private void CreateParcelFromSegmentCollection(ISegmentCollection Segments, string PlanName)
{
int iCnt = Segments.SegmentCount;
ISegment[] pSegmentArr = new ISegment[iCnt];
for (int j = 0; j < iCnt; j++)
{
pSegmentArr[j] = Segments.get_Segment(j);
}
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
try
{
ICadastralPacketManager pCadPacketMan = (ICadastralPacketManager)pCadEd;
bool bStartedWithPacketOpen = pCadPacketMan.PacketOpen;
if (!bStartedWithPacketOpen)
{
m_editor.StartOperation();
}
//1. Start map edit session
ICadastralMapEdit pCadMapEdit = (ICadastralMapEdit)pCadEd;
pCadMapEdit.StartMapEdit(esriMapEditType.esriMEEmpty, "NewParcel", false);
//2. Get job packet
ICadastralPacket pCadaPacket = pCadPacketMan.JobPacket;
//3. Create Plan (new)
string sPlanName = PlanName;
//first check to ensure plan is not already in the database.
IGSPlan pGSPlan = FindFabricPlanByName(sPlanName, pCadEd);
if (pGSPlan == null)
{
//if plan is null, it was not found and can be created
pGSPlan = new GSPlanClass();
// 3.a set values
pGSPlan.Accuracy = 4;
pGSPlan.Name = sPlanName;
}
//3.b Add the plan to the job packet
ICadastralPlan pCadaPlan = (ICadastralPlan)pCadaPacket;
pCadaPlan.AddPlan(pGSPlan);
//4. Create Parcel
ICadastralParcel pCadaParcel = (ICadastralParcel)pCadaPacket;
IGSParcel pNewGSParcel = new GSParcelClass();
//Make sure that any extended attributes on the parcel have their default values set
IGSAttributes pGSAttributes = (IGSAttributes)pNewGSParcel;
if (pGSAttributes != null)
{
ICadastralObjectSetup pCadaObjSetup = (ICadastralObjectSetup)pParcEditorMan;
pCadaObjSetup.AddExtendedAttributes(pGSAttributes);
pCadaObjSetup.SetDefaultValues(pGSAttributes);
}
//4a. Add the parcel to the packet. (do this before addlines)
// - This will enable us to Acquire the parcel ID,
// - Having the parcel attached to the packet allows InsertLine to function.
pCadaParcel.AddParcel(pNewGSParcel);
pNewGSParcel.Lot = "NewParcel";
pNewGSParcel.Type = 7;
//4b. Set Plan (created above)
IGSPlan thePlan = pCadaPlan.GetPlan(sPlanName);
pNewGSParcel.Plan = thePlan;
//4c. Insert GSLines (from new) into GSParcel
//4d. To bypass join, you can create GSPoints and assign those point IDs to the GSLines.
ICadastralPoints pCadaPoints = (ICadastralPoints)pCadaPacket;
IMetricUnitConverter pMetricUnitConv = (IMetricUnitConverter)pCadEd;
//Set up the initial start point, POB
IPoint pPt1 = Segments.get_Segment(0).FromPoint;
IZAware pZAw = (IZAware)pPt1;
pZAw.ZAware = true;
pPt1.Z = 0; //defaulting to 0
//Convert the point into metric units, and get a new (in-mem) point id
IGSPoint pGSPointFrom = pMetricUnitConv.SetGSPoint(pPt1);
pCadaPoints.AddPoint(pGSPointFrom);
int iID1 = pGSPointFrom.Id;
int iID1_Orig = iID1;
int index = 0;
IGSLine pGSLine = null;
//++++++++++++ Add Courses ++++++++++++++
int iID2 = -1;
bool bIsLoop = (Math.Abs(pPt1.X - Segments.get_Segment(iCnt - 1).ToPoint.X)) < 0.01 &&
(Math.Abs(pPt1.Y - Segments.get_Segment(iCnt - 1).ToPoint.Y)) < 0.01;
IAngularConverter pAngConv = new AngularConverterClass();
for (int j = 0; j < iCnt; j++)
{
pSegmentArr[j] = Segments.get_Segment(j);
