private void RefreshTOC()
{
IMxDocument mapDoc = ArcMap.Document as IMxDocument;
if (mapDoc != null)
{
IContentsView tocView = mapDoc.ContentsView[0] as IContentsView;
tocView.Refresh(null);
}
}
protected override void OnClick()
{
ILayer layer = null;
for (int i = 0; i < _map.LayerCount; i++)
{
layer = _map.get_Layer(i);
CycleLayer(layer);
}
_contentsView.Refresh(null);
}
// =========================================================================
// Event handlers
// =========================================================================
private void OnContentChanged()
{
foreach (var layer in AllLayers)
{
if (!Layers.Aggregate(false, (current, visLayer) => current || (visLayer == layer)))
{
layer.IsVisible = true;
layer.Visible = false;
}
}
CycloMediaLayer changedLayer = Layers.Aggregate <CycloMediaLayer, CycloMediaLayer>
(null, (current, layer) => (layer.IsVisible && (!layer.Visible)) ? layer : current);
CycloMediaLayer refreshLayer = null;
foreach (var layer in Layers)
{
bool visible = ((changedLayer == null) || (layer == changedLayer)) && layer.IsVisible;
refreshLayer = (layer.IsVisible != visible) ? layer : refreshLayer;
layer.IsVisible = visible;
layer.Visible = layer.IsVisible;
}
if (refreshLayer != null)
{
IMxDocument document = ArcUtils.MxDocument;
IActiveView activeView = ArcUtils.ActiveView;
if (document != null)
{
// ReSharper disable UseIndexedProperty
IContentsView contentView = document.get_ContentsView(0);
// ReSharper restore UseIndexedProperty
if (contentView != null)
{
contentView.Refresh(_groupLayer);
}
}
if (activeView != null)
{
activeView.Refresh();
}
}
}
protected override void OnClick()
{
bool bShowProgressor = false;
IStepProgressor pStepProgressor = null;
//Create a CancelTracker.
ITrackCancel pTrackCancel = null;
IProgressDialogFactory pProgressorDialogFact;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Control command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Control");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFControlLayers = new ArrayClass();
if (!(FabricUTILS.GetControlLayersFromFabric(pMap, pCadFabric, out CFControlLayers)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ITable pPointsTable = null;
ITable pControlTable = null;
try
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
IFeatureLayer pFL = (IFeatureLayer)CFControlLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
//loop through each control layer and
//Get the selection of control
int iCnt = 0;
int iTotalSelectionCount = 0;
for (; iCnt < CFControlLayers.Count; iCnt++)
{
pFL = (IFeatureLayer)CFControlLayers.get_Element(iCnt);
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
iTotalSelectionCount += pSelSet.Count;
}
if (iTotalSelectionCount == 0)
{
MessageBox.Show("Please select some fabric control points and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFControlLayers = null;
}
return;
}
bShowProgressor = (iTotalSelectionCount > 10);
if (bShowProgressor)
{
pProgressorDialogFact = new ProgressDialogFactoryClass();
pTrackCancel = new CancelTrackerClass();
pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)pStepProgressor;
pStepProgressor.MinRange = 1;
pStepProgressor.MaxRange = iTotalSelectionCount * 2; //(runs through selection twice)
pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
//loop through each control layer and
//delete from its selection
m_pQF = new QueryFilterClass();
iCnt = 0;
for (; iCnt < CFControlLayers.Count; iCnt++)
{
pFL = (IFeatureLayer)CFControlLayers.get_Element(iCnt);
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
if (bShowProgressor)
{
pProgressorDialog.ShowDialog();
pStepProgressor.Message = "Collecting Control point data...";
}
//Add the OIDs of all the selected control points into a new feature IDSet
string[] sOIDListPoints = { "(" };
int tokenLimit = 995;
//int tokenLimit = 5; //temp for testing
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetControl = new FIDSetClass();
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected control points
IFeatureCursor pControlFeatCurs = (IFeatureCursor)pCursor;
IFeature pControlFeat = pControlFeatCurs.NextFeature();
int iPointID = pControlFeatCurs.FindField("POINTID");
while (pControlFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (bShowProgressor)
{
bCont = pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetControl.Find(pControlFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetControl.Add(pControlFeat.OID);
object obj = pControlFeat.get_Value(iPointID);
if (iCounter <= tokenLimit)
{
//if the PointID is not null add it to a query string as well
if (obj != DBNull.Value)
{
sOIDListPoints[j] += Convert.ToString(obj) + ",";
}
iCounter++;
}
else
{//maximum tokens reached
//set up the next OIDList
sOIDListPoints[j] = sOIDListPoints[j].Trim();
iCounter = 0;
j++;
FabricUTILS.RedimPreserveString(ref sOIDListPoints, 1);
sOIDListPoints[j] = "(";
if (obj != DBNull.Value)
{
sOIDListPoints[j] += Convert.ToString(obj) + ",";
}
}
}
Marshal.ReleaseComObject(pControlFeat); //garbage collection
pControlFeat = pControlFeatCurs.NextFeature();
if (bShowProgressor)
{
if (pStepProgressor.Position < pStepProgressor.MaxRange)
{
pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//first delete all the control point records
if (bShowProgressor)
{
pStepProgressor.Message = "Deleting control points...";
}
bool bSuccess = true;
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pControlTable, m_pFIDSetControl, pStepProgressor, pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pControlTable,
m_pFIDSetControl, pStepProgressor, pTrackCancel);
}
if (!bSuccess)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//next need to use an in clause to update the points, ...
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
//...for each item in the sOIDListPoints array
foreach (string inClause in sOIDListPoints)
{
string sClause = inClause.Trim().TrimEnd(',');
if (sClause.EndsWith("("))
{
continue;
}
if (sClause.Length < 3)
{
continue;
}
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints);
m_pQF.WhereClause = (sPref + pPointsTable.OIDFieldName + sSuff).Trim() + " IN " + sClause + ")";
if (!FabricUTILS.ResetPointAssociations(pPointsTable, m_pQF, bIsUnVersioned))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
return;
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
}
}
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete Control Points");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFControlLayers);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pProgressorDialog != null)
{
pProgressorDialog.HideDialog();
}
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFControlLayers = null;
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
}
}
protected override void OnClick()
{
//first check that we are currently editing
if (ArcMap.Editor.EditState != esriEditState.esriStateEditing)
{
MessageBox.Show("Please start editing and try again.", "Sample Code");
return;
}
//get the cadastral editor
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
//get the fabric line layers that belong to the target fabric.
