/// <summary>
/// Use this to create nodes via coding while in editor mode. Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates.
/// </summary>
/// <param name="RS">The road system to create nodes on.</param>
/// <param name="NodeLocation">The location of the newly created node.</param>
/// <returns></returns>
public static GSDSplineN CreateNode_Programmatically(GSDRoad tRoad, Vector3 NodeLocation)
{
int SplineChildCount = tRoad.GSDSpline.transform.childCount;
GameObject tNodeObj = new GameObject("Node" + (SplineChildCount + 1).ToString());
GSDSplineN tNode = tNodeObj.AddComponent <GSDSplineN>(); //Add the node component.
//Set node location:
if (NodeLocation.y < 0.03f)
{
NodeLocation.y = 0.03f;
} //Make sure it doesn't try to create a node below 0 height.
tNodeObj.transform.position = NodeLocation;
//Set the node's parent:
tNodeObj.transform.parent = tRoad.GSDSplineObj.transform;
//Set the idOnSpline:
tNode.idOnSpline = (SplineChildCount + 1);
tNode.GSDSpline = tRoad.GSDSpline;
//Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates
tRoad.UpdateRoad();
return(tNode);
}
public static void UpdateAllRoads()
{
GSDRoad[] tRoadObjs = (GSDRoad[])GameObject.FindObjectsOfType(typeof(GSDRoad));
int RoadCount = tRoadObjs.Length;
GSDRoad tRoad = null;
GSDSplineC[] tPiggys = null;
if (RoadCount > 1)
{
tPiggys = new GSDSplineC[RoadCount - 1];
}
for (int h = 0; h < RoadCount; h++)
{
tRoad = tRoadObjs[h];
if (h > 0)
{
tPiggys[h - 1] = tRoad.GSDSpline;
}
}
tRoad = tRoadObjs[0];
if (tPiggys != null && tPiggys.Length > 0)
{
tRoad.PiggyBacks = tPiggys;
}
tRoad.UpdateRoad();
}
public static void UpdateAllRoads()
{
GSDRoad[] allRoadObjects = (GSDRoad[])GameObject.FindObjectsOfType(typeof(GSDRoad));
int roadCount = allRoadObjects.Length;
GSDRoad singleRoad = null;
GSDSplineC[] tPiggys = null;
if (roadCount > 1)
{
tPiggys = new GSDSplineC[roadCount - 1];
}
for (int count = 0; count < roadCount; count++)
{
singleRoad = allRoadObjects[count];
if (count > 0)
{
tPiggys[count - 1] = singleRoad.GSDSpline;
}
}
singleRoad = allRoadObjects[0];
if (tPiggys != null && tPiggys.Length > 0)
{
singleRoad.PiggyBacks = tPiggys;
}
singleRoad.UpdateRoad();
}
public void UpdateAllRoads()
{
GSDRoad[] tRoadObjs = GetComponentsInChildren <GSDRoad>();
// int i=0;
int RoadCount = tRoadObjs.Length;
GSDRoad tRoad = null;
GSDSplineC[] tPiggys = null;
if (RoadCount > 1)
{
tPiggys = new GSDSplineC[RoadCount];
for (int h = 0; h < RoadCount; h++)
{
tRoad = tRoadObjs[h];
tPiggys[h] = tRoad.GSDSpline;
}
}
tRoad = tRoadObjs[0];
if (tPiggys != null && tPiggys.Length > 0)
{
tRoad.PiggyBacks = tPiggys;
}
tRoad.UpdateRoad();
}
public static GSDSplineN CreateNode(GSDRoad RS, bool bSpecialEndNode = false, Vector3 vSpecialLoc = default(Vector3), bool bInterNode = false){
Object[] tWorldNodeCount = GameObject.FindObjectsOfType(typeof(GSDSplineN));
GameObject tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString());
if(!bInterNode){
UnityEditor.Undo.RegisterCreatedObjectUndo(tNodeObj, "Created node");
}
GSDSplineN tNode = tNodeObj.AddComponent<GSDSplineN>();
if(bSpecialEndNode){
tNode.bSpecialEndNode = true;
tNodeObj.transform.position = vSpecialLoc;
}else{
tNodeObj.transform.position = RS.Editor_MousePos;
//This helps prevent double clicks:
int mCount = RS.GSDSpline.GetNodeCount();
for(int i=0;i<mCount;i++){
if(Vector3.Distance(RS.Editor_MousePos,RS.GSDSpline.mNodes[i].pos) < 5f){
Object.DestroyImmediate(tNodeObj);
return null;
}
}
//End double click prevention
}
Vector3 xVect = tNodeObj.transform.position;
if(xVect.y < 0.03f){ xVect.y = 0.03f; }
tNodeObj.transform.position = xVect;
tNodeObj.transform.parent = RS.GSDSplineObj.transform;
tNode.idOnSpline = RS.GSDSpline.GetNodeCount()+1;
tNode.GSDSpline = RS.GSDSpline;
//Enforce max road grade:
if(RS.opt_bMaxGradeEnabled && !bSpecialEndNode){
tNode.EnsureGradeValidity(-1,true);
}
if(!bInterNode && !bSpecialEndNode){
RS.UpdateRoad();
}
return tNode;
}
/// <summary>
/// Use this to create nodes via coding while in editor mode. Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates.