double dDir = 0; //radians north azimuth
ILine pLineOrChord = new LineClass();
pLineOrChord.PutCoords(pSegmentArr[j].FromPoint, pSegmentArr[j].ToPoint);
if (pAngConv.SetAngle(pLineOrChord.Angle, esriDirectionType.esriDTPolar, esriDirectionUnits.esriDURadians))
{
dDir = pAngConv.GetAngle(esriDirectionType.esriDTNorthAzimuth, esriDirectionUnits.esriDURadians);
}
double dDist = pLineOrChord.Length;
double dRadius = 0;
int iAccuracy = -1;
int iUserLineType = -1;
int iCategory = -1;
if (pSegmentArr[j] is ICircularArc)
{
ICircularArc pCircArc = pSegmentArr[j] as ICircularArc;
dRadius = pCircArc.Radius;
if (pCircArc.IsCounterClockwise)
{
dRadius = dRadius * -1;
}
}
bool bComputeToPoint = (bIsLoop && (j < iCnt - 1)) || !bIsLoop;
//From, Direction (NAz Radians), Distance (map's projection units), Radius
pGSLine = CreateGSLine(pMetricUnitConv, pCadaPoints, ref pPt1,
iID1, dDir, dDist, dRadius, iAccuracy, iUserLineType, iCategory, bComputeToPoint, out iID2);
if (j < iCnt - 1 || !bIsLoop)
{
iID1 = iID2;
}
else if ((j == iCnt - 1) && bIsLoop)
{
pGSLine.ToPoint = iID1_Orig; //closing the traverse back to the POB
}
iID2 = -1;
//Add the line to the new parcel
if (pGSLine != null)
{
pNewGSParcel.InsertLine(++index, pGSLine);
}
}
//Add radial lines for circular curves
pNewGSParcel.AddRadialLines();
// 4.e then set join=true on the parcel.
pNewGSParcel.Joined = true;
//let the packet know that a change has been made
pCadPacketMan.SetPacketModified(true);
//save the new parcel
try
{
pCadMapEdit.StopMapEdit(true);
}
catch
{
if (!bStartedWithPacketOpen)
{
m_editor.AbortOperation();
}
return;
}
if (!bStartedWithPacketOpen)
{
m_editor.StopOperation("New Parcel");
}
pCadPacketMan.PartialRefresh();
}
catch (Exception ex)
{
m_editor.AbortOperation();
MessageBox.Show(ex.Message);
}
}
protected override void OnClick()
{
// **SAMPLE CODE NOTE**
// the following code show the mechanics of creating a new parcel using the ICadastralMapEdit interface
// there is no user interface to enter parcel record data, and the parcel line records are hard -coded
// for the purposes of this sample code. The center of the map extent is used as the point of beginning
// for the parcel.
ICadastralEditor pCadEd = (ICadastralEditor)ArcMap.Application.FindExtensionByName("esriCadastralUI.CadastralEditorExtension");
IParcelEditManager pParcEditorMan = (IParcelEditManager)pCadEd;
IEditor pEd = (IEditor)ArcMap.Application.FindExtensionByName("esri object editor");
if (pEd.EditState == esriEditState.esriStateNotEditing)
{
MessageBox.Show("Please start editing and try again.");
return;
}
try
{
ICadastralPacketManager pCadPacketMan = (ICadastralPacketManager)pCadEd;
bool bStartedWithPacketOpen = pCadPacketMan.PacketOpen;
if (!bStartedWithPacketOpen)
{
pEd.StartOperation();
}
//1. Start map edit session
ICadastralMapEdit pCadMapEdit = (ICadastralMapEdit)pCadEd;
pCadMapEdit.StartMapEdit(esriMapEditType.esriMEEmpty, "NewParcel", false);
//2. Get job packet
ICadastralPacket pCadaPacket = pCadPacketMan.JobPacket;
//3. Create Plan (new)
string sPlanName = "My New Plan";
//first check to ensure plan is not already in the database.