// **SAMPLE CODE NOTE**
//This next function allows for more than 1 fabric lines sublayer in the map document, and uses a line layer array
//However, this sample code assumes just one line fabric sub layer, and works with the first found
//The function is provided for other expanded uses if needed elsewhere.
IArray LineLayerArray;
if (!GetFabricSubLayers(ArcMap.Document.ActiveView.FocusMap, esriCadastralFabricTable.esriCFTLines,
true, pCadEd.CadastralFabric, out LineLayerArray))
{
return;
}
// get the line selection; this code sample uses first line layer for the target fabric (first element)
ISelectionSet2 LineSelection =
GetSelectionFromLayer(LineLayerArray.get_Element(0) as ICadastralFabricSubLayer);
// check to see if there is only one parcel line selected
// **SAMPLE CODE NOTE**
//This sample code ensures one line feature, although it can be easily adapted for use on
//multiple line selection.
if (LineSelection.Count != 1)
{
MessageBox.Show("Please select only one parcel line from the Target fabric.", "Sample Code");
return;
}
//Get a search cursor from the line selection to get the parcel id
//We need to get an edit lock on the parcel using the parcel id
//An edit lock will guarantee the edit will persist in a multi-user environment after a reconcile
ILongArray pParcelsToLock = new LongArrayClass();
IFIDSet pFIDSetForParcelRegen = new FIDSet();
ICursor pCur;
LineSelection.Search(null, false, out pCur);
//this cursor returns the selected lines
// **SAMPLE CODE NOTE**
//setup for potential use for multiple line selection, even though this sample uses a single line selection
//get the field indices for line attributes needed.
int idxParcelID = pCur.FindField("parcelid");
int idxToPointID = pCur.FindField("topointid");
int idxFromPointID = pCur.FindField("frompointid");
int idxCenterPtId = pCur.FindField("centerpointid");
int idxDistance = pCur.FindField("distance");
int idxRadius = pCur.FindField("radius");
int idxCategory = pCur.FindField("category");
//also need the fabric point table and fields
IFeatureClass pFabricPointsFC = (IFeatureClass)pCadEd.CadastralFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
int idxPointX = pFabricPointsFC.FindField("x");
int idxPointY = pFabricPointsFC.FindField("y");
int idxPointCtrPt = pFabricPointsFC.FindField("centerpoint");
var ListFromToPairsForRadialLines = new List <int[]>();
// **SAMPLE CODE NOTE**
//setup for potential use for multiple line selection, even though this sample uses a single line selection
//the list declared above is here for potential use in Add-ins that make use of multiple circular arc lines
int[] ParcelIdCtrPtIdFromId1FromId2;
IRow pRow = pCur.NextRow();
while (pRow != null)
{
int iParcelID = (int)pRow.get_Value(idxParcelID);
pParcelsToLock.Add(iParcelID); //LongArray for the parcel locks
pFIDSetForParcelRegen.Add(iParcelID); //FIDSet for the parcel regenerate
//now check for a center point id on the line; this is for the case of changing the radius of an existing curve
object value = pRow.get_Value(idxCenterPtId);
if (value != DBNull.Value)
{ //collecting information to remove radial lines
ParcelIdCtrPtIdFromId1FromId2 = new int[4]; // 4-element array
ParcelIdCtrPtIdFromId1FromId2[0] = iParcelID;
ParcelIdCtrPtIdFromId1FromId2[1] = (int)value; //center point is always the to point of the radial line
ParcelIdCtrPtIdFromId1FromId2[2] = (int)pRow.get_Value(idxFromPointID);
ParcelIdCtrPtIdFromId1FromId2[3] = (int)pRow.get_Value(idxToPointID);
// **SAMPLE CODE NOTE**
//now add the array, to the list to accomodate other add-ins that may use
//more than one selected circular arc line
ListFromToPairsForRadialLines.Add(ParcelIdCtrPtIdFromId1FromId2);
}
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
}
Marshal.ReleaseComObject(pCur);
bool IsFileBasedGDB = (ArcMap.Editor.EditWorkspace.WorkspaceFactory.WorkspaceType !=
esriWorkspaceType.esriRemoteDatabaseWorkspace);
if (!IsFileBasedGDB)
{
//for file geodatabase creating a job is optional
//see if parcel locks can be obtained on the selected parcels. First create a job.
string NewJobName = "";
if (!CreateJob(pCadEd.CadastralFabric, "Sample Code change line to curve", out NewJobName))
{
return;
}
if (!TestForEditLocks(pCadEd.CadastralFabric, NewJobName, pParcelsToLock))
{
return;
}
}
//if we get this far, an edit lock has been acquired, or this is file geodatabase (no lock required)
//prompt the user for a new radius value
string sRadius = Interaction.InputBox("Enter a new Radius:", "Radius");
//**SAMPLE CODE NOTE** :
// using the Interaction class from the Microsfot Visual Basic library
// is a quick and easy way to provide an input dialog in a single line of code for sample purposes,
// without neeing to add a windows form, dockable window, or other UI elements into this project.
double dRadius = 0;
if (!Double.TryParse(sRadius, out dRadius))
{
return;
}
//we have a valid double value, so we can get ready to edit
IProgressDialogFactory pProgressorDialogFact = new ProgressDialogFactoryClass();
ITrackCancel pTrackCancel = new CancelTracker();
IStepProgressor pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd);
IProgressDialog2 pProgressorDialog = (IProgressDialog2)pStepProgressor;
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadEd.CadastralFabric;
try
{ //turn off the read-only flag on the lines table and points table
pSchemaEd.ReleaseReadOnlyFields(LineSelection.Target, esriCadastralFabricTable.esriCFTLines); //release read-only
pSchemaEd.ReleaseReadOnlyFields((ITable)pFabricPointsFC, esriCadastralFabricTable.esriCFTPoints); //release read-only
//start an edit operation
ArcMap.Editor.StartOperation();
//get an update cursor to make the edit on the line(s)
LineSelection.Update(null, false, out pCur);
pRow = pCur.NextRow();
int iChangeCount = 0;
while (pRow != null)
{
double dChord = (double)pRow.get_Value(idxDistance);
if (Math.Abs(dRadius) <= dChord / 2 && dRadius != 0) //minimum allowable radius is half the chord
{
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
continue;
}
//compute a center point location from new radius, unless it's 0
int iNewCtrPtId = 0;
if (dRadius != 0)
{
IFeature pFeat = pRow as IFeature;
IPoint pCtrPt = ComputeCenterPointFromRadius(pFeat.Shape as IPolyline, dRadius, true);
IFeature pNewPointFeat = pFabricPointsFC.CreateFeature();
//**SAMPLE CODE NOTE** :
//if adding a large number of points (more than 20) then createfeature is not the fastest approach,
//Instead you would pre-allocate points using an insert cursor...
