private static void CreateFilledRegion(Document doc, SpatialObjectWrapper so)
{
try
{
var filledRegionType = new FilteredElementCollector(doc).OfClass(typeof(FilledRegionType)).FirstElementId();
if (filledRegionType == null || filledRegionType == ElementId.InvalidElementId)
{
return;
}
var curves = new List <CurveLoop>();
var loop = new CurveLoop();
foreach (var curve in so.Room2D.FloorBoundary.GetCurves(so.Level.Elevation))
{
//doc.Create.NewDetailCurve(doc.ActiveView, curve);
loop.Append(curve);
}
curves.Add(loop);
FilledRegion.Create(doc, filledRegionType, doc.ActiveView.Id, curves);
}
catch (Exception e)
{
_logger.Fatal(e);
}
}
public LoadArea(FilledRegion filledRegion, Options options)
{
try
{
FilledRegion = filledRegion;
ElementId = filledRegion.Id;
Load = double.Parse(filledRegion.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS).AsString(), CultureInfo.InvariantCulture);
//Create a new solid from the element solid
Face face = ir.GetFace(filledRegion, options);
IList <XYZ> source = new List <XYZ>();
foreach (CurveLoop curveLoop in face.GetEdgesAsCurveLoops())
{
foreach (Curve curve in curveLoop)
{
source.Add(curve.GetEndPoint(0));
source.Add(curve.GetEndPoint(1));
}
}
source = source.DistinctBy(xyz => new { X = xyz.X.Round4(), Y = xyz.Y.Round4() }).ToList();
source = tr.ConvexHull(source.ToList());
Path = ir.CreatePath(source);
}
catch (Exception e)
{
Console.WriteLine(e);
throw new Exception(e.Message);
}
}
public void CreateFilledRegion(Document doc, ViewSection intElev, BoundingBoxXYZ roombb)
{
List <CurveLoop> filledRegionBoundaries = FilledRegionBoundary(intElev);
ElementId filledRegionTypeId = new FilteredElementCollector(doc)
.OfClass(typeof(FilledRegionType))
.Select(f => f as FilledRegionType)
.Where(f => f != null &&
f.BackgroundPatternColor.Red == 255 &&
f.BackgroundPatternColor.Blue == 255 &&
f.BackgroundPatternColor.Green == 255 &&
f.IsMasking == true)
.Select(f => f.Id)
.FirstOrDefault();
FilledRegion region = FilledRegion.Create(doc, filledRegionTypeId, intElev.Id, filledRegionBoundaries);
// set inside and outside lineweight
Element lineStyle = FilledRegion.GetValidLineStyleIdsForFilledRegion(doc)
.Select(id => doc.GetElement(id))
.Where(el => el.Name.Contains("05") && el.Name.ToLower().Contains("solid"))
.FirstOrDefault();
region.SetLineStyleId(lineStyle.Id);
}
List <XYZ> GetBoundaryCorners(FilledRegion region)
{
List <XYZ> result = new List <XYZ>();
ElementId id = new ElementId(
region.Id.IntegerValue - 1);
Sketch sketch = region.Document.GetElement(
id) as Sketch;
if (null != sketch)
{
CurveArray curves = sketch.Profile.get_Item(0);
if (null != curves)
{
foreach (Curve cur in curves)
{
XYZ corner = cur.GetEndPoint(0);
result.Add(corner);
}
}
}
return(result);
}
List<XYZ> GetBoundaryCorners( FilledRegion region )
{
List<XYZ> result = new List<XYZ>();
ElementId id = new ElementId(
region.Id.IntegerValue - 1 );
Sketch sketch = region.Document.GetElement(
id ) as Sketch;
if( null != sketch )
{
CurveArray curves = sketch.Profile.get_Item( 0 );
if( null != curves )
{
foreach( Curve cur in curves )
{
XYZ corner = cur.GetEndPoint( 0 );
result.Add( corner );
}
}
}
return result;
}
/// <summary>
/// Gets all the line styles in the document
/// </summary>
/// <param name="doc">UI Document</param>
/// <returns>List of line styles</returns>
public List <Element> GetLineStyles(Document doc)
{
List <Element> lineStyleList = FilledRegion.GetValidLineStyleIdsForFilledRegion(doc)
.Select(id => doc.GetElement(id))
.ToList();
return(lineStyleList);
}
/// <summary>
/// Creates a filled region for the elevatin using the previously found boundaries
/// and the user selected filled region type and line style
/// </summary>
/// <param name="doc">UI Document</param>
/// <param name="intElev">Interior Elevation</param>
/// <param name="filledRegionId">Id of user selected filled region</param>
/// <param name="lineStyle">Id of user selected line style</param>
