/// <summary>
/// ControlSystem Constructor. Starting point for the SIMPL#Pro program.
/// Use the constructor to:
/// * Initialize the maximum number of threads (max = 400)
/// * Register devices
/// * Register event handlers
/// * Add Console Commands
///
/// Please be aware that the constructor needs to exit quickly; if it doesn't
/// exit in time, the SIMPL#Pro program will exit.
///
/// You cannot send / receive data in the constructor
/// </summary>
public ControlSystem()
: base()
{
try
{
Thread.MaxNumberOfUserThreads = 20;
//System.Security.Cryptography.SHA1.Create();
//register device
myKeypad = new C2nCbdP(0x25, this);
myKeypad.ButtonStateChange += (device, args) =>
{
var btn = args.Button;
var uo = btn.UserObject;
CrestronConsole.PrintLine("Event sig: {0}, Type: {1}, State: {2}", btn.Number, btn.GetType(),
btn.State);
if (btn.State == eButtonState.Pressed)
{
switch (btn.Number)
{
case 1:
if (myDimmer.DinLoads[2].LevelOut.UShortValue > 0)
{
myDimmer.DinLoads[2].LevelIn.UShortValue = SimplSharpDeviceHelper.PercentToUshort(0f);
myKeypad.Feedbacks[1].State = false;
}
else
{
myDimmer.DinLoads[2].LevelIn.UShortValue =
SimplSharpDeviceHelper.PercentToUshort(100f);
myKeypad.Feedbacks[1].State = true;
}
break;
case 2:
if (myDimmer.DinLoads[3].LevelOut.UShortValue > 0)
{
myDimmer.DinLoads[3].LevelIn.UShortValue = SimplSharpDeviceHelper.PercentToUshort(0f);
myKeypad.Feedbacks[2].State = false;
}
else
{
myDimmer.DinLoads[3].LevelIn.UShortValue =
SimplSharpDeviceHelper.PercentToUshort(100f);
myKeypad.Feedbacks[2].State = true;
}
break;
case 5:
myRelay.SwitchedLoads[1].FullOn();
myRelay.SwitchedLoads[2].FullOff();
break;
case 6:
myRelay.SwitchedLoads[2].FullOn();
myRelay.SwitchedLoads[1].FullOff();
break;
case 7:
myRelay.SwitchedLoads[3].FullOn();
myRelay.SwitchedLoads[4].FullOff();
break;
case 8:
myRelay.SwitchedLoads[4].FullOn();
myRelay.SwitchedLoads[3].FullOff();
break;
default:
break;
}
}
};
if (myKeypad.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine(" Unable to register for keypad ");
CrestronConsole.PrintLine("myKeypad {0} failed registration. Cause: {1}", 0x25, myKeypad.RegistrationFailureReason);
ErrorLog.Error("myKeypad {0} failed registration. Cause: {1}", 0x25, myKeypad.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine(" Keypad successfully registered ");
}
myKeypad2 = new C2niCb(0x26, this);
myKeypad2.ButtonStateChange += (device, args) =>
{
var btn = args.Button;
var uo = btn.UserObject;
CrestronConsole.PrintLine("Event keypad 2 sig: {0}, Type: {1}, State: {2}", btn.Number,
btn.GetType(), btn.State);
if (btn.State == eButtonState.Pressed)
{
switch (btn.Number)
{
case 2:
if (myDimmer.DinLoads[1].LevelOut.UShortValue > 0)
{
myDimmer.DinLoads[1].LevelIn.UShortValue = SimplSharpDeviceHelper.PercentToUshort(0f);
myKeypad2.Feedbacks[1].State = false;
myKeypad2.Feedbacks[2].State = false;
}
else
{
myDimmer.DinLoads[1].LevelIn.UShortValue =
SimplSharpDeviceHelper.PercentToUshort(100f);
myKeypad2.Feedbacks[1].State = true;
myKeypad2.Feedbacks[2].State = true;
}
break;
case 9:
myRelay.SwitchedLoads[5].FullOn();
myRelay.SwitchedLoads[6].FullOff();
break;
case 11:
myRelay.SwitchedLoads[6].FullOn();
myRelay.SwitchedLoads[5].FullOff();
break;
default:
break;
}
}
};
if (myKeypad2.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine(" Unable to register for keypad2 ");