//At this point in the code, the normal geodatabase performance considerations apply
iNewCtrPtId = pNewPointFeat.OID;
pNewPointFeat.set_Value(idxPointX, pCtrPt.X);
pNewPointFeat.set_Value(idxPointY, pCtrPt.Y);
pNewPointFeat.set_Value(idxPointCtrPt, 1); //1 = true boolean
pNewPointFeat.Shape = pCtrPt;
pNewPointFeat.Store();
}
//get the initial radius if the line is a curve (radius is being updated)
object obj = pRow.get_Value(idxRadius);
bool bIsChangingFromCurve = (obj != DBNull.Value); //there is a radius value
obj = pRow.get_Value(idxCenterPtId);
bIsChangingFromCurve = bIsChangingFromCurve && (obj != DBNull.Value); //radius value and Ctr Pt ID exist
int iExistingCtrPtId = 0;
if (bIsChangingFromCurve)
{
iExistingCtrPtId = (int)obj;
}
if (dRadius == 0) //user entered value is zero meaning convert to straight line
{ //changing to a straight line so set the center point an radius to null
pRow.set_Value(idxRadius, DBNull.Value);
pRow.set_Value(idxCenterPtId, DBNull.Value);
}
else if (!bIsChangingFromCurve) //user entered a new radius, and the existing line is not a curve
{ //changing to a circular arc so set the radius, and set the center point id to the new point's OID
pRow.set_Value(idxRadius, dRadius);
pRow.set_Value(idxCenterPtId, iNewCtrPtId);
}
else if (bIsChangingFromCurve) //user entered a radius, and the existing line is a curve
{
pCur.UpdateRow(pRow);
}
iChangeCount++;
Marshal.ReleaseComObject(pRow);
pRow = pCur.NextRow();
}
Marshal.ReleaseComObject(pCur);
if (iChangeCount == 0)
{//if there are no changes then don't add to the edit operation stack
ArcMap.Editor.AbortOperation();
return;
}
if (ListFromToPairsForRadialLines.Count > 0)
{
IQueryFilter pQuFilter = new QueryFilter();
string sCat = LineSelection.Target.Fields.get_Field(idxCategory).Name;
string sToPt = LineSelection.Target.Fields.get_Field(idxToPointID).Name;
string sFromPt = LineSelection.Target.Fields.get_Field(idxFromPointID).Name;
string sParcelID = LineSelection.Target.Fields.get_Field(idxParcelID).Name;
string sInClauseToPts = "(";
string sInClauseFromPts = "(";
string sInClauseParcelIds = "(";
//**SAMPLE CODE NOTE** :
//The following In Clause, when contructed for production environments
//should take into account the token limit on Oracle database platforms. (<1000)
// the processing of the in clause should be broekn into blocks with the in cluase has no more than 1000 elements
foreach (int[] iParcelIdCtrPtIdFromId1FromId2 in ListFromToPairsForRadialLines)
{
if (sInClauseParcelIds.Length == 1)
{
sInClauseParcelIds += iParcelIdCtrPtIdFromId1FromId2[0].ToString();
}
else
{
sInClauseParcelIds += "," + iParcelIdCtrPtIdFromId1FromId2[0].ToString();
}
if (sInClauseToPts.Length == 1)
{
sInClauseToPts += iParcelIdCtrPtIdFromId1FromId2[1].ToString();
}
else
{
sInClauseToPts += "," + iParcelIdCtrPtIdFromId1FromId2[1].ToString();
}
if (sInClauseFromPts.Length == 1)
{
sInClauseFromPts += iParcelIdCtrPtIdFromId1FromId2[2].ToString();
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[3].ToString();
}
else
{
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[2].ToString();
sInClauseFromPts += "," + iParcelIdCtrPtIdFromId1FromId2[2].ToString();
}
}
pQuFilter.WhereClause = sCat + " = 4 AND " + sParcelID + " IN " + sInClauseParcelIds
+ ") AND " + sFromPt + " IN " + sInClauseFromPts
+ ") AND " + sToPt + " IN " + sInClauseToPts + ")";
LineSelection.Target.DeleteSearchedRows(pQuFilter);
}
//with the new information added to the line, the rest of the parcel needs to be updated
//regenerate the parcel using the parcel fidset
ICadastralFabricRegeneration pRegenFabric = new CadastralFabricRegenerator();
#region regenerator enum
// enum esriCadastralRegeneratorSetting
// esriCadastralRegenRegenerateGeometries = 1
// esriCadastralRegenRegenerateMissingRadials = 2,
// esriCadastralRegenRegenerateMissingPoints = 4,
// esriCadastralRegenRemoveOrphanPoints = 8,
// esriCadastralRegenRemoveInvalidLinePoints = 16,
// esriCadastralRegenSnapLinePoints = 32,
// esriCadastralRegenRepairLineSequencing = 64,
// esriCadastralRegenRepairPartConnectors = 128
// By default, the bitmask member is 0 which will only regenerate geometries.
