protected virtual GCodeFile LoadGCodeFileFromDisk(string gcodeFilePath)
{
var parser = new GenericGCodeParser();
using var fileReader = File.OpenText(gcodeFilePath);
return(parser.Parse(fileReader));
}
static void LoadGeneratedGCodeFile(string sPath)
{
// read gcode file
GenericGCodeParser parser = new GenericGCodeParser();
GCodeFile gcode;
using (FileStream fs = new FileStream(sPath, FileMode.Open, FileAccess.Read)) {
using (TextReader reader = new StreamReader(fs)) {
gcode = parser.Parse(reader);
}
}
// write back out gcode we loaded
//StandardGCodeWriter writer = new StandardGCodeWriter();
//using ( StreamWriter w = new StreamWriter("../../../sample_output/writeback.gcode") ) {
// writer.WriteFile(gcode, w);
//}
GCodeToToolpaths converter = new GCodeToToolpaths();
MakerbotInterpreter interpreter = new MakerbotInterpreter();
interpreter.AddListener(converter);
InterpretArgs interpArgs = new InterpretArgs();
interpreter.Interpret(gcode, interpArgs);
View.SetPaths(converter.PathSet);
if (LastSettings != null)
{
View.PathDiameterMM = (float)LastSettings.Machine.NozzleDiamMM;
}
}
static DMesh3 GenerateTubeMeshesForGCode(string sPath, double pathWidth = 0.4)
{
GenericGCodeParser parser = new GenericGCodeParser();
GCodeFile gcode;
using (FileStream fs = new FileStream(sPath, FileMode.Open, FileAccess.Read)) {
using (TextReader reader = new StreamReader(fs)) {
gcode = parser.Parse(reader);
}
}
GCodeToLayerTubeMeshes make_tubes = new GCodeToLayerTubeMeshes()
{
TubeProfile = Polygon2d.MakeCircle(pathWidth / 2, 12),
InterpretZChangeAsLayerChange = false
};
make_tubes.WantTubeTypes.Add(ToolpathTypes.Travel);
ThreeAxisCNCInterpreter interpreter = new ThreeAxisCNCInterpreter();
interpreter.AddListener(make_tubes);
interpreter.Interpret(gcode, new InterpretArgs());
DMesh3 tubeMesh2 = make_tubes.GetCombinedMesh(1);
return(tubeMesh2);
}
public GCodeToolpath(string file, CartesianTarget referenceTarget, Vector3d alignment)
{
using var reader = File.OpenText(file);
var parser = new GenericGCodeParser();
var code = parser.Parse(reader);
Toolpath = new FiveAxisToRobots(referenceTarget, alignment, code);
_targets = Toolpath.Targets;
}
static DMesh3 GenerateTubeMeshesForGCode(string sPath)
{
GenericGCodeParser parser = new GenericGCodeParser();
GCodeFile gcode;
using (FileStream fs = new FileStream(sPath, FileMode.Open, FileAccess.Read)) {
using (TextReader reader = new StreamReader(fs)) {
gcode = parser.Parse(reader);
}
}
GCodeToLayerTubeMeshes make_tubes = new GCodeToLayerTubeMeshes()
{
TubeProfile = Polygon2d.MakeCircle(0.2f, 12)
};
MakerbotInterpreter interpreter = new MakerbotInterpreter();
interpreter.AddListener(make_tubes);
interpreter.Interpret(gcode, new InterpretArgs());
DMesh3 tubeMesh2 = make_tubes.GetCombinedMesh(1);
return(tubeMesh2);
}
static void LoadGCodeFile(string sPath)
{
GenericGCodeParser parser = new GenericGCodeParser();
GCodeFile gcode;
using (FileStream fs = new FileStream(sPath, FileMode.Open, FileAccess.Read)) {
using (TextReader reader = new StreamReader(fs)) {
gcode = parser.Parse(reader);
}
}
GCodeToToolpaths converter = new GCodeToToolpaths();
MakerbotInterpreter interpreter = new MakerbotInterpreter();
interpreter.AddListener(converter);
InterpretArgs interpArgs = new InterpretArgs();
interpreter.Interpret(gcode, interpArgs);
ToolpathSet Paths = converter.PathSet;
View.SetPaths(Paths);
}
static void PrintFile(PrinterControl simCtl)
{
//Console.Clear();
Console.WriteLine("\nDefault file will be used unless alternate file is given");
Console.WriteLine("Press any key to continue");
Console.ReadKey();
OpenFileDialog filePath = new OpenFileDialog();
string path = "";
if (filePath.ShowDialog() == DialogResult.OK)
{
path = filePath.FileName;
}
if (path == "")
{
path = "..\\..\\..\\SampleSTLs\\F-35_Corrected.gcode";
}
