {
// pStartPoint = pCadastralPts.GetPoint(pParcelLine.FromPoint);
// pToPoint = pCadastralPts.GetPoint(pParcelLine.ToPoint);
// }
// pPointCalc.AddLine(pParcelLine);
// pLastSelectedGSLineInGrid = pParcelLine;
// pToPoint = pCadastralPts.GetPoint(pParcelLine.ToPoint);
// lstPointIds.Add(pToPoint.Id);
// }
// bLineSelectionSequence = true;
// double dBear = pParcelLine.Bearing; //Azimuth of IVector3D is north azimuth radians zero degrees north
// double dDist = pParcelLine.Distance;
// IVector3D vec = new Vector3DClass();
// vec.PolarSet(dBear, 0, dDist); ////Azimuth of IVector3D is north azimuth radians zero degrees north
// Traverse.Add(vec);
// }
// else
// {
// if (bLineSelectionSequence && pConstr.GetLine(i, ref pParcelLine) && HasLineSelectionAfter(pConstr, i))
// //if there was a prior selection and this line is a complete line, and there is no later selection
// {
// MessageBox.Show("Please select a continuous set of lines for closure.");
// return;
// }
// }
//}
//pClosingPoint = pCadastralPts.GetPoint(pLastSelectedGSLineInGrid.ToPoint);
}
else
#endregion
{//build a forward star for the selected lines
IEnumCELines pCELines = new EnumCELinesClass();
IEnumGSLines pEnumGSLines = (IEnumGSLines)pCELines;
ILongArray pLongArray = new LongArrayClass();
int iFirstToNode = -1;
for (int i = 0; i < pConstr.LineCount; i++)
{
if (pConstr.GetLineSelection(i))
{
if (pConstr.GetLine(i, ref pParcelLine))
{
if (iFirstToNode < 0)
{
iFirstToNode = pParcelLine.ToPoint;
}
pLongArray.Add(i);
pCELines.Add(pParcelLine);
}
}
}
if (pCELines.Count == 0)
{
MessageBox.Show("No lines selected. Please select a continuous set of lines for closure." + Environment.NewLine +
"Line selection should not have branches.", "Traverse");
return;
}
IParcelLineFunctions3 ParcelLineFx = new ParcelFunctionsClass();
IGSForwardStar pFwdStar = ParcelLineFx.CreateForwardStar(pEnumGSLines);
//forward star object is now created for all the selected lines,
//need to first re-sequence the lines, and test for branching and discontinuity
int iBranches = 0; int iTracedLines = 0;
int iLoops = 0; int iTerminals = 0;
List <int> LineIDList = new List <int>();
List <int> FromList = new List <int>();
List <int> ToList = new List <int>();
List <string> FromToLine = new List <string>();
bool bTraceSucceeded = TraceLines(ref pFwdStar, iFirstToNode, ref iBranches, ref iTracedLines,
ref iLoops, ref iTerminals, ref FromToLine, ref FromList, ref ToList, 0);
if (iBranches > 0)
{
MessageBox.Show("Please select a continuous set of lines for closure." + Environment.NewLine +
"Line selection should not have branches.", "Traverse");
return;
}
if (iTracedLines < pLongArray.Count)
{
MessageBox.Show("Please select a continuous set of lines for closure." + Environment.NewLine +
"Selected Lines should be connected in a single sequence without branches.", "Traverse");
return;
}
//if it's a single loop check to see if the sequence needs to be reversed
//CW or CCW based on bearings
if (iLoops == 1)
{
bool bIsReversed = false;
foreach (int i in FromList)
{
if (i < 0)
{
bIsReversed = true;
}
else
{
bIsReversed = false;
break;
}
}
if (bIsReversed)
{//all courses are running reversed, so reverse the whole sequence
FromToLine.Clear();