/// </summary>
/// <param name="RS">The road system to create nodes on.</param>
/// <param name="NodeLocation">The location of the newly created node.</param>
/// <returns></returns>
public static GSDSplineN CreateNode_Programmatically(GSDRoad tRoad, Vector3 NodeLocation) {
int SplineChildCount = tRoad.GSDSpline.transform.childCount;
GameObject tNodeObj = new GameObject("Node" + (SplineChildCount+1).ToString());
GSDSplineN tNode = tNodeObj.AddComponent<GSDSplineN>(); //Add the node component.
//Set node location:
if (NodeLocation.y < 0.03f) { NodeLocation.y = 0.03f; } //Make sure it doesn't try to create a node below 0 height.
tNodeObj.transform.position = NodeLocation;
//Set the node's parent:
tNodeObj.transform.parent = tRoad.GSDSplineObj.transform;
//Set the idOnSpline:
tNode.idOnSpline = (SplineChildCount + 1);
tNode.GSDSpline = tRoad.GSDSpline;
//Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates
tRoad.UpdateRoad();
return tNode;
}
/// <summary>
/// Use this to insert nodes via coding while in editor mode. Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates.
/// </summary>
/// <param name="RS">The road system to insert nodes in.</param>
/// <param name="NodeLocation">The location of the newly inserted node.</param>
/// <returns></returns>
public static GSDSplineN InsertNode_Programmatically(GSDRoad RS, Vector3 NodeLocation){
GameObject tNodeObj;
Object[] tWorldNodeCount = GameObject.FindObjectsOfType(typeof(GSDSplineN));
tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString());
//Set node location:
if (NodeLocation.y < 0.03f) { NodeLocation.y = 0.03f; } //Make sure it doesn't try to create a node below 0 height.
tNodeObj.transform.position = NodeLocation;
//Set the node's parent:
tNodeObj.transform.parent = RS.GSDSplineObj.transform;
int cCount = RS.GSDSpline.mNodes.Count;
//Get the closet param on spline:
float tParam = RS.GSDSpline.GetClosestParam(NodeLocation, false, true);
bool bEndInsert = false;
bool bZeroInsert = false;
int iStart = 0;
if(GSDRootUtil.IsApproximately(tParam,0f,0.0001f)){
bZeroInsert = true;
iStart = 0;
} else if (GSDRootUtil.IsApproximately(tParam, 1f, 0.0001f)) {
//Inserted at end, switch to create node instead:
Object.DestroyImmediate(tNodeObj);
return CreateNode_Programmatically(RS, NodeLocation);
}
//Figure out where to insert the node:
for(int i=0;i<cCount;i++){
GSDSplineN xNode = RS.GSDSpline.mNodes[i];
if(!bZeroInsert && !bEndInsert){
if(tParam > xNode.tTime){
iStart = xNode.idOnSpline+1;
}
}
}
for(int i=iStart;i<cCount;i++){
RS.GSDSpline.mNodes[i].idOnSpline+=1;
}
GSDSplineN tNode = tNodeObj.AddComponent<GSDSplineN>();
tNode.GSDSpline = RS.GSDSpline;
tNode.idOnSpline = iStart;
tNode.pos = NodeLocation;
RS.GSDSpline.mNodes.Insert(iStart,tNode);
//Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates
RS.UpdateRoad();
return tNode;
}
//Insert
//Detect closest node (if end node, auto select other node)
//Determine which node is closest (up or down) on spline
//Place node, adjust all id on splines
//Setup spline
public static GSDSplineN InsertNode(GSDRoad RS, bool bForcedLoc = false, Vector3 ForcedLoc = default(Vector3), bool bIsPreNode = false, int InsertIndex = -1, bool bSpecialEndNode = false, bool bInterNode = false){
GameObject tNodeObj;
Object[] tWorldNodeCount = GameObject.FindObjectsOfType(typeof(GSDSplineN));
if(!bForcedLoc){
tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString());
}else if(bForcedLoc && !bSpecialEndNode){
tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString() + "Ignore");
}else{
tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString());
}
if(!bInterNode){
UnityEditor.Undo.RegisterCreatedObjectUndo(tNodeObj, "Inserted node");
}
if(!bForcedLoc){
tNodeObj.transform.position = RS.Editor_MousePos;
//This helps prevent double clicks:
int mCount = RS.GSDSpline.GetNodeCount();
for(int i=0;i<mCount;i++){
