/// <summary>
/// 4个天线读卡, 读取EPC数据区以及TID数据区
/// </summary>
/// <param name="clientConn">连接</param>
private static void SendSynBaseInventoryEpcMsg(GClient clientConn, out bool isGetSuccess)
{
// 4个天线读卡, 读取EPC数据区以及TID数据区
MsgBaseInventoryEpc msgBaseInventoryEpc = new MsgBaseInventoryEpc
{
AntennaEnable = (eAntennaNo._1 | eAntennaNo._2 | eAntennaNo._3 | eAntennaNo._4),
InventoryMode = (byte)eInventoryMode.Single,
// tid参数
ReadTid = new ParamEpcReadTid()
};
msgBaseInventoryEpc.ReadTid.Mode = (byte)eParamTidMode.Auto;
msgBaseInventoryEpc.ReadTid.Len = 6;
clientConn.SendSynMsg(msgBaseInventoryEpc);
if (0 == msgBaseInventoryEpc.RtCode)
{
isGetSuccess = true;
LogUtils.Debug("Inventory epc successful.");
}
else
{
LogUtils.Debug("Inventory epc error.");
isGetSuccess = false;
}
}
/// <summary>
/// 功率配置, 将4个天线功率都设置为30dBm.
/// </summary>
/// <param name="clientConn">连接</param>
private static void SendSynBaseSetPowerMsg(GClient clientConn, out bool isGetSuccess)
{
// 功率配置, 将4个天线功率都设置为30dBm.
MsgBaseSetPower msgBaseSetPower = new MsgBaseSetPower
{
DicPower = new Dictionary <byte, byte>()
{
{ 1, 30 },
{ 2, 30 },
{ 3, 30 },
{ 4, 30 }
}
};
clientConn.SendSynMsg(msgBaseSetPower);
if (0 == msgBaseSetPower.RtCode)
{
LogUtils.Debug("Power configuration successful.");
isGetSuccess = true;
}
else
{
LogUtils.Debug("Power configuration error.");
isGetSuccess = false;
}
}
/// <summary>
/// 停止指令，空闲态(当读写器处于读卡状态时，所有配置消息将无法发送，必须发送停止指令)
/// </summary>
/// <param name="clientConn">连接</param>
private static void SendSynBaseStopMsg(GClient clientConn, out bool isGetSuccess)
{
// 停止指令，空闲态
MsgBaseStop msgBaseStop = new MsgBaseStop();
clientConn.SendSynMsg(msgBaseStop);
if (0 == msgBaseStop.RtCode)
{
isGetSuccess = true;
LogUtils.Debug("Stop successful.");
}
else
{
LogUtils.Debug("Stop error.");
isGetSuccess = false;
}
}
public static void TestRFID(object sender, ElapsedEventArgs elapsed)
{
GClient clientConn = new GClient();
//COM1 主柜rfid串口
//COM4 副柜rfid串口
if (clientConn.OpenSerial("COM1:115200", 3000, out eConnectionAttemptEventStatusType status))
//if (clientConn.OpenTcp("192.168.1.168:8160", 3000, out status))
{
// 订阅标签上报事件
clientConn.OnEncapedTagEpcLog += new delegateEncapedTagEpcLog(OnEncapedTagEpcLog);
clientConn.OnEncapedTagEpcOver += new delegateEncapedTagEpcOver(OnEncapedTagEpcOver);
// 停止指令，空闲态
MsgBaseStop msgBaseStop = new MsgBaseStop();
clientConn.SendSynMsg(msgBaseStop);
if (0 == msgBaseStop.RtCode)
{
LogUtils.Debug("Stop successful.");
}
else
{
LogUtils.Debug("Stop error.");
}
// 功率配置, 将4个天线功率都设置为30dBm.
MsgBaseSetPower msgBaseSetPower = new MsgBaseSetPower
{
DicPower = new Dictionary <byte, byte>()
{
{ 1, 30 },
{ 2, 30 },
{ 3, 30 },
{ 4, 30 }
}
};
clientConn.SendSynMsg(msgBaseSetPower);
if (0 == msgBaseSetPower.RtCode)
{
LogUtils.Debug("Power configuration successful.");
}
else
{
LogUtils.Debug("Power configuration error.");
}
LogUtils.Debug("Enter any character to start reading the tag.");
Console.ReadKey();
// 4个天线读卡, 读取EPC数据区以及TID数据区
MsgBaseInventoryEpc msgBaseInventoryEpc = new MsgBaseInventoryEpc
{
AntennaEnable = (uint)(eAntennaNo._1 | eAntennaNo._2 | eAntennaNo._3 | eAntennaNo._4),
InventoryMode = (byte)eInventoryMode.Inventory,
// tid参数
ReadTid = new ParamEpcReadTid()
};
msgBaseInventoryEpc.ReadTid.Mode = (byte)eParamTidMode.Auto;
msgBaseInventoryEpc.ReadTid.Len = 6;
clientConn.SendSynMsg(msgBaseInventoryEpc);
if (0 == msgBaseInventoryEpc.RtCode)
{
LogUtils.Debug("Inventory epc successful.");
}
else
{
LogUtils.Debug("Inventory epc error.");
}
Console.ReadKey();
// 停止读卡，空闲态
clientConn.SendSynMsg(msgBaseStop);
if (0 == msgBaseStop.RtCode)
{
LogUtils.Debug("Stop successful.");
}
else
{
LogUtils.Debug("Stop error.");
}
}
else
{
LogUtils.Debug("Connect failure.");
}
Console.ReadKey();
clientConn.Close();
}