CrestronConsole.PrintLine("myKeypad2 {0} failed registration. Cause: {1}", 0x26, myKeypad2.RegistrationFailureReason);
ErrorLog.Error("myKeypad2 {0} failed registration. Cause: {1}", 0x26, myKeypad2.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine(" Keypad2 successfully registered ");
}
myDimmer = new Din1DimU4(0x0A, this);
// Now register the event handlers
myDimmer.OverrideEventHandler += (device, overrideEvent) =>
{
switch (overrideEvent)
{
case eOverrideEvents.External:
CrestronConsole.PrintLine(" Device reports external override event. State is {0} ",
myDimmer.InExternalOverrideFeedback.BoolValue);
break;
case eOverrideEvents.Manual:
CrestronConsole.PrintLine(" Device reports manual override event. State is {0} ",
myDimmer.InManualOverrideFeedback.BoolValue);
break;
}
};
myDimmer.OnlineStatusChange += (currentDevice, args) => CrestronConsole.PrintLine(" Din1DimU4 state {0} ", args.DeviceOnLine ? "Online" : "Offline");
myDimmer.BaseEvent += (device, args) =>
{
//CrestronConsole.PrintLine("dimmer {0}", args.EventId);
switch (args.EventId)
{
case DinLoadBaseClass.LevelOutFeedbackEventId:
CrestronConsole.PrintLine(" Level out changed for output {0} ", args.Index);
CrestronConsole.PrintLine(" Value of load is {0} ",
myDimmer.DinLoads[(uint)args.Index].LevelOut.UShortValue);
//myDimmer.DinLoads[(uint)args.Index].LevelIn.UShortValue = myDimmer.DinLoads[(uint)args.Index].LevelOut.UShortValue;
break;
case DinLoadBaseClass.NoAcPowerFeedbackEventId:
CrestronConsole.PrintLine(" NoAcPowerFeedbackEventId fired. State is {0} ",
myDimmer.NoAcPower.BoolValue);
break;
}
};
// Need to set parameters before we register the device
foreach (DinDimmableLoad dimmableLoad in myDimmer.DinLoads)
{
dimmableLoad.ParameterDimmable = eDimmable.No;
}
// Register the device now
if (myDimmer.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine(" Unable to register for dimmer ");
CrestronConsole.PrintLine("myDimmer {0} failed registration. Cause: {1}", 0x0A, myDimmer.RegistrationFailureReason);
ErrorLog.Error("myDimmer {0} failed registration. Cause: {1}", 0x0A, myDimmer.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine(" Dimmer successfully registered ");
}
myRelay = new Din8Sw8i(0x92, this);
myRelay.OverrideEventHandler += (device, overrideEvent) =>
{
switch (overrideEvent)
{
case eOverrideEvents.External:
CrestronConsole.PrintLine(" Device relay reports external override event. State is {0} ",
myRelay.InExternalOverrideFeedback.BoolValue);
break;
case eOverrideEvents.Manual:
CrestronConsole.PrintLine(" Device relay reports manual override event. State is {0} ",
myRelay.InManualOverrideFeedback.BoolValue);
break;
}
};
myRelay.OnlineStatusChange += (currentDevice, args) => CrestronConsole.PrintLine(" Din8Sw8i state {0} ", args.DeviceOnLine ? "Online" : "Offline");
myRelay.BaseEvent += (device, args) =>
{
CrestronConsole.PrintLine("relay {0}", args.EventId);
switch (args.EventId)
{
//case DinLoadBaseClass.LevelOutFeedbackEventId:
// CrestronConsole.PrintLine(" relay Level out changed for output {0} ", args.Index);
// //CrestronConsole.PrintLine(" Value of load is {0} ", myRelay.DinLoads[(uint)args.Index].LevelOut.UShortValue);
// break;
//case DinLoadBaseClass.NoAcPowerFeedbackEventId:
// CrestronConsole.PrintLine(" NoAcPowerFeedbackEventId fired. State is {0} ", myRelay.NoAcPower.BoolValue);
// break;
}
};
myRelay.LoadStateChange += (lightingObject, args) =>
{