FromList.Reverse();
ToList.Reverse();
int iNewFrom = -ToList[ToList.Count - 1];
int iNewTo = -FromList[ToList.Count - 1];
string sNewFromTo = iNewFrom.ToString() + "," + iNewTo.ToString();
FromToLine.Add(sNewFromTo);
for (int i = 1; i < ToList.Count; i++)
{
iNewFrom = -ToList[i - 1];
iNewTo = -FromList[i - 1];
sNewFromTo = iNewFrom.ToString() + "," + iNewTo.ToString();
FromToLine.Add(sNewFromTo);
}
}
}
LineIDList.Clear();
FromList.Clear();
ToList.Clear();
pLongArray.RemoveAll();
pCadUndoRedo.StartUndoRedoSession("Adjust Traverse");
if (iLoops == 0)
{
//re-sequence using TraceLines function based on either end point, because the order of
//selected construction lines in grid don't control start or end point
FromToLine.Clear();
int iTerminus = -1;
iTracedLines = 0;
iBranches = 0;
iLoops = 0; iTerminals = 0;
FindTerminusForSequence(ref pFwdStar, iFirstToNode, ref iTerminus, 0);
if (iTerminus == -1)
{
pCadUndoRedo.WriteUndoRedoSession(false);
return;
}
TraceLines(ref pFwdStar, iTerminus, ref iBranches, ref iTracedLines, ref iLoops, ref iTerminals,
ref FromToLine, ref FromList, ref ToList, 0);
}
List <IVector3D> SequencedTraverse = new List <IVector3D>();
IGSLine pGSLineInPath = null;
foreach (string s in FromToLine)
{
string[] sFromTo = s.Split(',');
int iFrom = Convert.ToInt32(sFromTo[0]);
int iTo = Convert.ToInt32(sFromTo[1]);
bool bReversed = pFwdStar.GetLine(iFrom, iTo, ref pGSLineInPath);
if (bReversed)
{
IGSLine pGSLine180 = new GSLineClass();
pGSLine180.FromPoint = pGSLineInPath.ToPoint;
pGSLine180.ToPoint = pGSLineInPath.FromPoint;
pGSLine180.Bearing = pGSLineInPath.Bearing + Math.PI;
pGSLine180.Distance = pGSLineInPath.Distance;
IVector3D vec180 = new Vector3DClass();
vec180.PolarSet(pGSLine180.Bearing, 0, pGSLine180.Distance); //Azimuth of IVector3D is north azimuth radians zero degrees north
Traverse.Add(vec180);
lstPointIds.Add(pGSLine180.ToPoint);
pPointCalc.AddLine(pGSLine180);
}
else
{
double dBear = pGSLineInPath.Bearing;
double dDist = pGSLineInPath.Distance;
IVector3D vec = new Vector3DClass();
vec.PolarSet(dBear, 0, dDist); //Azimuth of IVector3D is north azimuth radians zero degrees north
Traverse.Add(vec);
lstPointIds.Add(pGSLineInPath.ToPoint);
pPointCalc.AddLine(pGSLineInPath);
}
if (pStartPoint == null)
{
if (bReversed)
{
pStartPoint = pCadastralPts.GetPoint(pGSLineInPath.ToPoint);
}
else
{
pStartPoint = pCadastralPts.GetPoint(pGSLineInPath.FromPoint);
}
}
if (bReversed)
{
pClosingPoint = pCadastralPts.GetPoint(pGSLineInPath.FromPoint);
}
else
{
pClosingPoint = pCadastralPts.GetPoint(pGSLineInPath.ToPoint);
}
}
}
if (pStartPoint == null)
{
pCadUndoRedo.WriteUndoRedoSession(false);
return;
}
IPoint pStart = new PointClass();
pStart.X = pStartPoint.X;
pStart.Y = pStartPoint.Y;
string sAdjustMethod = "Compass";
esriParcelAdjustmentType eAdjMethod = esriParcelAdjustmentType.esriParcelAdjustmentCompass;
if (pCadastralEditorSettings2.ParcelAdjustment == esriParcelAdjustmentType.esriParcelAdjustmentNone ||
pCadastralEditorSettings2.ParcelAdjustment == esriParcelAdjustmentType.esriParcelAdjustmentCompass)
{
eAdjMethod = esriParcelAdjustmentType.esriParcelAdjustmentCompass;
}
else if (pCadastralEditorSettings2.ParcelAdjustment == esriParcelAdjustmentType.esriParcelAdjustmentCrandall)