public void CreateFilledRegion(Document doc, ViewSection intElev, ElementId filledRegionId, ElementId lineStyle)
{
List <CurveLoop> filledRegionBoundaries = FilledRegionBoundary(intElev);
FilledRegion region = FilledRegion.Create(doc, filledRegionId, intElev.Id, filledRegionBoundaries);
region.SetLineStyleId(lineStyle);
}
/***************************************************/
public static IBHoMObject FromRevit(this FilledRegion filledRegion, Discipline discipline, Transform transform = null, RevitSettings settings = null, Dictionary <string, List <IBHoMObject> > refObjects = null)
{
switch (discipline)
{
default:
return(filledRegion.DraftingInstanceFromRevit(settings, refObjects));
}
}
/***************************************************/
/**** Public Methods ****/
/***************************************************/
public static DraftingInstance DraftingInstanceFromRevit(this FilledRegion filledRegion, RevitSettings settings = null, Dictionary <string, List <IBHoMObject> > refObjects = null)
{
settings = settings.DefaultIfNull();
DraftingInstance draftingInstance = refObjects.GetValue <DraftingInstance>(filledRegion.Id);
if (draftingInstance != null)
{
return(draftingInstance);
}
View view = filledRegion.Document.GetElement(filledRegion.OwnerViewId) as View;
if (view == null)
{
return(null);
}
InstanceProperties instanceProperties = (filledRegion.Document.GetElement(filledRegion.GetTypeId()) as ElementType).InstancePropertiesFromRevit(settings, refObjects) as InstanceProperties;
List <ICurve> curves = new List <oM.Geometry.ICurve>();
foreach (CurveLoop loop in filledRegion.GetBoundaries())
{
curves.Add(loop.FromRevit());
}
List <PlanarSurface> surfaces = BH.Engine.Geometry.Create.PlanarSurface(curves);
if (surfaces.Count == 1)
{
draftingInstance = new DraftingInstance {
Properties = instanceProperties, ViewName = view.Name, Location = surfaces[0]
}
}
;
else
{
draftingInstance = new DraftingInstance {
Properties = instanceProperties, ViewName = view.Name, Location = new PolySurface {
Surfaces = surfaces.Cast <ISurface>().ToList()
}
}
};
draftingInstance.Name = filledRegion.Name;
//Set identifiers, parameters & custom data
draftingInstance.SetIdentifiers(filledRegion);
draftingInstance.CopyParameters(filledRegion, settings.ParameterSettings);
draftingInstance.SetProperties(filledRegion, settings.ParameterSettings);
refObjects.AddOrReplace(filledRegion.Id, draftingInstance);
return(draftingInstance);
}
/***************************************************/
}
private void DrawNormSpecGraph()
{
LinePlot lpTemp = new LinePlot();
plotTemplateSpectrum.Clear();
// add masks;
int num = lbRanges.SelectedIndex;
for (int i = 0; i < cutMask.Size(); i++)
{
NPlot.VerticalLine vl1 = new VerticalLine(this.cutMask.GetLeftBound(i));
NPlot.VerticalLine vl2 = new VerticalLine(this.cutMask.GetRightBound(i));
NPlot.FilledRegion fr = new FilledRegion(vl1, vl2);
fr.Brush = Brushes.Coral;
if (num == i)
{
fr.Brush = Brushes.Aqua;
}
plotTemplateSpectrum.Add(fr);
}
// add normalized observed spectrum;
if (this.normSpectrum != null)
{
LinePlot lpObsNorm = new LinePlot();
lpObsNorm.Color = Color.Red;
lpObsNorm.AbscissaData = this.normSpectrum.LambdaSet;
lpObsNorm.OrdinateData = this.normSpectrum.FluxSet;
plotTemplateSpectrum.Add(lpObsNorm);
}
// add normalized template spectrum;
if (this.temCutSpectrum != null)
{
lpTemp.Color = Color.Blue;
lpTemp.AbscissaData = this.temCutSpectrum.LambdaSet;
lpTemp.OrdinateData = this.temCutSpectrum.FluxSet;
plotTemplateSpectrum.Add(lpTemp);
}
// add horizontal line;
NPlot.HorizontalLine hl = new HorizontalLine(1.0, Color.DarkGray);
plotTemplateSpectrum.Add(hl);
plotTemplateSpectrum.XAxis1.WorldMax = this.cropLambdaMax;
plotTemplateSpectrum.XAxis1.WorldMin = this.cropLambdaMin;
plotTemplateSpectrum.Title = "Normalized spectrum";
plotTemplateSpectrum.YAxis1.Label = "Norm. Flux";
plotTemplateSpectrum.XAxis1.Label = "Wavelength";
plotTemplateSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.HorizontalDrag());
plotTemplateSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.VerticalDrag());
plotTemplateSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.AxisDrag(true));
plotTemplateSpectrum.Refresh();
}
private void DrawObsSpecGraph()
{
plotObsSpectrum.Clear();
// add masks;
int num = lbRanges.SelectedIndex;
for (int i = 0; i < cutMask.Size(); i++)
{
NPlot.VerticalLine vl1 = new VerticalLine(this.cutMask.GetLeftBound(i));
NPlot.VerticalLine vl2 = new VerticalLine(this.cutMask.GetRightBound(i));
NPlot.FilledRegion fr = new FilledRegion(vl1, vl2);
fr.Brush = Brushes.Coral;
if (num == i)
{
fr.Brush = Brushes.Gray;
}
plotObsSpectrum.Add(fr);
}
// add observed spectrum;
if (this.obsSpectrum != null)
{
LinePlot lp = new LinePlot();
lp.AbscissaData = this.obsSpectrum.LambdaSet;
lp.OrdinateData = this.obsSpectrum.FluxSet;
lp.Pen = new Pen(Color.Black, 1.0f);
plotObsSpectrum.Add(lp);
}
// add continum;
if (this.contSpectrum != null)
{
LinePlot lpCont = new LinePlot(this.contSpectrum.FluxSet, this.contSpectrum.LambdaSet);
lpCont.Pen = new Pen(Color.Red, 2.0f);
plotObsSpectrum.Add(lpCont);
}
// add rejected points;
if (this.rejectSpectrum != null && this.rejectSpectrum.Size > 0)
{
PointPlot ppRej = new PointPlot();
ppRej.AbscissaData = this.rejectSpectrum.LambdaSet;
ppRej.OrdinateData = this.rejectSpectrum.FluxSet;
ppRej.Marker = new Marker(Marker.MarkerType.Diamond, 4, Color.Red);
plotObsSpectrum.Add(ppRej);
}
plotObsSpectrum.Title = "Observed spectrum";
plotObsSpectrum.YAxis1.Label = "Flux";
plotObsSpectrum.XAxis1.Label = "Lambda";
plotObsSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.HorizontalDrag());
plotObsSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.VerticalDrag());
plotObsSpectrum.AddInteraction(new NPlot.Windows.PlotSurface2D.Interactions.AxisDrag(true));
plotObsSpectrum.Refresh();
}
private void CreateDimensions(
FilledRegion filledRegion,
XYZ dimensionDirection,
string typeName)
{
var document = filledRegion.Document;
var view = (View)document.GetElement(
filledRegion.OwnerViewId);
var edgesDirection = dimensionDirection.CrossProduct(
view.ViewDirection);
var edges = FindRegionEdges(filledRegion)
.Where(x => IsEdgeDirectionSatisfied(x, edgesDirection))
.ToList();
if (edges.Count < 2)
{
return;
}
// Se hace este ajuste para que la distancia no
// depende de la escala. <<<<<< evaluar para
// información de acotado y etiquetado!!!
//var shift = UnitUtils.ConvertToInternalUnits(
// 5 * view.Scale, DisplayUnitType.DUT_MILLIMETERS ) // 2020
// * edgesDirection;
var shift = UnitUtils.ConvertToInternalUnits(
5 * view.Scale, UnitTypeId.Millimeters) // 2021
* edgesDirection;
var dimensionLine = Line.CreateUnbound(
filledRegion.get_BoundingBox(view).Min + shift,
dimensionDirection);
var references = new ReferenceArray();
foreach (var edge in edges)
{
references.Append(edge.Reference);
}
Dimension dim = document.Create.NewDimension(
view, dimensionLine, references);
ElementId dr_id = DimensionTypeId(
document, typeName);
if (dr_id != null)
{
dim.ChangeTypeId(dr_id);
}
}
void glVertex2i(float x, float y, bool IsEdge)
{
#if UNI
//Debug.Log( x + " , " + y );
//BezierPath.SpawnCube( new Vector3( x / 10.0f , y / 10.0f ) );
FilledRegion.Add(new Vector3(x, y), IsEdge);
#else
Trace.WriteLine(x + " , " + y);
#endif
}
public static Face GetFace(FilledRegion fr, Options options)
{
GeometryElement geometryElement = fr.get_Geometry(options);
foreach (GeometryObject go in geometryElement)
{
Solid solid = go as Solid;
return(solid.Faces.get_Item(0));
}
return(null);
}
/// <summary>
/// 获取详图区域的Edges
/// </summary>
public static List <Edge> Edges(this FilledRegion filledRegion, View _view)
{
Options options = new Options();
options.View = _view;
options.ComputeReferences = true;
GeometryElement geometryElement = filledRegion.get_Geometry(options);
Solid solid = geometryElement.First() as Solid;
return(solid.Edges.ToIEnumerable().ToList());
}
public void PlotTest()
{
plotSurface.Clear();
// can plot different types.