// (equivalent to passing in regeneratorBitmask = 1)
#endregion
pRegenFabric.CadastralFabric = pCadEd.CadastralFabric;
pRegenFabric.RegeneratorBitmask = 7;
pRegenFabric.RegenerateParcels(pFIDSetForParcelRegen, false, pTrackCancel);
//15 (enum values of 8 means remove orphan points; this only works when doing entire fabric)
//TODO: remove orphaned center points programmatically
pStepProgressor.MinRange = 0;
pStepProgressor.MaxRange = iChangeCount;
pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
pRegenFabric.RegenerateParcels(pFIDSetForParcelRegen, false, pTrackCancel);
ArcMap.Editor.StopOperation("Change line radius");
}
catch (Exception ex)
{
ArcMap.Editor.AbortOperation();
MessageBox.Show(ex.Message);
}
finally
{
if (pSchemaEd != null)
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTLines);
}
pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
RefreshMap(LineLayerArray);
ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd;
IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow;
pPropW.RefreshAll();
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
}
}
protected override void OnClick()
{
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete Parcels command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected Parcels");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFParcelLayers = new ArrayClass();
if (!(FabricUTILS.GetFabricSubLayersFromFabric(pMap, pCadFabric, out CFPointLayer, out CFLineLayer,
out CFParcelLayers, out CFControlLayer, out CFLinePointLayer)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ICadastralFabricLayer pCFLayer = null;
ITable pParcelsTable = null;
ITable pLinesTable = null;
ITable pLinePtsTable = null;
ITable pPointsTable = null;
ITable pControlTable = null;
try
{
//Get the selection of parcels
IFeatureLayer pFL = (IFeatureLayer)CFParcelLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
if (bUseNonVersionedDelete)
{
pCFLayer = new CadastralFabricLayerClass();
pCFLayer.CadastralFabric = pCadFabric;
pCadEd.CadastralFabricLayer = pCFLayer;//NOTE: Need to set this back to NULL when done.
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
bMoreThan995UnjoinedParcels = (pSelSet.Count > pCadaSel.SelectedParcelCount); //used for bug workaround
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
pMouseCursor.SetCursor(0);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
return;
}
if (bMoreThan995UnjoinedParcels)
{
m_bShowProgressor = (pSelSet.Count > 10);
}
else
{
m_bShowProgressor = (pCadaSel.SelectedParcelCount > 10);
}
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
if (bMoreThan995UnjoinedParcels)
{
m_pStepProgressor.MaxRange = pSelSet.Count * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
else
{
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 18; //(estimate 7 lines per parcel, 4 pts per parcel, 3 line points per parcel, and there is a second loop on parcel list)
}
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
string[] sOIDList = { "(" };
int tokenLimit = 995;
bool bCont = true;
int j = 0;
int iCounter = 0;
m_pFIDSetParcels = new FIDSetClass();
//===================== start bug workaraound for 10.0 client ===================
if (bMoreThan995UnjoinedParcels)
{
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected parcels
IFeatureCursor pParcelFeatCurs = (IFeatureCursor)pCursor;
IFeature pParcFeat = pParcelFeatCurs.NextFeature();
while (pParcFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetParcels.Find(pParcFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetParcels.Add(pParcFeat.OID);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pParcFeat.OID) + ",";
}
}
Marshal.ReleaseComObject(pParcFeat); //garbage collection
pParcFeat = pParcelFeatCurs.NextFeature();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
//===================== end bug workaraound for 10.0 client ===================
}
else //===the following code path is preferred======
{
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
bCont = m_pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
m_pFIDSetParcels.Add(pGSParcel.DatabaseId);
if (iCounter <= tokenLimit)
{
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
iCounter++;
}
else
{//maximum tokens reached
sOIDList[j] = sOIDList[j].Trim();
iCounter = 0;
//set up the next OIDList
j++;
FabricUTILS.RedimPreserveString(ref sOIDList, 1);
sOIDList[j] = "(";
sOIDList[j] = sOIDList[j] + Convert.ToString(pGSParcel.DatabaseId) + ",";
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
}
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
string sTime = "";
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
//see if parcel locks can be obtained on the selected parcels. First create a job.
DateTime localNow = DateTime.Now;
sTime = Convert.ToString(localNow);
ICadastralJob pJob = new CadastralJobClass();
pJob.Name = sTime;
pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
pJob.Description = "Delete selected parcels";
try
{
Int32 jobId = pCadFabric.CreateJob(pJob);
}
catch (COMException ex)
{
if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
{
MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
}
else
{
MessageBox.Show(ex.Message);
}
return;
}
}
//if we're in an enterprise then test for edit locks
ICadastralFabricLocks pFabLocks = (ICadastralFabricLocks)pCadFabric;
if (!bIsUnVersioned && !bIsFileBasedGDB)
{
pFabLocks.LockingJob = sTime;
ILongArray pLocksInConflict = null;
ILongArray pSoftLcksInConflict = null;
ILongArray pParcelsToLock = new LongArrayClass();
FabricUTILS.FIDsetToLongArray(m_pFIDSetParcels, ref pParcelsToLock, m_pStepProgressor);
if (m_bShowProgressor && !bIsFileBasedGDB)
{
m_pStepProgressor.Message = "Testing for edit locks on parcels...";
}
try
{
pFabLocks.AcquireLocks(pParcelsToLock, true, ref pLocksInConflict, ref pSoftLcksInConflict);
}
catch (COMException pCOMEx)
{
if (pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_LOCK_ALREADY_EXISTS ||
pCOMEx.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_CURRENTLY_EDITED)
{
MessageBox.Show("Edit Locks could not be acquired on all selected parcels.");
// since the operation is being aborted, release any locks that were acquired
pFabLocks.UndoLastAcquiredLocks();
}
else
{
MessageBox.Show(pCOMEx.Message + Environment.NewLine + Convert.ToString(pCOMEx.ErrorCode));
}
return;
}
}
//Build an IDSet of lines for the parcel to be deleted, and build an IDSet of the points for those lines
m_pFIDSetLines = new FIDSetClass();
m_pFIDSetPoints = new FIDSetClass();
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//first delete all the parcel records
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting parcels...";
}
bool bSuccess = true;
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pLinesTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLines);
pLinePtsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
pPointsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTPoints);
pControlTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTControl);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pParcelsTable, m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pParcelsTable,
m_pFIDSetParcels, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (!bIsUnVersioned)
{
//check version and if the Cancel button was not clicked and we're higher than
//version 10.0, then re-try the delete with the core delete command
string sVersion = Application.ProductVersion;
int iErrCode = FabricUTILS.LastErrorCode;
if (!sVersion.StartsWith("10.0") && iErrCode == -2147217400)
{
FabricUTILS.ExecuteCommand("{B0A62C1C-7FAE-457A-AB25-A966B7254EF6}");
}
}
return;
}
//next need to use an in clause for lines, so ...