{
sAdjustMethod = "Crandall";
eAdjMethod = pCadastralEditorSettings2.ParcelAdjustment;
}
else if (pCadastralEditorSettings2.ParcelAdjustment == esriParcelAdjustmentType.esriParcelAdjustmentTransit)
{
sAdjustMethod = "Transit";
eAdjMethod = pCadastralEditorSettings2.ParcelAdjustment;
}
pPointCalc.CalculatePoints(eAdjMethod, pStartPoint.Id, pStartPoint, pClosingPoint.Id, pClosingPoint, true);
ITraverseClosure pClose = pPointCalc.Closure;
List <string> lstCoursesFromTo = new List <string>();
List <IVector3D> AdjustedTraverse = new List <IVector3D>();
double dAdjustedPointX = 0; double dAdjustedPointY = 0;
double dPreviousPointX = 0; double dPreviousPointY = 0;
for (int i = 0; i < pClose.CourseCount; i++)
{
IGSPoint pPt = pCadastralPts.GetPoint(lstPointIds[i]);
dAdjustedPointY = pPointCalc.GetCalculatedPoint(lstPointIds[i], ref dAdjustedPointX);
string sFromTo = "";
IVector3D pAdjustedLine = new Vector3DClass();
if (i == 0)
{
sFromTo = pStartPoint.Id.ToString() + "-" + lstPointIds[i].ToString();
pAdjustedLine.SetComponents(dAdjustedPointX - pStartPoint.X, dAdjustedPointY - pStartPoint.Y, 0);
}
else
{
sFromTo = lstPointIds[i - 1].ToString() + "-" + lstPointIds[i].ToString();
pAdjustedLine.SetComponents(dAdjustedPointX - dPreviousPointX, dAdjustedPointY - dPreviousPointY, 0);
}
lstCoursesFromTo.Add(sFromTo);
IVector3D Z_Axis = new Vector3DClass();
Z_Axis.SetComponents(0, 0, 100);
pAdjustedLine.Rotate(TheRotation, Z_Axis);
AdjustedTraverse.Add(pAdjustedLine);
dPreviousPointX = dAdjustedPointX;
dPreviousPointY = dAdjustedPointY;
pPt.X = dAdjustedPointX;
pPt.Y = dAdjustedPointY;
if (!pCadastralEditorSettings2.MeasurementView)
{
pFixedPoints.SetFixedPoint(lstPointIds[i], true);
}
}
double dMisclosureDistance = pClose.MisclosureDistance; double dMisclosureBearing = pClose.MisclosureDirection;
IVector MiscloseVector = new Vector3DClass();
IEditProperties2 pEdProps = pEd as IEditProperties2;
IAngularConverter pAngConv = new AngularConverterClass();
pAngConv.SetAngle(dMisclosureBearing, esriDirectionType.esriDTNorthAzimuth, esriDirectionUnits.esriDURadians);
//int iPrec = 7;
//if (pConstr.Parcel.Plan.AngleUnits == esriDirectionUnits.esriDUDegreesMinutesSeconds)
// iPrec = 0;
string sMiscloseBearing = pAngConv.GetString(pEdProps.DirectionType, pEdProps.DirectionUnits, pEdProps.AngularUnitPrecision);
Utilities UTIL = new Utilities();
string sRatio = "High Accuracy";
if (pClose.RelativeErrorRatio < 10000)
{
sRatio = "1:" + pClose.RelativeErrorRatio.ToString("0");
}
if (dMisclosureDistance >= 0.001)
{
sMiscloseBearing = UTIL.FormatDirectionDashesToDegMinSecSymbols(sMiscloseBearing);
}
else
{
sMiscloseBearing = "----";
}
ICadastralUnitConversion pCadUnitConverter = new CadastralUnitConversionClass();
double dMetersPerUnit = pCadUnitConverter.ConvertDouble(1, pConstr.Parcel.Plan.DistanceUnits, esriCadastralDistanceUnits.esriCDUMeter);
string sReport = "Closure:" + Environment.NewLine +
" error: " + sRatio + Environment.NewLine +
" distance: " + (dMisclosureDistance / dMetersPerUnit).ToString("0.000") + Environment.NewLine +
" bearing: " + sMiscloseBearing + Environment.NewLine +
" xdist: " + (pClose.MisclosureX / dMetersPerUnit).ToString("0.000") + Environment.NewLine +