ArrayList l = new ArrayList();
l.Add((int)2);
l.Add((double)1.0);
l.Add((float)3.0);
l.Add((int)5.0);
LinePlot lp1 = new LinePlot(new double[] { 4.0, 3.0, 5.0, 8.0 });
lp1.Pen = new Pen(Color.LightBlue);
lp1.Pen.Width = 2.0f;
//lp.AbscissaData = new StartStep( 0.0, 2.0 );
LinePlot lp2 = new LinePlot(new double[] { 2.0, 1.0, 4.0, 5.0 });
lp2.Pen = new Pen(Color.LightBlue);
lp2.Pen.Width = 2.0f;
FilledRegion fr = new FilledRegion(lp1, lp2);
plotSurface.Add(fr);
plotSurface.Add(new Grid());
plotSurface.Add(lp1);
plotSurface.Add(lp2);
ArrowItem a = new ArrowItem(new PointD(2, 4), -50.0f, "Arrow");
a.HeadOffset = 5;
a.ArrowColor = Color.Red;
a.TextColor = Color.Purple;
plotSurface.Add(a);
MarkerItem m = new MarkerItem(new Marker(Marker.MarkerType.TriangleDown, 8, Color.ForestGreen), 1.38, 2.9);
plotSurface.Add(m);
plotSurface.XAxis1.TicksCrossAxis = true;
((LinearAxis)plotSurface.XAxis1).LargeTickValue = -4.1;
((LinearAxis)plotSurface.XAxis1).AutoScaleText = true;
((LinearAxis)plotSurface.XAxis1).TicksIndependentOfPhysicalExtent = true;
//plotSurface.XAxis1.Label = "Hello world";
plotSurface.Refresh();
}
public PriceAction()
{
plotSurface = new NPlot.Bitmap.PlotSurface2D(700, 500);
string infoText = "";
infoText += "Simple CandlePlot example. Demonstrates - \n";
infoText += " * Setting candle plot datapoints using arrays \n";
infoText += " * Plot Zoom interaction using MouseWheel ";
plotSurface.Clear();
FilledRegion fr = new FilledRegion(
new VerticalLine(1.2),
new VerticalLine(2.4));
fr.Brush = Brushes.BlanchedAlmond;
plotSurface.Add(fr);
// note that arrays can be of any type you like.
int[] opens = { 1, 2, 1, 2, 1, 3 };
double[] closes = { 2, 2, 2, 1, 2, 1 };
float[] lows = { 0, 1, 1, 1, 0, 0 };
System.Int64[] highs = { 3, 2, 3, 3, 3, 4 };
int[] times = { 0, 1, 2, 3, 4, 5 };
CandlePlot cp = new CandlePlot();
cp.CloseData = closes;
cp.OpenData = opens;
cp.LowData = lows;
cp.HighData = highs;
cp.AbscissaData = times;
plotSurface.Add(cp);
HorizontalLine line = new HorizontalLine(1.2);
line.LengthScale = 0.89f;
plotSurface.Add(line, -10);
VerticalLine line2 = new VerticalLine(1.2);
line2.LengthScale = 0.89f;
plotSurface.Add(line2);
plotSurface.AddInteraction(new PlotZoom());
plotSurface.Title = "Line in the Title Number 1\nFollowed by another title line\n and another";
plotSurface.Refresh();
}
/// <summary>
/// 获取详图区域的详图线
/// </summary>
public static List <DetailCurve> DetailCurves(this FilledRegion filledRegion, Document doc)
{
ElementClassFilter elementClassFilter = new ElementClassFilter(typeof(CurveElement));
List <ElementId> detailLineIds = filledRegion.GetDependentElements(elementClassFilter).ToList();
List <DetailCurve> detailCurves = new List <DetailCurve>();
foreach (ElementId elementId in detailLineIds)
{
DetailCurve detailCurve = doc.GetElement(elementId) as DetailCurve;
detailCurves.Add(detailCurve);
}
return(detailCurves);
}
public void ByCurves_ValidArgs()
{
Autodesk.Revit.DB.FilteredElementCollector collector = new Autodesk.Revit.DB.FilteredElementCollector(Revit.Application.Document.Current.InternalDocument).OfClass(typeof(Autodesk.Revit.DB.FilledRegionType));