CrestronConsole.PrintLine("load relay {0}", args.EventId);
// use this structure to react to the different events
switch (args.EventId)
{
case LoadEventIds.IsOnEventId:
CrestronConsole.PrintLine(" relay Level out changed for output {0} ", args.Load.Number);
CrestronConsole.PrintLine(" Value of load is {0} ",
myRelay.SwitchedLoads[args.Load.Number].IsOn);
//xp.BooleanInput[1].BoolValue = !lampDimmer.DimmingLoads[1].IsOn;
//xp.BooleanInput[2].BoolValue = lampDimmer.DimmingLoads[1].IsOn;
break;
case LoadEventIds.LevelChangeEventId:
//xp.UShortInput[1].UShortValue = lampDimmer.DimmingLoads[1].LevelFeedback.UShortValue;
break;
case LoadEventIds.LevelInputChangedEventId:
//xp.UShortInput[1].CreateRamp(lampDimmer.DimmingLoads[1].Level.RampingInformation);
break;
default:
break;
}
};
// Register the device now
if (myRelay.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine(" Unable to register for relay ");
CrestronConsole.PrintLine("myRelay {0} failed registration. Cause: {1}", 0x92, myRelay.RegistrationFailureReason);
ErrorLog.Error("myRelay {0} failed registration. Cause: {1}", 0x92, myRelay.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine(" Relay successfully registered ");
}
//Subscribe to the controller events (System, Program, and Ethernet)
CrestronEnvironment.SystemEventHandler += systemEventType =>
{
switch (systemEventType)
{
case (eSystemEventType.DiskInserted):
//Removable media was detected on the system
break;
case (eSystemEventType.DiskRemoved):
//Removable media was detached from the system
break;
case (eSystemEventType.Rebooting):
//The system is rebooting.
//Very limited time to preform clean up and save any settings to disk.
break;
}
};
CrestronEnvironment.ProgramStatusEventHandler += programStatusEventType =>
{
switch (programStatusEventType)
{
case (eProgramStatusEventType.Paused):
//The program has been paused. Pause all user threads/timers as needed.
break;
case (eProgramStatusEventType.Resumed):
//The program has been resumed. Resume all the user threads/timers as needed.
break;
case (eProgramStatusEventType.Stopping):
//The program has been stopped.
//Close all threads.
//Shutdown all Client/Servers in the system.
//General cleanup.
//Unsubscribe to all System Monitor events
break;
}
};
CrestronEnvironment.EthernetEventHandler += ethernetEventArgs =>
{
switch (ethernetEventArgs.EthernetEventType)
{
//Determine the event type Link Up or Link Down
case (eEthernetEventType.LinkDown):
//Next need to determine which adapter the event is for.
//LAN is the adapter is the port connected to external networks.
if (ethernetEventArgs.EthernetAdapter == EthernetAdapterType.EthernetLANAdapter)
{
//
}
break;
case (eEthernetEventType.LinkUp):
if (ethernetEventArgs.EthernetAdapter == EthernetAdapterType.EthernetLANAdapter)
{
}
break;
}
};
//my console command
CrestronConsole.AddNewConsoleCommand(Hello, "hello", "hello command", ConsoleAccessLevelEnum.AccessOperator);
}
catch (Exception e)
{
ErrorLog.Error("Error in the constructor: {0}", e.Message);
}
}
/// <summary>
/// ControlSystem Constructor. Starting point for the SIMPL#Pro program.
/// Use the constructor to:
/// * Initialize the maximum number of threads (max = 400)
/// * Register devices
/// * Register event handlers
/// * Add Console Commands
///
/// Please be aware that the constructor needs to exit quickly; if it doesn't
/// exit in time, the SIMPL#Pro program will exit.