string[] sPointOIDList = { "" };
int iCnt = 0;
int iTokenCnt = 0;
int iStepCnt = 1;
//...for each item in the sOIDList array
foreach (string inClause in sOIDList)
{
ICursor pLineCurs = FabricUTILS.GetCursorFromCommaSeparatedOIDList(pLinesTable, inClause, "PARCELID");
IRow pRow = pLineCurs.NextRow();
Int32 iFromPt = pLinesTable.Fields.FindField("FROMPOINTID");
Int32 iToPt = pLinesTable.Fields.FindField("TOPOINTID");
while (pRow != null)
{
if (iTokenCnt >= tokenLimit)
{
FabricUTILS.RedimPreserveString(ref sPointOIDList, 1);
iTokenCnt = 0;
iCnt++;
}
m_pFIDSetLines.Add(pRow.OID);
Int32 i = (Int32)pRow.get_Value(iFromPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
i = (Int32)pRow.get_Value(iToPt);
if (i > -1)
{
bool bExists = false;
m_pFIDSetPoints.Find(i, out bExists);
if (!bExists)
{
m_pFIDSetPoints.Add(i);
sPointOIDList[iCnt] = sPointOIDList[iCnt] + Convert.ToString(i) + ",";
iTokenCnt++;
}
}
Marshal.ReleaseComObject(pRow); //garbage collection
pRow = pLineCurs.NextRow();
}
Marshal.ReleaseComObject(pLineCurs); //garbage collection
//delete line records based on the selected parcels
string sMessage = "Deleting lines...";
int iSetCnt = sOIDList.GetLength(0);
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinesTable, m_pFIDSetLines, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//delete the line points for the deleted parcels
//build the list of the line points that need to be deleted.
//IFeatureClass pFeatCLLinePoints = CFLinePointLayer.FeatureClass;
string NewInClause = "";
//remove trailing comma
if ((inClause.Substring(inClause.Length - 1, 1)) == ",")
{
NewInClause = inClause.Substring(0, inClause.Length - 1);
}
//m_pQF.WhereClause = (sPref + "parcelid" + sSuff).Trim() + " IN " + NewInClause + ")";
m_pQF.WhereClause = "PARCELID IN " + NewInClause + ")";
ICursor pLinePointCurs = pLinePtsTable.Search(m_pQF, false);
IRow pLinePointFeat = pLinePointCurs.NextRow();
//Build an IDSet of linepoints for parcels to be deleted
IFIDSet pFIDSetLinePoints = new FIDSetClass();
while (pLinePointFeat != null)
{
pFIDSetLinePoints.Add(pLinePointFeat.OID);
Marshal.ReleaseComObject(pLinePointFeat); //garbage collection
pLinePointFeat = pLinePointCurs.NextRow();
}
//===========deletes linepoints associated with parcels
iSetCnt = sOIDList.GetLength(0);
sMessage = "Deleting line-points...";
if (iSetCnt > 1)
{
sMessage += "Step " + Convert.ToString(iStepCnt) + " of " + Convert.ToString(iSetCnt);
}
if (m_bShowProgressor)
{
m_pStepProgressor.Message = sMessage;
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePtsTable,
pFIDSetLinePoints, m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
if (pLinePointCurs != null)
{
Marshal.ReleaseComObject(pLinePointCurs); //garbage
}
return;
}
///////==============================================
Marshal.ReleaseComObject(pLinePointCurs); //garbage
iStepCnt++;
}
//now need to get points that should not be deleted, because they are used by lines that are not deleted.
//first search for the remaining lines. Any that have from/to points that are in the point fidset are the points
//that should stay
IFIDSet pFIDSetNullGeomLinePtFrom = new FIDSetClass();
IFIDSet pFIDSetNullGeomLinePtTo = new FIDSetClass();
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Updating point delete list...";
}
for (int z = 0; z <= iCnt; z++)
{
//remove trailing comma
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
if ((sPointOIDList[z].Substring(sPointOIDList[z].Length - 1, 1)) == ",")
{
sPointOIDList[z] = sPointOIDList[z].Substring(0, sPointOIDList[z].Length - 1);
}
}
//string TheWhereClause = "(" + (sPref + "frompointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "frompointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
//TheWhereClause = "(" + (sPref + "topointid" + sSuff).Trim() + " IN (";
//UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "topointid",
// TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
string TheWhereClause = "(FROMPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "FROMPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtFrom);
TheWhereClause = "(TOPOINTID IN (";
UpdateDeletePointList(ref sPointOIDList, ref m_pFIDSetPoints, "TOPOINTID",
TheWhereClause, pLinesTable, out pFIDSetNullGeomLinePtTo);
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting points...";
}
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pPointsTable, m_pFIDSetPoints,
m_pStepProgressor, m_pTrackCancel);
}
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
//====Phase 2 of line-point delete. Remove the Line-points that no longer have underlying points.