FilledRegionType type = FilledRegionType.FromExisting((Autodesk.Revit.DB.FilledRegionType)collector.FirstOrDefault(), true);
Assert.NotNull(type);
Polygon polygon = Polygon.RegularPolygon(Circle.ByCenterPointRadius(Point.ByCoordinates(0, 0, 0), 10), 4);
Assert.NotNull(polygon);
var reg = FilledRegion.ByCurves(Revit.Application.Document.Current.ActiveView, polygon.Curves().ToList(), type);
Assert.NotNull(reg);
}
private static IEnumerable <Edge> FindRegionEdges(FilledRegion filledRegion)
{
var view = (View)filledRegion.Document.GetElement(filledRegion.OwnerViewId);
var options = new Options
{
View = view,
ComputeReferences = true
};
return(filledRegion
.get_Geometry(options)
.OfType <Solid>()
.SelectMany(x => x.Edges.Cast <Edge>()));
}
/// <summary>
/// 生成填充区域
/// </summary>
/// <param name="doc"></param>
/// <param name="typeId"></param>
/// <param name="viewId"></param>
/// <param name="loop"></param>
/// <param name="name"></param>
/// <returns></returns>
public static ElementId CreateFilledRegion(Document doc, ElementId typeId, ElementId viewId, List <CurveLoop> loop, String name = "")
{
FilledRegion region = null;
using (Transaction tran = new Transaction(doc, "FilledRegion"))
{
tran.Start();
region = FilledRegion.Create(doc, typeId, viewId, loop);
if (!String.IsNullOrEmpty(name))
{
region.get_Parameter(BuiltInParameter.ALL_MODEL_INSTANCE_COMMENTS).Set(name);
}
tran.Commit();
}
return(region.Id);
}
/// <summary>
/// 在有元素内 抓取所有障碍物线圈
/// </summary>
public List <CurveLoop> RegionGrabobstaclesLineLoop(Document doc, List <Element> selEles)
{
List <CurveLoop> obstacleLineLoops = new List <CurveLoop>();
foreach (Element _ele in selEles)
{
if (_ele is FilledRegion)
{
if (_ele.Name == "详图填充区域")
{
FilledRegion filledRegion = _ele as FilledRegion;
obstacleLineLoops.AddRange(filledRegion.GetBoundaries());
}
}
}
return(obstacleLineLoops);
}
private void checkBox13_CheckedChanged(object sender, EventArgs e)
{
CheckBox cbx = (CheckBox)sender;
if (cbx.Checked == true)
{
LinePlot lp3 = new LinePlot();
int[] p = new int[10] {
1, 2, 3, 4, 5, 4, 3, 2, 1, 3
};
int[] X = new int[10] {
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
};
lp3.OrdinateData = p;
lp3.AbscissaData = X;
lp3.Pen = new Pen(Color.Orange);
lp3.Pen.Width = 2;
lp3.Label = " 价格";
LinePlot lp4 = new LinePlot();
int[] p2 = new int[10] {
1, 1, 1, 1, 1, 1, 1, 1, 1, 1
};
lp4.OrdinateData = p2;
lp4.AbscissaData = X;
lp4.Pen = new Pen(Color.Orange);
lp4.Pen.Width = 2;
lp4.Label = " 价格";
fr = new FilledRegion(lp3, lp4);
fr.Brush = Brushes.BlanchedAlmond;
this.myPlot.Add(fr);
}
else
{
if (fr != null)
{
this.myPlot.Remove(fr, false);
}
}
myPlot.Refresh();
}
/***************************************************/
private static Element ToRevitElement(this DraftingInstance draftingInstance, FilledRegionType regionType, View view, RevitSettings settings)
{
ISurface location = draftingInstance.Location as ISurface;
List <PlanarSurface> surfaces = new List <PlanarSurface>();
if (location is PlanarSurface)
{
surfaces.Add((PlanarSurface)location);
}
else if (location is PolySurface)
{
PolySurface polySurface = (PolySurface)location;