" ydist: " + (pClose.MisclosureY / dMetersPerUnit).ToString("0.000") + Environment.NewLine +
" courses: " + (pClose.CourseCount) + Environment.NewLine +
Environment.NewLine + "Adjustment:" + Environment.NewLine +
" method: " + sAdjustMethod;
dlgTraverseResults dlgTraverseResults = new dlgTraverseResults();
AddTraverseInfoToGrid(pConstr.Parcel.Plan, dlgTraverseResults.dataGridView1, Traverse, AdjustedTraverse, lstCoursesFromTo);
dlgTraverseResults.txtMiscloseReport.Text = sReport;
DialogResult dRes = dlgTraverseResults.ShowDialog();
if (dRes == DialogResult.Cancel)
{
//since we cancelled, set the points back
foreach (int i in lstPointIds)
{
pFixedPoints.SetFixedPoint(i, false);
}
pCadUndoRedo.WriteUndoRedoSession(false);
}
else
{
pCadUndoRedo.WriteUndoRedoSession(true);
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + Environment.NewLine + "Line number:" + ex.LineNumber().ToString()
+ " in " + ex.TargetSite.Name, "Traverse");
pCadUndoRedo.WriteUndoRedoSession(false);
}
}
protected override void OnClick()
{
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
ICadastralExtensionManager pCadMan = pCadEd as ICadastralExtensionManager;
ICadastralPacketManager pCadPacketMan = (ICadastralPacketManager)pCadEd;
//bool bStartedWithPacketOpen = pCadPacketMan.PacketOpen;
if (!(pCadMan.ContextItem is IGSLine))
{
return;
}
IGSLine pGSLine = pCadMan.ContextItem as IGSLine;
if (pParcEditorMan == null)
{
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
if (pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing and try again.");
return;
}
IParcelConstruction pConstr = pParcEditorMan.ParcelConstruction;
ICadastralLinePoints2Ex pCadLPsEx = pConstr as ICadastralLinePoints2Ex;
ILongArray pLngArrBefore = pCadLPsEx.LinePoints;
List <int> lstLPBefore = new List <int>();
for (int i = 0; i < pLngArrBefore.Count; i++)
{
lstLPBefore.Add(pLngArrBefore.get_Element(i));
}
//first get the current set of breakpoints
Utilities FabUTILS = new Utilities();
FabUTILS.ExecuteCommand("{9987F18B-8CC4-4548-8C41-7DB51F289BB3}"); //Run COTS Breakline command
ILongArray pLngArrAfter = pCadLPsEx.LinePoints;
List <int> lstLPAfter = new List <int>();
for (int i = 0; i < pLngArrAfter.Count; i++)
{
lstLPAfter.Add(pLngArrAfter.get_Element(i));
}
List <int> lstNewBreakPoints = lstLPAfter.Except(lstLPBefore).ToList();
if (lstNewBreakPoints.Count == 0)
{
return;
}
IParcelConstruction4 pConstr4 = pConstr as IParcelConstruction4;
ICadastralPoints pCadastralPts = pConstr4 as ICadastralPoints;
IEnumCELines pCELines = new EnumCELinesClass();
IEnumGSLines pEnumGSLines = (IEnumGSLines)pCELines;
pCELines.Add(pGSLine);
//check if it's a construction line or parent line
bool bIsParentLine = true;
IEnumGSLines pEnumGSConstructionLines = pConstr4.GetLines(false, false);
IGSLine pGSTestLine = null;
IGSParcel pGSParc = null;
pEnumGSConstructionLines.Reset();
pEnumGSConstructionLines.Next(ref pGSParc, ref pGSTestLine);
while (pGSTestLine != null)
{
if ((pGSLine.FromPoint == pGSTestLine.FromPoint) && (pGSLine.ToPoint == pGSTestLine.ToPoint))
{
bIsParentLine = false;
break;
}
pEnumGSConstructionLines.Next(ref pGSParc, ref pGSTestLine);
}
IParcelLineFunctions3 pParcLineFunctions = new ParcelFunctionsClass();