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Deleting line-points...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
continue;
}
//remove line points where underlying points were deleted
bSuccess = FabricUTILS.DeleteByQuery(pWS, pLinePtsTable, pLinePtsTable.Fields.get_Field(pLinePtsTable.FindField("LinePointID")),
sPointOIDList, !bIsUnVersioned, m_pStepProgressor, m_pTrackCancel);
if (!bSuccess)
{
if (!bIsUnVersioned)
{
pFabLocks.UndoLastAcquiredLocks();
}
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
}
//=====
//Empty geometry on points that are floating points on unjoined parcels
m_pEmptyGeoms = new FIDSetClass();
FabricUTILS.IntersectFIDSetCommonIDs(pFIDSetNullGeomLinePtTo, pFIDSetNullGeomLinePtFrom, out m_pEmptyGeoms);
ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
pSchemaEd.ReleaseReadOnlyFields(pPointsTable, esriCadastralFabricTable.esriCFTPoints); //release safety-catch
if (!bUseNonVersionedDelete)
{
FabricUTILS.EmptyGeometries((IFeatureClass)pPointsTable, m_pEmptyGeoms);
}
else
{
FabricUTILS.EmptyGeometriesUnversioned(pWS, CFPointLayer.FeatureClass, m_pEmptyGeoms);
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTPoints);//set safety back on
if (m_bShowProgressor)
{
m_pStepProgressor.Message = "Resetting control point associations...";
}
for (int z = 0; z <= iCnt; z++)
{
if ((sPointOIDList[z].Trim() == ""))
{
break;
}
//cleanup associated control points, and associations where underlying points were deleted
//m_pQF.WhereClause = (sPref + "pointid" + sSuff).Trim() + " IN (" + sPointOIDList[z] + ")";
m_pQF.WhereClause = "POINTID IN (" + sPointOIDList[z] + ")";
pSchemaEd.ReleaseReadOnlyFields(pControlTable, esriCadastralFabricTable.esriCFTControl); //release safety-catch
if (!FabricUTILS.ResetControlAssociations(pControlTable, m_pQF, bUseNonVersionedDelete))
{
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
}
}
pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTControl);//set safety back on
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete parcels");
}
//clear selection, to make sure the parcel explorer is updated and refreshed properly
if (pFeatSel != null && bMoreThan995UnjoinedParcels)
{
pFeatSel.Clear();
}
}
catch (Exception ex)
{
if (bUseNonVersionedDelete)
{
FabricUTILS.AbortEditing(pWS);
}
if (pEd != null)
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.AbortOperation();
}
}
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFParcelLayers, CFPointLayer, CFLineLayer, CFControlLayer, CFLinePointLayer);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
m_pStepProgressor = null;
if (!(pProgressorDialog == null))
{
pProgressorDialog.HideDialog();
}
pProgressorDialog = null;
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFParcelLayers = null;
CFPointLayer = null;
CFLineLayer = null;
CFControlLayer = null;
CFLinePointLayer = null;
}
}
}
protected override void OnClick()
{
bool bShowProgressor = false;
IStepProgressor pStepProgressor = null;
//Create a CancelTracker.
ITrackCancel pTrackCancel = null;
IProgressDialogFactory pProgressorDialogFact;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
//first get the selected parcel features
UID pUID = new UIDClass();
pUID.Value = "{114D685F-99B7-4B63-B09F-6D1A41A4DDC1}";
ICadastralExtensionManager2 pCadExtMan = (ICadastralExtensionManager2)ArcMap.Application.FindExtensionByCLSID(pUID);
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByCLSID(pUID);
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadExtMan;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Delete linepoint command cannot be used when there is an open job.\r\nPlease finish or discard the open job, and try again.",
"Delete Selected LinePoints");
return;
}
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
IActiveView pActiveView = ArcMap.Document.ActiveView;
IMap pMap = pActiveView.FocusMap;
ICadastralFabric pCadFabric = null;
clsFabricUtils FabricUTILS = new clsFabricUtils();
IProgressDialog2 pProgressorDialog = null;
//if we're in an edit session then grab the target fabric
if (pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
if (!FabricUTILS.GetFabricFromMap(pMap, out pCadFabric))
{
MessageBox.Show
("No Parcel Fabric found in the map.\r\nPlease add a single fabric to the map, and try again.");
return;
}
}
IArray CFLinePointLayers = new ArrayClass();
if (!(FabricUTILS.GetLinePointLayersFromFabric(pMap, pCadFabric, out CFLinePointLayers)))
{
return; //no fabric sublayers available for the targeted fabric
}
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedDelete = false;
IWorkspace pWS = null;
ITable pLinePointTable = null;
try
{
if (pEd.EditState == esriEditState.esriStateEditing)
{
try
{
pEd.StartOperation();
}
catch
{
pEd.AbortOperation();//abort any open edit operations and try again
pEd.StartOperation();
}
}
IFeatureLayer pFL = (IFeatureLayer)CFLinePointLayers.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!FabricUTILS.SetupEditEnvironment(pWS, pCadFabric, pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedDelete))
{
return;
}
//loop through each linepoint layer and
//Get the selection of linepoints
int iCnt = 0;
int iTotalSelectionCount = 0;
for (; iCnt < CFLinePointLayers.Count; iCnt++)
{
pFL = (IFeatureLayer)CFLinePointLayers.get_Element(iCnt);
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
iTotalSelectionCount += pSelSet.Count;
}
if (iTotalSelectionCount == 0)
{
MessageBox.Show("Please select some line points and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFLinePointLayers = null;
}
return;
}
bShowProgressor = (iTotalSelectionCount > 10);
if (bShowProgressor)
{
pProgressorDialogFact = new ProgressDialogFactoryClass();
pTrackCancel = new CancelTrackerClass();
pStepProgressor = pProgressorDialogFact.Create(pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)pStepProgressor;
pStepProgressor.MinRange = 1;
pStepProgressor.MaxRange = iTotalSelectionCount;
pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
//loop through each linepoint layer and
//delete from its selection
m_pQF = new QueryFilterClass();
iCnt = 0;
for (; iCnt < CFLinePointLayers.Count; iCnt++)
{
pFL = (IFeatureLayer)CFLinePointLayers.get_Element(iCnt);
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
string sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
string sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
if (bShowProgressor)
{
pProgressorDialog.ShowDialog();
pStepProgressor.Message = "Collecting line point data...";
}
//Add the OIDs of all the selected linepoints into a new feature IDSet
bool bCont = true;
m_pFIDSetLinePoints = new FIDSetClass();
ICursor pCursor = null;
pSelSet.Search(null, false, out pCursor);//code deletes all selected line points
IFeatureCursor pLinePointFeatCurs = (IFeatureCursor)pCursor;
IFeature pLinePointFeat = pLinePointFeatCurs.NextFeature();
while (pLinePointFeat != null)
{
//Check if the cancel button was pressed. If so, stop process
if (bShowProgressor)
{
bCont = pTrackCancel.Continue();
if (!bCont)
{
break;
}
}
bool bExists = false;
m_pFIDSetLinePoints.Find(pLinePointFeat.OID, out bExists);
if (!bExists)
{
m_pFIDSetLinePoints.Add(pLinePointFeat.OID);
}
Marshal.ReleaseComObject(pLinePointFeat); //garbage collection
pLinePointFeat = pLinePointFeatCurs.NextFeature();
if (bShowProgressor)
{
if (pStepProgressor.Position < pStepProgressor.MaxRange)
{
pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pCursor); //garbage collection
if (!bCont)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