///
/// You cannot send / receive data in the constructor
/// </summary>
public ControlSystem()
: base()
{
try
{
Thread.MaxNumberOfUserThreads = 20;
officeDin8Sw8i = new Din8Sw8i(0x3, this);
if (officeDin8Sw8i.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for officeDin8Sw8i ");
CrestronConsole.PrintLine("officeDin8Sw8i failed registration. Cause: {0}", officeDin8Sw8i.RegistrationFailureReason);
ErrorLog.Error("officeDin8Sw8i failed registration. Cause: {0}", officeDin8Sw8i.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("officeDin8Sw8i successfully registered ");
}
officeDinIo8 = new DinIo8(0x9, this);
if (officeDinIo8.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for officeDinIo8 ");
CrestronConsole.PrintLine("officeDinIo8 failed registration. Cause: {0}", officeDinIo8.RegistrationFailureReason);
ErrorLog.Error("officeDinIo8 failed registration. Cause: {0}", officeDinIo8.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("officeDinIo8 successfully registered ");
}
officeDin1DimU4 = new Din1DimU4(0x07, this);
if (officeDin1DimU4.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for officeDinIo8 ");
CrestronConsole.PrintLine("officeDin1DimU4 failed registration. Cause: {0}", officeDin1DimU4.RegistrationFailureReason);
ErrorLog.Error("officeDin1DimU4 failed registration. Cause: {0}", officeDin1DimU4.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("officeDin1DimU4 successfully registered ");
}
underShieldC2nCbdP = new C2nCbdP(0x5, this);
underShieldC2nCbdP.ButtonStateChange += new ButtonEventHandler(underShieldC2nCbdP_ButtonStateChange);
if (underShieldC2nCbdP.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for underShieldC2nCbdP ");
CrestronConsole.PrintLine("underShieldC2nCbdP failed registration. Cause: {0}", underShieldC2nCbdP.RegistrationFailureReason);
ErrorLog.Error("underShieldC2nCbdP failed registration. Cause: {0}", underShieldC2nCbdP.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine(" underShieldC2nCbdP successfully registered ");
}
entranceC2nCbdP = new C2nCbdP(0x4, this);
entranceC2nCbdP.ButtonStateChange += new ButtonEventHandler(entranceC2nCbdP_ButtonStateChange);
if (entranceC2nCbdP.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for entranceC2nCbdP ");
CrestronConsole.PrintLine("entranceC2nCbdP failed registration. Cause: {0}", entranceC2nCbdP.RegistrationFailureReason);
ErrorLog.Error("entranceC2nCbdP failed registration. Cause: {0}", entranceC2nCbdP.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("entranceC2nCbdP successfully registered ");
}
meetingC2niCb = new C2niCb(0x6, this);
meetingC2niCb.ButtonStateChange += new ButtonEventHandler(meetingC2niCb_ButtonStateChange);
if (meetingC2niCb.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for meetingC2niCb ");
CrestronConsole.PrintLine("meetingC2niCb failed registration. Cause: {0}", meetingC2niCb.RegistrationFailureReason);
ErrorLog.Error("meetingC2niCb failed registration. Cause: {0}", meetingC2niCb.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("meetingC2niCb successfully registered ");
}
officeIridium = new Xpanel(0x3, this);
officeIridium.SigChange += new SigEventHandler(officeIridium_SigChange);
if (officeIridium.Register() != eDeviceRegistrationUnRegistrationResponse.Success)
{
CrestronConsole.PrintLine("Unable to register for officeIridium ");
CrestronConsole.PrintLine("officeIridium failed registration. Cause: {0}", officeIridium.RegistrationFailureReason);
ErrorLog.Error("officeIridium failed registration. Cause: {0}", officeIridium.RegistrationFailureReason);
}
else
{
CrestronConsole.PrintLine("officeIridium successfully registered ");
}
//Subscribe to the controller events (System, Program, and Ethernet)
CrestronEnvironment.SystemEventHandler += new SystemEventHandler(ControlSystem_ControllerSystemEventHandler);
CrestronEnvironment.ProgramStatusEventHandler += new ProgramStatusEventHandler(ControlSystem_ControllerProgramEventHandler);
CrestronEnvironment.EthernetEventHandler += new EthernetEventHandler(ControlSystem_ControllerEthernetEventHandler);
}
catch (Exception e)
{
ErrorLog.Error("Error in the constructor: {0}", e.Message);
}
}