public override void LoadFromWagFile(string wagFilePath)
{
base.LoadFromWagFile(wagFilePath);
NormalizeParams();
if (DieselEngines == null)
{
DieselEngines = new DieselEngines(this);
}
if (DieselEngines.Count == 0)
{
DieselEngines.Add(new DieselEngine());
DieselEngines[0].InitFromMSTS(this);
DieselEngines[0].Initialize(true);
}
if (GearBox != null && GearBox.IsInitialized)
{
GearBox.CopyFromMSTSParams(DieselEngines[0]);
if (DieselEngines[0].GearBox == null)
{
DieselEngines[0].GearBox = GearBox;
DieselEngines[0].GearBox.UseLocoGearBox(DieselEngines[0]);
}
for (int i = 1; i < DieselEngines.Count; i++)
{
if (DieselEngines[i].GearBox == null)
{
DieselEngines[i].GearBox = new GearBox(GearBox, DieselEngines[i]);
}
}
if (GearBoxController == null)
{
GearBoxController = new MSTSNotchController(GearBox.NumOfGears + 1);
}
}
InitialMassKg = MassKG;
}
public override void LoadFromWagFile(string wagFilePath)
{
base.LoadFromWagFile(wagFilePath);
if (Simulator.Settings.VerboseConfigurationMessages) // Display locomotivve name for verbose error messaging
{
Trace.TraceInformation("\n\n ================================================= {0} =================================================", LocomotiveName);
}
NormalizeParams();
// Check to see if Speed of Max Tractive Force has been set - use ORTS value as first priority, if not use MSTS, last resort use an arbitary value.
if (SpeedOfMaxContinuousForceMpS == 0)
{
if (MSTSSpeedOfMaxContinuousForceMpS != 0)
{
SpeedOfMaxContinuousForceMpS = MSTSSpeedOfMaxContinuousForceMpS; // Use MSTS value if present
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("Speed Of Max Continuous Force: set to default value {0}", FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
}
else if (MaxPowerW != 0 && MaxContinuousForceN != 0)
{
SpeedOfMaxContinuousForceMpS = MaxPowerW / MaxContinuousForceN;
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("Speed Of Max Continuous Force: set to 'calculated' value {0}", FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
}
else
{
SpeedOfMaxContinuousForceMpS = 10.0f; // If not defined then set at an "arbitary" value of 22mph
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("Speed Of Max Continuous Force: set to 'arbitary' value {0}", FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
}
}
if (DieselEngines == null)
{
DieselEngines = new DieselEngines(this);
}
// Create a diesel engine block if none exits, typically for a MSTS or BASIC configuration
if (DieselEngines.Count == 0)
{
DieselEngines.Add(new DieselEngine());
DieselEngines[0].InitFromMSTS(this);
DieselEngines[0].Initialize(true);
}
// Check initialization of power values for diesel engines
for (int i = 0; i < DieselEngines.Count; i++)
{
DieselEngines[i].InitDieselRailPowers(this);
}
if (GearBox != null && GearBox.IsInitialized)
{
GearBox.CopyFromMSTSParams(DieselEngines[0]);
if (DieselEngines[0].GearBox == null)
{
DieselEngines[0].GearBox = GearBox;
DieselEngines[0].GearBox.UseLocoGearBox(DieselEngines[0]);
}
for (int i = 1; i < DieselEngines.Count; i++)
{
if (DieselEngines[i].GearBox == null)
{
DieselEngines[i].GearBox = new GearBox(GearBox, DieselEngines[i]);
}
}
if (GearBoxController == null)
{
GearBoxController = new MSTSNotchController(GearBox.NumOfGears + 1);
}
}
InitialMassKg = MassKG;
// If traction force curves not set (BASIC configuration) then check that power values are set, otherwise locomotive will not move.
