protected override bool InitCommunicateKernel(IO_SERVER server, IO_COMMUNICATION communication, List <IO_DEVICE> ioDevices, SCADA_DRIVER driver)
{
if (IsCreateControl)
{
CommunicationControl = new Modbus_Serial_Ctrl();
if (communication != null)
{
CommunicationControl.SetUIParameter(communication.IO_COMM_PARASTRING);
}
}
Serial_PARA = new Modbus_Serial_PARA();
if (communication != null)
{
comParaPack = new ParaPack(communication.IO_COMM_PARASTRING);
Serial_PARA.BaudRate = Convert.ToInt32(comParaPack.GetValue("波特率"));
Serial_PARA.CollectFaultsInternal = Convert.ToInt32(comParaPack.GetValue("重试间隔"));
Serial_PARA.CollectFaultsNumber = Convert.ToInt32(comParaPack.GetValue("重试次数"));
Serial_PARA.ContinueCollect = comParaPack.GetValue("连续采集") == "1" ? true : false;
Serial_PARA.DataBits = Convert.ToInt32(comParaPack.GetValue("数据位"));
Serial_PARA.ModbusType = (ModbusType)Enum.Parse(typeof(ModbusType), comParaPack.GetValue("MODBUS类型"));
Serial_PARA.OffsetInterval = Convert.ToInt32(comParaPack.GetValue("偏移间隔"));
Serial_PARA.PackMaxSize = Convert.ToInt32(comParaPack.GetValue("包最大长度"));
Serial_PARA.ReadTimeout = Convert.ToInt32(comParaPack.GetValue("读超时时间"));
Serial_PARA.RSTSendPreKeeyTime = Convert.ToInt32(comParaPack.GetValue("发送前RTS保持时间"));
Serial_PARA.RTSSendAfterKeeyTime = Convert.ToInt32(comParaPack.GetValue("发送后RTS保持时间"));
Serial_PARA.RTSEnable = comParaPack.GetValue("RTS") == "1" ? true : false;
Serial_PARA.SerialCheck = (SerialCheck)Enum.Parse(typeof(SerialCheck), comParaPack.GetValue("校验"));
Serial_PARA.SerialPort = comParaPack.GetValue("串口");
Serial_PARA.SimulatorSerialPort = comParaPack.GetValue("模拟器串口");
Serial_PARA.SixCommmand = comParaPack.GetValue("支持6号命令") == "1" ? true : false;
Serial_PARA.SixteenCommmand = comParaPack.GetValue("支持16号命令") == "1" ? true : false;;
Serial_PARA.StopBits = (StopBits)Enum.Parse(typeof(StopBits), comParaPack.GetValue("停止位"));
Serial_PARA.WriteTimeout = Convert.ToInt32(comParaPack.GetValue("写超时时间"));
//构造获取数据命令的字节数组,Modbus
for (int i = 0; i < this.IODevices.Count; i++)
{
object fragment = new ModbusFragmentStore();
RealData mRealData = new RealData();
mRealData.Device = this.IODevices[i];
ScadaDeviceKernel driverDll = DeviceDrives.Find(x => x.DeviceDriverID == this.IODevices[i].DEVICE_DRIVER_ID);
if (driverDll != null)
{
driverDll.InitKernel(IOServer, IOCommunication, this.IODevices[i], null, this.IODevices[i].DriverInfo);
//IO_DEVICE_ADDRESS中存储的是DTU编号
mRealData.SlaveId = this.IODevices[i].IO_DEVICE_ADDRESS;
//数据库中系统编号
mRealData.DEVICEID = this.IODevices[i].IO_DEVICE_ID;
//获取下发命令的参数,注意此次要进心分段存储，因为modbus一次不能超过123个寄存器地址
mRealData.Fragment = (ModbusFragmentStore)fragment;
RealDevices.Add(mRealData);
}
}
}
return(true);
}
protected override bool InitCommunicateKernel(IO_SERVER server, IO_COMMUNICATION communication, List <IO_DEVICE> ioDevices, SCADA_DRIVER driver)
{
if (IsCreateControl)
{
CommunicationControl = new Modbus_UDP_Ctrl();
if (communication != null)
{
CommunicationControl.SetUIParameter(communication.IO_COMM_PARASTRING);
}
}
Udp_PARA = new Modbus_TCP_PARA();
if (communication != null)
{
TcpParaPack = new ParaPack(communication.IO_COMM_PARASTRING);
Udp_PARA.CollectFaultsInternal = Convert.ToInt32(TcpParaPack.GetValue("重试间隔"));
Udp_PARA.CollectFaultsNumber = Convert.ToInt32(TcpParaPack.GetValue("重试次数"));
Udp_PARA.ContinueCollect = TcpParaPack.GetValue("重试") == "1" ? true : false;
Udp_PARA.LocalTCP_Port = TcpParaPack.GetValue("本地端口");
Udp_PARA.LocalTCP_IP = TcpParaPack.GetValue("本地IP");
Udp_PARA.SimulatorTCP_Port = TcpParaPack.GetValue("模拟设备端口");
Udp_PARA.SimulatorTCP_IP = TcpParaPack.GetValue("模拟设备IP");
Udp_PARA.WriteTimeout = int.Parse(TcpParaPack.GetValue("写超时时间"));
Udp_PARA.ReadTimeout = int.Parse(TcpParaPack.GetValue("读超时时间"));
Udp_PARA.WriteBufferSize = int.Parse(TcpParaPack.GetValue("写缓存"));
Udp_PARA.ReadBufferSize = int.Parse(TcpParaPack.GetValue("读缓存"));
//构造获取数据命令的字节数组,Modbus
for (int i = 0; i < this.IODevices.Count; i++)
{
object fragment = new ModbusFragmentStore();
RealData mRealData = new RealData();
mRealData.Device = this.IODevices[i];