if (bUseNonVersionedDelete)
{
if (!FabricUTILS.StartEditing(pWS, bIsUnVersioned))
{
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
}
return;
}
}
//delete all the line point records
if (bShowProgressor)
{
pStepProgressor.Message = "Deleting selected line points...";
}
bool bSuccess = true;
pLinePointTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTLinePoints);
if (!bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsByFIDSet(pLinePointTable, m_pFIDSetLinePoints, pStepProgressor, pTrackCancel);
}
if (bUseNonVersionedDelete)
{
bSuccess = FabricUTILS.DeleteRowsUnversioned(pWS, pLinePointTable,
m_pFIDSetLinePoints, pStepProgressor, pTrackCancel);
}
if (!bSuccess)
{
AbortEdits(bUseNonVersionedDelete, pEd, pWS);
return;
}
}
if (bUseNonVersionedDelete)
{
FabricUTILS.StopEditing(pWS);
}
if (pEd.EditState == esriEditState.esriStateEditing)
{
pEd.StopOperation("Delete Line Points");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
return;
}
finally
{
RefreshMap(pActiveView, CFLinePointLayers);
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
if (pProgressorDialog != null)
{
pProgressorDialog.HideDialog();
}
if (bUseNonVersionedDelete)
{
pCadEd.CadastralFabricLayer = null;
CFLinePointLayers = null;
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
}
}
protected override void OnClick()
{
IEditor m_pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
if (m_pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing first, and try again.", "Start Editing", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IArray PolygonLyrArr;
IMap pMap = m_pEd.Map;
ICadastralFabric pCadFabric = null;
//if we're in an edit session then grab the target fabric
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
pCadFabric = pCadEd.CadastralFabric;
}
if (pCadFabric == null)
{//find the first fabric in the map
MessageBox.Show
("No Parcel Fabric found in the workspace you're editing.\r\nPlease re-start editing on a workspace with a fabric, and try again.",
"No Fabric found", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
Utilities Utils = new Utilities();
if (!Utils.GetFabricSubLayers(pMap, esriCadastralFabricTable.esriCFTParcels, out PolygonLyrArr))
{
return;
}
//check if there is a Manual Mode "modify" job active ===========
ICadastralPacketManager pCadPacMan = (ICadastralPacketManager)pCadEd;
if (pCadPacMan.PacketOpen)
{
MessageBox.Show("The Area Calculation does not work when the parcel is open.\r\nPlease close the parcel and try again.",
"Calculate Stated Area", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
IActiveView pActiveView = ArcMap.Document.ActiveView;
CalcStatedAreaDLG CalcStatedArea = new CalcStatedAreaDLG();
bool bIsFileBasedGDB = false; bool bIsUnVersioned = false; bool bUseNonVersionedEdit = false;
IWorkspace pWS = null;
ITable pParcelsTable = null;
IProgressDialog2 pProgressorDialog = null;
IMouseCursor pMouseCursor = new MouseCursorClass();
pMouseCursor.SetCursor(2);
var pTool = ArcMap.Application.CurrentTool;
try
{
IFeatureLayer pFL = (IFeatureLayer)PolygonLyrArr.get_Element(0);
IDataset pDS = (IDataset)pFL.FeatureClass;
pWS = pDS.Workspace;
if (!Utils.SetupEditEnvironment(pWS, pCadFabric, m_pEd, out bIsFileBasedGDB,
out bIsUnVersioned, out bUseNonVersionedEdit))
{
return;
}
ICadastralSelection pCadaSel = (ICadastralSelection)pCadEd;
IEnumGSParcels pEnumGSParcels = pCadaSel.SelectedParcels;// need to get the parcels before trying to get the parcel count: BUG workaround
IFeatureSelection pFeatSel = (IFeatureSelection)pFL;
ISelectionSet2 pSelSet = (ISelectionSet2)pFeatSel.SelectionSet;
if (pCadaSel.SelectedParcelCount == 0 && pSelSet.Count == 0)
{
MessageBox.Show("Please select some fabric parcels and try again.", "No Selection",
MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
}
ArcMap.Application.CurrentTool = null;
//Display the dialog
DialogResult pDialogResult = CalcStatedArea.ShowDialog();
if (pDialogResult != DialogResult.OK)
{
return;
}
m_bShowProgressor = (pSelSet.Count > 10) || pCadaSel.SelectedParcelCount > 10;
if (m_bShowProgressor)
{
m_pProgressorDialogFact = new ProgressDialogFactoryClass();
m_pTrackCancel = new CancelTrackerClass();
m_pStepProgressor = m_pProgressorDialogFact.Create(m_pTrackCancel, ArcMap.Application.hWnd);
pProgressorDialog = (IProgressDialog2)m_pStepProgressor;
m_pStepProgressor.MinRange = 1;
m_pStepProgressor.MaxRange = pCadaSel.SelectedParcelCount * 3; //(3 runs through the selection)
m_pStepProgressor.StepValue = 1;
pProgressorDialog.Animation = ESRI.ArcGIS.Framework.esriProgressAnimationTypes.esriProgressSpiral;
}
m_pQF = new QueryFilterClass();
string sPref; string sSuff;
ISQLSyntax pSQLSyntax = (ISQLSyntax)pWS;
sPref = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierPrefix);
sSuff = pSQLSyntax.GetSpecialCharacter(esriSQLSpecialCharacters.esriSQL_DelimitedIdentifierSuffix);
//====== need to do this for all the parcel sublayers in the map that are part of the target fabric
//pEnumGSParcels should take care of this automatically
//but need to do this for line sublayer
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Collecting parcel data...";
}
//Add the OIDs of all the selected parcels into a new feature IDSet
int tokenLimit = 995;
List <int> oidList = new List <int>();
Dictionary <int, string> dict_ParcelSelection2CalculatedArea = new Dictionary <int, string>();
pParcelsTable = (ITable)pCadFabric.get_CadastralTable(esriCadastralFabricTable.esriCFTParcels);
pEnumGSParcels.Reset();
IGSParcel pGSParcel = pEnumGSParcels.Next();
while (pGSParcel != null)
{
//Check if the cancel button was pressed. If so, stop process
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
int iDBId = pGSParcel.DatabaseId;
if (!oidList.Contains(iDBId))
{
oidList.Add(iDBId);
}
Marshal.ReleaseComObject(pGSParcel); //garbage collection
pGSParcel = pEnumGSParcels.Next();
if (m_bShowProgressor)
{
if (m_pStepProgressor.Position < m_pStepProgressor.MaxRange)
{
m_pStepProgressor.Step();
}
}
}
Marshal.ReleaseComObject(pEnumGSParcels); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
string sSuffixUnit = CalcStatedArea.txtSuffix.Text;
int iAreaPrec = (int)CalcStatedArea.numDecPlaces.Value;
double dSqMPerUnit = 1;
if (CalcStatedArea.cboAreaUnit.FindStringExact("Acres") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 4046.86;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Hectares") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 10000;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290304;
}
if (CalcStatedArea.cboAreaUnit.FindStringExact("Square Feet US") == CalcStatedArea.cboAreaUnit.SelectedIndex)
{
dSqMPerUnit = 0.09290341;
}
if (m_bShowProgressor)
{
pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Computing areas...";
}
List <string> sInClauseList0 = null;
m_pQF = new QueryFilterClass();
if (oidList.Count() > 0)
{
sInClauseList0 = Utils.InClauseFromOIDsList(oidList, tokenLimit);
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
CalculateStatedArea(m_pQF, pParcelsTable, pCadEd, m_pEd.Map.SpatialReference, dSqMPerUnit, sSuffixUnit,
iAreaPrec, ref dict_ParcelSelection2CalculatedArea, m_pTrackCancel);
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
}
}
else
{
return;
}
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
return;
}
}
#region Create Cadastral Job
//string sTime = "";
//if (!bIsUnVersioned && !bIsFileBasedGDB)
//{
// //see if parcel locks can be obtained on the selected parcels. First create a job.