IEnumGSLines pNewLinesEnum = pParcLineFunctions.BreakLinesAtLinePoints(pEnumGSLines, pCadastralPts, true, false);
IGSParcel pGSParcel = null;
IGSLine pGSNewLine = null;
ICadastralUndoRedo pCadUndoRedo = pConstr as ICadastralUndoRedo;
pCadUndoRedo.StartUndoRedoSession("Break-line");
pNewLinesEnum.Reset();
pNewLinesEnum.Next(ref pGSParcel, ref pGSNewLine);
while (pGSNewLine != null)
{
pConstr4.InsertGridRow(-1, pGSNewLine, true);
pNewLinesEnum.Next(ref pGSParcel, ref pGSNewLine);
}
ICadastralUnbuildableLines pUnbuildable = pConstr4 as ICadastralUnbuildableLines;
if (bIsParentLine)
{
pUnbuildable.AddLine(pGSLine);
}
else
{
pConstr4.Planarize(0.001); //delete the original construction line
}
pCadUndoRedo.WriteUndoRedoSession(true);
}
protected override void OnClick()
{
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
ICadastralFabric pCadFabric = pCadEd.CadastralFabric;
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)pCadEd;
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
IParcelConstruction pTrav = pParcEditorMan.ParcelConstruction;
//Test for the visibility of the parcel details window
IDockableWindowManager pDocWinMgr = (IDockableWindowManager)ArcMap.Application;
UID pUID = new UIDClass();
pUID.Value = "{28531B78-7C42-4785-805D-2A7EC8879EA1}";//ArcID.ParcelDetails
IDockableWindow pParcelDet = pDocWinMgr.GetDockableWindow(pUID);
if (!pParcelDet.IsVisible())
{
MessageBox.Show("The Parcel Details window is not visible. \r\nThere is no data to save.");
return;
}
//Make sure the lines grid is selected
Utilities UTILS = new Utilities();
UTILS.SelectCadastralPropertyPage((ICadastralExtensionManager)pCadExtMan, "lines");
//test to make sure there is data there to be saved
IParcelConstruction3 pConstr = (IParcelConstruction3)pTrav;
IGSParcel pParcel = null;
//
try
{
pParcel = pTrav.Parcel;
}
catch (COMException err)
{
MessageBox.Show(err.Message + Environment.NewLine + "ERROR: Select a parcel or add lines to the grid. \r\nThere is no data to save. ");
return;
}
//define the file that needs to be saved
// Display .Net dialog for File saving.
SaveFileDialog saveFileDialog = new SaveFileDialog();
// Set File Filter
saveFileDialog.Filter = "Comma-delimited(*.csv)|*.csv|All Files|*.*";
saveFileDialog.FilterIndex = 1;
saveFileDialog.RestoreDirectory = true;
// Warn on overwrite
saveFileDialog.OverwritePrompt = true;
// Don't need to Show Help
saveFileDialog.ShowHelp = false;
// Set Dialog Title
saveFileDialog.Title = "Save file";
// Display Open File Dialog
if (saveFileDialog.ShowDialog() != DialogResult.OK)
{
saveFileDialog = null;
return;
}
TextWriter tw = null;
try
{
tw = new StreamWriter(saveFileDialog.FileName);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
return;
}
try
{
IGSPlan pPlan = pTrav.Parcel.Plan;
int iDF = (int)pPlan.DirectionFormat;
switch (iDF)
{
case (int)esriDirectionType.esriDTNorthAzimuth:
tw.WriteLine("DT,NA");
break;
case (int)esriDirectionType.esriDTPolar:
tw.WriteLine("DT,P");
break;
case (int)esriDirectionType.esriDTQuadrantBearing:
tw.WriteLine("DT,QB");
break;
case (int)esriDirectionType.esriDTSouthAzimuth:
tw.WriteLine("DT,SA");
break;
default:
tw.WriteLine("DT,NA");
break;
}
int iAU = (int)pPlan.AngleUnits;
