private void About_Load(object sender, System.EventArgs e)
{
GrblInfo.Get();
txtGrblVersion.Content = GrblInfo.Version;
txtGrblOptions.Content = GrblInfo.Options;
txtGrblNewOpts.Content = GrblInfo.NewOptions;
grpGrbl.Header = GrblSettings.IsGrblHAL ? "grblHAL" : "grbl";
if (GrblInfo.Identity != "")
{
grpGrbl.Header += ": " + GrblInfo.Identity;
}
}
private void Window_Loaded(object sender, RoutedEventArgs e)
{
System.Threading.Thread.Sleep(50);
Comms.com.PurgeQueue();
using (new UIUtils.WaitCursor())
{
GrblInfo.Get();
GrblSettings.Get();
}
configView.Activate(true, ViewType.Startup);
}
public UserUI()
{
string PortParams = "";
InitializeComponent();
try
{
XmlDocument config = new XmlDocument();
config.Load(Application.StartupPath + "\\App.config");
foreach (XmlNode N in config.SelectNodes("Config/*"))
{
switch (N.Name)
{
case "PortParams":
PortParams = N.InnerText;
break;
}
}
}
catch
{
MessageBox.Show("Config file not found or invalid.", this.Text);
System.Environment.Exit(1);
}
#if DEBUG
PortParams = "com29:115200,N,8,1,P";
#endif
new SerialComms(PortParams, Comms.ResetMode.None);
if (!Comms.com.IsOpen)
{
this.com = null;
MessageBox.Show("Unable to open serial port!", this.Text);
System.Environment.Exit(2);
}
GrblLanguage.language = "en_US";
GrblInfo.Get();
GrblSettings.Load();
this.Text += ", Grbl version " + GrblInfo.Version;
}
private void Window_Loaded(object sender, RoutedEventArgs e)
{
System.Threading.Thread.Sleep(50);
Comms.com.PurgeQueue();
using (new UIUtils.WaitCursor())
{
GrblInfo.Get();
GrblSettings.Load();
}
halsettings.IsEnabled = grblsettings.IsEnabled = GrblInfo.IsGrblHAL && GrblInfo.Build >= 20210819;
grblalarms.IsEnabled = grblerrors.IsEnabled = GrblInfo.IsGrblHAL && GrblInfo.Build >= 20210823;
configView.Activate(true, ViewType.Startup);
}
private void About_Load(object sender, System.EventArgs e)
{
Title = version;
if (CNC.Core.Resources.IsLegacyController)
{
Title += " (legacy mode)";
}
GrblInfo.Get();
txtGrblVersion.Content = GrblInfo.Version;
txtGrblOptions.Content = GrblInfo.Options;
txtGrblNewOpts.Content = GrblInfo.NewOptions;
txtGrblConnection.Content = AppConfig.Settings.Base.PortParams;
grpGrbl.Header = GrblInfo.Firmware;
if (GrblInfo.Identity != "")
{
grpGrbl.Header += ": " + GrblInfo.Identity;
}
}
bool InitSystem()
{
initOK = true;
int timeout = 5;
using (new UIUtils.WaitCursor())
{
GCodeSender.EnablePolling(false);
while (!GrblInfo.Get())
{
if (--timeout == 0)
{
model.Message = (string)FindResource("MsgNoResponse");
return(false);
}
Thread.Sleep(500);
}
GrblAlarms.Get();
GrblErrors.Get();
GrblSettings.Load();
if (GrblInfo.IsGrblHAL)
{
GrblParserState.Get();
GrblWorkParameters.Get();
}
else
{
GrblParserState.Get(true);
}
GCodeSender.EnablePolling(true);
}
GrblCommand.ToolChange = GrblInfo.ManualToolChange ? "M61Q{0}" : "T{0}";
showProgramLimits();
if (!AppConfig.Settings.GCodeViewer.IsEnabled)
{
tabGCode.Items.Remove(tab3D);
}
if (GrblInfo.NumAxes > 3)
{
limitsControl.Visibility = Visibility.Collapsed;
}
if (GrblInfo.LatheModeEnabled)
{
MainWindow.EnableView(true, ViewType.Turning);
// MainWindow.EnableView(true, ViewType.Parting);
// MainWindow.EnableView(true, ViewType.Facing);
MainWindow.EnableView(true, ViewType.G76Threading);
}
else
{
MainWindow.ShowView(false, ViewType.Turning);
MainWindow.ShowView(false, ViewType.Parting);
MainWindow.ShowView(false, ViewType.Facing);
MainWindow.ShowView(false, ViewType.G76Threading);
}
if (GrblInfo.HasSDCard)
{
MainWindow.EnableView(true, ViewType.SDCard);
}
else
{
MainWindow.ShowView(false, ViewType.SDCard);
}
if (GrblInfo.HasPIDLog)
{
MainWindow.EnableView(true, ViewType.PIDTuner);
}
else
{
MainWindow.ShowView(false, ViewType.PIDTuner);
}