StreamReader file = new System.IO.StreamReader(path);
Stopwatch swTimer = new Stopwatch();
swTimer.Start();
// Parse the GCode file
var parser = new GenericGCodeParser();
var instructions = parser.Parse(file);
/*
* Commands to note:
* G28: Home all axes
* G28 X0: Home x axis
*
*
*/
double currentX = 0;
double currentY = 0;
double currentZ = 0;
bool isLaserOn = false;
bool oldIsLaserOn = false;
int instructionCount = 0;
foreach (var line in instructions.AllLines())
{
if (line.parameters != null)
{
//Console.WriteLine(line.code);
if (line.code == 1)
{
bool containsX = false;
bool containsY = false;
bool containsZ = false;
bool containsE = false;
foreach (var parameter in line.parameters)
{
if (parameter.identifier.ToUpper() == "X")
{
currentX = parameter.doubleValue;
containsX = true;
}
if (parameter.identifier.ToUpper() == "Y")
{
currentY = parameter.doubleValue;
containsY = true;
}
if (parameter.identifier.ToUpper() == "Z")
{
currentZ = parameter.doubleValue;
containsZ = true;
}
if (parameter.identifier.ToUpper() == "E")
{
isLaserOn = parameter.doubleValue > 0;
containsE = true;
}
}
// Command number: 0x00
// Format: X (4 bytes), Y (4 bytes)
if (containsX && containsY)
{
instructionCount++;
//continue;
var bytesToSend = new byte[12];
bytesToSend[0] = 0x00; // Command number
bytesToSend[1] = 0x08; // Data length
bytesToSend[2] = 0x00; // Blank (for checksum)
bytesToSend[3] = 0x00; // Blank (for checksum)
// Convert x position and y position to a byte array
var xBytes = BitConverter.GetBytes((float)currentX);
var yBytes = BitConverter.GetBytes((float)currentY);
// Insert x position
for (int i = 0; i < xBytes.Length; i++)
{
bytesToSend[i + 4] = xBytes[i];
}
// Insert y position
for (int i = 0; i < yBytes.Length; i++)
{
bytesToSend[i + 8] = yBytes[i];
}
// Send data
if (!HostToFirmware(bytesToSend, simCtl)) // NOTE: the first byte here is 8!!!!!!!!!!!!!=============
{
//Console.Write("retry");
Console.WriteLine("Print failed - command failed to send.");
return;
}
}
// Command number: 0x01
// Format: Z (4 bytes)
else if (containsZ)
{
instructionCount++;
//continue;
var bytesToSend = new byte[8];
bytesToSend[0] = 0x01; // Command number
bytesToSend[1] = 0x04; // Data length // changed from 04
bytesToSend[2] = 0x00; // Blank (for checksum)
bytesToSend[3] = 0x00; // Blank (for checksum)
// Convert z position to a byte array
var zBytes = BitConverter.GetBytes((float)currentZ);
// Insert z position
for (int i = 0; i < zBytes.Length; i++)
{
bytesToSend[i + 4] = zBytes[i];
}
// Send data
if (!HostToFirmware(bytesToSend, simCtl))
{
Console.WriteLine("Print failed - command failed to send.");
return;
}
}
else if (containsX || containsY)
{
throw new InvalidDataException("Invalid GCode command - command contains one X/Y command without the other.");
}
// Separately, if it contains an E
// Command number: 0x02
// Format: isLaserOn (1 byte)
if (containsE && (isLaserOn != oldIsLaserOn))
{
oldIsLaserOn = isLaserOn;
instructionCount++;
//continue;
var bytesToSend = new byte[8];
bytesToSend[0] = 0x02; // Command number
bytesToSend[1] = 0x01; // Data length
bytesToSend[2] = 0x00; // Blank (for checksum)
bytesToSend[3] = 0x00; // Blank (for checksum)
// Convert z position to a byte array
var isLaserOnBytes = BitConverter.GetBytes(isLaserOn);
// Insert isLaserOn
for (int i = 0; i < isLaserOnBytes.Length; i++)
{
bytesToSend[i + 4] = isLaserOnBytes[i];
}
// Send data
if (!HostToFirmware(bytesToSend, simCtl))
{
Console.WriteLine("Print failed - command failed to send.");
return;
}
}
}
}
}
Console.WriteLine("Host: There were " + instructionCount.ToString() + " instructions sent by the host.");
swTimer.Stop();
long elapsedMS = swTimer.ElapsedMilliseconds;
Console.WriteLine("Total Print Time: {0}", elapsedMS / 1000.0);
Console.WriteLine("Press any key to continue");
Console.ReadKey();
}