if (polySurface.Surfaces.Any(x => !(x is PlanarSurface)))
{
draftingInstance.InvalidRegionSurfaceError();
return(null);
}
surfaces = polySurface.Surfaces.Cast <PlanarSurface>().ToList();
}
else
{
draftingInstance.InvalidRegionSurfaceError();
return(null);
}
List <CurveLoop> loops = new List <CurveLoop>();
foreach (PlanarSurface surface in surfaces)
{
foreach (ICurve curve in surface.Edges())
{
loops.Add(curve.ToRevitCurveLoop());
}
}
if (loops.Count != 0)
{
return(FilledRegion.Create(view.Document, regionType.Id, view.Id, loops));
}
return(null);
}
private static void CreateDimensions(
FilledRegion filledRegion,
XYZ dimensionDirection)
{
var document = filledRegion.Document;
var view = (View)document.GetElement(
filledRegion.OwnerViewId);
var edgesDirection = dimensionDirection.CrossProduct(
view.ViewDirection);
var edges = FindRegionEdges(filledRegion)
.Where(x => IsEdgeDirectionSatisfied(x, edgesDirection))
.ToList();
if (edges.Count < 2)
{
return;
}
//var shift = UnitUtils.ConvertToInternalUnits(
// -10 * view.Scale, DisplayUnitType.DUT_MILLIMETERS ) // 2020
// * edgesDirection;
var shift = UnitUtils.ConvertToInternalUnits(
-10 * view.Scale, UnitTypeId.Millimeters) // 2021
* edgesDirection;
var dimensionLine = Line.CreateUnbound(
filledRegion.get_BoundingBox(view).Min
+ shift, dimensionDirection);
var references = new ReferenceArray();
foreach (var edge in edges)
{
references.Append(edge.Reference);
}
document.Create.NewDimension(view, dimensionLine,
references);
}
public void CreatePlot(InteractivePlotSurface2D plotSurface)
{
plotSurface.Clear();
FilledRegion fr = new FilledRegion(
new VerticalLine(1.2),
new VerticalLine(2.4));
fr.Brush = Brushes.BlanchedAlmond;
plotSurface.Add(fr);
// note that arrays can be of any type you like.
int[] opens = { 1, 2, 1, 2, 1, 3 };
double[] closes = { 2, 2, 2, 1, 2, 1 };
float[] lows = { 0, 1, 1, 1, 0, 0 };
System.Int64[] highs = { 3, 2, 3, 3, 3, 4 };
int[] times = { 0, 1, 2, 3, 4, 5 };
CandlePlot cp = new CandlePlot();
cp.CloseData = closes;
cp.OpenData = opens;
cp.LowData = lows;
cp.HighData = highs;
cp.AbscissaData = times;
plotSurface.Add(cp);
HorizontalLine line = new HorizontalLine(1.2);
line.LengthScale = 0.89f;
plotSurface.Add(line, -10);
VerticalLine line2 = new VerticalLine(1.2);
line2.LengthScale = 0.89f;
plotSurface.Add(line2);
plotSurface.AddInteraction(new PlotZoom());
plotSurface.Title = "Line in the Title Number 1\nFollowed by another title line\n and another";
plotSurface.Refresh();
}
public void ByCircle_ValidArgs()
{
Autodesk.Revit.DB.FilteredElementCollector collector = new Autodesk.Revit.DB.FilteredElementCollector(Revit.Application.Document.Current.InternalDocument).OfClass(typeof(Autodesk.Revit.DB.FilledRegionType));
FilledRegionType type = FilledRegionType.FromExisting((Autodesk.Revit.DB.FilledRegionType)collector.FirstOrDefault(), true);
Assert.NotNull(type);
Circle c = Circle.ByCenterPointRadius(Point.ByCoordinates(0, 0, 0), 10);
Assert.NotNull(c);
Curve[] curves = c.ApproximateWithArcAndLineSegments();
// Approximate With Arc and Lines returns one Curve which is not closed. Seems odd.