if (GrblInfo.NumTools > 0)
{
MainWindow.EnableView(true, ViewType.Tools);
}
else
{
MainWindow.ShowView(false, ViewType.Tools);
}
if (GrblInfo.HasProbe && GrblSettings.ReportProbeCoordinates)
{
MainWindow.EnableView(true, ViewType.Probing);
}
MainWindow.EnableView(true, ViewType.Offsets);
MainWindow.EnableView(true, ViewType.GRBLConfig);
if (!string.IsNullOrEmpty(GrblInfo.TrinamicDrivers))
{
MainWindow.EnableView(true, ViewType.TrinamicTuner);
}
else
{
MainWindow.ShowView(false, ViewType.TrinamicTuner);
}
return(true);
}
private void InitSystem()
{
initOK = true;
// TODO: check if grbl is in a state that allows replies
using (new UIUtils.WaitCursor())
{
GCodeSender.EnablePolling(false);
GrblInfo.Get();
GrblSettings.Get();
GrblParserState.Get();
GrblWorkParameters.Get();
GCodeSender.EnablePolling(true);
}
model.Message = "";
GrblCommand.ToolChange = GrblInfo.ManualToolChange ? "M61Q{0}" : "T{0}";
GCodeSender.Config(MainWindow.UIViewModel.Profile.Config);
if (GrblInfo.NumAxes > 3)
{
limitsControl.Visibility = Visibility.Collapsed;
}
if (GrblInfo.LatheModeEnabled)
{
MainWindow.EnableView(true, ViewType.Turning);
MainWindow.EnableView(true, ViewType.Facing);
MainWindow.EnableView(true, ViewType.G76Threading);
}
else
{
MainWindow.ShowView(false, ViewType.Turning);
MainWindow.ShowView(false, ViewType.Facing);
MainWindow.ShowView(false, ViewType.G76Threading);
}
if (GrblInfo.HasSDCard)
{
MainWindow.EnableView(true, ViewType.SDCard);
}
else
{
MainWindow.ShowView(false, ViewType.SDCard);
}
if (GrblInfo.HasPIDLog)
{
MainWindow.EnableView(true, ViewType.PIDTuner);
}
else
{
MainWindow.ShowView(false, ViewType.PIDTuner);
}
if (GrblInfo.NumTools > 0)
{
MainWindow.EnableView(true, ViewType.Tools);
}
else
{
MainWindow.ShowView(false, ViewType.Tools);
}
MainWindow.EnableView(true, ViewType.Offsets);
MainWindow.EnableView(true, ViewType.GRBLConfig);
if (!string.IsNullOrEmpty(GrblInfo.TrinamicDrivers))
{
MainWindow.EnableView(true, ViewType.TrinamicTuner);
}
else
{
MainWindow.ShowView(false, ViewType.TrinamicTuner);
}
MainWindow.GCodePush += GCode.File.AddBlock;
}
private void InitSystem()
{
initOK = true;
// TODO: check if grbl is in a state that allows replies
using (new UIUtils.WaitCursor())
{
GCodeSender.EnablePolling(false);
GrblInfo.Get();
GrblSettings.Get();
GrblParserState.Get();
GrblWorkParameters.Get();
GCodeSender.EnablePolling(true);
}
model.Message = string.Empty;
GrblCommand.ToolChange = GrblInfo.ManualToolChange ? "M61Q{0}" : "T{0}";
if (keyboard == null)
{
keyboard = new KeypressHandler(model);
GCodeSender.Configure(keyboard);
gcodeRenderer.Configure();
}
showProgramLimits();
if (!AppConfig.Settings.GCodeViewer.IsEnabled)
{
tabGCode.Items.Remove(tab3D);
}
if (GrblInfo.NumAxes > 3)
{
limitsControl.Visibility = Visibility.Collapsed;
}
if (GrblInfo.LatheModeEnabled)
{
MainWindow.EnableView(true, ViewType.Turning);
MainWindow.EnableView(true, ViewType.Facing);
MainWindow.EnableView(true, ViewType.G76Threading);
}
else
{
MainWindow.ShowView(false, ViewType.Turning);
MainWindow.ShowView(false, ViewType.Facing);
MainWindow.ShowView(false, ViewType.G76Threading);
}
if (GrblInfo.HasSDCard)
{
MainWindow.EnableView(true, ViewType.SDCard);
}
else
{
MainWindow.ShowView(false, ViewType.SDCard);
}
if (GrblInfo.HasPIDLog)
{
MainWindow.EnableView(true, ViewType.PIDTuner);
}
else
{
MainWindow.ShowView(false, ViewType.PIDTuner);
}
if (GrblInfo.NumTools > 0)
{
MainWindow.EnableView(true, ViewType.Tools);
}
else
{
MainWindow.ShowView(false, ViewType.Tools);
}
MainWindow.EnableView(true, ViewType.Probing);
MainWindow.EnableView(true, ViewType.Offsets);
MainWindow.EnableView(true, ViewType.GRBLConfig);
if (!string.IsNullOrEmpty(GrblInfo.TrinamicDrivers))
{