if(Vector3.Distance(RS.Editor_MousePos,RS.GSDSpline.mNodes[i].pos) < 15f){
Object.DestroyImmediate(tNodeObj);
return null;
}
}
//End double click prevention
}else{
tNodeObj.transform.position = ForcedLoc;
}
Vector3 xVect = tNodeObj.transform.position;
if(xVect.y < 0.03f){ xVect.y = 0.03f; }
tNodeObj.transform.position = xVect;
tNodeObj.transform.parent = RS.GSDSplineObj.transform;
int cCount = RS.GSDSpline.mNodes.Count;
// float mDistance = 50000f;
// float tDistance = 0f;
float tParam;
if(!bForcedLoc){
tParam = RS.GSDSpline.GetClosestParam(RS.Editor_MousePos,false,true);
}else{
tParam = RS.GSDSpline.GetClosestParam(ForcedLoc,false,true);
}
bool bEndInsert = false;
bool bZeroInsert = false;
int iStart = 0;
if (GSDRootUtil.IsApproximately(tParam, 0f, 0.0001f)) {
bZeroInsert = true;
iStart = 0;
} else if (GSDRootUtil.IsApproximately(tParam, 1f, 0.0001f)) {
bEndInsert = true;
}
if(bForcedLoc){
iStart = InsertIndex;
}else{
for(int i=0;i<cCount;i++){
GSDSplineN xNode = RS.GSDSpline.mNodes[i];
if(!bZeroInsert && !bEndInsert){
if(tParam > xNode.tTime){
iStart = xNode.idOnSpline+1;
}
}
}
}
if(bEndInsert){
iStart = RS.GSDSpline.mNodes.Count;
}else{
for(int i=iStart;i<cCount;i++){
RS.GSDSpline.mNodes[i].idOnSpline+=1;
}
}
GSDSplineN tNode = tNodeObj.AddComponent<GSDSplineN>();
if(bForcedLoc && !bSpecialEndNode){
tNode.bIsBridge = true;
tNode.bIgnore = true;
// tNode.bIsBridge_PreNode = bIsPreNode;
// tNode.bIsBridge_PostNode = !bIsPreNode;
}
tNode.GSDSpline = RS.GSDSpline;
tNode.idOnSpline = iStart;
tNode.bSpecialEndNode = bSpecialEndNode;
if(!bForcedLoc){
tNode.pos = RS.Editor_MousePos;
}else{
tNode.pos = ForcedLoc;
}
RS.GSDSpline.mNodes.Insert(iStart,tNode);
//Enforce maximum road grade:
if(!bForcedLoc && !bSpecialEndNode && RS.opt_bMaxGradeEnabled){
tNode.EnsureGradeValidity(iStart);
}
if(!bInterNode && !bSpecialEndNode){
if(!bForcedLoc){
RS.UpdateRoad();
}
}
return tNode;
}
/// <summary>
/// Use this to insert nodes via coding while in editor mode. Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates.
/// </summary>
/// <param name="RS">The road system to insert nodes in.</param>
/// <param name="NodeLocation">The location of the newly inserted node.</param>
/// <returns></returns>
public static GSDSplineN InsertNode_Programmatically(GSDRoad RS, Vector3 NodeLocation)
{
GameObject tNodeObj;
Object[] tWorldNodeCount = GameObject.FindObjectsOfType(typeof(GSDSplineN));
tNodeObj = new GameObject("Node" + tWorldNodeCount.Length.ToString());
//Set node location:
if (NodeLocation.y < 0.03f)
{
NodeLocation.y = 0.03f;
} //Make sure it doesn't try to create a node below 0 height.
tNodeObj.transform.position = NodeLocation;
//Set the node's parent:
tNodeObj.transform.parent = RS.GSDSplineObj.transform;
int cCount = RS.GSDSpline.mNodes.Count;
//Get the closet param on spline:
float tParam = RS.GSDSpline.GetClosestParam(NodeLocation, false, true);
bool bEndInsert = false;
bool bZeroInsert = false;
int iStart = 0;
if (GSDRootUtil.IsApproximately(tParam, 0f, 0.0001f))
{
bZeroInsert = true;
iStart = 0;
}
else if (GSDRootUtil.IsApproximately(tParam, 1f, 0.0001f))
{
//Inserted at end, switch to create node instead:
Object.DestroyImmediate(tNodeObj);
return(CreateNode_Programmatically(RS, NodeLocation));
}
//Figure out where to insert the node:
for (int i = 0; i < cCount; i++)
{
GSDSplineN xNode = RS.GSDSpline.mNodes[i];
if (!bZeroInsert && !bEndInsert)
{
if (tParam > xNode.tTime)
{
iStart = xNode.idOnSpline + 1;
}
}
}
for (int i = iStart; i < cCount; i++)
{
RS.GSDSpline.mNodes[i].idOnSpline += 1;
}
GSDSplineN tNode = tNodeObj.AddComponent <GSDSplineN>();
tNode.GSDSpline = RS.GSDSpline;
tNode.idOnSpline = iStart;
tNode.pos = NodeLocation;
RS.GSDSpline.mNodes.Insert(iStart, tNode);
//Make sure opt_bAllowRoadUpdates is set to false in RS.GSDRS.opt_bAllowRoadUpdates
RS.UpdateRoad();
return(tNode);
}