if (curves.Count() > 0 && curves[0].IsClosed)
{
var reg = FilledRegion.ByCurves(Revit.Application.Document.Current.ActiveView, curves, type);
Assert.NotNull(reg);
}
}
private void checkBox9_CheckedChanged(object sender, EventArgs e)
{
CheckBox cbx = (CheckBox)sender;
if (cbx.Checked == true)
{
fr = new FilledRegion(new VerticalLine(1.2), new VerticalLine(2.4));
fr.Brush = Brushes.BlanchedAlmond;
this.myPlot.Add(fr);
}
else
{
if (fr != null)
{
this.myPlot.Remove(fr, false);
}
}
myPlot.Refresh();
}
public FilledPoly MakeFilledPoly(List <Vector3> poly)
{
FilledRegion.Clear( );
CustomSampler edgeTablesampler = CustomSampler.Create("initEdgeTable");
CustomSampler drawDinoSampler = CustomSampler.Create("drawDino");
CustomSampler scanFillSampler = CustomSampler.Create("scanFillSampler");
edgeTablesampler.Begin( );
initEdgeTable( );
edgeTablesampler.End( );
drawDinoSampler.Begin( );
drawPolyDino(poly);
drawDinoSampler.End( );
//printf( "\nTable" );
//printTable( );
scanFillSampler.Begin( );
ScanlineFill( );//actual calling of scanline filling..
scanFillSampler.End( );
return(FilledRegion);
}
/// <summary>
/// Exports an element as an annotation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="filledRegion">The filled region element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, FilledRegion filledRegion,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (filledRegion == null || geometryElement == null)
return;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IList<CurveLoop> boundaries = filledRegion.GetBoundaries();
if (boundaries.Count == 0)
return;
Plane plane = null;
try
{
plane = boundaries[0].GetPlane();
}
catch
{
return;
}
Transform orientTrf = Transform.Identity;
orientTrf.BasisX = plane.XVec; orientTrf.BasisY = plane.YVec; orientTrf.BasisZ = plane.Normal;
orientTrf.Origin = plane.Origin;
XYZ projectionDirection = plane.Normal;
IList<IList<CurveLoop>> sortedLoops = ExporterIFCUtils.SortCurveLoops(boundaries);
if (sortedLoops.Count == 0)
return;
FilledRegionType filledRegionType = filledRegion.Document.GetElement(filledRegion.GetTypeId()) as FilledRegionType;
Color color = filledRegionType != null ? CategoryUtil.GetSafeColor(filledRegionType.Color) : new Color(0, 0, 0);
ElementId fillPatternId = filledRegionType != null ? filledRegionType.FillPatternId : ElementId.InvalidElementId;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(filledRegion);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, filledRegion, null, orientTrf))
{
foreach (IList<CurveLoop> curveLoopList in sortedLoops)
{
IFCAnyHandle outerCurve = null;
HashSet<IFCAnyHandle> innerCurves = null;
for (int ii = 0; ii < curveLoopList.Count; ii++)
{
IFCAnyHandle ifcCurve = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, curveLoopList[ii], plane, projectionDirection);
if (ii == 0)
outerCurve = ifcCurve;
else
{
if (innerCurves == null)
innerCurves = new HashSet<IFCAnyHandle>();
innerCurves.Add(ifcCurve);
}
}
IFCAnyHandle representItem = IFCInstanceExporter.CreateAnnotationFillArea(file, outerCurve, innerCurves);
file.CreateStyle(exporterIFC, representItem, color, fillPatternId);
HashSet<IFCAnyHandle> bodyItems = new HashSet<IFCAnyHandle>();
bodyItems.Add(representItem);
IFCAnyHandle bodyRepHnd = RepresentationUtil.CreateAnnotationSetRep(exporterIFC, filledRegion, categoryId,
exporterIFC.Get2DContextHandle(), bodyItems);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd))
return;
List<IFCAnyHandle> shapeReps = new List<IFCAnyHandle>();
shapeReps.Add(bodyRepHnd);
IFCAnyHandle productShape = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle annotation = IFCInstanceExporter.CreateAnnotation(file, GUIDUtil.CreateGUID(), exporterIFC.GetOwnerHistoryHandle(),
null, null, null, setter.LocalPlacement, productShape);
productWrapper.AddAnnotation(annotation, setter.LevelInfo, true);
}
}
transaction.Commit();
}
}
/// <summary>
/// Pick a DWG import instance, extract polylines
/// from it visible in the current view and create
/// filled regions from them.