switch (iAU)
{
case (int)esriDirectionUnits.esriDUDecimalDegrees:
tw.WriteLine("DU,DD");
break;
case (int)esriDirectionUnits.esriDUDegreesMinutesSeconds:
tw.WriteLine("DU,DMS");
break;
case (int)esriDirectionUnits.esriDUGons:
case (int)esriDirectionUnits.esriDUGradians:
tw.WriteLine("DU,G");
break;
case (int)esriDirectionUnits.esriDURadians:
tw.WriteLine("DU,R");
break;
default:
tw.WriteLine("DU,R");
break;
}
ICadastralUnitConversion pUnitConv = new CadastralUnitConversionClass();
double dMetricConversion = pUnitConv.ConvertDouble(1, pPlan.DistanceUnits, esriCadastralDistanceUnits.esriCDUMeter);
string sLU = Convert.ToString(dMetricConversion);
tw.WriteLine("ToMetricFactor," + sLU);
IEnumGSLines pGSLines = pTrav.GetLines();
pGSLines.Reset();
IGSLine pGSLine = null;
IGSParcel pGSParcel = null;
pGSLines.Next(ref pGSParcel, ref pGSLine);
while (pGSLine != null)
{
int iFromPt = pGSLine.FromPoint; //from point
int iToPt = pGSLine.ToPoint; //to point
int iLineCat = (int)pGSLine.Category; //line category
if (iLineCat == 4)
{
pGSLines.Next(ref pGSParcel, ref pGSLine);
continue; //ignore radial lines
}
int iLineUserType = pGSLine.LineType; //line user type
int iAccCat = pGSLine.Accuracy; //accuracy
double dDistance = pGSLine.Distance; //distance
double dChord = pGSLine.Distance; //chord
double dRadius = pGSLine.Radius; //radius
string sLineCat = Convert.ToString(iLineCat);
string sLineUserType = Convert.ToString(iLineUserType);
if (iLineUserType > 2140000000)
{
sLineUserType = "";
}
string sAccCat = Convert.ToString(iAccCat);
string sFromPt = Convert.ToString(iFromPt);//from point
//following need conversion
string sDirection = NorthAzRadians_2_DirectionString(pGSLine.Bearing, pPlan.DirectionFormat, pPlan.AngleUnits); //direction
string sDistance = Convert.ToString(dDistance / dMetricConversion); //distance
string sRadius = "";
string sChord = "";
if (dRadius != 123456789)
{ //circular curve
sRadius = Convert.ToString(dRadius / dMetricConversion); //radius
sChord = Convert.ToString(dDistance / dMetricConversion); //chord
sDistance = ""; //distance is replaced with the chord distance
}
string sToPt = Convert.ToString(iToPt);//to point
//write the line
tw.WriteLine(sFromPt + "," + sDirection + "," + sDistance + "," + sRadius + "," + sChord + "," + sToPt + ","
+ sLineCat + "," + sLineUserType + "," + sAccCat);
pGSLines.Next(ref pGSParcel, ref pGSLine);
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
finally
{
tw.Close();
saveFileDialog = null;
}
}
private void CalculateStatedArea(IQueryFilter m_pQF, ITable pParcelsTable, ICadastralEditor pCadEd, ISpatialReference pMapSR,
double SquareMetersPerUnitFactor, string Suffix, int DecimalPlaces, ref Dictionary <int, string> dict_ParcelSelection2CalculatedArea, ITrackCancel pTrackCancel)
{
bool bTrackCancel = (pTrackCancel != null);
//ILine pLine = new LineClass();
ICursor pCursor = pParcelsTable.Search(m_pQF, false);
IRow pParcelRecord = pCursor.NextRow();
Utilities Utils = new Utilities();
IArray pParcelFeatArr = new ArrayClass();
IGeoDataset pGeoDS = (IGeoDataset)((IFeatureClass)pParcelsTable).FeatureDataset;
ISpatialReference pFabricSR = pGeoDS.SpatialReference;
IProjectedCoordinateSystem pPCS = null;