// DateTime localNow = DateTime.Now;
// sTime = Convert.ToString(localNow);
// ICadastralJob pJob = new CadastralJobClass();
// pJob.Name = sTime;
// pJob.Owner = System.Windows.Forms.SystemInformation.UserName;
// pJob.Description = "Interpolate Z values on selected features";
// try
// {
// Int32 jobId = pCadFabric.CreateJob(pJob);
// }
// catch (COMException ex)
// {
// if (ex.ErrorCode == (int)fdoError.FDO_E_CADASTRAL_FABRIC_JOB_ALREADY_EXISTS)
// {
// MessageBox.Show("Job named: '" + pJob.Name + "', already exists");
// }
// else
// {
// MessageBox.Show(ex.Message);
// }
// return;
// }
//}
#endregion
//ILongArray pTempParcelsLongArray = new LongArrayClass();
//List<int> lstParcelChanges = Utils.FIDsetToLongArray(m_pFIDSetParcels, ref pTempParcelsLongArray, ref pParcelIds, m_pStepProgressor);
if (m_pEd.EditState == esriEditState.esriStateEditing)
{
try
{
m_pEd.StartOperation();
}
catch
{
m_pEd.AbortOperation();//abort any open edit operations and try again
m_pEd.StartOperation();
}
}
if (bUseNonVersionedEdit)
{
if (!Utils.StartEditing(pWS, bIsUnVersioned))
{
return;
}
}
//ICadastralFabricSchemaEdit2 pSchemaEd = (ICadastralFabricSchemaEdit2)pCadFabric;
//pSchemaEd.ReleaseReadOnlyFields(pParcelsTable, esriCadastralFabricTable.esriCFTParcels);
int idxParcelStatedArea = pParcelsTable.FindField("STATEDAREA");
string ParcelStatedAreaFieldName = pParcelsTable.Fields.get_Field(idxParcelStatedArea).Name;
if (m_bShowProgressor)
{
// pProgressorDialog.ShowDialog();
m_pStepProgressor.Message = "Updating parcel areas...";
}
IRow pTheFeatRow = null;
ICursor pUpdateCursor = null;
foreach (string sInClause in sInClauseList0)
{
m_pQF.WhereClause = pParcelsTable.OIDFieldName + " IN (" + sInClause + ")";
if (bUseNonVersionedEdit)
{
ITableWrite pTableWr = (ITableWrite)pParcelsTable; //used for unversioned table
pUpdateCursor = pTableWr.UpdateRows(m_pQF, false);
}
else
{
pUpdateCursor = pParcelsTable.Update(m_pQF, false);
}
pTheFeatRow = pUpdateCursor.NextRow();
while (pTheFeatRow != null)
{
string sAreaString = dict_ParcelSelection2CalculatedArea[pTheFeatRow.OID];
pTheFeatRow.set_Value(idxParcelStatedArea, sAreaString);
pTheFeatRow.Store();
Marshal.ReleaseComObject(pTheFeatRow); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
pTheFeatRow = pUpdateCursor.NextRow();
}
Marshal.ReleaseComObject(pUpdateCursor); //garbage collection
if (m_bShowProgressor)
{
if (!m_pTrackCancel.Continue())
{
break;
}
}
}
m_pEd.StopOperation("Calculate Stated Area");
//pSchemaEd.ResetReadOnlyFields(esriCadastralFabricTable.esriCFTParcels);//set fields back to read-only
}
catch (Exception ex)
{
if (m_pEd != null)
{
AbortEdits(bIsUnVersioned, m_pEd, pWS);
}
MessageBox.Show(ex.Message);
}
finally
{
ArcMap.Application.CurrentTool = pTool;
m_pStepProgressor = null;
m_pTrackCancel = null;
if (pProgressorDialog != null)
{
pProgressorDialog.HideDialog();
}
RefreshMap(pActiveView, PolygonLyrArr);
ICadastralExtensionManager pCExMan = (ICadastralExtensionManager)pCadEd;
IParcelPropertiesWindow2 pPropW = (IParcelPropertiesWindow2)pCExMan.ParcelPropertiesWindow;
pPropW.RefreshAll();
//update the TOC
IMxDocument mxDocument = (ESRI.ArcGIS.ArcMapUI.IMxDocument)(ArcMap.Application.Document);
for (int i = 0; i < mxDocument.ContentsViewCount; i++)
{
IContentsView pCV = (IContentsView)mxDocument.get_ContentsView(i);
pCV.Refresh(null);
}
// refresh the attributes dialog
ISelectionEvents pSelEvents = (ISelectionEvents)m_pEd.Map;
pSelEvents.SelectionChanged();
if (bUseNonVersionedEdit)
{
pCadEd.CadastralFabricLayer = null;
PolygonLyrArr = null;
}
if (pMouseCursor != null)
{
pMouseCursor.SetCursor(0);
}
}
}