/// </summary>
public void ProcessVisible(UIDocument uidoc)
{
Document doc = uidoc.Document;
View active_view = doc.ActiveView;
List <GeometryObject> visible_dwg_geo
= new List <GeometryObject>();
// Pick Import Instance
Reference r = uidoc.Selection.PickObject(
ObjectType.Element,
new JtElementsOfClassSelectionFilter <ImportInstance>());
var import = doc.GetElement(r) as ImportInstance;
// Get Geometry
var ge = import.get_Geometry(new Options());
foreach (var go in ge)
{
if (go is GeometryInstance)
{
var gi = go as GeometryInstance;
var ge2 = gi.GetInstanceGeometry();
if (ge2 != null)
{
foreach (var obj in ge2)
{
// Only work on PolyLines
if (obj is PolyLine)
{
// Use the GraphicsStyle to get the
// DWG layer linked to the Category
// for visibility.
var gStyle = doc.GetElement(
obj.GraphicsStyleId) as GraphicsStyle;
// Check if the layer is visible in the view.
if (!active_view.GetCategoryHidden(
gStyle.GraphicsStyleCategory.Id))
{
visible_dwg_geo.Add(obj);
}
}
}
}
}
}
// Do something with the info
if (visible_dwg_geo.Count > 0)
{
// Retrieve first filled region type
var filledType = new FilteredElementCollector(doc)
.WhereElementIsElementType()
.OfClass(typeof(FilledRegionType))
.OfType <FilledRegionType>()
.First();
using (var t = new Transaction(doc))
{
t.Start("ProcessDWG");
foreach (var obj in visible_dwg_geo)
{
var poly = obj as PolyLine;
// Draw a filled region for each polyline
if (null != poly)
{
// Create loops for detail region
var curveLoop = new CurveLoop();
var points = poly.GetCoordinates();
for (int i = 0; i < points.Count - 1; ++i)
{
curveLoop.Append(Line.CreateBound(
points[i], points[i + 1]));
}
FilledRegion.Create(doc,
filledType.Id, active_view.Id,
new List <CurveLoop>()
{
curveLoop
});
}
}
t.Commit();
}
}
}
/// <summary>
/// Exports an element as an annotation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="filledRegion">The filled region element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void Export(ExporterIFC exporterIFC, FilledRegion filledRegion,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (filledRegion == null || geometryElement == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcAnnotation;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IList <CurveLoop> boundaries = filledRegion.GetBoundaries();
if (boundaries.Count == 0)
{
return;
}
Plane plane = null;
try
{
plane = boundaries[0].GetPlane();
}
catch
{
return;
}
Transform orientTrf = GeometryUtil.CreateTransformFromPlane(plane);
XYZ projectionDirection = plane.Normal;
IList <IList <CurveLoop> > sortedLoops = ExporterIFCUtils.SortCurveLoops(boundaries);
if (sortedLoops.Count == 0)
{
return;
}
FilledRegionType filledRegionType = filledRegion.Document.GetElement(filledRegion.GetTypeId()) as FilledRegionType;
Color color = filledRegionType != null?CategoryUtil.GetSafeColor(filledRegionType.ForegroundPatternColor) : new Color(0, 0, 0);
ElementId foregroundPatternId = filledRegionType != null ? filledRegionType.ForegroundPatternId : ElementId.InvalidElementId;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(filledRegion);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, filledRegion, null, orientTrf))
{
foreach (IList <CurveLoop> curveLoopList in sortedLoops)
{
IFCAnyHandle outerCurve = null;
HashSet <IFCAnyHandle> innerCurves = null;
for (int ii = 0; ii < curveLoopList.Count; ii++)
{
IFCAnyHandle ifcCurve = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, curveLoopList[ii], orientTrf, projectionDirection);
if (ii == 0)
{
outerCurve = ifcCurve;
}
else
{
if (innerCurves == null)
{
innerCurves = new HashSet <IFCAnyHandle>();
}
innerCurves.Add(ifcCurve);
}
}
IFCAnyHandle representItem = IFCInstanceExporter.CreateAnnotationFillArea(file, outerCurve, innerCurves);
file.CreateStyle(exporterIFC, representItem, color, foregroundPatternId);
HashSet <IFCAnyHandle> bodyItems = new HashSet <IFCAnyHandle>();
bodyItems.Add(representItem);
IFCAnyHandle bodyRepHnd = RepresentationUtil.CreateAnnotationSetRep(exporterIFC, filledRegion, categoryId,
exporterIFC.Get2DContextHandle(), bodyItems);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd))
{
return;
}
List <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
shapeReps.Add(bodyRepHnd);
IFCAnyHandle productShape = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps);
IFCAnyHandle annotation = IFCInstanceExporter.CreateAnnotation(exporterIFC, filledRegion, GUIDUtil.CreateGUID(), ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, productShape);
productWrapper.AddAnnotation(annotation, setter.LevelInfo, true);
}
}
transaction.Commit();
}
}