double dMetersPerUnit = 1;
bool bFabricIsInGCS = !(pFabricSR is IProjectedCoordinateSystem);
if (!bFabricIsInGCS)
{
pPCS = (IProjectedCoordinateSystem)pFabricSR;
dMetersPerUnit = pPCS.CoordinateUnit.MetersPerUnit;
}
else
{
pPCS = (IProjectedCoordinateSystem)pMapSR;
dMetersPerUnit = pPCS.CoordinateUnit.MetersPerUnit;
}
//for each parcel record
while (pParcelRecord != null)
{
IFeature pFeat = (IFeature)pParcelRecord;
//IGeometry pGeom = pFeat.Shape;
pParcelFeatArr.Add(pFeat);
Marshal.ReleaseComObject(pParcelRecord);
if (bTrackCancel)
{
if (!pTrackCancel.Continue())
{
break;
}
}
pParcelRecord = pCursor.NextRow();
}
Marshal.ReleaseComObject(pCursor);
ICadastralFeatureGenerator pFeatureGenerator = new CadastralFeatureGeneratorClass();
IEnumGSParcels pEnumGSParcels = pFeatureGenerator.CreateParcelsFromFeatures(pCadEd, pParcelFeatArr, true);
pEnumGSParcels.Reset();
Dictionary <int, int> dict_ParcelAndStartPt = new Dictionary <int, int>();
Dictionary <int, IPoint> dict_PointID2Point = new Dictionary <int, IPoint>();
//dict_PointID2Point -->> this lookup makes an assumption that the fabric TO point geometry is at the same location as the line *geometry* endpoint
IParcelLineFunctions3 ParcelLineFx = new ParcelFunctionsClass();
IGSParcel pGSParcel = pEnumGSParcels.Next();
int iFromPtIDX = -1;
int iToPtIDX = -1;
int iParcelIDX = -1;
int iIsMajorFldIdx = -1;
while (pGSParcel != null)
{
IEnumCELines pCELines = new EnumCELinesClass();
IEnumGSLines pEnumGSLines = (IEnumGSLines)pCELines;
IEnumGSLines pGSLinesInner = pGSParcel.GetParcelLines(null, false);
pGSLinesInner.Reset();
IGSParcel pTemp = null;
IGSLine pGSLine = null;
ICadastralFeature pCF = (ICadastralFeature)pGSParcel;
int iParcID = pCF.Row.OID;
pGSLinesInner.Next(ref pTemp, ref pGSLine);
bool bStartPointAdded = false;
int iFromPtID = -1;
while (pGSLine != null)
{
if (pGSLine.Category == esriCadastralLineCategory.esriCadastralLineBoundary ||
pGSLine.Category == esriCadastralLineCategory.esriCadastralLineRoad ||
pGSLine.Category == esriCadastralLineCategory.esriCadastralLinePartConnection)
{
pCELines.Add(pGSLine);
ICadastralFeature pCadastralLineFeature = (ICadastralFeature)pGSLine;
IFeature pLineFeat = (IFeature)pCadastralLineFeature.Row;
if (iFromPtIDX == -1)
{
iFromPtIDX = pLineFeat.Fields.FindField("FROMPOINTID");
}
if (iToPtIDX == -1)
{
iToPtIDX = pLineFeat.Fields.FindField("TOPOINTID");
}
if (iParcelIDX == -1)
{
iParcelIDX = pLineFeat.Fields.FindField("PARCELID");
}
if (iIsMajorFldIdx == -1)
{
iIsMajorFldIdx = pLineFeat.Fields.FindField("ISMAJOR");
}
if (!bStartPointAdded)
{
iFromPtID = (int)pLineFeat.get_Value(iFromPtIDX);
bStartPointAdded = true;
}
IPolyline pPolyline = (IPolyline)pLineFeat.ShapeCopy;
//if (bFabricIsInGCS)
pPolyline.Project(pPCS);
//dict_PointID2Point -->> this lookup makes an assumption that the fabric TO point geometry is at the same location as the line *geometry* endpoint
int iToPtID = (int)pLineFeat.get_Value(iToPtIDX);
//first make sure the point is not already added
if (!dict_PointID2Point.ContainsKey(iToPtID))
{
dict_PointID2Point.Add(iToPtID, pPolyline.ToPoint);
}
}
pGSLinesInner.Next(ref pTemp, ref pGSLine);
}
if (pGSParcel.Unclosed)
{//skip unclosed parcels
pGSParcel = pEnumGSParcels.Next();