MainWindow.EnableView(true, ViewType.TrinamicTuner);
}
else
{
MainWindow.ShowView(false, ViewType.TrinamicTuner);
}
}
private void InitSystem()
{
initOK = true;
int timeout = 5;
using (new UIUtils.WaitCursor())
{
GCodeSender.EnablePolling(false);
while (!GrblInfo.Get())
{
if (--timeout == 0)
{
model.Message = "Controller is not responding!";
initOK = false;
}
Thread.Sleep(500);
}
GrblAlarms.Get();
GrblErrors.Get();
GrblSettings.Get();
GrblParserState.Get();
GrblWorkParameters.Get();
GCodeSender.EnablePolling(true);
}
GrblCommand.ToolChange = GrblInfo.ManualToolChange ? "M61Q{0}" : "T{0}";
if (keyboard == null)
{
keyboard = new KeypressHandler(model);
GCodeSender.Configure(keyboard);
gcodeRenderer.Configure();
}
showProgramLimits();
if (!AppConfig.Settings.GCodeViewer.IsEnabled)
{
tabGCode.Items.Remove(tab3D);
}
if (GrblInfo.NumAxes > 3)
{
limitsControl.Visibility = Visibility.Collapsed;
}
if (GrblInfo.LatheModeEnabled)
{
MainWindow.EnableView(true, ViewType.Turning);
// MainWindow.EnableView(true, ViewType.Parting);
// MainWindow.EnableView(true, ViewType.Facing);
MainWindow.EnableView(true, ViewType.G76Threading);
}
else
{
MainWindow.ShowView(false, ViewType.Turning);
MainWindow.ShowView(false, ViewType.Parting);
MainWindow.ShowView(false, ViewType.Facing);
MainWindow.ShowView(false, ViewType.G76Threading);
}
if (GrblInfo.HasSDCard)
{
MainWindow.EnableView(true, ViewType.SDCard);
}
else
{
MainWindow.ShowView(false, ViewType.SDCard);
}
if (GrblInfo.HasPIDLog)
{
MainWindow.EnableView(true, ViewType.PIDTuner);
}
else
{
MainWindow.ShowView(false, ViewType.PIDTuner);
}
if (GrblInfo.NumTools > 0)
{
MainWindow.EnableView(true, ViewType.Tools);
}
else
{
MainWindow.ShowView(false, ViewType.Tools);
}
if (GrblInfo.HasProbe && GrblSettings.ReportProbeCoordinates)
{
MainWindow.EnableView(true, ViewType.Probing);
}
MainWindow.EnableView(true, ViewType.Offsets);
MainWindow.EnableView(true, ViewType.GRBLConfig);
if (!string.IsNullOrEmpty(GrblInfo.TrinamicDrivers))
{
MainWindow.EnableView(true, ViewType.TrinamicTuner);
}
else
{
MainWindow.ShowView(false, ViewType.TrinamicTuner);
}
}
private void InitSystem()
{
initOK = true;
// TODO: check if grbl is in a state that allows replies
using (new UIUtils.WaitCursor())
{
GCodeSender.EnablePolling(false);
GrblInfo.Get();
GrblSettings.Get();
GrblParserState.Get();
GrblWorkParameters.Get();
GCodeSender.EnablePolling(true);
}
workParametersControl.ToolChangeCommand = GrblInfo.ManualToolChange ? "T{0}M6" : "T{0}";
GCodeSender.Config();
if (GrblInfo.LatheModeEnabled)
{
DRO.EnableLatheMode();
signalsControl.SetLatheMode();
MainWindow.EnableView(true, ViewType.Turning);
MainWindow.EnableView(true, ViewType.Facing);
MainWindow.EnableView(true, ViewType.G76Threading);
}
else
{
DRO.SetNumAxes(GrblInfo.NumAxes);
signalsControl.SetNumAxes(GrblInfo.NumAxes);
MainWindow.ShowView(false, ViewType.Turning);
MainWindow.ShowView(false, ViewType.Facing);
MainWindow.ShowView(false, ViewType.G76Threading);
}
if (GrblInfo.HasSDCard)
{
MainWindow.EnableView(true, ViewType.SDCard);
}
else
{
MainWindow.ShowView(false, ViewType.SDCard);
}
if (GrblInfo.HasPIDLog)
{
MainWindow.EnableView(true, ViewType.PIDTuner);
}
else
{
MainWindow.ShowView(false, ViewType.PIDTuner);
}
if (GrblInfo.NumTools > 0)
{
MainWindow.EnableView(true, ViewType.Tools);
}
else
{
MainWindow.ShowView(false, ViewType.Tools);
}
MainWindow.EnableView(true, ViewType.Offsets);
MainWindow.EnableView(true, ViewType.GRBLConfig);
if (!string.IsNullOrEmpty(GrblInfo.TrinamicDrivers))
{
MainWindow.EnableView(true, ViewType.TrinamicTuner);
}
else
{
MainWindow.ShowView(false, ViewType.TrinamicTuner);
}
MainWindow.GCodePush += UserUI_GCodePush;
txtStatus.Text = "";
}