if (TractiveForceCurves == null && LocomotiveMaxRailOutputPowerW == 0)
{
if (MaxPowerW != 0)
{
LocomotiveMaxRailOutputPowerW = MaxPowerW; // Set to default power value
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("MaxRailOutputPower (BASIC Config): set to default value = {0}", FormatStrings.FormatPower(LocomotiveMaxRailOutputPowerW, IsMetric, false, false));
}
}
else
{
LocomotiveMaxRailOutputPowerW = 2500000.0f; // If no default value then set to arbitary value
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("MaxRailOutputPower (BASIC Config): set at arbitary value = {0}", FormatStrings.FormatPower(LocomotiveMaxRailOutputPowerW, IsMetric, false, false));
}
}
if (MaximumDieselEnginePowerW == 0)
{
MaximumDieselEnginePowerW = LocomotiveMaxRailOutputPowerW; // If no value set in ENG file, then set the Prime Mover power to same as RailOutputPower (typically the MaxPower value)
if (Simulator.Settings.VerboseConfigurationMessages)
{
Trace.TraceInformation("Maximum Diesel Engine Prime Mover Power set the same as MaxRailOutputPower {0} value", FormatStrings.FormatPower(MaximumDieselEnginePowerW, IsMetric, false, false));
}
}
}
// Check force assumptions set for diesel
if (Simulator.Settings.VerboseConfigurationMessages)
{
float ThrottleSetting = 1.0f; // Must be at full throttle for these calculations
if (TractiveForceCurves == null) // Basic configuration - ie no force and Power tables, etc
{
float CalculatedMaxContinuousForceN = ThrottleSetting * LocomotiveMaxRailOutputPowerW / SpeedOfMaxContinuousForceMpS;
Trace.TraceInformation("Diesel Force Settings (BASIC Config): Max Starting Force {0}, Calculated Max Continuous Force {1} @ speed of {2}", FormatStrings.FormatForce(MaxForceN, IsMetric), FormatStrings.FormatForce(CalculatedMaxContinuousForceN, IsMetric), FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
Trace.TraceInformation("Diesel Power Settings (BASIC Config): Prime Mover {0}, Max Rail Output Power {1}", FormatStrings.FormatPower(MaximumDieselEnginePowerW, IsMetric, false, false), FormatStrings.FormatPower(LocomotiveMaxRailOutputPowerW, IsMetric, false, false));
if (MaxForceN < MaxContinuousForceN)
{
Trace.TraceInformation("!!!! Warning: Starting Tractive force {0} is less then Calculated Continuous force {1}, please check !!!!", FormatStrings.FormatForce(MaxForceN, IsMetric), FormatStrings.FormatForce(CalculatedMaxContinuousForceN, IsMetric), FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
}
else // Advanced configuration -
{
float StartingSpeedMpS = 0.1f; // Assumed starting speed for diesel - can't be zero otherwise error will occurr
float StartingForceN = (float)TractiveForceCurves.Get(ThrottleSetting, StartingSpeedMpS);
float CalculatedMaxContinuousForceN = (float)TractiveForceCurves.Get(ThrottleSetting, SpeedOfMaxContinuousForceMpS);
Trace.TraceInformation("Diesel Force Settings (ADVANCED Config): Max Starting Force {0} Calculated Max Continuous Force {1}, @ speed of {2}", FormatStrings.FormatForce(StartingForceN, IsMetric), FormatStrings.FormatForce(CalculatedMaxContinuousForceN, IsMetric), FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
Trace.TraceInformation("Diesel Power Settings (ADVANCED Config): Prime Mover {0}, Max Rail Output Power {1} @ {2} rpm", FormatStrings.FormatPower(DieselEngines.MaxPowerW, IsMetric, false, false), FormatStrings.FormatPower(DieselEngines.MaximumRailOutputPowerW, IsMetric, false, false), MaxRPM);
if (StartingForceN < MaxContinuousForceN)
{
Trace.TraceInformation("!!!! Warning: Calculated Starting Tractive force {0} is less then Calculated Continuous force {1}, please check !!!!", FormatStrings.FormatForce(StartingForceN, IsMetric), FormatStrings.FormatForce(CalculatedMaxContinuousForceN, IsMetric), FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
}
// Check that MaxPower value is realistic - Calculate power - metric - P = F x V
float CalculatedContinuousPowerW = MaxContinuousForceN * SpeedOfMaxContinuousForceMpS;
if (MaxPowerW < CalculatedContinuousPowerW)
{
Trace.TraceInformation("!!!! Warning: MaxPower {0} is less then continuous force calculated power {1} @ speed of {2}, please check !!!!", FormatStrings.FormatPower(MaxPowerW, IsMetric, false, false), FormatStrings.FormatPower(CalculatedContinuousPowerW, IsMetric, false, false), FormatStrings.FormatSpeedDisplay(SpeedOfMaxContinuousForceMpS, IsMetric));
}
Trace.TraceInformation("===================================================================================================================\n\n");
}
}