continue;
}
ICadastralFeature pCadastralPolygonFeature = (ICadastralFeature)pGSParcel;
IFeature pPolygonFeat = (IFeature)pCadastralPolygonFeature.Row;
IPolygon pParcelPolygon = (IPolygon)pPolygonFeat.ShapeCopy;
IGSForwardStar pFwdStar = ParcelLineFx.CreateForwardStar(pEnumGSLines);
//forward star is created for this parcel, now ready to find misclose for the parcel
List <int> LineIdsList = new List <int>();
List <IVector3D> TraverseCourses = new List <IVector3D>();
List <int> FabricPointIDList = new List <int>();
List <double> RadiusList = new List <double>();
List <bool> IsMajorList = new List <bool>();
List <bool> IsRunningCounterClockwise = new List <bool>();
bool bPass = false;
if (!bFabricIsInGCS)
{
bPass = Utils.GetParcelTraverseEx(ref pFwdStar, iIsMajorFldIdx, iFromPtID, dMetersPerUnit,
ref LineIdsList, ref TraverseCourses, ref FabricPointIDList, ref RadiusList, ref IsMajorList, ref IsRunningCounterClockwise,
pParcelPolygon, 0, -1, -1, false);
}
else
{
bPass = Utils.GetParcelTraverseEx(ref pFwdStar, iIsMajorFldIdx, iFromPtID, dMetersPerUnit * dMetersPerUnit,
ref LineIdsList, ref TraverseCourses, ref FabricPointIDList, ref RadiusList, ref IsMajorList, ref IsRunningCounterClockwise,
pParcelPolygon, 0, -1, -1, false);
}
//List<double> SysValList = new List<double>();
IVector3D MiscloseVector = null;
IPoint[] FabricPoints = new IPoint[FabricPointIDList.Count];//from control
int f = 0;
foreach (int j in FabricPointIDList)
{
FabricPoints[f++] = dict_PointID2Point[j];
}
double dRatio = 10000;
double dArea = 0;
double dGroundToGridFactor = pGSParcel.Scale;
bool bHasCircularArcs = false;
f = FabricPointIDList.Count - 1;
IPoint[] AdjustedTraversePoints = Utils.BowditchAdjustEx(TraverseCourses, FabricPoints[f], FabricPoints[f],
RadiusList, IsMajorList, IsRunningCounterClockwise, out MiscloseVector, out dRatio, out dArea,
out bHasCircularArcs);
if (MiscloseVector == null)
{//skip if vector closure failed
pGSParcel = pEnumGSParcels.Next();
continue;
}
//now compare the Geometry polygon area with the computed area to see if we need to use parametric computed area
// there needs to be at least one circular arc to warrant using this approach.
IArea pGeomArea = pPolygonFeat.ShapeCopy as IArea;
double dGroundArea = pGeomArea.Area / (dGroundToGridFactor * dGroundToGridFactor);
double dAreaPercentageDiff = Math.Abs(dGroundArea - Math.Abs(dArea)) / dGroundArea;
if (dAreaPercentageDiff > 0.075 && bHasCircularArcs && dRatio > 250)
{
dArea = dGroundArea;
}
else if (bHasCircularArcs && dArea < 0 && dRatio > 7500) //if dArea is negative then lines are running counter-clockwise
{
dArea = Math.Abs(dArea);
}
else if (bHasCircularArcs && dArea < 0 && pParcelPolygon.ExteriorRingCount > 1)
{
dArea = pGeomArea.Area;
}
dArea *= (dMetersPerUnit * dMetersPerUnit); //convert to square meters first
dArea /= SquareMetersPerUnitFactor; //convert to the given unit equivalent
string sFormattedArea = Math.Round(dArea, DecimalPlaces).ToString() + Suffix;
dict_ParcelSelection2CalculatedArea.Add(pGSParcel.DatabaseId, sFormattedArea);
pGSParcel = pEnumGSParcels.Next();
//if (bShowProgressor)
//{
// if (pStepProgressor.Position < pStepProgressor.MaxRange)
// pStepProgressor.Step();
//}
}
}