ScadaDeviceKernel driverDll = DeviceDrives.Find(x => x.DeviceDriverID == this.IODevices[i].DEVICE_DRIVER_ID);
if (driverDll != null)
{
driverDll.InitKernel(IOServer, IOCommunication, this.IODevices[i], null, this.IODevices[i].DriverInfo);
//IO_DEVICE_ADDRESS中存储的是DTU编号
mRealData.SlaveId = this.IODevices[i].IO_DEVICE_ADDRESS;
//数据库中系统编号
mRealData.DEVICEID = this.IODevices[i].IO_DEVICE_ID;
//获取下发命令的参数,注意此次要进心分段存储，因为modbus一次不能超过123个寄存器地址
//mRealData.ReadSendByte = driverDll.GetDataCommandBytes(this.IOServer, this.IOCommunication, this.IODevices[i], this.IODevices[i].IOParas, null, ref fragment);
}
mRealData.Fragment = (ModbusFragmentStore)fragment;
RealDevices.Add(mRealData);
}
}
return(true);
}
//用户发送下置命令
public override bool SendCommand(IO_SERVER server, IO_COMMUNICATION communication, IO_DEVICE device, IO_PARA para, string value)
{
try
{
Dtu_Data data = new Dtu_Data();
data.DeviceID = device.IO_DEVICE_ID;
//获取value 的字节数组
DeviceDrive driver = DeviceDrives.Find(x => x.DeviceDriverID == device.DEVICE_DRIVER_ID);
if (driver != null)
{
data.datas = driver.GetSendValueBytes(server, this.IOCommunication, device, para, value);
this.DeviceException("error=10011," + device.IO_DEVICE_ADDRESS + "设备驱动不存在");
}
data.ParaID = para.IO_ID;
data.DtuID = device.IO_DEVICE_ADDRESS;
data.DataStatus = DataStatus.WriterData;
string error = "";
bool result = false;
Thread.Sleep(100);//停止10秒，保证之前发送命令已经发送出去
if (!svr.Send(data.DtuID, data.datas, out error, false))
{
this.DeviceException("error=10010" + error);
result = false;
}
else
{
result = true;
}
//信息发送完成的事件
DataSended(server, this.IOCommunication, device, para, value, result);
return(true);
///接收的数据
}
catch (Exception emx)
{
return(false);
}
finally
{
}
}
public override bool InitDriver(IO_SERVER server, IO_COMMUNICATION communication, List <IO_DEVICE> ioDevices, SCADA_DRIVER driver)
{
if (!base.InitDriver(server, communication, ioDevices, driver))
{
return(false);
}
try
{
///DTU配置界面
///初始化驱动控件
if (IsCreateControl)//主要是为了节省内存，在该用的地方创建
{
this.CommunicationControl = new CMDTUControl();
}
//构造获取数据命令的字节数组
for (int i = 0; i < this.IODevices.Count; i++)
{
RealData mRealData = new RealData();
mRealData.Device = this.IODevices[i];
DeviceDrive driverDll = DeviceDrives.Find(x => x.DeviceDriverID == this.IODevices[i].DEVICE_DRIVER_ID);
if (driverDll != null)
{
driverDll.InitDrive(IOServer, IOCommunication, this.IODevices[i], null, this.IODevices[i].DriverInfo);
//IO_DEVICE_ADDRESS中存储的是DTU编号
mRealData.DTUID = this.IODevices[i].IO_DEVICE_ADDRESS;
//获取下发命令的参数
mRealData.ReadSendByte = driverDll.GetDataCommandBytes(this.IOServer, this.IOCommunication, this.IODevices[i], this.IODevices[i].IOParas, null);
}
if (mRealData.ReadSendByte != null && mRealData.ReadSendByte.Count > 0)
{
RealDevices.Add(mRealData);
}
}
}
catch (Exception ex)
{
this.DeviceException("ERROR=10023," + ex.Message);
return(false);
}
return(true);
}
public override bool InitDriver(IO_SERVER server, IO_COMMUNICATION communication, List <IO_DEVICE> ioDevices, SCADA_DRIVER driver)
{
try
{
base.InitDriver(server, communication, ioDevices, driver);
if (IsCreateControl)
{
CommunicationControl = new Modbus_Serial_Ctrl();
CommunicationControl.SetUIParameter(communication.IO_COMM_PARASTRING);
}
//构造获取数据命令的字节数组,Modbus
for (int i = 0; i < this.IODevices.Count; i++)
{
RealData mRealData = new RealData();
mRealData.Device = this.IODevices[i];
DeviceDrive driverDll = DeviceDrives.Find(x => x.DeviceDriverID == this.IODevices[i].DEVICE_DRIVER_ID);
if (driverDll != null)
{
driverDll.InitDrive(IOServer, IOCommunication, this.IODevices[i], null, this.IODevices[i].DriverInfo);
//IO_DEVICE_ADDRESS中存储的是DTU编号
mRealData.SlaveId = this.IODevices[i].IO_DEVICE_ADDRESS;
//数据库中系统编号
mRealData.DEVICEID = this.IODevices[i].IO_DEVICE_ID;
//获取下发命令的参数
mRealData.ReadSendByte = driverDll.GetDataCommandBytes(this.IOServer, this.IOCommunication, this.IODevices[i], this.IODevices[i].IOParas, null);
}
if (mRealData.ReadSendByte != null && mRealData.ReadSendByte.Count > 0)
{
RealDevices.Add(mRealData);
}
}
}
catch
{
return(false);
}
return(true);
}