IGSPlan pGSPlan = FindFabricPlanByName(sPlanName, pCadEd);
if (pGSPlan == null)
{
//if plan is null, it was not found and can be created
pGSPlan = new GSPlanClass();
// 3.a set values
pGSPlan.Accuracy = 4;
pGSPlan.Name = sPlanName;
}
//3.b Add the plan to the job packet
ICadastralPlan pCadaPlan = (ICadastralPlan)pCadaPacket;
pCadaPlan.AddPlan(pGSPlan);
//4. Create Parcel
ICadastralParcel pCadaParcel = (ICadastralParcel)pCadaPacket;
IGSParcel pNewGSParcel = new GSParcelClass();
//Make sure that any extended attributes on the parcel have their default values set
IGSAttributes pGSAttributes = (IGSAttributes)pNewGSParcel;
if (pGSAttributes != null)
{
ICadastralObjectSetup pCadaObjSetup = (ICadastralObjectSetup)pParcEditorMan;
pCadaObjSetup.AddExtendedAttributes(pGSAttributes);
pCadaObjSetup.SetDefaultValues(pGSAttributes);
}
//4a. Add the parcel to the packet. (do this before addlines)
// - This will enable us to Acquire the parcel ID,
// - Having the parcel attached to the packet allows InsertLine to function.
pCadaParcel.AddParcel(pNewGSParcel);
pNewGSParcel.Lot = "NewParcel";
pNewGSParcel.Type = 7;
//4b. Set Plan (created above)
IGSPlan thePlan = pCadaPlan.GetPlan(sPlanName);
pNewGSParcel.Plan = thePlan;
//4c. Insert GSLines (from new) into GSParcel
//4d. To bypass join, you can create GSPoints and assign those point IDs to the GSLines.
ICadastralPoints pCadaPoints = (ICadastralPoints)pCadaPacket;
IMetricUnitConverter pMetricUnitConv = (IMetricUnitConverter)pCadEd;
//Set up the initial start point, POB
//This sample code starts from the middle of the map, and defines 4 lines of a parcel
//The first course is a straight line, the other 3 courses are circular arcs
IArea pArea = (IArea)ArcMap.Document.ActiveView.Extent;
IPoint pPt1 = pArea.Centroid;
IZAware pZAw = (IZAware)pPt1;
pZAw.ZAware = true;
pPt1.Z = 0; //defaulting to 0
//Convert the point into metric units, and get a new (in-mem) point id
IGSPoint pGSPointFrom = pMetricUnitConv.SetGSPoint(pPt1);
pCadaPoints.AddPoint(pGSPointFrom);
int iID1 = pGSPointFrom.Id;
int index = 0;
//++++++++++++ Course 1 ++++++++++++++
int iID2 = -1;
//From, Direction (NAz Radians), Distance (map's projection units), Radius
IGSLine pGSLine = CreateGSLine(pMetricUnitConv, pCadaPoints, ref pPt1,
iID1, 0, 100, 0, -1, -1, -1, true, out iID2);
//Add the line to the new parcel
if (pGSLine != null)
{
pNewGSParcel.InsertLine(++index, pGSLine);
}
//++++++++++++ Course 2 ++++++++++++++
int iID3 = -1;
pGSLine = CreateGSLine(pMetricUnitConv, pCadaPoints, ref pPt1,
iID2, (Math.PI / 2), 100, -80, -1, -1, -1, true, out iID3);
if (pGSLine != null)
{
pNewGSParcel.InsertLine(++index, pGSLine);
}
//++++++++++++ Course 3 ++++++++++++++
int iID4 = -1;
pGSLine = CreateGSLine(pMetricUnitConv, pCadaPoints, ref pPt1,
iID3, Math.PI, 100, 80, -1, -1, -1, true, out iID4);
if (pGSLine != null)
{
pNewGSParcel.InsertLine(++index, pGSLine);
}
//++++++++++++ Course 4 ++++++++++++++
//close back to point of beginning
int i = -1;
pGSLine = CreateGSLine(pMetricUnitConv, pCadaPoints, ref pPt1,
iID4, (3 * Math.PI / 2), 100, 200, -1, -1, -1, false, out i);
pGSLine.ToPoint = iID1; //closing the traverse back to the POB
if (pGSLine != null)
{
pNewGSParcel.InsertLine(++index, pGSLine);
}
//Add radial lines for circular curves
pNewGSParcel.AddRadialLines();
// 4.e then set join=true on the parcel.
pNewGSParcel.Joined = true;
//let the packet know that a change has been made
pCadPacketMan.SetPacketModified(true);
//save the new parcel
try
{
pCadMapEdit.StopMapEdit(true);
}
catch
{
if (!bStartedWithPacketOpen)
{
pEd.AbortOperation();
}
return;
}
if (!bStartedWithPacketOpen)
{
pEd.StopOperation("New Parcel");
}
pCadPacketMan.PartialRefresh();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}